Problem: Asterisk on a Mini-itx board working fine. Plugged in USB drive, then X100p and soundcard died. 2 other x100p's died. Put * on a new box, ordered 3 new x100p cards. On the new box I get: ZT_CHANCONFIG failed on channel 1 for 2 new cards. On the old box I get: FXO PCI Master abort, with the remaining new card. Same error as before.
I think the mini-itx is frying the cards.
zaptel.conf:
loadzone = us
defaultzone=us
fxsks=1
zapata.conf:
cat zapata.conf
[channels]
signalling=fxs_ks
context=incoming
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=1.5
txgain=1.5
immediate=no
busydetect=no
callprogress=no
musiconhold=default
usecallerid=yes
;callerid=asreceived
cidsignalling=bell
;cidstart=ring
callwaitingcallerid=yes
callwaiting=yes
threewaycalling=yes
hidecallerid=yes
channel => 1
I run:
modprobe zaptel
modprobe wcfxo
ztcfg -vv
cat /proc/interrupts*
CPU0
0: 3579066 XT-PIC timer
1: 9097 XT-PIC i8042
2: 0 XT-PIC cascade
7: 0 XT-PIC parport0
9: 9533 XT-PIC acpi, Intel ICH 82801AA, eth0
11: 0 XT-PIC uhci_hcd
12: 62963 XT-PIC i8042
14: 5824 XT-PIC ide0
15: 11 XT-PIC ide1
NMI: 0
LOC: 3579048
ERR: 0
MIS: 0