rendered paste body# daemon config
telnet_port 4444
gdb_port 3333
daemon_startup reset
# interface
interface parport
parport_port /dev/parport0
parport_cable wiggler
jtag_speed 0
# use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
# jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
jtag_nsrst_delay 500
jtag_ntrst_delay 500
# target configuration
# target <type> <endianess> <reset_mode>
# if chain_pos is not zero it seg faults
target arm926ejs little reset_run 0
#target_script 0 reset h2294_init.script
run_and_halt_time 0 30
working_area 0 0xD0000000 0x40000 nobackup
# flash configuration
# flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum
flash bank cfi 0x80000000 0x400000 2 2 0