rendered paste body[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri May 18 23:39:08 UTC 2007 (Ubuntu 2.6.17-11.38-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000007f40000 (usable)
[17179569.184000] BIOS-e820: 0000000007f40000 - 0000000007f50000 (ACPI data)
[17179569.184000] BIOS-e820: 0000000007f50000 - 0000000008000000 (ACPI NVS)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 127MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 32576
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 28480 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f6cb0
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x05000222 MSFT 0x00000097) @ 0x07f40000
[17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x05000222 MSFT 0x00000097) @ 0x07f40200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x05000222 MSFT 0x00000097) @ 0x07f40300
[17179569.184000] ACPI: DSDT (v001 DELL DIM 4500 0x0000010a MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 10000000 (gap: 08000000:f8000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda3 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 512 (order: 9, 2048 bytes)
[17179569.184000] Detected 1794.407 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.188000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[17179570.188000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[17179570.192000] Memory: 119532k/130304k available (1911k kernel code, 10240k reserved, 1073k data, 308k init, 0k highmem)
[17179570.192000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.272000] Calibrating delay using timer specific routine.. 3593.37 BogoMIPS (lpj=7186742)
[17179570.272000] Security Framework v1.0.0 initialized
[17179570.272000] SELinux: Disabled at boot.
[17179570.272000] Mount-cache hash table entries: 512
[17179570.272000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179570.272000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179570.272000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179570.272000] CPU: L2 cache: 512K
[17179570.272000] CPU: Hyper-Threading is disabled
[17179570.272000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
[17179570.272000] Checking 'hlt' instruction... OK.
[17179570.288000] SMP alternatives: switching to UP code
[17179570.288000] Freeing SMP alternatives: 16k freed
[17179570.288000] checking if image is initramfs... it is
[17179571.024000] Freeing initrd memory: 5326k freed
[17179571.024000] ACPI: Core revision 20060707
[17179571.024000] ACPI: Looking for DSDT ... not found!
[17179571.024000] CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04
[17179571.024000] Total of 1 processors activated (3593.37 BogoMIPS).
[17179571.024000] ENABLING IO-APIC IRQs
[17179571.028000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.168000] Brought up 1 CPUs
[17179571.168000] migration_cost=0
[17179571.168000] NET: Registered protocol family 16
[17179571.168000] EISA bus registered
[17179571.168000] ACPI: bus type pci registered
[17179571.168000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[17179571.168000] PCI: Using configuration type 1
[17179571.168000] Setting up standard PCI resources
[17179571.184000] ACPI: Interpreter enabled
[17179571.184000] ACPI: Using IOAPIC for interrupt routing
[17179571.188000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.188000] PCI: Probing PCI hardware (bus 00)
[17179571.188000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[17179571.188000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[17179571.188000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179571.188000] Boot video device is 0000:01:00.0
[17179571.192000] PCI: Transparent bridge - 0000:00:1e.0
[17179571.192000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.192000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179571.196000] ACPI: Power Resource [URP1] (off)
[17179571.196000] ACPI: Power Resource [FDDP] (off)
[17179571.196000] ACPI: Power Resource [LPTP] (off)
[17179571.200000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179571.200000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[17179571.200000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[17179571.200000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179571.204000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179571.204000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179571.204000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179571.204000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[17179571.204000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.204000] pnp: PnP ACPI init
[17179571.208000] pnp: PnP ACPI: found 14 devices
[17179571.208000] PnPBIOS: Disabled by ACPI PNP
[17179571.208000] PCI: Using ACPI for IRQ routing
[17179571.208000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.216000] pnp: 00:0c: ioport range 0x400-0x47f could not be reserved
[17179571.216000] pnp: 00:0c: ioport range 0x680-0x6ff has been reserved
[17179571.216000] pnp: 00:0c: ioport range 0x480-0x4bf has been reserved
[17179571.216000] PCI: Bridge: 0000:00:01.0
[17179571.216000] IO window: disabled.
[17179571.216000] MEM window: fc900000-fe9fffff
[17179571.216000] PREFETCH window: ec500000-f46fffff
[17179571.216000] PCI: Bridge: 0000:00:1e.0
[17179571.216000] IO window: d000-dfff
[17179571.216000] MEM window: fea00000-feafffff
[17179571.216000] PREFETCH window: f4700000-f47fffff
[17179571.216000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179571.220000] NET: Registered protocol family 2
[17179571.256000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[17179571.256000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[17179571.256000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[17179571.256000] TCP: Hash tables configured (established 4096 bind 2048)
[17179571.256000] TCP reno registered
[17179571.256000] * This chipset may have PM-Timer Bug. Due to workarounds for a bug,
[17179571.256000] * this time source is slow. If you are sure your timer does not have
[17179571.256000] * this bug, please use "pmtmr_good" to disable the workaround
[17179571.256000] audit: initializing netlink socket (disabled)
[17179571.256000] audit(1180286647.256:1): initialized
[17179571.256000] VFS: Disk quotas dquot_6.5.1
[17179571.256000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.256000] Initializing Cryptographic API
[17179571.256000] io scheduler noop registered
[17179571.256000] io scheduler anticipatory registered
[17179571.256000] io scheduler deadline registered
[17179571.256000] io scheduler cfq registered (default)
[17179571.256000] isapnp: Scanning for PnP cards...
[17179571.612000] isapnp: No Plug & Play device found
[17179571.648000] Real Time Clock Driver v1.12ac
[17179571.648000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.648000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.648000] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.648000] mice: PS/2 mouse device common for all mice
[17179571.648000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.648000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.648000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.648000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179571.652000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.652000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.652000] EISA: Probing bus 0 at eisa.0
[17179571.652000] EISA: Detected 0 cards.
[17179571.652000] TCP bic registered
[17179571.652000] NET: Registered protocol family 1
[17179571.652000] NET: Registered protocol family 8
[17179571.652000] NET: Registered protocol family 20
[17179571.652000] Using IPI No-Shortcut mode
[17179571.652000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.652000] Freeing unused kernel memory: 308k freed
[17179571.684000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.816000] Capability LSM initialized
[17179572.872000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179573.536000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[17179573.536000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[17179573.536000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
[17179573.536000] ICH4: chipset revision 1
[17179573.536000] ICH4: not 100% native mode: will probe irqs later
[17179573.536000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[17179573.536000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[17179573.536000] Probing IDE interface ide0...
[17179573.828000] hda: WDC WD1200JB-75CRA0, ATA DISK drive
[17179574.504000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.528000] Probing IDE interface ide1...
[17179575.268000] hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive
[17179576.056000] hdd: ATAPI DVD+RW 4X4X12, ATAPI CD/DVD-ROM drive
[17179576.116000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.128000] hda: max request size: 128KiB
[17179576.148000] hda: Host Protected Area detected.
[17179576.148000] current capacity is 234375000 sectors (120000 MB)
[17179576.148000] native capacity is 234441648 sectors (120034 MB)
[17179576.148000] hda: Host Protected Area disabled.
[17179576.148000] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[17179576.148000] hda: cache flushes not supported
[17179576.148000] hda: hda1 hda2 hda3 hda4
[17179576.216000] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179576.216000] Uniform CD-ROM driver Revision: 3.20
[17179576.288000] hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
[17179576.540000] usbcore: registered new driver usbfs
[17179576.540000] usbcore: registered new driver hub
[17179576.540000] USB Universal Host Controller Interface driver v3.0
[17179576.540000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179576.540000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179576.540000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179576.540000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179576.540000] uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000e800
[17179576.540000] usb usb1: configuration #1 chosen from 1 choice
[17179576.540000] hub 1-0:1.0: USB hub found
[17179576.540000] hub 1-0:1.0: 2 ports detected
[17179576.620000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179576.648000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
[17179576.648000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179576.648000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179576.648000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179576.648000] uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000e880
[17179576.648000] usb usb2: configuration #1 chosen from 1 choice
[17179576.648000] hub 2-0:1.0: USB hub found
[17179576.648000] hub 2-0:1.0: 2 ports detected
[17179576.756000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
[17179576.756000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179576.756000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179576.756000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179576.756000] uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000ec00
[17179576.756000] usb usb3: configuration #1 chosen from 1 choice
[17179576.756000] hub 3-0:1.0: USB hub found
[17179576.756000] hub 3-0:1.0: 2 ports detected
[17179576.888000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
[17179576.888000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179576.888000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179576.888000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[17179576.888000] ehci_hcd 0000:00:1d.7: debug port 1
[17179576.888000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179576.892000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfebffc00
[17179576.892000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.896000] usb usb4: configuration #1 chosen from 1 choice
[17179576.896000] hub 4-0:1.0: USB hub found
[17179576.896000] hub 4-0:1.0: 6 ports detected
[17179577.004000] ACPI: PCI Interrupt 0000:02:02.2[C] -> GSI 17 (level, low) -> IRQ 201
[17179577.004000] ehci_hcd 0000:02:02.2: EHCI Host Controller
[17179577.004000] ehci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 5
[17179577.028000] ehci_hcd 0000:02:02.2: irq 201, io mem 0xfeafbc00
[17179577.028000] ehci_hcd 0000:02:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.032000] usb usb5: configuration #1 chosen from 1 choice
[17179577.032000] hub 5-0:1.0: USB hub found
[17179577.032000] hub 5-0:1.0: 5 ports detected
[17179577.168000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 169
[17179577.168000] ohci_hcd 0000:02:02.0: OHCI Host Controller
[17179577.168000] ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 6
[17179577.168000] ohci_hcd 0000:02:02.0: irq 169, io mem 0xfeaf9000
[17179577.256000] usb usb6: configuration #1 chosen from 1 choice
[17179577.256000] hub 6-0:1.0: USB hub found
[17179577.256000] hub 6-0:1.0: 3 ports detected
[17179577.364000] ACPI: PCI Interrupt 0000:02:02.1[B] -> GSI 19 (level, low) -> IRQ 185
[17179577.364000] ohci_hcd 0000:02:02.1: OHCI Host Controller
[17179577.364000] ohci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 7
[17179577.364000] ohci_hcd 0000:02:02.1: irq 185, io mem 0xfeafa000
[17179577.452000] usb usb7: configuration #1 chosen from 1 choice
[17179577.452000] hub 7-0:1.0: USB hub found
[17179577.452000] hub 7-0:1.0: 2 ports detected
[17179577.636000] Attempting manual resume
[17179577.652000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179577.652000] EXT3-fs: write access will be enabled during recovery.
[17179582.972000] kjournald starting. Commit interval 5 seconds
[17179582.972000] EXT3-fs: recovery complete.
[17179582.972000] EXT3-fs: mounted filesystem with ordered data mode.
[17179595.264000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179595.268000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179595.996000] hw_random hardware driver 1.0.0 loaded
[17179596.008000] Floppy drive(s): fd0 is 1.44M
[17179596.036000] FDC 0 is a post-1991 82077
[17179596.040000] parport: PnPBIOS parport detected.
[17179596.040000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[17179596.108000] input: PC Speaker as /class/input/input1
[17179596.504000] Linux agpgart interface v0.101 (c) Dave Jones
[17179596.508000] agpgart: Detected an Intel i845 Chipset.
[17179596.512000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179597.028000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
[17179597.028000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179597.052000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179597.348000] intel8x0_measure_ac97_clock: measured 58014 usecs
[17179597.348000] intel8x0: clocking to 48000
[17179597.352000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 209
[17179597.352000] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
[17179597.460000] natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
[17179597.460000] originally by Donald Becker <becker@scyld.com>
[17179597.460000] http://www.scyld.com/network/natsemi.html
[17179597.460000] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[17179597.460000] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 17 (level, low) -> IRQ 201
[17179597.464000] natsemi eth0: NatSemi DP8381[56] at 0xfeaf8000 (0000:02:0c.0), 00:09:5b:20:d2:0e, IRQ 201, port TP.
[17179597.696000] ts: Compaq touchscreen protocol output
[17179598.404000] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
[17179598.404000] rt2500 EEPROM: 6 6 6 6 6 5 5 5 5 5 5 5 5 5 dBm Maximum
[17179598.536000] lp0: using parport0 (interrupt-driven).
[17179598.716000] Adding 3124632k swap on /dev/disk/by-uuid/e385e4dc-d037-4e65-a1e3-4ca5772801e4. Priority:-1 extents:1 across:3124632k
[17179599.732000] NET: Registered protocol family 17
[17179697.916000] EXT3 FS on hda3, internal journal
[17179698.400000] kjournald starting. Commit interval 5 seconds
[17179698.412000] EXT3 FS on hda2, internal journal
[17179698.412000] EXT3-fs: mounted filesystem with ordered data mode.
[17179702.576000] ndiswrapper version 1.44 loaded (smp=yes)
[17179702.652000] ndiswrapper: driver wn311b (NETGEAR,10/12/2006, 4.100.15.5) loaded
[17179702.652000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 217
[17179702.652000] PCI: Setting latency timer of device 0000:02:01.0 to 64
[17179702.656000] ndiswrapper (NdisWriteErrorLogEntry:197): log: C000138D, count: 1, return_address: c8c74937
[17179702.656000] ndiswrapper (NdisWriteErrorLogEntry:200): code: 0x10b
[17179702.656000] ndiswrapper (miniport_init:277): couldn't initialize device: C0000001
[17179702.656000] ndiswrapper (pnp_start_device:440): Windows driver couldn't initialize the device (C0000001)
[17179702.656000] ndiswrapper (miniport_halt:352): device c7add400 is not initialized - not halting
[17179702.656000] ndiswrapper: device eth%d removed
[17179702.656000] ACPI: PCI interrupt for device 0000:02:01.0 disabled
[17179702.656000] ndiswrapper: probe of 0000:02:01.0 failed with error -22
[17179702.656000] usbcore: registered new driver ndiswrapper
[17179712.556000] NET: Registered protocol family 10
[17179712.556000] lo: Disabled Privacy Extensions
[17179712.556000] IPv6 over IPv4 tunneling driver
[17179722.776000] ra0: no IPv6 routers present
[17180721.672000] usbcore: deregistering driver ndiswrapper
[17180721.676000] ndiswrapper (ntoskernel_exit:2674): object c34fa1e0 type 2 was not freed, freeing it now
[17180727.980000] ndiswrapper version 1.44 loaded (smp=yes)
[17180728.068000] ndiswrapper: driver wn311b (NETGEAR,10/12/2006, 4.100.15.5) loaded
[17180728.068000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 217
[17180728.068000] PCI: Setting latency timer of device 0000:02:01.0 to 64
[17180728.072000] ndiswrapper (NdisWriteErrorLogEntry:197): log: C000138D, count: 1, return_address: c8c74937
[17180728.072000] ndiswrapper (NdisWriteErrorLogEntry:200): code: 0x10b
[17180728.072000] ndiswrapper (miniport_init:277): couldn't initialize device: C0000001
[17180728.072000] ndiswrapper (pnp_start_device:440): Windows driver couldn't initialize the device (C0000001)
[17180728.076000] ndiswrapper (miniport_halt:352): device c6962400 is not initialized - not halting
[17180728.076000] ndiswrapper: device eth%d removed
[17180728.076000] ACPI: PCI interrupt for device 0000:02:01.0 disabled
[17180728.076000] ndiswrapper: probe of 0000:02:01.0 failed with error -22
[17180728.076000] usbcore: registered new driver ndiswrapper