rendered paste body[globals]
#include globals_custom.conf
VM_PREFIX = *
RINGTIMER = 15
REGTIME = 7:55-17:05
REGDAYS = mon-fri
RECORDEXTEN = ""
PARKNOTIFY = SIP/200
OUT_3 = ZAP/2
OUT_1 = ZAP/1
OUTPREFIX_3 =
OUTPREFIX_1 =
OUTMAXCHANS_3 =
OUTMAXCHANS_1 = 2
OUTCID_3 =
OUTCID_1 = 912-727-4411
OPERATOR =
NULL = ""
IN_OVERRIDE = forcereghours
INCOMING = GRP-1
FAX_RX_EMAIL = fax@mydomain.com
FAX_RX = system
FAX =
DIRECTORY_OPTS =
DIRECTORY = last
DIAL_OUT = 9
DIAL_OPTIONS = tr
DIALOUTIDS = 1/3/
CALLFILENAME = ""
AFTER_INCOMING = EXT-100
[ext-did]
include => ext-did-custom
exten => s,1,SetVar(FROM_DID=s)
exten => s,2,Goto(ext-local,200,1)
exten => _X.,1,Goto(s)
[ext-group]
include => ext-group-custom
exten => 1,1,Macro(rg-group,ringall,30,,200)
exten => 1,2,Goto(ext-local,200,1) ; jump
[ext-local]
include => ext-local-custom
exten => 200,1,Macro(exten-vm,200,200)
exten => ${VM_PREFIX}200,1,Macro(vm,200)
exten => 200,hint,SIP/200
[outbound-allroutes]
include => outbound-allroutes-custom
include => outrt-001-local
include => outrt-002-ld
[outbound-trunks]
include => outbound-trunks-custom
exten => _${DIAL_OUT_1}.,1,Macro(dialout,1,${EXTEN})
[outrt-001-local]
include => outrt-001-local-custom
exten => _NXXNXXXXXX,1,Macro(dialout-trunk,3,${EXTEN},)
exten => _NXXNXXXXXX,2,Macro(dialout-trunk,1,${EXTEN},)
exten => _NXXNXXXXXX,3,Macro(outisbusy) ; No available circuits
exten => _NXXXXXX,1,Macro(dialout-trunk,3,${EXTEN},)
exten => _NXXXXXX,2,Macro(dialout-trunk,1,${EXTEN},)
exten => _NXXXXXX,3,Macro(outisbusy) ; No available circuits
[outrt-002-ld]
include => outrt-002-ld-custom
exten => _1NXXNXXXXXX,1,Macro(dialout-trunk,1,${EXTEN},)
exten => _1NXXNXXXXXX,2,Macro(dialout-trunk,2,${EXTEN},)
exten => _1NXXNXXXXXX,3,Macro(outisbusy) ; No available circuits
exten => _NXXNXXXXXX,1,Macro(dialout-trunk,1,${EXTEN},)
exten => _NXXNXXXXXX,2,Macro(dialout-trunk,2,${EXTEN},)
exten => _NXXNXXXXXX,3,Macro(outisbusy) ; No available circuits
####################################################################
# this is zapata-auto.conf #
####################################################################
; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
callerid=asreceived
; Span 1: WCFXO/0 "Generic Clone Board 1" RED
signalling=fxs_ks
; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 1
context=from-pstn
group=0
channel => 1
; Span 2: WCFXO/1 "Generic Clone Board 2" RED
signalling=fxs_ks
; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 2
context=from-pstn
group=0
channel => 2
; Span 3: ZTDUMMY/1 "ZTDUMMY/1 1"
######################################################################
# This is zapata.conf #
######################################################################
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs
#include zapata_additional.conf