ADAM2 Revision 0.18.01
(C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
(C) Copyright 2003 Telogy Networks, Inc.
Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz]
Memory optimization Complete!
DGB34 >
Press any key to abort OS load, or wait 3 seconds for OS to boot...
checksum error
LINUX running...
Linux version 2.6.19.2 (mjw99@mjw) (gcc version 4.1.2) #1 Mon May 7 21:58:55 BST 2007
CPU revision is: 00018448
Determined physical RAM map:
memory: 01000000 @ 14000000 (usable)
Built 1 zonelists. Total pages: 4064
Kernel command line: init=/etc/preinit rootfstype=squashfs,jffs2, console=ttyS0, 115200n8r
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Using 75.000 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13500k/16388k available (2049k kernel code, 180k reserved, 422k data, 12 4k init)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
vlynq0: regs 0x08611800, irq 29, mem 0x04000000
vlynq1: regs 0x08611c00, irq 33, mem 0x0c000000
vlynq0: linked
vlynq-pci: attaching device TI ACX111 at vlynq0
Generic PHY: Registered new driver
NET: Registered protocol family 2
IP route cache hash table entries: 128 (order: -3, 512 bytes)
TCP established hash table entries: 512 (order: -1, 2048 bytes)
TCP bind hash table entries: 256 (order: -2, 1024 bytes)
TCP: Hash tables configured (established 512 bind 256)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
ar7_wdt: timer margin 59 seconds (prescale 65535, change 57180, freq 62500000)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a TI-AR7
serial8250: ttyS1 at MMIO 0x8610f00 (irq = 16) is a TI-AR7
Fixed PHY: Registered new driver
device_bind_driver: device fixed@100:1 already bound
cpmac-mii: probed
cpmac: device eth0 (regs: 08612800, irq: 41, phy: fixed@100:1, mac: 00:0f:b5:db: f6:8d)
cpmac: device eth1 (regs: 08610000, irq: 27, phy: 0:1f, mac: 00:0f:b5:db:f6:8c)
physmap platform flash device: 00400000 at 10000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Parsing AR7 partition map...
4 ar7part partitions found on MTD device physmap-flash.0
Creating 4 MTD partitions on "physmap-flash.0":
0x00000000-0x00010000 : "loader"
0x003f0000-0x00400000 : "config"
0x00020000-0x003f0000 : "linux"
0x000e59dc-0x003f0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-o nly
0x00200000-0x003f0000 : "rootfs_data"
Registered led device: ar7:status
ip_conntrack version 2.4 (128 buckets, 1024 max) - 240 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Time: MIPS clocksource has been installed.
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 124k freed
Warning: unable to open an initial console.
Algorithmics/MIPS FPU Emulator v1.5
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
Unlocking rootfs ...
Could not open mtd device: rootfs
switching to jffs2
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... done.
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
init started: BusyBox v1.4.1 (2007-05-06 23:19:29 BST) multi-call binary
Please press Enter to activate this console. PHY: fixed@100:1 - Link is Up - 10/Half
NET: Registered protocol family 8
NET: Registered protocol family 20
PPP generic driver version 2.4.2
acx: this driver is still EXPERIMENTAL
acx: reading README file and/or Craig's HOWTO is recommended, visit http://acx100.sf.net in case of furt her questions/discussion
acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware uploa d. Report them
running on a little-endian CPU
PCI module v0.3.36 initialized, waiting for cards to probe...
PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
acx: found ACX111-based wireless network card at 0000:00:00.0, irq:80, phymem1:0x4000000, phymem2:0x4022 000, mem1:0xa4000000, mem1_size:8192, mem2:0xa4022000, mem2_size:131072
initial debug setting is 0x000A
using IRQ 80
vlynq0: Read of unknown register 0x38 (size 4)
acx: need to load firmware for acx111 chipset with radio ID 16, please provide via firmware hotplug:
acx: either one file only (<c>ombined firmware image file, radio-specific) or two files (radio-less base image file *plus* separate <r>adio-specific extension file)
requesting firmware image 'tiacx111c16'
acx: firmware image 'tiacx111c16' was not provided. Check your hotplug scripts
requesting firmware image 'tiacx111'
acx: firmware image 'tiacx111' was not provided. Check your hotplug scripts
acx: reset_dev() FAILED
pci_set_power_state(): 0000:00:00.0: state=3, current state=5
acx_pci: probe of 0000:00:00.0 failed with error -5
registered device TI Avalanche SAR
Sangam detected
requesting firmware image "ar0700xx.bin"
Creating new root folder avalanche in the proc for the driver stats
Texas Instruments ATM driver: version:[7.01.00.10]