rendered paste body0,0>TESTING IO BOARD 1
0,0>Board 1 I/O FPROM Test
0,0> I/O Board EPROM checksum Test
0,0>ERROR: TEST=I/O FPROM,SUBTEST=I/O Board EPROM checksum ID=a.1
0,0>Component under test: Board 1 Firehose PROM U2501
0,0> POST/iPOST PROM Checksum Error
checksum from prom header = f97d
computed segment checksum = 17d
0,0>
*** Aborting Test List due to severe error ***
AFter that, when POST completes, I get this:
0,0>Checking Power Supply Configuration
0,0>Power is adequate, load 3 ps 2
0,0> Check Board Present Test
0,0> Board Present Interrupt Test
0,0>POST Failed
0,0>
0,0> System Board Status
0,0>-----------------------------------------------------------------
0,0> Slot Board Status Board Type Failures
0,0>-----------------------------------------------------------------
0,0> 0 | Normal |+CPU/Memory |
0,0> 1 | Online/failure | IO Type 1 | FPROM
0,0> 2 | Normal |+CPU/Memory |
0,0> 3 | Not installed | |
0,0> 4 | Not installed | |
0,0> 5 | Not installed | |
0,0> 6 | Not installed | |
0,0> 7 | Not installed | |
0,0> 16 | Normal | Clock Board |
0,0>-----------------------------------------------------------------
0,0>
0,0> CPU Module Status
0,0>-----------------------------------------------------------------
0,0> MID OK Cache Speed Version
0,0>-----------------------------------------------------------------
0,0> 0 | y | 8192 | 400 | 00170011.a0000507
0,0> 1 | y | 8192 | 400 | 00170011.a0000507
0,0> 4 | y | 8192 | 400 | 00170011.a0000507
0,0> 5 | y | 8192 | 400 | 00170011.a0000507
0,0>-----------------------------------------------------------------
0,0>System Frequency (MHz),fcpu=400, fmod=200, fsys=80, fgen=400
0,0> Populated Memory Bank Status
0,0> bd # Size Address Way Status
0,0> 0 2048 0 4 Normal
0,0> 0 2048 2 4 Normal
0,0> 2 2048 1 4 Normal
0,0> 2 2048 3 4 Normal
0,0>
0,0>
POST COMPLETE