Someone

ubuntu@ubuntu:~/qemu/trunk/mipsel-softmmu$ qemu-system-mipsel -M fbox-8mb -kernel ~/kamikaze_ar7/build_mipsel/linux-2.6-ar7/vmlinux
Could not configure '/dev/rtc' to have a 1024 Hz timer. This is not a fatal
error, but for better emulation accuracy either use a 2.6 host Linux kernel or
type 'echo 1024 > /proc/sys/dev/rtc/max-user-freq' as root.
mips_ar7_common_init: setting endianness 0
mips_ar7_common_init: ram_base = 0xae067000, ram_size = 0x02000000
mips_ar7_common_init: load BIOS '/usr/local/share/qemu/flashimage.bin', size -1
mips_ar7_common_init: load BIOS '/usr/local/share/qemu/mips_bios.bin', size 4096
qemu: elf kernel '/home/ubuntu/kamikaze_ar7/build_mipsel/linux-2.6-ar7/vmlinux' with size 0x00289085
/home/ubuntu/qemu/hw/serial_16450.c:449
/home/ubuntu/qemu/hw/serial_16450.c:449
ACX111  vlynq_tnetw1130_init    
ACX111  vlynq_tnetw1130_init    io_memory = 0x00000070, 0x00000080
ACX111  tnetw1130_mem_map       region 1, addr 0x04000000, size 0x00040000
ACX111  tnetw1130_mem_map       region 0, addr 0x04040000, size 0x00022000
AR7     ar7_display_event       (nil), 2
Unassigned mem read  0x16000000 [][]
qemu: fatal: Trying to execute code outside RAM or ROM at 0x96000000

pc=0x96000000 HI=0x00000000 LO=0x00000000 ds 0002 00000000 0
GPR00: r0 00000000 at 00000000 v0 00000000 v1 00000000
GPR04: a0 00000000 a1 94700000 a2 94700000 a3 00000000
GPR08: t0 00000000 t1 00000000 t2 00000000 t3 00000000
GPR12: t4 00000000 t5 00000000 t6 00000000 t7 00000000
GPR16: s0 00000000 s1 00000000 s2 00000000 s3 00000000
GPR20: s4 00000000 s5 00000000 s6 00000000 s7 00000000
GPR24: t8 00000000 t9 00000000 k0 00000000 k1 00000000
GPR28: gp 00000000 sp 95fff000 s8 00000000 ra 00000000
CP0 Status  0x00400004 Cause   0x00000000 EPC    0x00000000
    Config0 0x80240082 Config1 0x9e9b4d8a LLAddr 0x00000000
Aborted (core dumped)

.
.
.
.
ubuntu@ubuntu:~/qemu/trunk/mipsel-softmmu$ ./qemu-system-mipsel -M fbox-8mb -kernel ~/kamikaze_ar7/build_mipsel/linux-2.6-ar7/vmlinux
Could not configure '/dev/rtc' to have a 1024 Hz timer. This is not a fatal
error, but for better emulation accuracy either use a 2.6 host Linux kernel or
type 'echo 1024 > /proc/sys/dev/rtc/max-user-freq' as root.
mips_ar7_common_init: ram_base = 0xadf8c000, ram_size = 0x02000000
ram_offset (internal RAM) = 2000000
mips_ar7_common_init: load BIOS '/usr/local/share/qemu/flashimage.bin', size -1
mips_ar7_common_init: load BIOS '/usr/local/share/qemu/mips_bios.bin', size 4096
qemu: elf kernel '/home/ubuntu/kamikaze_ar7/build_mipsel/linux-2.6-ar7/vmlinux' with start address 0x94000000 and size 2658437 bytes
qemu: could not load kernel parameters ''
ubuntu@ubuntu:~/qemu/trunk/mipsel-softmmu$