rendered paste body == Registered translator 'alawtoulaw' from format alaw to ulaw, cost 1
== Registered translator 'ulawtoalaw' from format ulaw to alaw, cost 1
[app_changrab.so] => (Take over an existing channel and bridge to it.)
== Registered application 'ChanGrab'
CallWeaver Ready.
*CLI> -- Executing Set("SIP/3000-bebb", "LOCALSTATIONID=Navynet.it FAX") in
new stack
-- Executing Set("SIP/3000-bebb", "LOCALHEADERINFO=Navynet SRL is a solution
provider for business") in new stack
-- Executing Set("SIP/3000-bebb", "FAXFILE=/tmp/1179334636.0.tif") in new st
ack
-- Executing Set("SIP/3000-bebb", "FAXFILENOEXT=/tmp/1179334636.0") in new s
tack
-- Executing RxFAX("SIP/3000-bebb", "/tmp/1179334636.0.tif|ecm|debug") in ne
w stack
May 16 17:57:17 NOTICE[3051465616]: app_rxfax.c:499 rxfax_audio: Switching to ge
nerator mode
P[ 1] I IND :NEW_CHANNEL oad: dad:32 pid:2 state:none
P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan: dnumplan:0 rnumplan: cpnnumplan:0
P[ 1] Chan not existing at the moment bc->l3id:20002 bc:0x80acdc4 event:NEW_CHAN
NEL port:1 channel:1
P[ 1] I IND :SETUP oad: dad:32 pid:2 state:none
P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan: dnumplan:0 rnumplan: cpnnumplan:0
P[ 1] --> Bearer: Speech
P[ 1] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad:32 oad:
P[ 1] --> CTON: Unknown
P[ 1] EXPORT_PID: pid:2
P[ 1] --> PRES: Restricted (0)
P[ 1] --> SCREEN: Unscreened (0)
P[ 1] I SEND:PROCEEDING oad: dad:32 pid:2
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan: dnumplan:0 rnumplan: cpnnumplan:0
-- Executing Set("mISDN/1-u1", "LOCALSTATIONID=Navynet.it FAX") in new stack
-- Executing Set("mISDN/1-u1", "LOCALHEADERINFO=Navynet SRL is a solution pr ovider for business") in new stack
-- Executing Set("mISDN/1-u1", "FAXFILE=/tmp/1179334678.1.tif") in new stack
-- Executing Set("mISDN/1-u1", "FAXFILENOEXT=/tmp/1179334678.1") in new stac k
-- Executing RxFAX("mISDN/1-u1", "/tmp/1179334678.1.tif|ecm|debug") in new s tack
P[ 1] * ANSWER:
P[ 1] --> ECHO OFF
P[ 1] --> empty cad using dad
P[ 1] I SEND:CONNECT oad: dad:32 pid:2
P[ 1] --> bc_state:BCHAN_CLEANED
P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:32
P[ 1] --> info_dad: onumplan: dnumplan:0 rnumplan: cpnnumplan:0
P[ 1] --> TRANSPARENT Mode
P[ 1] bchan: DL_ESTABLISH|CNF
P[ 1] After SETUP BC
P[ 1] ec_enable
P[ 1] I IND :CONNECT_ACKNOWLEDGE oad: dad:32 pid:2 state:CONNECTED
P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:32
P[ 1] --> info_dad: onumplan: dnumplan:0 rnumplan: cpnnumplan:0
*CLI>