Advertising
- Untitled
- Thursday, May 31st, 2007 at 2:11:33am UTC
- # /etc/X11/xorg.conf (xorg X Window System server configuration file)
- #
- # This file was generated by dexconf, the Debian X Configuration tool, using
- # values from the debconf database.
- #
- # Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
- # (Type "man /etc/X11/xorg.conf" at the shell prompt.)
- #
- # This file is automatically updated on xserver-xorg package upgrades *only*
- # if it has not been modified since the last upgrade of the xserver-xorg
- # package.
- #
- # If you have edited this file but would like it to be automatically updated
- # again, run the following command:
- # sudo dpkg-reconfigure -phigh xserver-xorg
- #Section "Device"
- # Identifier "aticonfig-Device[0]"
- # Driver "fglrx"
- # Option "VideoOverlay" "on"#
- # Option "OpenGLOverlay" "off"
- #EndSection
- Section "ServerLayout"
- Identifier "Default Layout"
- screen 0 "aticonfig-Screen[0]" 0 0
- Inputdevice "Generic Keyboard"
- Inputdevice "Configured Mouse"
- Inputdevice "stylus" "SendCoreEvents"
- Inputdevice "cursor" "SendCoreEvents"
- Inputdevice "eraser" "SendCoreEvents"
- Inputdevice "Synaptics Touchpad"
- EndSection
- Section "Files"
- # path to defoma fonts
- Fontpath "/usr/share/X11/fonts/misc"
- Fontpath "/usr/share/X11/fonts/cyrillic"
- Fontpath "/usr/share/X11/fonts/100dpi/:unscaled"
- Fontpath "/usr/share/X11/fonts/75dpi/:unscaled"
- Fontpath "/usr/share/X11/fonts/Type1"
- Fontpath "/usr/share/X11/fonts/100dpi"
- Fontpath "/usr/share/X11/fonts/75dpi"
- Fontpath "/usr/share/fonts/X11/misc"
- Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
- EndSection
- Section "Module"
- Load "i2c"
- Load "bitmap"
- Load "ddc"
- Load "dri"
- Load "extmod"
- Load "freetype"
- Load "int10"
- Load "type1"
- Load "vbe"
- Load "glx"
- EndSection
- Section "InputDevice"
- Identifier "Generic Keyboard"
- Driver "kbd"
- Option "CoreKeyboard"
- Option "XkbRules" "xorg"
- Option "XkbModel" "pc105"
- Option "XkbLayout" "gb"
- Option "XkbOptions" "lv3:ralt_switch"
- EndSection
- Section "InputDevice"
- Identifier "Configured Mouse"
- Driver "mouse"
- Option "CorePointer"
- Option "Device" "/dev/input/mice"
- Option "Protocol" "ExplorerPS/2"
- Option "ZAxisMapping" "4 5"
- Option "Emulate3Buttons" "true"
- EndSection
- Section "InputDevice"
- Identifier "Synaptics Touchpad"
- Driver "synaptics"
- Option "SendCoreEvents" "true"
- Option "Device" "/dev/psaux"
- Option "Protocol" "auto-dev"
- Option "HorizScrollDelta" "0"
- EndSection
- Section "InputDevice"
- # /dev/input/event
- # for USB
- Identifier "stylus"
- Driver "wacom"
- Option "Device" "/dev/wacom"# Change to
- Option "Type" "stylus"
- Option "ForceDevice" "ISDV4"# Tablet PC ONLY
- EndSection
- Section "InputDevice"
- # /dev/input/event
- # for USB
- Identifier "eraser"
- Driver "wacom"
- Option "Device" "/dev/wacom"# Change to
- Option "Type" "eraser"
- Option "ForceDevice" "ISDV4"# Tablet PC ONLY
- EndSection
- Section "InputDevice"
- # /dev/input/event
- # for USB
- Identifier "cursor"
- Driver "wacom"
- Option "Device" "/dev/wacom"# Change to
- Option "Type" "cursor"
- Option "ForceDevice" "ISDV4"# Tablet PC ONLY
- EndSection
- Section "Monitor"
- Identifier "Generic Monitor"
- Option "DPMS"
- EndSection
- Section "Monitor"
- Identifier "aticonfig-Monitor[0]"
- Option "VendorName" "ATI Proprietary Driver"
- Option "ModelName" "Generic Autodetecting Monitor"
- Option "DPMS" "true"
- EndSection
- Section "Device"
- # Option "EnablePrivateBackZ" "yes" #Enable 3d support <= May Not Work
- # Option "HSync2" "65" #This sets the horizontal sync for the secondary display.
- # Option "VRefresh2" "60" #This sets the refresh rate of the secondary display.
- Identifier "aticonfig-Device[0]"
- Driver "fglrx"
- Option "VideoOverlay" "on"
- Option "OpenGLOverlay" "off"
- Option "DesktopSetup" "horizontal"#Enable Big Desktop
- Option "Mode2" "1280x1024"#Resolution for second monitor
- Busid "PCI:1:0:0"
- EndSection
- Section "Screen"
- # Device "ATI Technologies, Inc. Radeon Mobility X700 (RV410 PCIE)"
- Identifier "Default Screen"
- Device "aticonfig-Device[0]"
- Monitor "Generic Monitor"
- Defaultdepth 24
- SubSection "Display"
- Depth 1
- Modes "1280x800" "1024x768" "800x600" "640x480"
- EndSubSection
- SubSection "Display"
- Depth 4
- Modes "1280x800" "1024x768" "800x600" "640x480"
- EndSubSection
- SubSection "Display"
- Depth 8
- Modes "1280x800" "1024x768" "800x600" "640x480"
- EndSubSection
- SubSection "Display"
- Depth 15
- Modes "1280x800" "1024x768" "800x600" "640x480"
- EndSubSection
- SubSection "Display"
- Depth 16
- Modes "1280x800" "1024x768" "800x600" "640x480"
- EndSubSection
- SubSection "Display"
- Depth 24
- Modes "1280x800" "1024x768" "800x600" "640x480"
- EndSubSection
- EndSection
- Section "Screen"
- Identifier "aticonfig-Screen[0]"
- Device "aticonfig-Device[0]"
- Monitor "aticonfig-Monitor[0]"
- Defaultdepth 24
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
- EndSection
- Section "DRI"
- Mode 0666
- EndSection
- Section "Extensions"
- Option "Composite" "0"
- EndSection
advertising
Update the Post
Either update this post and resubmit it with changes, or make a new post.
You may also comment on this post.
Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.
