Uncompressing Linux...
Done. Now booting the kernel.
Linux version 2.6.19.2 (root@bertha) (gcc version 4.1.2) #9 Tue May 22 227Setting up paging and the MMU.
Linux/CRIS port on ETRAX 100LX (c) 2001 Axis Communications AB
Built 1 zonelists. Total pages: 4080
Kernel command line: root=/dev/mtdblock2 rw init=/etc/preinit
PID hash table entries: 128 (order: 7, 512 bytes)
ds1302: RTC not found.
Dentry cache hash table entries: 4096 (order: 1, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 0, 8192 bytes)
Memory: 30000k/32768k available (1387k kernel code, 2768k reserved, 435k data, 64k init)
Mount-cache hash table entries: 1024
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -3, 1024 bytes)
TCP established hash table entries: 1024 (order: -1, 4096 bytes)
TCP bind hash table entries: 512 (order: -2, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
Linux version 2.6.19.2 (root@bertha) (gcc version 4.1.2) #9 Tue May 22 22:42:09 CEST 2007
Setting up paging and the MMU.
Linux/CRIS port on ETRAX 100LX (c) 2001 Axis Communications AB
Built 1 zonelists. Total pages: 4080
Kernel command line: root=/dev/mtdblock2 rw init=/etc/preinit
PID hash table entries: 128 (order: 7, 512 bytes)
ds1302: RTC not found.
Dentry cache hash table entries: 4096 (order: 1, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 0, 8192 bytes)
Memory: 30000k/32768k available (1387k kernel code, 2768k reserved, 435k data, 64k init)
Mount-cache hash table entries: 1024
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -3, 1024 bytes)
TCP established hash table entries: 1024 (order: -1, 4096 bytes)
TCP bind hash table entries: 512 (order: -2, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
fast_timer_init()
squashfs: version 3.0 (2006/03/15) Phillip Lougher
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
JFFS2: default compression mode: priority
io scheduler noop registered (default)
ETRAX 100LX serial-driver 1.25 $, (c) 2000-2004 Axis Communications AB
ttyS0 at 0xb0000060 is a builtin UART with DMA
ttyS2 at 0xb0000070 is a builtin UART with DMA
ttyS3 at 0xb0000078 is a builtin UART with DMA
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
ETRAX 100LX 10/100MBit ethernet v2.0 (c) 1998-2006 Axis Communications AB
eth0: changed MAC to 00:40:8C:CD:00:00
ETRAX 100LX USB Host Controller version 1.00 (c) 2005, 2006 Axis Communications AB
usb_devdrv: Etrax 100LX USB Revision 16 v1,2
usb_devdrv: Bulk timer interval, start:2 eot:6
usb_devdrv: Claimed interface for USB physical port 1
usb_devdrv: Claimed interface for USB physical port 2
crisv10_irq dbg: ctr_status_irq, controller status: host_mode
hc-crisv10 hc-crisv10.0: ETRAX 100LX USB Host Controller
hc-crisv10 hc-crisv10.0: new USB bus registered, assigned bus number 1
hc-crisv10 hc-crisv10.0: reset
hc-crisv10 hc-crisv10.0: start
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new interface driver rtl8150
cse0: Probing a 0x04000000 bytes large window at 0xe0000000.
cse0: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
cse0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cse1: Probing a 0x04000000 bytes large window at 0xe4000000.
cse0: 0x00800000 bytes of flash memory.
Using default partition table.
Creating 3 MTD partitions on "cse0":
0x00000000-0x00200000 : "kernel"
0x00200000-0x00400000 : "filesystem"
0x00400000-0x00800000 : "rootfs"
0x004d0000-0x00800000 : "rootfs_data"
Adding RAM partition for romfs image:
/dev/flash1 at 0x00000000, size 0x00000000
I2C driver v2.2, (c) 1999-2004 Axis Communications AB
gpio init
GPIO port G: in_bits: 0x01FFFF3F out_bits: 0x3200003E val: F1FFFFFF
GPIO port G: dir: 00000000 changeable: 01FFFF01
ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002, 2003, 2004 Axis Communications AB
ds1302: RTC not found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 64k freed
/sbin/mount_root: /sbin/mount_root: 21: cannot create /dev/null: Read-only file system
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
Unlocking rootfs_data ...
switching to jffs2
mount: mounting /dev/mtdblock3 on /jffs failed
jffs2 not ready yet; using ramdisk
creating directories... done
setting up symlinks... done
init started: BusyBox v1.4.2 (2007-05-22 21:58:08 CEST) multi-call binary
: Syntax: /etc/rc.d/K40network [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/K99umount [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/S10boot [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/S39usb [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/S40network [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/S50cron [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/S50dropbear [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/S50httpd [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/S50telnet [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/S60dnsmasq [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/S95done [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart
: Syntax: /etc/rc.d/S99sysctl [command]
: Available commands:
: start Start the service
: stop Stop the service
: restart Restart the service
: reload Reload configuration files (or restart if that fails)
: enable Enable service autostart
: disable Disable service autostart