rendered paste bodysmartctl version 5.37 [i686-mingw32-xp-sp2] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST3160023A
Serial Number: 5JS6GQ85
Firmware Version: 8.01
User Capacity: 160,041,885,696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Mon May 28 23:05:09 2007 EST
SMART support is: Available - device has SMART capability.
Enabled status cached by OS, trying SMART RETURN STATUS cmd.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 055 053 006 Pre-fail Always - 68659408
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 0
5 Reallocated_Sector_Ct 0x0033 098 098 036 Pre-fail Always - 86
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 155676638
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 12147
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 123
194 Temperature_Celsius 0x0022 054 058 000 Old_age Always - 54
195 Hardware_ECC_Recovered 0x001a 055 053 000 Old_age Always - 68659408
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 27
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 27
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 099 252 000 Old_age Always - 1
SMART Error Log Version: 1
ATA Error Count: 229 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 229 occurred at disk power-on lifetime: 12145 hours (506 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 3f 67 63 e0 Error: UNC 8 sectors at LBA = 0x0063673f = 6514495
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 67 63 e0 00 06:04:07.031 READ DMA EXT
25 00 01 00 00 00 e0 00 06:04:02.999 READ DMA EXT
25 00 01 00 00 00 e0 00 06:04:02.921 READ DMA EXT
25 00 01 00 00 00 e0 00 06:04:02.803 READ DMA EXT
25 00 80 9f 2c 24 e0 00 06:04:02.803 READ DMA EXT
Error 228 occurred at disk power-on lifetime: 12145 hours (506 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 3f 67 63 e0 Error: UNC 8 sectors at LBA = 0x0063673f = 6514495
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 67 63 e0 00 06:04:02.767 READ DMA EXT
25 00 80 bf 68 63 e0 00 06:04:02.999 READ DMA EXT
35 00 08 3f aa 61 e0 00 06:04:02.921 WRITE DMA EXT
35 00 08 0f aa 61 e0 00 06:04:02.803 WRITE DMA EXT
35 00 08 c7 a9 61 e0 00 06:04:02.803 WRITE DMA EXT
Error 227 occurred at disk power-on lifetime: 12145 hours (506 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 3f 67 63 e0 Error: UNC 8 sectors at LBA = 0x0063673f = 6514495
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 67 63 e0 00 06:03:58.496 READ DMA EXT
25 00 01 00 00 00 e0 00 06:03:58.496 READ DMA EXT
25 00 01 00 00 00 e0 00 06:03:58.485 READ DMA EXT
35 00 05 8f 5c e9 e0 00 06:03:58.484 WRITE DMA EXT
35 00 08 37 00 5e e0 00 06:03:58.483 WRITE DMA EXT
Error 226 occurred at disk power-on lifetime: 12145 hours (506 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 3f 67 63 e0 Error: UNC 8 sectors at LBA = 0x0063673f = 6514495
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 3f 67 63 e0 00 06:03:54.385 READ DMA EXT
25 00 01 00 00 00 e0 00 06:03:54.378 READ DMA EXT
25 00 01 00 00 00 e0 00 06:03:54.378 READ DMA EXT
35 00 05 8f 5c e9 e0 00 06:03:54.378 WRITE DMA EXT
35 00 05 7f b3 ac e0 00 06:03:54.357 WRITE DMA EXT
Error 225 occurred at disk power-on lifetime: 12145 hours (506 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 3f 67 63 e0 Error: UNC 128 sectors at LBA = 0x0063673f = 6514495
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 3f 67 63 e0 00 06:03:50.122 READ DMA EXT
25 00 80 bf 66 63 e0 00 06:03:50.120 READ DMA EXT
25 00 80 3f 66 63 e0 00 06:03:50.119 READ DMA EXT
25 00 08 37 65 63 e0 00 06:03:50.118 READ DMA EXT
25 00 08 2f 65 63 e0 00 06:03:50.117 READ DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.