cat /var/log/boot
Wed Apr 12 06:07:46 2006: .
Wed Apr 12 06:07:46 2006: Setting parameters of disc: (none).
Wed Apr 12 06:07:46 2006: Will now activate swap.
Wed Apr 12 06:07:46 2006: swapon on /dev/hda6
Wed Apr 12 06:07:46 2006: Done activating swap.
Wed Apr 12 06:07:46 2006: Will now check root file system.
Wed Apr 12 06:07:46 2006: fsck 1.39-WIP (31-Dec-2005)
Wed Apr 12 06:07:46 2006: [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hda1
Wed Apr 12 06:07:46 2006: /: clean, 493061/2562240 files, 3931847/5120710 blocks (check in 5 mounts)
Wed Apr 12 06:07:46 2006: Done checking root file system.
Wed Apr 12 06:07:46 2006: A log will be saved in /var/log/fsck/checkroot if that location is writable.
Wed Apr 12 06:07:46 2006: Setting the system clock..
Wed Apr 12 04:07:48 2006: System Clock set. Local time: Wed Apr 12 04:07:48 CEST 2006.
Wed Apr 12 04:07:48 2006: Cleaning up ifupdown...done.
Wed Apr 12 04:07:48 2006: Calculating module dependencies...done.
Wed Apr 12 04:07:50 2006: Loading modules...
Wed Apr 12 04:07:50 2006: ide-cd
Wed Apr 12 04:07:50 2006: ide-disk
Wed Apr 12 04:07:50 2006: ide-generic
Wed Apr 12 04:07:50 2006: psmouse
Wed Apr 12 04:07:50 2006: sbp2
Wed Apr 12 04:07:51 2006: sr_mod
Wed Apr 12 04:07:51 2006: i810_audio
Wed Apr 12 04:07:51 2006: FATAL: Module i810_audio not found.
Wed Apr 12 04:07:51 2006: All modules loaded.
Wed Apr 12 04:07:51 2006: Setting the system clock again..
Wed Apr 12 04:07:52 2006: System Clock set. Local time: Wed Apr 12 04:07:52 CEST 2006.
Wed Apr 12 04:07:52 2006: Will now check all file systems.
Wed Apr 12 04:07:52 2006: fsck 1.39-WIP (31-Dec-2005)
Wed Apr 12 04:07:52 2006: Checking all file systems.
Wed Apr 12 04:07:52 2006: [/sbin/fsck.ext3 (1) -- /suse] fsck.ext3 -a -C0 /dev/hda3
Wed Apr 12 04:07:52 2006: /dev/hda3: recovering journal
Wed Apr 12 04:07:52 2006: /dev/hda3: clean, 290539/1311552 files, 1458000/2622611 blocks
Wed Apr 12 04:07:52 2006: [/sbin/fsck.ext3 (1) -- /masgigas] fsck.ext3 -a -C0 /dev/hda4
Wed Apr 12 04:07:52 2006: /dev/hda4: recovering journal
Wed Apr 12 04:07:52 2006: /dev/hda4: clean, 161095/3276800 files, 4333557/6552511 blocks
Wed Apr 12 04:07:52 2006: [/sbin/fsck.ext3 (1) -- /gigas] fsck.ext3 -a -C0 /dev/hda5
Wed Apr 12 04:07:52 2006: /: recovering journal
Wed Apr 12 04:07:52 2006: /: clean, 90430/1030176 files, 582554/2058320 blocks (check in 2 mounts)
Wed Apr 12 04:07:52 2006: Done checking file systems.
Wed Apr 12 04:07:52 2006: A log is being saved in /var/log/fsck/checkfs if that location is writable.
Wed Apr 12 04:07:52 2006: Setting kernel variables ...
Wed Apr 12 04:07:52 2006: ... done.
Wed Apr 12 04:07:52 2006: Will now mount local filesystems.
Wed Apr 12 04:07:52 2006: /dev/hda3 on /suse type ext3 (rw)
Wed Apr 12 04:07:52 2006: /dev/hda4 on /masgigas type ext3 (rw)
Wed Apr 12 04:07:53 2006: /dev/hda5 on /gigas type ext3 (rw)
Wed Apr 12 04:07:53 2006: /dev on /mnt/etch/dev type none (rw,bind)
Wed Apr 12 04:07:53 2006: /var/cache/apt/archives on /mnt/etch/var/cache/apt/archives type none (rw,bind)
Wed Apr 12 04:07:53 2006: Done mounting local filesystems.
Wed Apr 12 04:07:53 2006: Will now activate swapfile swap.
Wed Apr 12 04:07:53 2006: Done activating swapfile swap.
Wed Apr 12 04:07:53 2006: Discovering hardware: usb-uhci ehci-hcd piix snd-intel8x0 yenta_socket ohci1394 r8169
Wed Apr 12 04:07:53 2006: Skipping usb-uhci; assuming it is compiled into the kernel.
Wed Apr 12 04:07:53 2006: Loading ehci-hcd:
Wed Apr 12 04:07:53 2006: Skipping Module piix. It's already loaded.
Wed Apr 12 04:07:53 2006: Loading snd-intel8x0:
Wed Apr 12 04:07:53 2006: Skipping Module yenta_socket. It's already loaded.
Wed Apr 12 04:07:53 2006: Skipping Module ohci1394. It's already loaded.
Wed Apr 12 04:07:54 2006: Skipping Module r8169. It's already loaded.
Wed Apr 12 04:07:54 2006: Cleaning /tmp...done.
Wed Apr 12 04:07:54 2006: Cleaning /var/run...done.
Wed Apr 12 04:07:54 2006: Cleaning /var/lock...done.
Wed Apr 12 04:07:54 2006: Running 0dns-down to make sure resolv.conf is ok...done.
Wed Apr 12 04:07:54 2006: Setting up networking...done.
Wed Apr 12 04:07:54 2006: Setting hostname to 'gpg4all'...done.
Wed Apr 12 04:07:54 2006: ^[[33m*^[[39;49m /etc/network/options is deprecated.
Wed Apr 12 04:07:54 2006: Setting up IP spoofing protection...done (rp_filter).
Wed Apr 12 04:07:54 2006: Configuring network interfaces...Internet Software Consortium DHCP Client 2.0pl5
Wed Apr 12 04:07:55 2006: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
Wed Apr 12 04:07:55 2006: All rights reserved.
Wed Apr 12 04:07:55 2006:
Wed Apr 12 04:07:55 2006: Please contribute if you find this software useful.
Wed Apr 12 04:07:55 2006: For info, please visit http://www.isc.org/dhcp-contrib.html
Wed Apr 12 04:07:55 2006:
Wed Apr 12 04:07:55 2006: eth1: unknown hardware address type 24
Wed Apr 12 04:07:56 2006: eth1: unknown hardware address type 24
Wed Apr 12 04:07:56 2006: Listening on LPF/eth0/00:90:f5:27:08:17
Wed Apr 12 04:07:56 2006: Sending on LPF/eth0/00:90:f5:27:08:17
Wed Apr 12 04:07:56 2006: Sending on Socket/fallback/fallback-net
Wed Apr 12 04:07:56 2006: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
Wed Apr 12 04:08:03 2006: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
Wed Apr 12 04:08:03 2006: DHCPOFFER from 10.112.0.1
Wed Apr 12 04:08:03 2006: DHCPREQUEST on eth0 to 255.255.255.255 port 67
Wed Apr 12 04:08:03 2006: DHCPACK from 10.112.0.1
Wed Apr 12 04:08:03 2006: bound to 62.43.35.104 -- renewal in 2763 seconds.
Wed Apr 12 04:08:03 2006: done.
Wed Apr 12 04:08:03 2006: Starting PCMCIA services....
Wed Apr 12 04:08:04 2006: Starting portmap daemon....
Wed Apr 12 04:08:05 2006: ^[]RSetting up general console font... done.
Wed Apr 12 04:08:06 2006: Setting up per-VC ACM's: /dev/tty1 (iso15), /dev/tty2 (iso15), /dev/tty3 (iso15), /dev/tty4 (iso15), /dev/tty5 (iso15), /dev/tty6 (iso15), done.
Wed Apr 12 04:08:06 2006: ^[[9;30]^[[14;30]Setting up ALSA...done.
Wed Apr 12 04:08:06 2006: Initializing random number generator...done.
Wed Apr 12 04:08:07 2006: Unable to start guarddog firewall - /etc/rc.firewall does not exist
Wed Apr 12 04:08:07 2006: Setting up guidedog config.../etc/rc.guidedog not found - doing nothing.
Wed Apr 12 04:08:07 2006: Recovering nvi editor sessions... done.
Wed Apr 12 04:08:07 2006: Setting up X server socket directory /tmp/.X11-unix...done.
Wed Apr 12 04:08:07 2006: Setting up ICE socket directory /tmp/.ICE-unix...done.
Wed Apr 12 04:08:07 2006: INIT: Entering runlevel: 2
Wed Apr 12 04:08:07 2006: Starting system log daemon: syslogd.
Wed Apr 12 04:08:07 2006: Starting kernel log daemon: klogd.
Wed Apr 12 04:08:07 2006: Not starting portmap daemon. Already running..
Wed Apr 12 04:08:07 2006: Starting SpamAssassin Mail Filter Daemon: spamd.
Wed Apr 12 04:08:10 2006: Loading ACPI modules:
Wed Apr 12 04:08:10 2006: battery
Wed Apr 12 04:08:10 2006: ac
Wed Apr 12 04:08:11 2006: processor
Wed Apr 12 04:08:11 2006: button
Wed Apr 12 04:08:11 2006: fan
Wed Apr 12 04:08:11 2006: thermal
Wed Apr 12 04:08:11 2006: Starting Advanced Configuration and Power Interface daemon: acpid.
Wed Apr 12 04:08:11 2006: Starting atop system monitor: atop.
Wed Apr 12 04:08:11 2006: Please edit the configuration in /etc/bopm/bopm.conf,
Wed Apr 12 04:08:11 2006: since the default configuration might not fit your environment
Wed Apr 12 04:08:11 2006: and bopm will refuse to start and remove these lines from
Wed Apr 12 04:08:11 2006: /etc/init.d/bopm
Wed Apr 12 04:08:11 2006: Starting Common Unix Printing System: cupsd.
Wed Apr 12 04:08:18 2006: Starting system message bus: dbus-1.
Wed Apr 12 04:08:18 2006: Starting DirMngr: dirmngr.
Wed Apr 12 04:08:18 2006: Starting MTA: exim4.
Wed Apr 12 04:08:19 2006: Cleaning up FIDOGATE lock files.
Wed Apr 12 04:08:19 2006: Starting disk temperature monitoring daemon: /dev/hda.
Wed Apr 12 04:08:19 2006: Starting Network Interface Plugging Daemon:.
Wed Apr 12 04:08:19 2006: Starting internet superserver: inetd.
Wed Apr 12 04:08:19 2006: Starting printer spooler: lpd .
Wed Apr 12 04:08:20 2006: Starting PostgreSQL 7.4 database server: main.
Wed Apr 12 04:08:23 2006: Starting PostgreSQL 8.0 database server: main.
Wed Apr 12 04:08:27 2006: Starting OpenBSD Secure Shell server: sshd.
Wed Apr 12 04:08:28 2006: Starting webmin: webmin.
Wed Apr 12 04:08:28 2006: Saved ALSA mixer settings detected; aumix will not touch mixer.
Wed Apr 12 04:08:28 2006: Starting file alteration monitor: FAM.
Wed Apr 12 04:08:29 2006: Starting NFS common utilities: statd.
Wed Apr 12 04:08:29 2006: Starting deferred execution scheduler: atd.
Wed Apr 12 04:08:29 2006: Starting periodic command scheduler....
Wed Apr 12 04:08:29 2006: Not starting GNOME Display Manager; it is not the default display manager.
Wed Apr 12 04:08:29 2006: Starting K Display Manager: kdm.
Wed Apr 12 04:08:29 2006:
gpg4all:/var/log# dmesg
P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 05
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking if image is initramfs... it is
Freeing initrd memory: 1079k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=3
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #04 (-#07) may be hidden behind transparent bridge #03 (-#03) (try 'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: e8100000-e81fffff
PREFETCH window: f0000000-f7ffffff
PCI: Bus 4, cardbus bridge: 0000:03:00.0
IO window: 00004400-000044ff
IO window: 00004800-000048ff
PREFETCH window: 30000000-31ffffff
MEM window: 34000000-35ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: e8200000-e82fffff
PREFETCH window: 30000000-32ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 177
Simple Boot Flag at 0x41 set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 7500k, total 131072k
vesafb: mode is 1600x1200x16, linelength=3200, pages=33
vesafb: protected mode interface info at c000:5521
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 185
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
Using IPI Shortcut mode
ACPI wakeup devices:
LID SLPB PWRB CRD0 LANC AC97
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 180k freed
Console: switching to colour frame buffer device 200x75
mice: PS/2 mouse device common for all mice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
hda: HTS548080M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA CD/DVDW SD-R6472, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 > hda3 hda4
mbcache: exports duplicate symbol mb_cache_entry_find_next (owned by kernel)
jbd: exports duplicate symbol journal_force_commit (owned by kernel)
kmem_cache_create: duplicate cache ext3_xattr
[<c014ebd0>] kmem_cache_create+0x36d/0x56d
[<c017a409>] mb_cache_create+0x15d/0x1c7
[<e082c0aa>] init_ext3_xattr+0x2f/0x40 [ext3]
[<e082c009>] init_ext3_fs+0x9/0x7b [ext3]
[<c0130576>] sys_init_module+0x142/0x186e
[<c012a064>] autoremove_wake_function+0x0/0x4b
[<c016a55a>] mntput_no_expire+0x1c/0x73
[<c0151e45>] __fput+0x12f/0x161
[<c014f3a4>] filp_close+0x49/0x6d
[<c014ff1f>] sys_close+0x63/0x65
[<c0102bf9>] syscall_call+0x7/0xb
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 1680986
EXT3-fs: hda1: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 128M @ 0xd0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 177, io base 0x00001cc0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hw_random hardware driver 1.0.0 loaded
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 201, io base 0x00001ce0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 193, io base 0x00002000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 177, io base 0x00002020
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Floppy drive(s): fd0 is 1.44M
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 209, io mem 0xe8000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
input: PC Speaker as /class/input/input1
FDC 0 is a National Semiconductor PC87306
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1f.6 to 64
irda_init()
NET: Registered protocol family 23
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
Synaptics Touchpad, model: 1, fw: 5.6, id: 0x9244b1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
intel8x0_measure_ac97_clock: measured 55471 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 177
Yenta: CardBus bridge found at 0000:03:00.0 [1558:0500]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:03:00.0, mfunc 0x00001002, devctl 0x44
Yenta: ISA IRQ mask 0x0830, PCI irq 177
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x32ffffff
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 22 (level, low) -> IRQ 217
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xe082c800, 00:90:f5:27:08:17, IRQ 217
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 21 (level, low) -> IRQ 225
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[225] MMIO=[e8204000-e82047ff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f50000270817]
ts: Compaq touchscreen protocol output
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usbcore: registered new driver hiddev
input: Genius NetScroll+Mini Traveler as /class/input/input3
input: USB HID v1.10 Mouse [Genius NetScroll+Mini Traveler] on usb-0000:00:1d.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Adding 714852k swap on /dev/hda6. Priority:-1 extents:1 across:714852k
EXT3 FS on hda1, internal journal
SCSI subsystem initialized
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
r8169: eth0: link up
NET: Registered protocol family 17
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
ACPI: Thermal Zone [THM0] (50 C)
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
serial8250: too much work for irq3
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5