rendered paste bodyInspecting /boot/System.map-2.6.18.8-0.3-default
Loaded 23388 symbols from /boot/System.map-2.6.18.8-0.3-default.
Symbols match kernel version 2.6.18.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.18.8-0.3-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Tue Apr 17 08:42:35 UTC 2007
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
<4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003bee0000 (usable)
<4> BIOS-e820: 000000003bee0000 - 000000003bee3000 (ACPI NVS)
<4> BIOS-e820: 000000003bee3000 - 000000003bef0000 (ACPI data)
<4> BIOS-e820: 000000003bef0000 - 000000003bf00000 (reserved)
<4> BIOS-e820: 000000003c000000 - 0000000040000000 (reserved)
<4> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<5>62MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000f3a00
<7>On node 0 totalpages: 245472
<7> DMA zone: 4096 pages, LIFO batch:0
<7> Normal zone: 225280 pages, LIFO batch:31
<7> HighMem zone: 16096 pages, LIFO batch:3
<6>DMI 2.2 present.
<6>Using APIC driver default
<6>IO/L-APIC allowed because system is MP or new enough
<7>ACPI: RSDP (v000 Nvidia ) @ 0x000f7a10
<7>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee3040
<7>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee30c0
<7>ACPI: _HPT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000098) @ 0x3bee9600
<7>ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee9680
<7>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee9540
<7>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>If you got timer trouble try acpi_use_timer_override
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>If you got timer trouble try acpi_use_timer_override
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>If you got timer trouble try acpi_use_timer_override
<6>ACPI: PM-Timer IO Port: 0x1008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 15:15 APIC version 16
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ9 used by override.
<7>ACPI: IRQ14 used by override.
<7>ACPI: IRQ15 used by override.
<4>Enabling APIC mode: Flat. Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
<4>Detected 1607.399 MHz processor.
<4>Built 1 zonelists. Total pages: 245472
<5>Kernel command line: root=/dev/hda7 vga=0x31a resume=/dev/hda3 splash=silent
<6>bootsplash: silent mode.
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 966248k/981888k available (1697k kernel code, 15068k reserved, 972k data, 196k init, 64384k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 3218.34 BogoMIPS (lpj=6436690)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 00000019
<7>CPU: After vendor identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 00000019
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 00000019
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 16k freed
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 3258k freed
<6>ACPI: Core revision 20060707
<4>CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
<6>Total of 1 processors activated (3218.34 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
<6>Brought up 1 CPUs
<4>migration_cost=0
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: Using MMCONFIG
<5>PCI: No mmconfig possible on 0:18
<4>Setting up standard PCI resources
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<7>Boot video device is 0000:00:0d.0
<6>PCI: Transparent bridge - 0000:00:04.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15)
<4>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
<4>ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
<4>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
<4>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
<4>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
<4>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
<4>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
<4>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
<4>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
<4>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
<4>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
<4>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
<4>ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
<4>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 13 devices
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<6>pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
<6>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
<6>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
<6>pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
<6>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
<6>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
<6>PCI: Bridge: 0000:00:04.0
<6> IO window: c000-cfff
<6> MEM window: fdf00000-fdffffff
<6> PREFETCH window: fda00000-fdafffff
<6>PCI: Bridge: 0000:00:0b.0
<6> IO window: b000-bfff
<6> MEM window: fde00000-fdefffff
<6> PREFETCH window: fdd00000-fddfffff
<6>PCI: Bridge: 0000:00:0c.0
<6> IO window: a000-afff
<6> MEM window: fdc00000-fdcfffff
<6> PREFETCH window: fdb00000-fdbfffff
<7>PCI: Setting latency timer of device 0000:00:04.0 to 64
<7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
<7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>Machine check exception polling timer started.
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<5>audit(1179778332.828:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
<4>pcie_portdrv_probe->Dev[03e9:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:0b.0:pcie00]
<7>Allocate Port Service[0000:00:0b.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
<4>pcie_portdrv_probe->Dev[03e9:10de] has invalid IRQ. Check vendor BIOS
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:0c.0:pcie00]
<7>Allocate Port Service[0000:00:0c.0:pcie03]
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 10240k, total 65536k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:d2a0
<6>vesafb: pmi: set display start = c00cd2d6, set palette = c00cd340
<6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3).
<4>Console: switching to colour frame buffer device 156x60
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>PNP: PS/2 controller doesn't have AUX irq; using default 12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /class/input/input0
<6>input: AT Translated Set 2 keyboard as /class/input/input1
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>Freeing unused kernel memory: 196k freed
<6>Time: tsc clocksource has been installed.
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
<3>ACPI: Getting cpuindex for acpiid 0x1
<6>ACPI: Thermal Zone [THRM] (40 C)
<6>NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
<6>NFORCE-MCP61: chipset revision 162
<6>NFORCE-MCP61: not 100% native mode: will probe irqs later
<6>NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
<7>Probing IDE interface ide0...
<4>hda: WDC WD400BB-00JHC0, ATA DISK drive
<4>hdb: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 128KiB
<6>hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
<6>hda: cache flushes supported
<6> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
<7>libata version 2.00 loaded.
<7>sata_nv 0000:00:08.0: version 2.0
<4>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
<6>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 201
<7>PCI: Setting latency timer of device 0000:00:08.0 to 64
<6>ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 201
<6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 201
<6>scsi0 : sata_nv
<6>ata1: SATA link down (SStatus 0 SControl 300)
<4>ATA: abnormal status 0x7F on port 0x9F7
<6>scsi1 : sata_nv
<6>ata2: SATA link down (SStatus 0 SControl 300)
<4>ATA: abnormal status 0x7F on port 0x977
<6>ACPI: Fan [FAN] (on)
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<4>Attempting manual resume
<5>ReiserFS: hda7: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda7: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda7: checking transaction log (hda7)
<5>ReiserFS: hda7: Using r5 hash to sort names
<6>parport: PnPBIOS parport detected.
<6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
<6>lp0: using parport0 (interrupt-driven).
<6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
<4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
<6>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 209
<7>PCI: Setting latency timer of device 0000:00:07.0 to 64
<6>forcedeth: using HIGHDMA
<3>0000:00:07.0: Invalid Mac address detected: 03:80:80:80:4b:04
<3>Please complain to your hardware vendor. Switching to a random MAC.
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>eth0: forcedeth.c: subsystem: 01019:2604 bound to 0000:00:07.0
<4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
<6>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 217
<7>PCI: Setting latency timer of device 0000:00:02.0 to 64
<6>ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
<6>ohci_hcd 0000:00:02.0: irq 217, io mem 0xfe02f000
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: OHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.18.8-0.3-default ohci_hcd
<6>usb usb1: SerialNumber: 0000:00:02.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 8 ports detected
<4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
<6>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 225
<7>PCI: Setting latency timer of device 0000:00:02.1 to 64
<6>ehci_hcd 0000:00:02.1: EHCI Host Controller
<6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
<6>ehci_hcd 0000:00:02.1: debug port 1
<7>PCI: cache line size of 64 is not supported by device 0000:00:02.1
<6>ehci_hcd 0000:00:02.1: irq 225, io mem 0xfe02e000
<6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: EHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.18.8-0.3-default ehci_hcd
<6>usb usb2: SerialNumber: 0000:00:02.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 8 ports detected
<4>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
<6>ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 201
<7>PCI: Setting latency timer of device 0000:00:05.0 to 64
<6>ohci_hcd 0000:00:02.0: wakeup
<4>nvidia: module license 'NVIDIA' taints kernel.
<4>ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22
<6>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [AIGP] -> GSI 22 (level, low) -> IRQ 209
<7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
<4>NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
<6>hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
<6>Uniform CD-ROM driver Revision: 3.20
<6>usb 1-6: new low speed USB device using ohci_hcd and address 2
<6>usb 1-6: new device found, idVendor=062a, idProduct=0001
<6>usb 1-6: new device strings: Mfr=0, Product=0, SerialNumber=0
<6>usb 1-6: configuration #1 chosen from 1 choice
<6>usbcore: registered new driver hiddev
<6>input: HID 062a:0001 as /class/input/input2
<6>input: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:02.0-6
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<6>Adding 506040k swap on /dev/hda3. Priority:-1 extents:1 across:506040k
<6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
<6>loop: loaded (max 8 devices)
<5>ReiserFS: hda8: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda8: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda8: checking transaction log (hda8)
<5>ReiserFS: hda8: Using r5 hash to sort names
<5>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda2: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda2: checking transaction log (hda2)
<5>ReiserFS: hda2: Using r5 hash to sort names
<6>NTFS driver 2.1.27 [Flags: R/W MODULE].
<6>NTFS volume version 3.1.
<6>AppArmor: AppArmor initialized
<5>audit(1179778352.509:2): AppArmor initialized
<4>
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Mon May 21 20:12:13 2007
Trying manual resume from /dev/hda3
Creating device nodes with udev
Loading ide-core
Loading ide-disk
Loading scsi_mod
Loading sd_mod
Loading processor
Loading thermal
Loading amd74xx
Loading libata
Loading sata_nv
Loading fan
Loading edd
Loading reiserfs
Invoking userspace resume from /dev/hda3
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.3
resume: Could not read the image
Invoking in-kernel resume from /dev/hda3
Waiting for device /dev/hda7 to appear: ok
fsck 1.39 (29-May-2006)
[/bin/fsck.reiserfs (1) -- /] fsck.reiserfs -a /dev/hda7
Reiserfs super block in block 16 on 0x307 of format 3.6 with standard journal
Blocks (total/free): 2042240/1259276 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hda7' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
fsck succeeded. Mounting root device read-write.
Mounting root /dev/hda7
Boot logging started on /dev/tty1(/dev/console (deleted)) at Mon May 21 17:12:21 2007
<notice>boot.udev start
Starting udevd done
<notice>'boot.udev start' exits with status 0
<notice>boot.rootfsck start
Activating swap-devices in /etc/fstab...
done<notice>'boot.rootfsck start' exits with status 0
<notice>boot.loadmodules start
Loading required kernel modules
done<notice>'boot.loadmodules start' exits with status 0
<notice>boot.preload_early start
done
<notice>'boot.preload_early start' exits with status 0
<notice>boot.device-mapper start
Activating device mapper...
done
<notice>'boot.device-mapper start' exits with status 0
<notice>boot.md start
Starting MD Raid done
<notice>'boot.md start' exits with status 0
<notice>boot.lvm start
Waiting for udev to settle...
Scanning for LVM volume groups...
Reading all physical volumes. This may take a while...
No volume groups found
No volume groups found
Activating LVM volume groups...
No volume groups found
done
<notice>'boot.lvm start' exits with status 0
<notice>boot.localfs start
Checking file systems...
fsck 1.39 (29-May-2006)
Reiserfs super block in block 16 on 0x308 of format 3.6 with standard journal
Blocks (total/free): 518080/420799 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hda8' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x302 of format 3.6 with standard journal
Blocks (total/free): 676736/164677 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hda2' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda5 on /extendida type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
/dev/hda8 on /home type reiserfs (rw)
/dev/hda2 on /kurumin type reiserfs (rw)
/dev/hda1 on /win98 type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
/dev/hda6 on /winxp type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
done<notice>'boot.localfs start' exits with status 0
<notice>boot.apparmor start
Loading AppArmor module done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
<notice>'boot.apparmor start' exits with status 0
<notice>boot.cleanup start
<notice>'boot.cleanup start' exits with status 0
<notice>boot.clock start
Setting up the hardware clockdone
<notice>'boot.clock start' exits with status 0
<notice>boot.klog start
Creating /var/log/boot.msg
done<notice>killproc: kill(918,29)
<notice>'boot.klog start' exits with status 0
<notice>boot.proc start
<notice>'boot.proc start' exits with status 0
<notice>boot.scpm start
<notice>'boot.scpm start' exits with status 0
<notice>boot.sysctl start
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
<notice>'boot.sysctl start' exits with status 0
<notice>boot.udev_retry start
<notice>'boot.udev_retry start' exits with status 0
<notice>boot.videobios start
<notice>'boot.videobios start' exits with status 0
<notice>boot.crypto start
<notice>'boot.crypto start' exits with status 0
<notice>boot.ipconfig start
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
<notice>'boot.ipconfig start' exits with status 0
<notice>boot.localnet start
Setting up hostname 'nenhum-pc'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>'boot.localnet start' exits with status 0
<notice>boot.preload start
done
<notice>'boot.preload start' exits with status 0
<notice>boot.swap start
Activating remaining swap-devices in /etc/fstab...
done<notice>'boot.swap start' exits with status 0
<notice>SuSEfirewall2_init start
Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
<notice>'SuSEfirewall2_init start' exits with status 0
<notice>boot.ldconfig start
<notice>'boot.ldconfig start' exits with status 0
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(918,3)
Boot logging started on /dev/tty1(/dev/console) at Mon May 21 20:12:42 2007
Master Resource Control: previous runlevel: N, switching to runlevel: 5
Loading AppArmor profiles - AppArmor already loaded with profiles.skipped
done
INIT: Entering runlevel: 5
<notice> CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/acpid ]
[acpid]: starting up
[acpid]: 0 rules loaded
acpid: loading ACPI modules ( ac battery button ) done
acpid: will not skip unsupported modules
acpid: loading ACPI laptop modules ( ) done
Starting acpid done
startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
Starting D-Bus daemondone
Initializing random number generatordone
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/klogd ]
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting syslog servicesdone
Starting irqbalance unused
Starting resource managerdone
<notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ]
Starting PolicyKit daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
Loading CPUFreq modulesLoading keymap i386/qwerty/br-abnt2.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
done (CPUFreq not supported)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: nVidia Corporation MCP61 Ethernet (rev a2)
No configuration found for eth0
unusedSetting up service network . . . . . . . . . . . . . . . .done
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting auditd done
Checking/updating CPU microcode unused
Starting nfsboot (sm-notify) done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
Starting ZENworks Management Daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
Starting powersaved: done
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=pt_BR.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
Starting service kdmdone
Starting cupsddone
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
SuSEfirewall2: Warning: no interface active
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: irq_balancer nfs microcode
<notice>killproc: kill(2372,3)
c9518a90:/etc/sysconfig/network # ifconfig
eth0 Encapsulamento do Link: Ethernet Endereço de HW 00:00:6C:C2:79:7B
inet end.: 201.81.138.144 Bcast:255.255.255.255 Masc:255.255.240.0
UP BROADCASTRUNNING MULTICAST MTU:1500 Métrica:1
RX packets:775557 errors:0 dropped:0 overruns:0 frame:0
TX packets:54027 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:155360727 (148.1 Mb) TX bytes:5307361 (5.0 Mb)
IRQ:209 Endereço de E/S:0x2000
lo Encapsulamento do Link: Loopback Local
inet end.: 127.0.0.1 Masc:255.0.0.0
UP LOOPBACKRUNNING MTU:16436 Métrica:1
RX packets:102 errors:0 dropped:0 overruns:0 frame:0
TX packets:102 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7444 (7.2 Kb) TX bytes:7444 (7.2 Kb)