May 2 20:09:55 wlt bcm43xx driver
May 2 20:09:55 wlt GSI 22 sharing vector 0xE1 and IRQ 22
May 2 20:09:55 wlt ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 22
May 2 20:09:55 wlt bcm43xx: Chip ID 0x4318, rev 0x2
May 2 20:09:55 wlt bcm43xx: Number of cores: 4
May 2 20:09:55 wlt bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
May 2 20:09:55 wlt bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled
May 2 20:09:55 wlt bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
May 2 20:09:55 wlt bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
May 2 20:09:55 wlt bcm43xx: PHY connected
May 2 20:09:55 wlt bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
May 2 20:09:55 wlt bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
May 2 20:09:55 wlt bcm43xx: Radio turned off
May 2 20:09:55 wlt bcm43xx: Radio turned off
May 2 20:20:35 wlt bcm43xx: PHY connected
May 2 20:20:36 wlt bcm43xx: Radio turned on
May 2 20:20:36 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:20:36 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:20:36 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:20:36 wlt bcm43xx: Chip initialized
May 2 20:20:36 wlt bcm43xx: DMA initialized
May 2 20:20:36 wlt bcm43xx: 80211 cores initialized
May 2 20:20:36 wlt bcm43xx: Keys cleared
May 2 20:20:36 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:20:36 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:20:36 wlt SoftMAC: Start scanning with channel: 1
May 2 20:20:36 wlt SoftMAC: Scanning 14 channels
May 2 20:20:36 wlt SoftMAC: Scanning finished
May 2 20:20:36 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:38:97:e2
May 2 20:20:36 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:20:36 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:20:36 wlt SoftMAC: Open Authentication completed with 00:90:4b:38:97:e2
May 2 20:20:36 wlt SoftMAC: sent association request!
May 2 20:20:36 wlt SoftMAC: associated!
May 2 20:20:37 wlt bcm43xx: set security called
May 2 20:20:37 wlt bcm43xx: .level = 0
May 2 20:20:37 wlt bcm43xx: .enabled = 0
May 2 20:20:37 wlt bcm43xx: .encrypt = 0
May 2 20:20:37 wlt SoftMAC: sent association request!
May 2 20:20:37 wlt SoftMAC: associated!
May 2 20:21:22 wlt bcm43xx: Radio turned off
May 2 20:21:22 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 20:21:22 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:21:22 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:21:22 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 2/512
May 2 20:21:22 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:21:22 wlt bcm43xx: Radio turned on
May 2 20:21:22 wlt bcm43xx: Chip initialized
May 2 20:21:22 wlt bcm43xx: DMA initialized
May 2 20:21:22 wlt bcm43xx: 80211 cores initialized
May 2 20:21:22 wlt bcm43xx: Keys cleared
May 2 20:21:22 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:21:22 wlt SoftMAC: Start scanning with channel: 1
May 2 20:21:22 wlt SoftMAC: Scanning 14 channels
May 2 20:21:22 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:38:97:e2
May 2 20:21:22 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:21:22 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:21:23 wlt SoftMAC: Scanning finished
May 2 20:21:23 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:21:27 wlt bcm43xx: set security called
May 2 20:21:27 wlt bcm43xx: .level = 0
May 2 20:21:27 wlt bcm43xx: .enabled = 0
May 2 20:21:27 wlt bcm43xx: .encrypt = 0
May 2 20:21:27 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:21:34 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:21:46 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:21:58 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:22:10 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:22:19 wlt bcm43xx: Radio turned off
May 2 20:22:19 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 0/64
May 2 20:22:19 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:22:19 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:22:19 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 3/512
May 2 20:22:19 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:22:19 wlt bcm43xx: Radio turned on
May 2 20:22:19 wlt bcm43xx: Chip initialized
May 2 20:22:19 wlt bcm43xx: DMA initialized
May 2 20:22:19 wlt bcm43xx: 80211 cores initialized
May 2 20:22:19 wlt bcm43xx: Keys cleared
May 2 20:22:19 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:22:19 wlt SoftMAC: Start scanning with channel: 1
May 2 20:22:19 wlt SoftMAC: Scanning 14 channels
May 2 20:22:20 wlt SoftMAC: Scanning finished
May 2 20:22:20 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:38:97:e2
May 2 20:22:20 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:22:20 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:22:25 wlt bcm43xx: set security called
May 2 20:22:25 wlt bcm43xx: .level = 0
May 2 20:22:25 wlt bcm43xx: .enabled = 0
May 2 20:22:25 wlt bcm43xx: .encrypt = 0
May 2 20:22:25 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:22:32 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:22:44 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:22:56 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:23:08 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:23:20 wlt SoftMAC: Authentication timed out with 00:90:4b:38:97:e2
May 2 20:23:20 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:23:20 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:25:41 wlt bcm43xx: Radio turned off
May 2 20:25:41 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 20:25:41 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:25:41 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:25:41 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 1/512
May 2 20:25:41 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:25:47 wlt bcm43xx: Radio turned on
May 2 20:25:47 wlt bcm43xx: Chip initialized
May 2 20:25:47 wlt bcm43xx: DMA initialized
May 2 20:25:47 wlt bcm43xx: 80211 cores initialized
May 2 20:25:47 wlt bcm43xx: Keys cleared
May 2 20:25:47 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:25:47 wlt SoftMAC: Start scanning with channel: 1
May 2 20:25:47 wlt SoftMAC: Scanning 14 channels
May 2 20:25:48 wlt SoftMAC: Scanning finished
May 2 20:25:48 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:38:97:e2
May 2 20:25:48 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:25:48 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:25:53 wlt bcm43xx: set security called
May 2 20:25:53 wlt bcm43xx: .level = 0
May 2 20:25:53 wlt bcm43xx: .enabled = 0
May 2 20:25:53 wlt bcm43xx: .encrypt = 0
May 2 20:25:53 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:26:00 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:26:12 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:26:24 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:26:33 wlt bcm43xx: Radio turned off
May 2 20:26:33 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 0/64
May 2 20:26:33 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:26:33 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:26:33 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 1/512
May 2 20:26:33 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:27:53 wlt bcm43xx: Radio turned on
May 2 20:27:53 wlt bcm43xx: Chip initialized
May 2 20:27:53 wlt bcm43xx: DMA initialized
May 2 20:27:53 wlt bcm43xx: 80211 cores initialized
May 2 20:27:53 wlt bcm43xx: Keys cleared
May 2 20:27:53 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:27:53 wlt SoftMAC: Start scanning with channel: 1
May 2 20:27:53 wlt SoftMAC: Scanning 14 channels
May 2 20:27:53 wlt SoftMAC: Scanning finished
May 2 20:27:53 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:38:97:e2
May 2 20:27:53 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:27:53 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:27:59 wlt bcm43xx: set security called
May 2 20:27:59 wlt bcm43xx: .level = 0
May 2 20:27:59 wlt bcm43xx: .enabled = 0
May 2 20:27:59 wlt bcm43xx: .encrypt = 0
May 2 20:27:59 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:28:05 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:28:17 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:28:29 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:28:41 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:28:50 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:28:50 wlt bcm43xx: set security called
May 2 20:28:50 wlt bcm43xx: .active_key = 0
May 2 20:28:50 wlt bcm43xx: .level = 1
May 2 20:28:50 wlt bcm43xx: .enabled = 1
May 2 20:28:50 wlt bcm43xx: .encrypt = 1
May 2 20:28:53 wlt SoftMAC: Authentication timed out with 00:90:4b:38:97:e2
May 2 20:28:53 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:28:53 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:28:53 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:30:01 wlt cron[24325]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
May 2 20:37:34 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:37:34 wlt SoftMAC: Start scanning with channel: 1
May 2 20:37:34 wlt SoftMAC: Scanning 14 channels
May 2 20:37:34 wlt SoftMAC: Scanning finished
May 2 20:37:34 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:0b:4b:da
May 2 20:37:34 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:37:34 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:37:46 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:37:58 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:38:10 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:38:22 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:38:34 wlt SoftMAC: Authentication timed out with 00:90:4b:0b:4b:da
May 2 20:38:34 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:40:01 wlt cron[24362]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
May 2 20:41:22 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:41:22 wlt bcm43xx: set security called
May 2 20:41:22 wlt bcm43xx: .active_key = 0
May 2 20:41:22 wlt bcm43xx: .level = 1
May 2 20:41:22 wlt bcm43xx: .enabled = 1
May 2 20:41:22 wlt bcm43xx: .encrypt = 1
May 2 20:41:22 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:41:33 wlt rc-scripts: ERROR: wrong args ( stpo )
May 2 20:41:33 wlt rc-scripts: Usage: net.eth1 { start|stop|restart }
May 2 20:41:33 wlt rc-scripts: net.eth1 without arguments for full help
May 2 20:41:36 wlt bcm43xx: Radio turned off
May 2 20:41:36 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 20:41:36 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:41:36 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:41:36 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 2/512
May 2 20:41:36 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:41:42 wlt bcm43xx: Radio turned on
May 2 20:41:42 wlt bcm43xx: Chip initialized
May 2 20:41:42 wlt bcm43xx: DMA initialized
May 2 20:41:42 wlt bcm43xx: 80211 cores initialized
May 2 20:41:42 wlt bcm43xx: Keys cleared
May 2 20:41:42 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:41:42 wlt SoftMAC: Start scanning with channel: 1
May 2 20:41:42 wlt SoftMAC: Scanning 14 channels
May 2 20:41:43 wlt SoftMAC: Scanning finished
May 2 20:41:43 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:38:97:e2
May 2 20:41:43 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:41:43 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:41:48 wlt bcm43xx: set security called
May 2 20:41:48 wlt bcm43xx: .level = 0
May 2 20:41:48 wlt bcm43xx: .enabled = 0
May 2 20:41:48 wlt bcm43xx: .encrypt = 0
May 2 20:41:48 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:41:55 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:42:07 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:42:12 wlt bcm43xx: Radio turned off
May 2 20:42:12 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 0/64
May 2 20:42:12 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:42:12 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:42:12 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 1/512
May 2 20:42:12 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:42:20 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:42:20 wlt SoftMAC: Associate: failed to initiate scan. Is device up?
May 2 20:42:20 wlt bcm43xx: set security called
May 2 20:42:20 wlt bcm43xx: .active_key = 0
May 2 20:42:20 wlt bcm43xx: .level = 1
May 2 20:42:20 wlt bcm43xx: .enabled = 1
May 2 20:42:20 wlt bcm43xx: .encrypt = 1
May 2 20:42:20 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:0b:4b:da
May 2 20:42:20 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:42:20 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:42:32 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:42:36 wlt bcm43xx: Radio turned on
May 2 20:42:36 wlt bcm43xx: Chip initialized
May 2 20:42:36 wlt bcm43xx: DMA initialized
May 2 20:42:36 wlt bcm43xx: 80211 cores initialized
May 2 20:42:36 wlt bcm43xx: Keys cleared
May 2 20:42:44 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:42:51 wlt NETDEV WATCHDOG: eth1: transmit timed out
May 2 20:42:51 wlt bcm43xx: Controller RESET (TX timeout) ...
May 2 20:42:51 wlt bcm43xx: Radio turned off
May 2 20:42:51 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 20:42:51 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:42:51 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:42:51 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 1/512
May 2 20:42:51 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:42:51 wlt ACPI: PCI interrupt for device 0000:06:02.0 disabled
May 2 20:42:51 wlt ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 22
May 2 20:42:51 wlt bcm43xx: Chip ID 0x4318, rev 0x2
May 2 20:42:51 wlt bcm43xx: Number of cores: 4
May 2 20:42:51 wlt bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
May 2 20:42:51 wlt bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, enabled
May 2 20:42:51 wlt bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
May 2 20:42:51 wlt bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
May 2 20:42:51 wlt bcm43xx: PHY connected
May 2 20:42:51 wlt bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
May 2 20:42:51 wlt bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
May 2 20:42:51 wlt bcm43xx: Radio turned off
May 2 20:42:51 wlt bcm43xx: Radio turned off
May 2 20:42:51 wlt bcm43xx: PHY connected
May 2 20:42:51 wlt bcm43xx: Radio turned on
May 2 20:42:51 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:42:51 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:42:51 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:42:51 wlt bcm43xx: Chip initialized
May 2 20:42:51 wlt bcm43xx: DMA initialized
May 2 20:42:51 wlt bcm43xx: 80211 cores initialized
May 2 20:42:51 wlt bcm43xx: Keys cleared
May 2 20:42:51 wlt bcm43xx: Controller restarted
May 2 20:42:56 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:42:56 wlt SoftMAC: Open Authentication completed with 00:90:4b:0b:4b:da
May 2 20:42:56 wlt SoftMAC: sent association request!
May 2 20:42:56 wlt SoftMAC: associated!
May 2 20:45:13 wlt bcm43xx: Radio turned off
May 2 20:45:13 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 20:45:13 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:45:13 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:45:13 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 3/512
May 2 20:45:13 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:45:21 wlt bcm43xx: Radio turned on
May 2 20:45:21 wlt bcm43xx: Chip initialized
May 2 20:45:21 wlt bcm43xx: DMA initialized
May 2 20:45:21 wlt bcm43xx: 80211 cores initialized
May 2 20:45:21 wlt bcm43xx: Keys cleared
May 2 20:45:21 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:45:21 wlt SoftMAC: Start scanning with channel: 1
May 2 20:45:21 wlt SoftMAC: Scanning 14 channels
May 2 20:45:21 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:38:97:e2
May 2 20:45:21 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:45:21 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:45:21 wlt SoftMAC: Scanning finished
May 2 20:45:21 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:45:26 wlt bcm43xx: set security called
May 2 20:45:26 wlt bcm43xx: .level = 0
May 2 20:45:26 wlt bcm43xx: .enabled = 0
May 2 20:45:26 wlt bcm43xx: .encrypt = 0
May 2 20:45:26 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:45:33 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:45:45 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 20:45:46 wlt bcm43xx: Radio turned off
May 2 20:45:46 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 20:45:46 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:45:46 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:45:46 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 3/512
May 2 20:45:46 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:46:03 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:46:03 wlt SoftMAC: Associate: failed to initiate scan. Is device up?
May 2 20:46:07 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:0b:4b:da
May 2 20:46:07 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:46:07 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:46:07 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:46:13 wlt bcm43xx: Radio turned on
May 2 20:46:13 wlt bcm43xx: Chip initialized
May 2 20:46:13 wlt bcm43xx: DMA initialized
May 2 20:46:13 wlt bcm43xx: 80211 cores initialized
May 2 20:46:13 wlt bcm43xx: Keys cleared
May 2 20:46:19 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:46:21 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:46:21 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:46:28 wlt NETDEV WATCHDOG: eth1: transmit timed out
May 2 20:46:28 wlt bcm43xx: Controller RESET (TX timeout) ...
May 2 20:46:28 wlt bcm43xx: Radio turned off
May 2 20:46:28 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 20:46:28 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:46:28 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:46:28 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 1/512
May 2 20:46:28 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:46:28 wlt ACPI: PCI interrupt for device 0000:06:02.0 disabled
May 2 20:46:28 wlt ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 22
May 2 20:46:28 wlt bcm43xx: Chip ID 0x4318, rev 0x2
May 2 20:46:28 wlt bcm43xx: Number of cores: 4
May 2 20:46:28 wlt bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
May 2 20:46:28 wlt bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, enabled
May 2 20:46:28 wlt bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
May 2 20:46:28 wlt bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
May 2 20:46:28 wlt bcm43xx: PHY connected
May 2 20:46:28 wlt bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
May 2 20:46:28 wlt bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
May 2 20:46:28 wlt bcm43xx: Radio turned off
May 2 20:46:28 wlt bcm43xx: Radio turned off
May 2 20:46:28 wlt bcm43xx: PHY connected
May 2 20:46:28 wlt bcm43xx: Radio turned on
May 2 20:46:28 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:46:28 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: -64, index: 109)
May 2 20:46:28 wlt
May 2 20:46:28 wlt Call Trace: <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 20:46:28 wlt <ffffffff8800f3a8>{:bcm43xx:bcm43xx_phy_initb6+1910}
May 2 20:46:28 wlt <ffffffff8801091b>{:bcm43xx:bcm43xx_phy_initg+293} <ffffffff80421ccd>{pci_mmcfg_read+0}
May 2 20:46:28 wlt <ffffffff80421ccd>{pci_mmcfg_read+0} <ffffffff80421ccd>{pci_mmcfg_read+0}
May 2 20:46:28 wlt <ffffffff8030c2e9>{__delay+8} <ffffffff88012a0d>{:bcm43xx:bcm43xx_phy_init+1789}
May 2 20:46:28 wlt <ffffffff88002152>{:bcm43xx:bcm43xx_wireless_core_init+2216}
May 2 20:46:28 wlt <ffffffff88000d5a>{:bcm43xx:bcm43xx_core_disable+26}
May 2 20:46:28 wlt <ffffffff880053ef>{:bcm43xx:bcm43xx_chip_reset+0} <ffffffff88003150>{:bcm43xx:bcm43xx_init_board+786}
May 2 20:46:28 wlt <ffffffff8800545a>{:bcm43xx:bcm43xx_chip_reset+107}
May 2 20:46:28 wlt <ffffffff80236a54>{run_workqueue+197} <ffffffff80236ace>{worker_thread+0}
May 2 20:46:28 wlt <ffffffff80236ace>{worker_thread+0} <ffffffff80236bd3>{worker_thread+261}
May 2 20:46:28 wlt <ffffffff802235cd>{default_wake_function+0} <ffffffff802235cd>{default_wake_function+0}
May 2 20:46:28 wlt <ffffffff80239a4a>{kthread+207} <ffffffff8020a2fe>{child_rip+8}
May 2 20:46:28 wlt <ffffffff8023997b>{kthread+0} <ffffffff8020a2f6>{child_rip+0}
May 2 20:46:28 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:46:28 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: -64, index: 109)
May 2 20:46:28 wlt
May 2 20:46:28 wlt Call Trace: <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 20:46:28 wlt <ffffffff88011524>{:bcm43xx:bcm43xx_phy_initg+3374}
May 2 20:46:28 wlt <ffffffff88012a0d>{:bcm43xx:bcm43xx_phy_init+1789} <ffffffff88002152>{:bcm43xx:bcm43xx_wireless_core_init+2216}
May 2 20:46:28 wlt <ffffffff88000d5a>{:bcm43xx:bcm43xx_core_disable+26}
May 2 20:46:28 wlt <ffffffff880053ef>{:bcm43xx:bcm43xx_chip_reset+0} <ffffffff88003150>{:bcm43xx:bcm43xx_init_board+786}
May 2 20:46:28 wlt <ffffffff8800545a>{:bcm43xx:bcm43xx_chip_reset+107}
May 2 20:46:28 wlt <ffffffff80236a54>{run_workqueue+197} <ffffffff80236ace>{worker_thread+0}
May 2 20:46:28 wlt <ffffffff80236ace>{worker_thread+0} <ffffffff80236bd3>{worker_thread+261}
May 2 20:46:28 wlt <ffffffff802235cd>{default_wake_function+0} <ffffffff802235cd>{default_wake_function+0}
May 2 20:46:28 wlt <ffffffff80239a4a>{kthread+207} <ffffffff8020a2fe>{child_rip+8}
May 2 20:46:28 wlt <ffffffff8023997b>{kthread+0} <ffffffff8020a2f6>{child_rip+0}
May 2 20:46:28 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:46:28 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: -64, index: 109)
May 2 20:46:28 wlt
May 2 20:46:28 wlt Call Trace: <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 20:46:28 wlt <ffffffff8800ca1d>{:bcm43xx:bcm43xx_phy_init_pctl+604}
May 2 20:46:28 wlt <ffffffff880115f9>{:bcm43xx:bcm43xx_phy_initg+3587}
May 2 20:46:28 wlt <ffffffff88012a0d>{:bcm43xx:bcm43xx_phy_init+1789} <ffffffff88002152>{:bcm43xx:bcm43xx_wireless_core_init+2216}
May 2 20:46:28 wlt <ffffffff88000d5a>{:bcm43xx:bcm43xx_core_disable+26}
May 2 20:46:28 wlt <ffffffff880053ef>{:bcm43xx:bcm43xx_chip_reset+0} <ffffffff88003150>{:bcm43xx:bcm43xx_init_board+786}
May 2 20:46:28 wlt <ffffffff8800545a>{:bcm43xx:bcm43xx_chip_reset+107}
May 2 20:46:28 wlt <ffffffff80236a54>{run_workqueue+197} <ffffffff80236ace>{worker_thread+0}
May 2 20:46:28 wlt <ffffffff80236ace>{worker_thread+0} <ffffffff80236bd3>{worker_thread+261}
May 2 20:46:28 wlt <ffffffff802235cd>{default_wake_function+0} <ffffffff802235cd>{default_wake_function+0}
May 2 20:46:28 wlt <ffffffff80239a4a>{kthread+207} <ffffffff8020a2fe>{child_rip+8}
May 2 20:46:28 wlt <ffffffff8023997b>{kthread+0} <ffffffff8020a2f6>{child_rip+0}
May 2 20:46:28 wlt bcm43xx: Chip initialized
May 2 20:46:28 wlt bcm43xx: DMA initialized
May 2 20:46:28 wlt bcm43xx: 80211 cores initialized
May 2 20:46:28 wlt bcm43xx: Keys cleared
May 2 20:46:28 wlt bcm43xx: Controller restarted
May 2 20:46:31 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:46:31 wlt SoftMAC: Open Authentication completed with 00:90:4b:0b:4b:da
May 2 20:46:31 wlt SoftMAC: sent association request!
May 2 20:46:31 wlt SoftMAC: sent association request!
May 2 20:46:31 wlt SoftMAC: sent association request!
May 2 20:46:31 wlt SoftMAC: sent association request!
May 2 20:46:31 wlt SoftMAC: associated!
May 2 20:47:31 wlt bcm43xx: Radio turned off
May 2 20:47:31 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 20:47:31 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:47:31 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:47:31 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 2/512
May 2 20:47:31 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:47:31 wlt ACPI: PCI interrupt for device 0000:06:02.0 disabled
May 2 20:47:31 wlt rc-scripts: WARNING: net.eth1 has not yet been started.
May 2 20:48:26 wlt bcm43xx driver
May 2 20:48:26 wlt ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 22
May 2 20:48:26 wlt bcm43xx: Chip ID 0x4318, rev 0x2
May 2 20:48:26 wlt bcm43xx: Number of cores: 4
May 2 20:48:26 wlt bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
May 2 20:48:26 wlt bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, enabled
May 2 20:48:26 wlt bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
May 2 20:48:26 wlt bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
May 2 20:48:26 wlt bcm43xx: PHY connected
May 2 20:48:26 wlt bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
May 2 20:48:26 wlt bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
May 2 20:48:26 wlt bcm43xx: Radio turned off
May 2 20:48:26 wlt bcm43xx: Radio turned off
May 2 20:48:26 wlt bcm43xx: PHY connected
May 2 20:48:26 wlt bcm43xx: Radio turned on
May 2 20:48:27 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:48:27 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:48:27 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:48:27 wlt bcm43xx: Chip initialized
May 2 20:48:27 wlt bcm43xx: ERROR: This card does not support PIO operation mode. Please use DMA mode (module parameter pio=0).
May 2 20:48:27 wlt bcm43xx: Radio turned off
May 2 20:48:27 wlt bcm43xx: Radio turned on
May 2 20:48:27 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:48:27 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:48:27 wlt bcm43xx: Chip initialized
May 2 20:48:27 wlt bcm43xx: ERROR: This card does not support PIO operation mode. Please use DMA mode (module parameter pio=0).
May 2 20:48:27 wlt bcm43xx: Radio turned off
May 2 20:48:27 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:48:27 wlt SoftMAC: Associate: failed to initiate scan. Is device up?
May 2 20:48:37 wlt bcm43xx: set security called
May 2 20:48:37 wlt bcm43xx: .active_key = 0
May 2 20:48:37 wlt bcm43xx: .level = 1
May 2 20:48:37 wlt bcm43xx: .enabled = 1
May 2 20:48:37 wlt bcm43xx: .encrypt = 1
May 2 20:48:37 wlt rc-scripts: Trying to force preferred in case they are hidden
May 2 20:48:37 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:48:37 wlt SoftMAC: Associate: failed to initiate scan. Is device up?
May 2 20:48:40 wlt ACPI: PCI interrupt for device 0000:06:02.0 disabled
May 2 20:48:47 wlt rc-scripts: Failed to associate with any preferred access points on eth1
May 2 20:48:47 wlt rc-scripts: eth1 does not support setting the mode to "ad-hoc"
May 2 20:48:47 wlt rc-scripts: Failed to configure wireless for eth1
May 2 20:48:47 wlt rc-scripts: WARNING: net.eth1 has not yet been started.
May 2 20:50:01 wlt cron[28033]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
May 2 20:51:37 wlt bcm43xx driver
May 2 20:51:37 wlt ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 22
May 2 20:51:37 wlt bcm43xx: Chip ID 0x4318, rev 0x2
May 2 20:51:37 wlt bcm43xx: Number of cores: 4
May 2 20:51:37 wlt bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
May 2 20:51:37 wlt bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, enabled
May 2 20:51:37 wlt bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
May 2 20:51:37 wlt bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
May 2 20:51:37 wlt bcm43xx: PHY connected
May 2 20:51:37 wlt bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
May 2 20:51:37 wlt bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
May 2 20:51:37 wlt bcm43xx: Radio turned off
May 2 20:51:37 wlt bcm43xx: Radio turned off
May 2 20:51:37 wlt bcm43xx: PHY connected
May 2 20:51:37 wlt bcm43xx: Radio turned on
May 2 20:51:38 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:51:38 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:51:38 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:51:38 wlt bcm43xx: Chip initialized
May 2 20:51:38 wlt bcm43xx: DMA initialized
May 2 20:51:38 wlt bcm43xx: 80211 cores initialized
May 2 20:51:38 wlt bcm43xx: Keys cleared
May 2 20:51:38 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 20:51:38 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:51:38 wlt SoftMAC: Start scanning with channel: 1
May 2 20:51:38 wlt SoftMAC: Scanning 14 channels
May 2 20:51:38 wlt SoftMAC: Scanning finished
May 2 20:51:38 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:0b:4b:da
May 2 20:51:38 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:51:38 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:51:38 wlt SoftMAC: Open Authentication completed with 00:90:4b:0b:4b:da
May 2 20:51:38 wlt SoftMAC: sent association request!
May 2 20:51:38 wlt SoftMAC: associated!
May 2 20:51:39 wlt bcm43xx: set security called
May 2 20:51:39 wlt bcm43xx: .active_key = 0
May 2 20:51:39 wlt bcm43xx: .level = 1
May 2 20:51:39 wlt bcm43xx: .enabled = 1
May 2 20:51:39 wlt bcm43xx: .encrypt = 1
May 2 20:51:39 wlt SoftMAC: sent association request!
May 2 20:51:44 wlt SoftMAC: assoc request timed out!
May 2 20:52:30 wlt bcm43xx: Radio turned off
May 2 20:52:30 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 20:52:30 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 20:52:30 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 20:52:30 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 2/512
May 2 20:52:30 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 20:54:06 wlt bcm43xx: Radio turned on
May 2 20:54:06 wlt bcm43xx: Chip initialized
May 2 20:54:06 wlt bcm43xx: DMA initialized
May 2 20:54:06 wlt bcm43xx: 80211 cores initialized
May 2 20:54:06 wlt bcm43xx: Keys cleared
May 2 20:54:07 wlt SoftMAC: Associate: Scanning for networks first.
May 2 20:54:07 wlt SoftMAC: Start scanning with channel: 1
May 2 20:54:07 wlt SoftMAC: Scanning 14 channels
May 2 20:54:07 wlt SoftMAC: Scanning finished
May 2 20:54:07 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:0b:4b:da
May 2 20:54:07 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:54:07 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:54:13 wlt bcm43xx: set security called
May 2 20:54:13 wlt bcm43xx: .level = 0
May 2 20:54:13 wlt bcm43xx: .enabled = 0
May 2 20:54:13 wlt bcm43xx: .encrypt = 0
May 2 20:54:13 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:54:19 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:54:31 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:54:43 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:54:55 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 20:55:07 wlt SoftMAC: Authentication timed out with 00:90:4b:0b:4b:da
May 2 20:55:07 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:55:07 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:55:14 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 20:55:14 wlt bcm43xx: set security called
May 2 20:55:14 wlt bcm43xx: .active_key = 0
May 2 20:55:14 wlt bcm43xx: .level = 1
May 2 20:55:14 wlt bcm43xx: .enabled = 1
May 2 20:55:14 wlt bcm43xx: .encrypt = 1
May 2 20:55:14 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 21:00:01 wlt cron[29798]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
May 2 21:00:01 wlt cron[29800]: (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly)
May 2 21:00:43 wlt bcm43xx: Radio turned off
May 2 21:00:43 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 21:00:43 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 21:00:43 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 21:00:43 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 1/512
May 2 21:00:43 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 21:00:44 wlt bcm43xx: Radio turned on
May 2 21:00:44 wlt bcm43xx: Chip initialized
May 2 21:00:44 wlt bcm43xx: DMA initialized
May 2 21:00:44 wlt bcm43xx: 80211 cores initialized
May 2 21:00:44 wlt bcm43xx: Keys cleared
May 2 21:00:44 wlt SoftMAC: Associate: Scanning for networks first.
May 2 21:00:44 wlt SoftMAC: Start scanning with channel: 1
May 2 21:00:44 wlt SoftMAC: Scanning 14 channels
May 2 21:00:44 wlt SoftMAC: Scanning finished
May 2 21:00:44 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:38:97:e2
May 2 21:00:44 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 21:00:44 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 21:00:50 wlt bcm43xx: set security called
May 2 21:00:50 wlt bcm43xx: .level = 0
May 2 21:00:50 wlt bcm43xx: .enabled = 0
May 2 21:00:50 wlt bcm43xx: .encrypt = 0
May 2 21:00:50 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 21:00:56 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 21:01:08 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 21:01:12 wlt bcm43xx: Radio turned off
May 2 21:01:12 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 0/64
May 2 21:01:12 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 21:01:12 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 21:01:12 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 1/512
May 2 21:01:12 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 21:01:28 wlt ACPI: PCI interrupt for device 0000:06:02.0 disabled
May 2 21:01:28 wlt rc-scripts: WARNING: net.eth1 has not yet been started.
May 2 21:01:50 wlt bcm43xx driver
May 2 21:01:50 wlt ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 22
May 2 21:01:50 wlt bcm43xx: Chip ID 0x4318, rev 0x2
May 2 21:01:50 wlt bcm43xx: Number of cores: 4
May 2 21:01:50 wlt bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
May 2 21:01:50 wlt bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, enabled
May 2 21:01:50 wlt bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
May 2 21:01:50 wlt bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
May 2 21:01:50 wlt bcm43xx: PHY connected
May 2 21:01:50 wlt bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
May 2 21:01:50 wlt bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
May 2 21:01:50 wlt bcm43xx: Radio turned off
May 2 21:01:50 wlt bcm43xx: Radio turned off
May 2 21:01:51 wlt bcm43xx: PHY connected
May 2 21:01:51 wlt bcm43xx: Radio turned on
May 2 21:01:51 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 21:01:51 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: -128, index: 109)
May 2 21:01:51 wlt
May 2 21:01:51 wlt Call Trace: <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 21:01:51 wlt <ffffffff8800f3a8>{:bcm43xx:bcm43xx_phy_initb6+1910}
May 2 21:01:51 wlt <ffffffff8801091b>{:bcm43xx:bcm43xx_phy_initg+293} <ffffffff80421ccd>{pci_mmcfg_read+0}
May 2 21:01:51 wlt <ffffffff80421ccd>{pci_mmcfg_read+0} <ffffffff80421ccd>{pci_mmcfg_read+0}
May 2 21:01:51 wlt <ffffffff8030c2e5>{__delay+4} <ffffffff88012a0d>{:bcm43xx:bcm43xx_phy_init+1789}
May 2 21:01:51 wlt <ffffffff8046c941>{unix_poll+0} <ffffffff88002152>{:bcm43xx:bcm43xx_wireless_core_init+2216}
May 2 21:01:51 wlt <ffffffff88000d5a>{:bcm43xx:bcm43xx_core_disable+26}
May 2 21:01:51 wlt <ffffffff88003150>{:bcm43xx:bcm43xx_init_board+786}
May 2 21:01:51 wlt <ffffffff8042b7c0>{dev_open+50} <ffffffff8042c903>{dev_change_flags+88}
May 2 21:01:51 wlt <ffffffff80462876>{devinet_ioctl+645} <ffffffff80463a1b>{inet_ioctl+110}
May 2 21:01:51 wlt <ffffffff80422b42>{sock_ioctl+0} <ffffffff80422d0d>{sock_ioctl+459}
May 2 21:01:51 wlt <ffffffff80273c95>{do_ioctl+41} <ffffffff80273f3d>{vfs_ioctl+610}
May 2 21:01:51 wlt <ffffffff80273f8a>{sys_ioctl+60} <ffffffff8020982a>{system_call+126}
May 2 21:01:51 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 21:01:51 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: -128, index: 109)
May 2 21:01:51 wlt
May 2 21:01:51 wlt Call Trace: <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 21:01:51 wlt <ffffffff88011524>{:bcm43xx:bcm43xx_phy_initg+3374}
May 2 21:01:51 wlt <ffffffff88012a0d>{:bcm43xx:bcm43xx_phy_init+1789} <ffffffff8046c941>{unix_poll+0}
May 2 21:01:51 wlt <ffffffff88002152>{:bcm43xx:bcm43xx_wireless_core_init+2216}
May 2 21:01:51 wlt <ffffffff88000d5a>{:bcm43xx:bcm43xx_core_disable+26}
May 2 21:01:51 wlt <ffffffff88003150>{:bcm43xx:bcm43xx_init_board+786}
May 2 21:01:51 wlt <ffffffff8042b7c0>{dev_open+50} <ffffffff8042c903>{dev_change_flags+88}
May 2 21:01:51 wlt <ffffffff80462876>{devinet_ioctl+645} <ffffffff80463a1b>{inet_ioctl+110}
May 2 21:01:51 wlt <ffffffff80422b42>{sock_ioctl+0} <ffffffff80422d0d>{sock_ioctl+459}
May 2 21:01:51 wlt <ffffffff80273c95>{do_ioctl+41} <ffffffff80273f3d>{vfs_ioctl+610}
May 2 21:01:51 wlt <ffffffff80273f8a>{sys_ioctl+60} <ffffffff8020982a>{system_call+126}
May 2 21:01:51 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 21:01:51 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: -128, index: 109)
May 2 21:01:51 wlt
May 2 21:01:51 wlt Call Trace: <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 21:01:51 wlt <ffffffff8800ca1d>{:bcm43xx:bcm43xx_phy_init_pctl+604}
May 2 21:01:51 wlt <ffffffff880115f9>{:bcm43xx:bcm43xx_phy_initg+3587}
May 2 21:01:51 wlt <ffffffff88012a0d>{:bcm43xx:bcm43xx_phy_init+1789} <ffffffff8046c941>{unix_poll+0}
May 2 21:01:51 wlt <ffffffff88002152>{:bcm43xx:bcm43xx_wireless_core_init+2216}
May 2 21:01:51 wlt <ffffffff88000d5a>{:bcm43xx:bcm43xx_core_disable+26}
May 2 21:01:51 wlt <ffffffff88003150>{:bcm43xx:bcm43xx_init_board+786}
May 2 21:01:51 wlt <ffffffff8042b7c0>{dev_open+50} <ffffffff8042c903>{dev_change_flags+88}
May 2 21:01:51 wlt <ffffffff80462876>{devinet_ioctl+645} <ffffffff80463a1b>{inet_ioctl+110}
May 2 21:01:51 wlt <ffffffff80422b42>{sock_ioctl+0} <ffffffff80422d0d>{sock_ioctl+459}
May 2 21:01:51 wlt <ffffffff80273c95>{do_ioctl+41} <ffffffff80273f3d>{vfs_ioctl+610}
May 2 21:01:51 wlt <ffffffff80273f8a>{sys_ioctl+60} <ffffffff8020982a>{system_call+126}
May 2 21:01:51 wlt bcm43xx: Chip initialized
May 2 21:01:51 wlt bcm43xx: DMA initialized
May 2 21:01:51 wlt bcm43xx: 80211 cores initialized
May 2 21:01:51 wlt bcm43xx: Keys cleared
May 2 21:01:51 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 21:01:51 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: -128, index: 109)
May 2 21:01:51 wlt
May 2 21:01:51 wlt Call Trace: <IRQ> <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 21:01:51 wlt <ffffffff88010613>{:bcm43xx:bcm43xx_phy_lo_g_measure+2289}
May 2 21:01:51 wlt <ffffffff88013513>{:bcm43xx:bcm43xx_power_saving_ctl_bits+85}
May 2 21:01:51 wlt <ffffffff88002aab>{:bcm43xx:bcm43xx_periodic_task_handler+243}
May 2 21:01:51 wlt <ffffffff880029b8>{:bcm43xx:bcm43xx_periodic_task_handler+0}
May 2 21:01:51 wlt <ffffffff8022fde2>{run_timer_softirq+383} <ffffffff8022c454>{__do_softirq+68}
May 2 21:01:51 wlt <ffffffff8020a64e>{call_softirq+30} <ffffffff8020bece>{do_softirq+46}
May 2 21:01:51 wlt <ffffffff8022c587>{irq_exit+69} <ffffffff8020be95>{do_IRQ+62}
May 2 21:01:51 wlt <ffffffff80209d8c>{ret_from_intr+0} <EOI> <ffffffff8030b9b5>{copy_page+5}
May 2 21:01:51 wlt <ffffffff802519af>{do_wp_page+535} <ffffffff80252919>{__handle_mm_fault+2276}
May 2 21:01:51 wlt <ffffffff80219899>{do_page_fault+1046} <ffffffff802336d2>{do_sigaction+373}
May 2 21:01:51 wlt <ffffffff8020a145>{error_exit+0}
May 2 21:01:51 wlt SoftMAC: Associate: Scanning for networks first.
May 2 21:01:51 wlt SoftMAC: Start scanning with channel: 1
May 2 21:01:51 wlt SoftMAC: Scanning 14 channels
May 2 21:01:52 wlt SoftMAC: Scanning finished
May 2 21:01:52 wlt SoftMAC: Associate: Scanning for networks first.
May 2 21:01:52 wlt SoftMAC: Start scanning with channel: 1
May 2 21:01:52 wlt SoftMAC: Scanning 14 channels
May 2 21:01:52 wlt SoftMAC: Scanning finished
May 2 21:01:52 wlt SoftMAC: Associate: Scanning for networks first.
May 2 21:01:52 wlt SoftMAC: Start scanning with channel: 1
May 2 21:01:52 wlt SoftMAC: Scanning 14 channels
May 2 21:01:52 wlt SoftMAC: Scanning finished
May 2 21:01:52 wlt SoftMAC: Unable to find matching network after scan!
May 2 21:02:01 wlt bcm43xx: set security called
May 2 21:02:01 wlt bcm43xx: .active_key = 0
May 2 21:02:01 wlt bcm43xx: .level = 1
May 2 21:02:01 wlt bcm43xx: .enabled = 1
May 2 21:02:01 wlt bcm43xx: .encrypt = 1
May 2 21:02:01 wlt SoftMAC: Associate: Scanning for networks first.
May 2 21:02:01 wlt SoftMAC: Start scanning with channel: 1
May 2 21:02:01 wlt SoftMAC: Scanning 14 channels
May 2 21:02:01 wlt rc-scripts: Trying to force preferred in case they are hidden
May 2 21:02:02 wlt SoftMAC: Scanning finished
May 2 21:02:02 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:0b:4b:da
May 2 21:02:02 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 21:02:02 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 21:02:02 wlt SoftMAC: Open Authentication completed with 00:90:4b:0b:4b:da
May 2 21:02:02 wlt SoftMAC: sent association request!
May 2 21:02:02 wlt SoftMAC: associated!
May 2 21:05:36 wlt bcm43xx: Radio turned off
May 2 21:05:36 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 21:05:36 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 21:05:36 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 21:05:36 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 2/512
May 2 21:05:36 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512
May 2 21:05:36 wlt ACPI: PCI interrupt for device 0000:06:02.0 disabled
May 2 21:06:02 wlt bcm43xx driver
May 2 21:06:02 wlt ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 22
May 2 21:06:02 wlt bcm43xx: Chip ID 0x4318, rev 0x2
May 2 21:06:02 wlt bcm43xx: Number of cores: 4
May 2 21:06:02 wlt bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
May 2 21:06:02 wlt bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, enabled
May 2 21:06:02 wlt bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
May 2 21:06:02 wlt bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
May 2 21:06:02 wlt bcm43xx: PHY connected
May 2 21:06:02 wlt bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
May 2 21:06:02 wlt bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
May 2 21:06:02 wlt bcm43xx: Radio turned off
May 2 21:06:02 wlt bcm43xx: Radio turned off
May 2 21:06:03 wlt bcm43xx: PHY connected
May 2 21:06:03 wlt bcm43xx: Radio turned on
May 2 21:06:03 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 21:06:03 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: 24, index: 109)
May 2 21:06:03 wlt
May 2 21:06:03 wlt Call Trace: <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 21:06:03 wlt <ffffffff8800f3a8>{:bcm43xx:bcm43xx_phy_initb6+1910}
May 2 21:06:03 wlt <ffffffff8801091b>{:bcm43xx:bcm43xx_phy_initg+293} <ffffffff80421ccd>{pci_mmcfg_read+0}
May 2 21:06:03 wlt <ffffffff80421ccd>{pci_mmcfg_read+0} <ffffffff80421ccd>{pci_mmcfg_read+0}
May 2 21:06:03 wlt <ffffffff8030c2e9>{__delay+8} <ffffffff88012a0d>{:bcm43xx:bcm43xx_phy_init+1789}
May 2 21:06:03 wlt <ffffffff8046c941>{unix_poll+0} <ffffffff88002152>{:bcm43xx:bcm43xx_wireless_core_init+2216}
May 2 21:06:03 wlt <ffffffff88000d5a>{:bcm43xx:bcm43xx_core_disable+26}
May 2 21:06:03 wlt <ffffffff88003150>{:bcm43xx:bcm43xx_init_board+786}
May 2 21:06:03 wlt <ffffffff8042b7c0>{dev_open+50} <ffffffff8042c903>{dev_change_flags+88}
May 2 21:06:03 wlt <ffffffff80462876>{devinet_ioctl+645} <ffffffff80463a1b>{inet_ioctl+110}
May 2 21:06:03 wlt <ffffffff80422b42>{sock_ioctl+0} <ffffffff80422d0d>{sock_ioctl+459}
May 2 21:06:03 wlt <ffffffff80273c95>{do_ioctl+41} <ffffffff80273f3d>{vfs_ioctl+610}
May 2 21:06:03 wlt <ffffffff80273f8a>{sys_ioctl+60} <ffffffff8020982a>{system_call+126}
May 2 21:06:03 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 21:06:03 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: 24, index: 109)
May 2 21:06:03 wlt
May 2 21:06:03 wlt Call Trace: <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 21:06:03 wlt <ffffffff88011524>{:bcm43xx:bcm43xx_phy_initg+3374}
May 2 21:06:03 wlt <ffffffff88012a0d>{:bcm43xx:bcm43xx_phy_init+1789} <ffffffff8046c941>{unix_poll+0}
May 2 21:06:03 wlt <ffffffff88002152>{:bcm43xx:bcm43xx_wireless_core_init+2216}
May 2 21:06:03 wlt <ffffffff88000d5a>{:bcm43xx:bcm43xx_core_disable+26}
May 2 21:06:03 wlt <ffffffff88003150>{:bcm43xx:bcm43xx_init_board+786}
May 2 21:06:03 wlt <ffffffff8042b7c0>{dev_open+50} <ffffffff8042c903>{dev_change_flags+88}
May 2 21:06:03 wlt <ffffffff80462876>{devinet_ioctl+645} <ffffffff80463a1b>{inet_ioctl+110}
May 2 21:06:03 wlt <ffffffff80422b42>{sock_ioctl+0} <ffffffff80422d0d>{sock_ioctl+459}
May 2 21:06:03 wlt <ffffffff80273c95>{do_ioctl+41} <ffffffff80273f3d>{vfs_ioctl+610}
May 2 21:06:03 wlt <ffffffff80273f8a>{sys_ioctl+60} <ffffffff8020982a>{system_call+126}
May 2 21:06:03 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 21:06:03 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: 24, index: 109)
May 2 21:06:03 wlt
May 2 21:06:03 wlt Call Trace: <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 21:06:03 wlt <ffffffff8800ca1d>{:bcm43xx:bcm43xx_phy_init_pctl+604}
May 2 21:06:03 wlt <ffffffff880115f9>{:bcm43xx:bcm43xx_phy_initg+3587}
May 2 21:06:03 wlt <ffffffff88012a0d>{:bcm43xx:bcm43xx_phy_init+1789} <ffffffff8046c941>{unix_poll+0}
May 2 21:06:03 wlt <ffffffff88002152>{:bcm43xx:bcm43xx_wireless_core_init+2216}
May 2 21:06:03 wlt <ffffffff88000d5a>{:bcm43xx:bcm43xx_core_disable+26}
May 2 21:06:03 wlt <ffffffff88003150>{:bcm43xx:bcm43xx_init_board+786}
May 2 21:06:03 wlt <ffffffff8042b7c0>{dev_open+50} <ffffffff8042c903>{dev_change_flags+88}
May 2 21:06:03 wlt <ffffffff80462876>{devinet_ioctl+645} <ffffffff80463a1b>{inet_ioctl+110}
May 2 21:06:03 wlt <ffffffff80422b42>{sock_ioctl+0} <ffffffff80422d0d>{sock_ioctl+459}
May 2 21:06:03 wlt <ffffffff80273c95>{do_ioctl+41} <ffffffff80273f3d>{vfs_ioctl+610}
May 2 21:06:03 wlt <ffffffff80273f8a>{sys_ioctl+60} <ffffffff8020982a>{system_call+126}
May 2 21:06:03 wlt bcm43xx: Chip initialized
May 2 21:06:03 wlt bcm43xx: DMA initialized
May 2 21:06:03 wlt bcm43xx: 80211 cores initialized
May 2 21:06:03 wlt bcm43xx: Keys cleared
May 2 21:06:03 wlt bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
May 2 21:06:03 wlt bcm43xx: WARNING: Writing invalid LOpair (low: 0, high: 30, index: 109)
May 2 21:06:03 wlt
May 2 21:06:03 wlt Call Trace: <IRQ> <ffffffff8800f94e>{:bcm43xx:bcm43xx_phy_lo_adjust+723}
May 2 21:06:03 wlt <ffffffff88010613>{:bcm43xx:bcm43xx_phy_lo_g_measure+2289}
May 2 21:06:03 wlt <ffffffff88013513>{:bcm43xx:bcm43xx_power_saving_ctl_bits+85}
May 2 21:06:03 wlt <ffffffff88002aab>{:bcm43xx:bcm43xx_periodic_task_handler+243}
May 2 21:06:03 wlt <ffffffff880029b8>{:bcm43xx:bcm43xx_periodic_task_handler+0}
May 2 21:06:03 wlt <ffffffff8022fde2>{run_timer_softirq+383} <ffffffff8022c454>{__do_softirq+68}
May 2 21:06:03 wlt <ffffffff8020a64e>{call_softirq+30} <ffffffff8020bece>{do_softirq+46}
May 2 21:06:03 wlt <ffffffff8022c587>{irq_exit+69} <ffffffff8020be95>{do_IRQ+62}
May 2 21:06:03 wlt <ffffffff80209d8c>{ret_from_intr+0} <EOI>
May 2 21:06:03 wlt SoftMAC: Associate: Scanning for networks first.
May 2 21:06:03 wlt SoftMAC: Start scanning with channel: 1
May 2 21:06:03 wlt SoftMAC: Scanning 14 channels
May 2 21:06:04 wlt SoftMAC: Scanning finished
May 2 21:06:04 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:38:97:e2
May 2 21:06:04 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 21:06:04 wlt SoftMAC: Sent Authentication Request to 00:90:4b:38:97:e2.
May 2 21:06:04 wlt SoftMAC: Open Authentication completed with 00:90:4b:38:97:e2
May 2 21:06:04 wlt SoftMAC: sent association request!
May 2 21:06:04 wlt SoftMAC: associated!
May 2 21:06:04 wlt bcm43xx: set security called
May 2 21:06:04 wlt bcm43xx: .level = 0
May 2 21:06:04 wlt bcm43xx: .enabled = 0
May 2 21:06:04 wlt bcm43xx: .encrypt = 0
May 2 21:06:04 wlt SoftMAC: sent association request!
May 2 21:06:04 wlt SoftMAC: associated!
May 2 21:07:10 wlt SoftMAC: sent association request!
May 2 21:07:10 wlt bcm43xx: set security called
May 2 21:07:10 wlt bcm43xx: .active_key = 0
May 2 21:07:10 wlt bcm43xx: .level = 1
May 2 21:07:10 wlt bcm43xx: .enabled = 1
May 2 21:07:10 wlt bcm43xx: .encrypt = 1
May 2 21:07:10 wlt SoftMAC: Associate: Scanning for networks first.
May 2 21:07:10 wlt SoftMAC: Start scanning with channel: 1
May 2 21:07:10 wlt SoftMAC: Scanning 14 channels
May 2 21:07:10 wlt SoftMAC: Scanning finished
May 2 21:07:10 wlt SoftMAC: Queueing Authentication Request to 00:90:4b:0b:4b:da
May 2 21:07:10 wlt SoftMAC: cannot associate without being authenticated, requested authentication
May 2 21:07:10 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 21:07:15 wlt SoftMAC: assoc request timed out!
May 2 21:07:22 wlt SoftMAC: Sent Authentication Request to 00:90:4b:0b:4b:da.
May 2 21:07:22 wlt SoftMAC: Open Authentication completed with 00:90:4b:0b:4b:da
May 2 21:07:22 wlt SoftMAC: sent association request!
May 2 21:07:22 wlt SoftMAC: associated!
May 2 21:07:42 wlt eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
May 2 21:08:43 wlt su[750]: Successful su for root by wlt
May 2 21:08:43 wlt su[750]: + pts/3 wlt:root
May 2 21:08:43 wlt su(pam_unix)[750]: session opened for user root by (uid=1001)
May 2 21:10:01 wlt cron[771]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
May 2 21:11:14 wlt bcm43xx: Radio turned off
May 2 21:11:14 wlt bcm43xx: DMA 0x0200 (RX) max used slots: 1/64
May 2 21:11:14 wlt bcm43xx: DMA 0x0260 (TX) max used slots: 0/512
May 2 21:11:14 wlt bcm43xx: DMA 0x0240 (TX) max used slots: 0/512
May 2 21:11:14 wlt bcm43xx: DMA 0x0220 (TX) max used slots: 12/512
May 2 21:11:14 wlt bcm43xx: DMA 0x0200 (TX) max used slots: 0/512