rendered paste bodynorman@gruber:~$ dmesg >file.txt
norman@gruber:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-386 (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Sun Apr 15 07:34:00 UTC 2007 (Ubuntu 2.6.20-15.27-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000c0000 size: 0000000000040000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 0000000037c17000 end: 0000000037d17000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 0000000037d17000 size: 0000000000008000 end: 0000000037d1f000 type: 2
[ 0.000000] copy_e820_map() start: 0000000037d1f000 size: 000000000008a000 end: 0000000037da9000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 0000000037da9000 size: 0000000000004000 end: 0000000037dad000 type: 2
[ 0.000000] copy_e820_map() start: 0000000037dad000 size: 00000000000c4000 end: 0000000037e71000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 0000000037e71000 size: 000000000007e000 end: 0000000037eef000 type: 4
[ 0.000000] copy_e820_map() start: 0000000037eef000 size: 0000000000011000 end: 0000000037f00000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000c0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037d17000 (usable)
[ 0.000000] BIOS-e820: 0000000037d17000 - 0000000037d1f000 (reserved)
[ 0.000000] BIOS-e820: 0000000037d1f000 - 0000000037da9000 (usable)
[ 0.000000] BIOS-e820: 0000000037da9000 - 0000000037dad000 (reserved)
[ 0.000000] BIOS-e820: 0000000037dad000 - 0000000037e71000 (usable)
[ 0.000000] BIOS-e820: 0000000037e71000 - 0000000037eef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037eef000 - 0000000037f00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 894MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe6a0
[ 0.000000] Entering add_active_range(0, 0, 228977) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 228977
[ 0.000000] HighMem 228977 -> 228977
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 228977
[ 0.000000] On node 0 totalpages: 228977
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1756 pages used for memmap
[ 0.000000] Normal zone: 223125 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 INTEL ) @ 0x000fe020
[ 0.000000] ACPI: RSDT (v001 INTEL D11020M 0x00000429 0x01000013) @ 0x37efe038
[ 0.000000] ACPI: FADT (v001 INTEL D11020M 0x00000429 MSFT 0x01000013) @ 0x37efd000
[ 0.000000] ACPI: MADT (v001 INTEL D11020M 0x00000429 MSFT 0x01000013) @ 0x37ef8000
[ 0.000000] ACPI: MCFG (v001 INTEL D11020M 0x00000429 MSFT 0x01000013) @ 0x37ef7000
[ 0.000000] ACPI: DSDT (v001 INTEL D11020M 0x00000429 MSFT 0x01000013) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 37f00000:c8080000)
[ 0.000000] Detected 2800.568 MHz processor.
[ 24.036236] Built 1 zonelists. Total pages: 227189
[ 24.036239] Kernel command line: root=UUID=a3f9be1c-972b-4c0b-b9a4-a075513e4756 ro quiet splash
[ 24.036415] mapped APIC to ffffd000 (fee00000)
[ 24.036418] mapped IOAPIC to ffffc000 (fec00000)
[ 24.036421] Enabling fast FPU save and restore... done.
[ 24.036425] Enabling unmasked SIMD FPU exception support... done.
[ 24.036438] Initializing CPU#0
[ 24.036537] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 24.037630] Console: colour VGA+ 80x25
[ 24.038266] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 24.039289] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 24.056098] Memory: 895440k/915908k available (1916k kernel code, 19532k reserved, 864k data, 328k init, 0k highmem)
[ 24.056109] virtual kernel memory layout:
[ 24.056110] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
[ 24.056111] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.056113] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 24.056114] lowmem : 0xc0000000 - 0xf7e71000 ( 894 MB)
[ 24.056115] .init : 0xc03ba000 - 0xc040c000 ( 328 kB)
[ 24.056116] .data : 0xc02df353 - 0xc03b7434 ( 864 kB)
[ 24.056117] .text : 0xc0100000 - 0xc02df353 (1916 kB)
[ 24.056120] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.132366] Calibrating delay using timer specific routine.. 5606.79 BogoMIPS (lpj=11213586)
[ 24.132399] Security Framework v1.0.0 initialized
[ 24.132405] SELinux: Disabled at boot.
[ 24.132417] Mount-cache hash table entries: 512
[ 24.132517] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[ 24.132526] monitor/mwait feature present.
[ 24.132528] using mwait in idle threads.
[ 24.132534] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 24.132536] CPU: L2 cache: 256K
[ 24.132539] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000651d 00000000 00000001
[ 24.132550] Compat vDSO mapped to ffffe000.
[ 24.132553] Remapping vsyscall page to ffffe000
[ 24.132566] CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 09
[ 24.132575] Checking 'hlt' instruction... OK.
[ 24.148771] Early unpacking initramfs... done
[ 24.492097] ACPI: Core revision 20060707
[ 24.493857] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 24.506185] ENABLING IO-APIC IRQs
[ 24.506388] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 24.546049] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 24.546099] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 24.546102] ...trying to set up timer as Virtual Wire IRQ... works.
[ 24.691557] Booting paravirtualized kernel on bare hardware
[ 24.691674] Time: 16:31:46 Date: 04/17/107
[ 24.691707] NET: Registered protocol family 16
[ 24.691824] EISA bus registered
[ 24.691831] ACPI: bus type pci registered
[ 24.695258] PCI: Using configuration type 1
[ 24.695260] Setting up standard PCI resources
[ 24.709671] ACPI: Interpreter enabled
[ 24.709677] ACPI: Using IOAPIC for interrupt routing
[ 24.710398] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.710411] PCI: Probing PCI hardware (bus 00)
[ 24.710474] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 24.711828] Boot video device is 0000:01:05.0
[ 24.712181] PCI: Transparent bridge - 0000:00:14.4
[ 24.712233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.715463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 24.718524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 24.719432] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.719693] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.719940] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.720192] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.720438] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.720688] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.720940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.721195] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.721298] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 24.721318] pnp: PnP ACPI init
[ 24.724677] pnp: PnP ACPI: found 12 devices
[ 24.724685] PnPBIOS: Disabled by ACPI PNP
[ 24.724745] PCI: Using ACPI for IRQ routing
[ 24.724749] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 24.724860] NET: Registered protocol family 8
[ 24.724863] NET: Registered protocol family 20
[ 24.725142] pnp: 00:07: ioport range 0x400-0x4cf could not be reserved
[ 24.725146] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 24.725535] PCI: Bridge: 0000:00:01.0
[ 24.725540] IO window: 2000-2fff
[ 24.725544] MEM window: 60100000-601fffff
[ 24.725548] PREFETCH window: 40000000-5fffffff
[ 24.725553] PCI: Bridge: 0000:00:14.4
[ 24.725557] IO window: 1000-1fff
[ 24.725564] MEM window: 60000000-600fffff
[ 24.725570] PREFETCH window: disabled.
[ 24.725619] NET: Registered protocol family 2
[ 24.763255] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.763461] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[ 24.764062] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 24.764433] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.764439] TCP reno registered
[ 24.775336] checking if image is initramfs... it is
[ 25.449629] Freeing initrd memory: 8053k freed
[ 25.450206] audit: initializing netlink socket (disabled)
[ 25.450221] audit(1179419506.456:1): initialized
[ 25.450348] VFS: Disk quotas dquot_6.5.1
[ 25.450368] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 25.450423] io scheduler noop registered
[ 25.450427] io scheduler anticipatory registered
[ 25.450429] io scheduler deadline registered
[ 25.450437] io scheduler cfq registered (default)
[ 25.450733] isapnp: Scanning for PnP cards...
[ 25.802192] isapnp: No Plug & Play device found
[ 25.879894] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 25.880077] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 25.881904] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 25.882335] mice: PS/2 mouse device common for all mice
[ 25.883045] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 25.883235] input: Macintosh mouse button emulation as /class/input/input0
[ 25.883290] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 25.883295] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 25.883632] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 25.886065] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 25.886071] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 25.886241] EISA: Probing bus 0 at eisa.0
[ 25.886253] Cannot allocate resource for EISA slot 1
[ 25.886255] Cannot allocate resource for EISA slot 2
[ 25.886257] Cannot allocate resource for EISA slot 3
[ 25.886285] EISA: Detected 0 cards.
[ 25.916331] TCP cubic registered
[ 25.916340] NET: Registered protocol family 1
[ 25.916363] Using IPI Shortcut mode
[ 25.916466] ACPI: (supports S0 S1 S3 S4 S5)
[ 25.916521] Magic number: 7:445:540
[ 25.917006] Freeing unused kernel memory: 328k freed
[ 25.917039] Time: tsc clocksource has been installed.
[ 25.938495] input: AT Translated Set 2 keyboard as /class/input/input1
[ 27.183847] Capability LSM initialized
[ 27.202328] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 27.240379] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 27.316498] md: linear personality registered for level -1
[ 27.326205] md: multipath personality registered for level -4
[ 27.341931] md: raid0 personality registered for level 0
[ 27.346136] md: raid1 personality registered for level 1
[ 27.349583] raid5: automatically using best checksumming function: pIII_sse
[ 27.366335] pIII_sse : 4269.000 MB/sec
[ 27.366338] raid5: using function: pIII_sse (4269.000 MB/sec)
[ 27.434234] raid6: int32x1 667 MB/s
[ 27.502145] raid6: int32x2 801 MB/s
[ 27.569960] raid6: int32x4 660 MB/s
[ 27.637919] raid6: int32x8 519 MB/s
[ 27.705729] raid6: mmxx1 1679 MB/s
[ 27.773587] raid6: mmxx2 1978 MB/s
[ 27.841466] raid6: sse1x1 990 MB/s
[ 27.909332] raid6: sse1x2 1945 MB/s
[ 27.977210] raid6: sse2x1 2018 MB/s
[ 28.045089] raid6: sse2x2 2975 MB/s
[ 28.045092] raid6: using algorithm sse2x2 (2975 MB/s)
[ 28.045096] md: raid6 personality registered for level 6
[ 28.045098] md: raid5 personality registered for level 5
[ 28.045100] md: raid4 personality registered for level 4
[ 28.078317] md: raid10 personality registered for level 10
[ 28.610320] SCSI subsystem initialized
[ 28.616333] libata version 2.20 loaded.
[ 28.620231] sata_sil 0000:00:11.0: version 2.2
[ 28.620270] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 16
[ 28.620363] ata1: SATA max UDMA/100 cmd 0xf8836680 ctl 0xf883668a bmdma 0xf8836600 irq 16
[ 28.620393] ata2: SATA max UDMA/100 cmd 0xf88366c0 ctl 0xf88366ca bmdma 0xf8836608 irq 16
[ 28.620409] scsi0 : sata_sil
[ 28.632792] usbcore: registered new interface driver usbfs
[ 28.632820] usbcore: registered new interface driver hub
[ 28.632846] usbcore: registered new device driver usb
[ 28.633723] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 28.725591] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 28.739062] ieee1394: Initialized config rom entry `ip1394'
[ 28.813558] Floppy drive(s): fd0 is 1.44M
[ 28.852987] FDC 0 is a post-1991 82077
[ 28.931431] ata1: SATA link down (SStatus 0 SControl 310)
[ 28.931457] scsi1 : sata_sil
[ 29.242850] ata2: SATA link down (SStatus 0 SControl 310)
[ 29.242978] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 29.243053] ata3: SATA max UDMA/100 cmd 0xf8966480 ctl 0xf896648a bmdma 0xf8966400 irq 17
[ 29.243087] ata4: SATA max UDMA/100 cmd 0xf89664c0 ctl 0xf89664ca bmdma 0xf8966408 irq 17
[ 29.243106] scsi2 : sata_sil
[ 29.710012] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 29.757159] ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 29.757166] ata3.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
[ 29.757169] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 29.815355] ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 29.815364] ata3.00: configured for UDMA/100
[ 29.815383] scsi3 : sata_sil
[ 30.125206] ata4: SATA link down (SStatus 0 SControl 310)
[ 30.125371] scsi 2:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 30.125952] PCI: Enabling device 0000:00:13.0 (0000 -> 0002)
[ 30.125967] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 30.125985] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 30.126291] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 30.126321] ohci_hcd 0000:00:13.0: irq 18, io mem 0x60204000
[ 30.137393] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 30.137409] sda: Write Protect is off
[ 30.137412] sda: Mode Sense: 00 3a 00 00
[ 30.137428] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.137503] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 30.137513] sda: Write Protect is off
[ 30.137516] sda: Mode Sense: 00 3a 00 00
[ 30.137529] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.137533] sda: sda1 sda2 < sda5 >
[ 30.173962] sd 2:0:0:0: Attached scsi disk sda
[ 30.178558] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 30.185238] usb usb1: configuration #1 chosen from 1 choice
[ 30.185277] hub 1-0:1.0: USB hub found
[ 30.185292] hub 1-0:1.0: 4 ports detected
[ 30.289048] PCI: Enabling device 0000:00:13.1 (0000 -> 0002)
[ 30.289058] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[ 30.289084] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 30.289114] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 30.289134] ohci_hcd 0000:00:13.1: irq 18, io mem 0x60205000
[ 30.349014] usb usb2: configuration #1 chosen from 1 choice
[ 30.349048] hub 2-0:1.0: USB hub found
[ 30.349067] hub 2-0:1.0: 4 ports detected
[ 30.380870] kjournald starting. Commit interval 5 seconds
[ 30.380885] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.452874] PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
[ 30.452885] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 30.452909] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 30.452950] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 30.453015] ehci_hcd 0000:00:13.2: irq 18, io mem 0x60206000
[ 30.453098] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 30.453207] usb usb3: configuration #1 chosen from 1 choice
[ 30.453241] hub 3-0:1.0: USB hub found
[ 30.453249] hub 3-0:1.0: 8 ports detected
[ 30.556641] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 30.556669] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
[ 30.556685] ATIIXP: chipset revision 128
[ 30.556688] ATIIXP: not 100% native mode: will probe irqs later
[ 30.556699] ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:pio
[ 30.556719] ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:pio, hdd:pio
[ 30.556729] Probing IDE interface ide0...
[ 31.131370] usb 3-7: new high speed USB device using ehci_hcd and address 3
[ 31.264072] usb 3-7: configuration #1 chosen from 1 choice
[ 31.291487] hda: TSSTcorpCD/DVDW SH-S182D, ATAPI CD/DVD-ROM drive
[ 31.566522] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 31.773299] usb 2-2: configuration #1 chosen from 1 choice
[ 31.962311] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 31.965393] Probing IDE interface ide1...
[ 32.532952] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 32.532956] 8139cp 0000:02:02.0: Try the "8139too" driver instead.
[ 32.533175] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 32.585065] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[60000000-600007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 33.862386] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000010000000443]
[ 40.995270] Linux agpgart interface v0.102 (c) Dave Jones
[ 41.251037] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 41.395841] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.406719] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.432301] Real Time Clock Driver v1.12ac
[ 41.464643] input: PC Speaker as /class/input/input2
[ 41.572954] dib0700: loaded with support for 2 different device-types
[ 41.662000] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
[ 41.701505] 8139too Fast Ethernet driver 0.9.28
[ 41.701595] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 41.702334] eth0: RealTek RTL8139 at 0xf8ab8000, 00:16:76:b2:ec:30, IRQ 21
[ 41.702337] eth0: Identified 8139 chip type 'RTL-8101'
[ 41.745714] parport: PnPBIOS parport detected.
[ 41.745801] parport0: PC-style at 0x378 (0x778), irq 7, dma 4 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 41.746391] parport0: dma 4 in use, resorting to PIO operation
[ 41.747434] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 41.747443] Uniform CD-ROM driver Revision: 3.20
[ 42.183905] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input3
[ 42.341812] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19
[ 42.389700] dvb-usb: did not find the firmware file. (dvb-usb-dib0700-01.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[ 42.389727] usbcore: registered new interface driver dvb_usb_dib0700
[ 42.417623] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 42.562477] NET: Registered protocol family 10
[ 42.562569] lo: Disabled Privacy Extensions
[ 42.783430] lp0: using parport0 (interrupt-driven).
[ 43.059591] ieee1394: raw1394: /dev/raw1394 device initialized
[ 43.137634] Adding 2642652k swap on /dev/disk/by-uuid/f9cd249d-e565-4637-a485-0b8b8fa33624. Priority:-1 extents:1 across:2642652k
[ 43.210389] EXT3 FS on sda1, internal journal
[ 44.558737] Adding 2642652k swap on /dev/disk/by-uuid/f9cd249d-e565-4637-a485-0b8b8fa33624. Priority:-2 extents:1 across:2642652k
[ 46.007606] NET: Registered protocol family 17
[ 50.334621] input: Power Button (FF) as /class/input/input4
[ 50.339699] ACPI: Power Button (FF) [PWRF]
[ 50.374612] input: Power Button (CM) as /class/input/input5
[ 50.379593] ACPI: Power Button (CM) [PWRB]
[ 50.398399] Using specific hotkey driver
[ 50.431729] No dock devices found.
[ 50.476018] ibm_acpi: ec object not found
[ 50.605811] pcc_acpi: loading...
[ 52.607286] eth0: no IPv6 routers present
[ 57.556878] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 57.564918] [fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes.
[ 57.565205] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[ 57.603339] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 20
[ 58.868869] ppdev: user-space parallel port driver
[ 62.425751] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 62.602714] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 62.602721] apm: overridden by ACPI.
[ 66.510413] Bluetooth: Core ver 2.11
[ 66.510481] NET: Registered protocol family 31
[ 66.510484] Bluetooth: HCI device and connection manager initialized
[ 66.510488] Bluetooth: HCI socket layer initialized
[ 66.554065] Bluetooth: L2CAP ver 2.8
[ 66.554071] Bluetooth: L2CAP socket layer initialized
[ 66.836399] Bluetooth: RFCOMM socket layer initialized
[ 66.836416] Bluetooth: RFCOMM TTY layer initialized
[ 66.836419] Bluetooth: RFCOMM ver 1.8
[ 273.894814] usb 3-7: USB disconnect, address 3
[ 277.923380] usb 3-7: new high speed USB device using ehci_hcd and address 4
[ 278.056021] usb 3-7: configuration #1 chosen from 1 choice
[ 278.056304] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
[ 278.100126] dvb-usb: did not find the firmware file. (dvb-usb-dib0700-01.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
[ 6035.298868] usb 3-7: USB disconnect, address 4
[ 6105.256449] usb 3-7: new high speed USB device using ehci_hcd and address 5
[ 6105.389183] usb 3-7: configuration #1 chosen from 1 choice
[ 6105.389457] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
[ 6105.436769] dvb-usb: did not find the firmware file. (dvb-usb-dib0700-01.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
norman@gruber:~$ pastbin
bash: pastbin: command not found
norman@gruber:~$ Is pastbin