rendered paste body[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009d800 end: 000000000009d800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009d800 size: 0000000000002800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fefb000 end: 000000003fffb000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fffb000 size: 0000000000004000 end: 000000003ffff000 type: 3
[ 0.000000] copy_e820_map() start: 000000003ffff000 size: 0000000000001000 end: 0000000040000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fffb000 (usable)
[ 0.000000] BIOS-e820: 000000003fffb000 - 000000003ffff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262139) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262139
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262139
[ 0.000000] On node 0 totalpages: 262139
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32508 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ASUS ) @ 0x000f5e20
[ 0.000000] ACPI: RSDT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffb000
[ 0.000000] ACPI: FADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffb0b2
[ 0.000000] ACPI: BOOT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffb030
[ 0.000000] ACPI: MADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x3fffb058
[ 0.000000] ACPI: DSDT (v001 ASUS A7V600 0x00001000 MSFT 0x0100000b) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Detected 1250.161 MHz processor.
[ 24.858805] Built 1 zonelists. Total pages: 260092
[ 24.858810] Kernel command line: root=UUID=161fb093-2fc4-4216-a56a-50856f206ca3 ro quiet splash
[ 24.859076] mapped APIC to ffffd000 (fee00000)
[ 24.859080] mapped IOAPIC to ffffc000 (fec00000)
[ 24.859085] Enabling fast FPU save and restore... done.
[ 24.859089] Enabling unmasked SIMD FPU exception support... done.
[ 24.859107] Initializing CPU#0
[ 24.859203] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 24.861906] Console: colour VGA+ 80x25
[ 24.863134] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 24.864097] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 24.915142] Memory: 1028108k/1048556k available (1992k kernel code, 19692k reserved, 893k data, 328k init, 131052k highmem)
[ 24.915159] virtual kernel memory layout:
[ 24.915161] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 24.915163] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.915165] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 24.915167] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 24.915169] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 24.915171] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 24.915173] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 24.915178] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.995189] Calibrating delay using timer specific routine.. 2502.67 BogoMIPS (lpj=5005357)
[ 24.995270] Security Framework v1.0.0 initialized
[ 24.995286] SELinux: Disabled at boot.
[ 24.995316] Mount-cache hash table entries: 512
[ 24.995598] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 24.995613] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 24.995617] CPU: L2 Cache: 512K (64 bytes/line)
[ 24.995622] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 24.995643] Compat vDSO mapped to ffffe000.
[ 24.995653] Remapping vsyscall page to ffffe000
[ 24.995671] Checking 'hlt' instruction... OK.
[ 25.011444] SMP alternatives: switching to UP code
[ 25.011974] Freeing SMP alternatives: 11k freed
[ 25.012383] Early unpacking initramfs... done
[ 25.510372] ACPI: Core revision 20060707
[ 25.512228] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 25.517633] CPU0: AMD Athlon(TM) XP 2800+ stepping 00
[ 25.517666] Total of 1 processors activated (2502.67 BogoMIPS).
[ 25.518396] ENABLING IO-APIC IRQs
[ 25.518721] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 25.663167] Brought up 1 CPUs
[ 25.663601] Booting paravirtualized kernel on bare hardware
[ 25.663709] Time: 10:12:41 Date: 04/16/107
[ 25.663766] NET: Registered protocol family 16
[ 25.663935] EISA bus registered
[ 25.663942] ACPI: bus type pci registered
[ 25.667317] PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
[ 25.667321] PCI: Using configuration type 1
[ 25.667324] Setting up standard PCI resources
[ 25.695744] ACPI: Interpreter enabled
[ 25.695749] ACPI: Using IOAPIC for interrupt routing
[ 25.696778] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 25.697102] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 25.697417] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 25.697749] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 25.698228] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 25.698633] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 25.699097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12)
[ 25.699435] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
[ 25.699595] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.699604] PCI: Probing PCI hardware (bus 00)
[ 25.700198] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 25.700975] PCI: enabled onboard AC97/MC97 devices
[ 25.701370] Boot video device is 0000:01:00.0
[ 25.701424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.705341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 25.713243] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.713259] pnp: PnP ACPI init
[ 25.720216] pnp: PnP ACPI: found 16 devices
[ 25.720223] PnPBIOS: Disabled by ACPI PNP
[ 25.720303] PCI: Using ACPI for IRQ routing
[ 25.720309] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.727389] NET: Registered protocol family 8
[ 25.727393] NET: Registered protocol family 20
[ 25.727805] pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
[ 25.727811] pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
[ 25.727829] pnp: 00:0f: ioport range 0x290-0x297 has been reserved
[ 25.727834] pnp: 00:0f: ioport range 0x370-0x375 has been reserved
[ 25.728247] PCI: Bridge: 0000:00:01.0
[ 25.728250] IO window: disabled.
[ 25.728257] MEM window: dd000000-dfefffff
[ 25.728262] PREFETCH window: dff00000-f7ffffff
[ 25.728287] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.728336] NET: Registered protocol family 2
[ 25.767235] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 25.767637] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 25.770441] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 25.771874] TCP: Hash tables configured (established 131072 bind 65536)
[ 25.771879] TCP reno registered
[ 25.783317] checking if image is initramfs... it is
[ 26.718887] Freeing initrd memory: 7008k freed
[ 26.719217] Simple Boot Flag at 0x3a set to 0x1
[ 26.719733] audit: initializing netlink socket (disabled)
[ 26.719759] audit(1179310361.940:1): initialized
[ 26.719871] highmem bounce pool size: 64 pages
[ 26.719965] VFS: Disk quotas dquot_6.5.1
[ 26.720006] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 26.720093] io scheduler noop registered
[ 26.720098] io scheduler anticipatory registered
[ 26.720102] io scheduler deadline registered
[ 26.720113] io scheduler cfq registered (default)
[ 26.720213] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 26.720586] isapnp: Scanning for PnP cards...
[ 27.074325] isapnp: No Plug & Play device found
[ 27.114322] Real Time Clock Driver v1.12ac
[ 27.114413] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 27.114572] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.114759] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 27.117250] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.117541] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 27.117846] mice: PS/2 mouse device common for all mice
[ 27.118720] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 27.118991] input: Macintosh mouse button emulation as /class/input/input0
[ 27.119047] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 27.119055] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 27.119360] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 27.119365] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 27.121640] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 27.121647] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 27.121828] EISA: Probing bus 0 at eisa.0
[ 27.121870] Cannot allocate resource for EISA slot 8
[ 27.121874] EISA: Detected 0 cards.
[ 27.152011] TCP cubic registered
[ 27.152021] NET: Registered protocol family 1
[ 27.152052] Using IPI No-Shortcut mode
[ 27.152163] ACPI: (supports S0 S1 S4 S5)
[ 27.152226] Magic number: 7:422:224
[ 27.152314] hash matches device ttyu8
[ 27.152337] hash matches device ttyrb
[ 27.153230] Freeing unused kernel memory: 328k freed
[ 27.154869] Time: tsc clocksource has been installed.
[ 27.170278] input: AT Translated Set 2 keyboard as /class/input/input1
[ 28.488261] Capability LSM initialized
[ 29.297630] PCI: Enabling device 0000:00:09.0 (0014 -> 0017)
[ 29.297651] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 29.297697] skge 1.9 addr 0xdc800000 irq 16 chip Yukon rev 1
[ 29.297850] skge eth0: addr 00:0e:a6:47:8e:c9
[ 29.318707] SCSI subsystem initialized
[ 29.326514] libata version 2.20 loaded.
[ 29.328512] sata_via 0000:00:0f.0: version 2.1
[ 29.328561] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17
[ 29.328595] sata_via 0000:00:0f.0: routed to hard irq line 0
[ 29.328703] ata1: SATA max UDMA/133 cmd 0x0001d400 ctl 0x0001d002 bmdma 0x0001b000 irq 17
[ 29.328762] ata2: SATA max UDMA/133 cmd 0x0001b800 ctl 0x0001b402 bmdma 0x0001b008 irq 17
[ 29.328785] scsi0 : sata_via
[ 29.378858] usbcore: registered new interface driver usbfs
[ 29.378899] usbcore: registered new interface driver hub
[ 29.378940] usbcore: registered new device driver usb
[ 29.474578] USB Universal Host Controller Interface driver v3.0
[ 29.534489] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 29.641858] Floppy drive(s): fd0 is 1.44M
[ 29.705032] ATA: abnormal status 0x7F on port 0x0001d407
[ 29.715605] ATA: abnormal status 0x7F on port 0x0001d407
[ 29.726828] ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
[ 29.726837] ata1.00: ATA-7: Maxtor 6Y080M0, YAR51EW0, max UDMA/133
[ 29.726842] ata1.00: 160086528 sectors, multi 16: LBA
[ 29.738809] ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
[ 29.738820] ata1.00: configured for UDMA/133
[ 29.738842] scsi1 : sata_via
[ 29.783748] FDC 0 is a post-1991 82077
[ 29.946402] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 30.116929] ATA: abnormal status 0x7F on port 0x0001b807
[ 30.127476] ATA: abnormal status 0x7F on port 0x0001b807
[ 30.138717] ata2.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
[ 30.138723] ata2.00: ATA-7: Maxtor 6Y080M0, YAR51BW0, max UDMA/133
[ 30.138728] ata2.00: 160086528 sectors, multi 16: LBA
[ 30.150688] ata2.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
[ 30.150693] ata2.00: configured for UDMA/133
[ 30.150912] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
[ 30.151796] scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
[ 30.152297] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 30.152327] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17
[ 30.152346] VP_IDE: chipset revision 6
[ 30.152350] VP_IDE: not 100% native mode: will probe irqs later
[ 30.152365] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 30.152378] ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:pio, hdb:pio
[ 30.152397] ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio
[ 30.152410] Probing IDE interface ide0...
[ 30.178205] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
[ 30.178235] sda: Write Protect is off
[ 30.178239] sda: Mode Sense: 00 3a 00 00
[ 30.178262] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.178388] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
[ 30.178413] sda: Write Protect is off
[ 30.178417] sda: Mode Sense: 00 3a 00 00
[ 30.178438] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.178444] sda: sda1
[ 30.199582] sd 0:0:0:0: Attached scsi disk sda
[ 30.199827] SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
[ 30.199842] sdb: Write Protect is off
[ 30.199846] sdb: Mode Sense: 00 3a 00 00
[ 30.199866] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.199913] SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
[ 30.199927] sdb: Write Protect is off
[ 30.199930] sdb: Mode Sense: 00 3a 00 00
[ 30.199950] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.199955] sdb: sdb1 sdb2 < sdb5 >
[ 30.243753] sd 1:0:0:0: Attached scsi disk sdb
[ 30.251164] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.251389] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 30.484472] Attempting manual resume
[ 30.484480] swsusp: Resume From Partition 8:21
[ 30.484483] PM: Checking swsusp image.
[ 30.484747] PM: Resume from disk failed.
[ 30.537431] kjournald starting. Commit interval 5 seconds
[ 30.537453] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.730294] Probing IDE interface ide1...
[ 31.046227] hdc: probing with STATUS(0x50) instead of ALTSTATUS(0x7f)
[ 31.218197] hdc: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
[ 31.498148] hdc: probing with STATUS(0x51) instead of ALTSTATUS(0x7f)
[ 31.610235] hdc: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive
[ 32.118051] hdd: probing with STATUS(0x01) instead of ALTSTATUS(0x58)
[ 32.289420] ide1 at 0x170-0x177,0x376 on irq 15
[ 32.293003] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 18
[ 32.293025] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 32.293410] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 32.293453] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000a000
[ 32.293676] usb usb1: configuration #1 chosen from 1 choice
[ 32.293717] hub 1-0:1.0: USB hub found
[ 32.293734] hub 1-0:1.0: 2 ports detected
[ 32.398139] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 18
[ 32.398159] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 32.398190] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 32.398214] uhci_hcd 0000:00:10.1: irq 18, io base 0x00009800
[ 32.398357] usb usb2: configuration #1 chosen from 1 choice
[ 32.398390] hub 2-0:1.0: USB hub found
[ 32.398404] hub 2-0:1.0: 2 ports detected
[ 32.506076] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 18
[ 32.506086] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 32.506114] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 32.506137] uhci_hcd 0000:00:10.2: irq 18, io base 0x00009400
[ 32.506274] usb usb3: configuration #1 chosen from 1 choice
[ 32.506308] hub 3-0:1.0: USB hub found
[ 32.506325] hub 3-0:1.0: 2 ports detected
[ 32.614060] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 18
[ 32.614071] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 32.614100] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 32.614127] uhci_hcd 0000:00:10.3: irq 18, io base 0x00009000
[ 32.614264] usb usb4: configuration #1 chosen from 1 choice
[ 32.614299] hub 4-0:1.0: USB hub found
[ 32.614313] hub 4-0:1.0: 2 ports detected
[ 32.641960] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 32.722123] PCI: Enabling device 0000:00:13.0 (0014 -> 0015)
[ 32.722135] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 32.722151] uhci_hcd 0000:00:13.0: UHCI Host Controller
[ 32.722187] uhci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 32.722216] uhci_hcd 0000:00:13.0: irq 16, io base 0x00008800
[ 32.722382] usb usb5: configuration #1 chosen from 1 choice
[ 32.722421] hub 5-0:1.0: USB hub found
[ 32.722437] hub 5-0:1.0: 2 ports detected
[ 32.830096] PCI: Enabling device 0000:00:13.1 (0014 -> 0015)
[ 32.830115] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 32.830133] uhci_hcd 0000:00:13.1: UHCI Host Controller
[ 32.830170] uhci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 32.830212] uhci_hcd 0000:00:13.1: irq 19, io base 0x00008400
[ 32.830383] usb usb6: configuration #1 chosen from 1 choice
[ 32.830430] hub 6-0:1.0: USB hub found
[ 32.830447] hub 6-0:1.0: 2 ports detected
[ 32.916373] usb 1-1: configuration #1 chosen from 1 choice
[ 32.938348] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 18
[ 32.938368] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 32.938409] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 7
[ 32.938486] ehci_hcd 0000:00:10.4: irq 18, io mem 0xdc000000
[ 32.938495] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 32.938613] usb usb7: configuration #1 chosen from 1 choice
[ 32.938653] hub 7-0:1.0: USB hub found
[ 32.938670] hub 7-0:1.0: 8 ports detected
[ 33.046093] PCI: Enabling device 0000:00:13.2 (0014 -> 0016)
[ 33.046116] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 16 (level, low) -> IRQ 20
[ 33.046134] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 33.046174] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 8
[ 33.046270] ehci_hcd 0000:00:13.2: irq 20, io mem 0xdb800000
[ 33.046279] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 33.046412] usb usb8: configuration #1 chosen from 1 choice
[ 33.046455] hub 8-0:1.0: USB hub found
[ 33.046473] hub 8-0:1.0: 4 ports detected
[ 34.757619] usb 7-5: new high speed USB device using ehci_hcd and address 3
[ 34.917784] usb 7-5: configuration #1 chosen from 1 choice
[ 35.165551] usb 7-6: new high speed USB device using ehci_hcd and address 4
[ 35.310700] usb 7-6: configuration #1 chosen from 1 choice
[ 35.741490] usb 8-3: new high speed USB device using ehci_hcd and address 3
[ 35.888464] usb 8-3: configuration #1 chosen from 1 choice
[ 35.888856] usb 1-1: USB disconnect, address 2
[ 36.129399] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 36.403174] usb 1-1: configuration #1 chosen from 1 choice
[ 36.649354] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 36.838525] usb 5-1: configuration #1 chosen from 1 choice
[ 38.614814] skge eth0: enabling interface
[ 40.003220] NET: Registered protocol family 17
[ 40.750386] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[ 41.498316] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.500659] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.412373] Linux agpgart interface v0.102 (c) Dave Jones
[ 42.769062] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 42.774813] agpgart: AGP aperture is 64M @ 0xf8000000
[ 43.270680] input: PC Speaker as /class/input/input2
[ 43.877864] nvidia: module license 'NVIDIA' taints kernel.
[ 44.232996] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 44.233738] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
[ 44.264312] usbcore: registered new interface driver hiddev
[ 44.320356] usb 7-6: USB disconnect, address 4
[ 44.436107] hdc: ATAPI 48X CD-ROM CD-R/RW drive, 1984kB Cache, UDMA(33)
[ 44.436124] Uniform CD-ROM driver Revision: 3.20
[ 44.448074] usb 7-6: new high speed USB device using ehci_hcd and address 5
[ 44.532710] input: USB OpticalWheel Mouse as /class/input/input3
[ 44.532896] input: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:10.0-1
[ 44.594906] usb 7-6: configuration #1 chosen from 1 choice
[ 44.627290] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21
[ 44.632058] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 44.666278] input: Microsoft� Microsoft� SideWinder� Game Pad USB as /class/input/input4
[ 44.666337] input: USB HID v1.00 Gamepad [Microsoft� Microsoft� SideWinder� Game Pad USB] on usb-0000:00:13.0-1
[ 44.666370] usbcore: registered new interface driver usbhid
[ 44.666376] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 44.726682] parport: PnPBIOS parport detected.
[ 44.726825] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 45.156410] codec_read: codec 0 is not valid [0xfe0000]
[ 45.167274] codec_read: codec 0 is not valid [0xfe0000]
[ 45.178241] codec_read: codec 0 is not valid [0xfe0000]
[ 45.189148] codec_read: codec 0 is not valid [0xfe0000]
[ 45.274327] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[ 45.274344] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 21
[ 46.027798] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 46.531929] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[ 46.531947] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 46.908107] usb 7-6: USB disconnect, address 5
[ 47.035631] usb 7-6: new high speed USB device using ehci_hcd and address 6
[ 47.176937] usb 7-6: configuration #1 chosen from 1 choice
[ 47.206816] usbcore: registered new interface driver libusual
[ 47.240984] usbcore: registered new interface driver xpad
[ 47.240995] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 47.426850] Initializing USB Mass Storage driver...
[ 47.479816] scsi2 : SCSI emulation for USB Mass Storage devices
[ 47.479993] usb-storage: device found at 3
[ 47.479997] usb-storage: waiting for device to settle before scanning
[ 47.480036] scsi3 : SCSI emulation for USB Mass Storage devices
[ 47.480134] usb-storage: device found at 3
[ 47.480138] usb-storage: waiting for device to settle before scanning
[ 47.480167] scsi4 : SCSI emulation for USB Mass Storage devices
[ 47.480240] usbcore: registered new interface driver usb-storage
[ 47.480247] USB Mass Storage support registered.
[ 47.480467] usb-storage: device found at 6
[ 47.480471] usb-storage: waiting for device to settle before scanning
[ 47.786220] fuse init (API version 7.8)
[ 47.822939] lp0: using parport0 (interrupt-driven).
[ 47.871563] Adding 1903660k swap on /dev/disk/by-uuid/98295081-7f44-43f1-b055-aa73a6f1c346. Priority:-1 extents:1 across:1903660k
[ 48.010366] EXT3 FS on sda1, internal journal
[ 48.257988] NET: Registered protocol family 10
[ 48.258165] lo: Disabled Privacy Extensions
[ 48.363724] kjournald starting. Commit interval 5 seconds
[ 48.364014] EXT3 FS on sdb1, internal journal
[ 48.364024] EXT3-fs: mounted filesystem with ordered data mode.
[ 52.491930] usb-storage: device scan complete
[ 52.492111] usb-storage: device scan complete
[ 52.492221] usb-storage: device scan complete
[ 52.496727] scsi 3:0:0:0: Direct-Access WDC WD16 00JB-00GVC0 0000 PQ: 0 ANSI: 0
[ 52.562579] scsi 4:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[ 52.646769] scsi 2:0:0:0: Direct-Access C-ONE 128MB_Tiny 2.00 PQ: 0 ANSI: 0 CCS
[ 52.659273] SCSI device sdc: 247808 512-byte hdwr sectors (127 MB)
[ 52.659969] sdc: Write Protect is off
[ 52.659974] sdc: Mode Sense: 00 06 00 00
[ 52.659977] sdc: assuming drive cache: write through
[ 52.662578] SCSI device sdc: 247808 512-byte hdwr sectors (127 MB)
[ 52.663180] sdc: Write Protect is off
[ 52.663184] sdc: Mode Sense: 00 06 00 00
[ 52.663188] sdc: assuming drive cache: write through
[ 52.663194] sdc: sdc1
[ 52.664333] sd 2:0:0:0: Attached scsi removable disk sdc
[ 52.664413] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 52.665651] SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
[ 52.666741] sdd: Write Protect is off
[ 52.666746] sdd: Mode Sense: 27 00 00 00
[ 52.666749] sdd: assuming drive cache: write through
[ 52.667646] SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
[ 52.668521] sdd: Write Protect is off
[ 52.668524] sdd: Mode Sense: 27 00 00 00
[ 52.668527] sdd: assuming drive cache: write through
[ 52.668531] sdd:<6>No dock devices found.
[ 54.286617] input: Power Button (FF) as /class/input/input5
[ 54.287047] ACPI: Power Button (FF) [PWRF]
[ 54.298504] input: Power Button (CM) as /class/input/input6
[ 54.298960] ACPI: Power Button (CM) [PWRB]
[ 54.438252] ibm_acpi: ec object not found
[ 54.519796] Using specific hotkey driver
[ 54.732856] pcc_acpi: loading...
[ 58.741706] eth0: no IPv6 routers present
[ 62.550347] ppdev: user-space parallel port driver
[ 63.540692] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 63.540701] apm: overridden by ACPI.
[ 64.308689] Bluetooth: Core ver 2.11
[ 64.308823] NET: Registered protocol family 31
[ 64.308826] Bluetooth: HCI device and connection manager initialized
[ 64.308833] Bluetooth: HCI socket layer initialized
[ 64.378857] Bluetooth: L2CAP ver 2.8
[ 64.378866] Bluetooth: L2CAP socket layer initialized
[ 64.533404] Bluetooth: RFCOMM socket layer initialized
[ 64.533432] Bluetooth: RFCOMM TTY layer initialized
[ 64.533436] Bluetooth: RFCOMM ver 1.8
[ 66.249662] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 66.250188] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 66.250644] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 78.954423] eth0: no IPv6 routers present
[ 82.777833] usb 8-3: reset high speed USB device using ehci_hcd and address 3
[ 83.753698] sdd1
[ 83.753829] sd 3:0:0:0: Attached scsi disk sdd
[ 83.753910] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 83.773652] SCSI device sde: 58605120 512-byte hdwr sectors (30006 MB)
[ 83.774651] sde: Write Protect is off
[ 83.774655] sde: Mode Sense: 6c 00 00 08
[ 83.774659] sde: assuming drive cache: write through
[ 83.776450] SCSI device sde: 58605120 512-byte hdwr sectors (30006 MB)
[ 83.777524] sde: Write Protect is off
[ 83.777529] sde: Mode Sense: 6c 00 00 08
[ 83.777532] sde: assuming drive cache: write through
[ 83.777540] sde: sde1 sde2 sde3
[ 85.778112] sd 4:0:0:0: Attached scsi removable disk sde
[ 85.778206] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 168.348137] end_request: I/O error, dev fd0, sector 0
[ 180.534153] end_request: I/O error, dev fd0, sector 0
[ 194.469060] kjournald starting. Commit interval 5 seconds
[ 194.469095] EXT3-fs: mounted filesystem with ordered data mode.
[ 206.935925] kjournald starting. Commit interval 5 seconds
[ 206.935953] EXT3-fs: mounted filesystem with ordered data mode.
[ 254.565461] UDF-fs: No partition found (1)
[ 254.586459] UDF-fs: No partition found (1)
[ 254.699576] Unable to identify CD-ROM format.
[ 254.749200] Unable to identify CD-ROM format.
[ 254.754373] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 254.756009] FAT: bogus number of reserved sectors
[ 254.756016] VFS: Can't find a valid FAT filesystem on dev sdd1.
[ 254.761953] FAT: bogus number of reserved sectors
[ 254.761966] VFS: Can't find a valid FAT filesystem on dev sdd1.
[ 254.778829] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 254.780682] NTFS-fs warning (device sdd1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
[ 254.782358] NTFS-fs error (device sdd1): read_ntfs_boot_sector(): Primary boot sector is invalid.
[ 254.782368] NTFS-fs error (device sdd1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[ 254.782374] NTFS-fs error (device sdd1): ntfs_fill_super(): Not an NTFS volume.
[ 254.857225] NTFS-fs error (device sdd1): read_ntfs_boot_sector(): Primary boot sector is invalid.
[ 254.857240] NTFS-fs error (device sdd1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[ 254.857247] NTFS-fs error (device sdd1): ntfs_fill_super(): Not an NTFS volume.
[ 254.886078] hfs: unable to find HFS+ superblock
[ 254.895467] hfs: unable to find HFS+ superblock
[ 254.924820] hfs: can't find a HFS filesystem on dev sdd1.
[ 254.934444] hfs: can't find a HFS filesystem on dev sdd1.
[ 254.953245] kjournald starting. Commit interval 5 seconds
[ 254.954821] EXT3 FS on sdd1, internal journal
[ 254.955114] EXT3-fs: mounted filesystem with ordered data mode.