rendered paste body 2.963078] ppdev: user-space parallel port driver
[ 2.963105] Linux agpgart interface v0.101 (c) Dave Jones
[ 2.963654] vesafb: framebuffer at 0xc0000000, mapped to 0xf8d00000, using 3072k, total 16384k
[ 2.963682] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[ 2.963687] vesafb: protected mode interface info at c000:aad8
[ 2.963713] vesafb: pmi: set display start = c00cab66, set palette = c00cac28
[ 2.963717] vesafb: scrolling: redraw
[ 2.963744] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 3.017868] ieee1394: Host added: ID:BUS[0-00:1023] GUID[344fc00026180d41]
[ 3.088331] Console: switching to colour frame buffer device 128x48
[ 3.212346] fbsplash: console 0 using theme 'sabayon'
[ 4.041839] fbsplash: switched splash state to 'on' on console 0
[ 4.043494] fb0: VESA VGA frame buffer device
[ 4.045087] ACPI: AC Adapter [AC] (on-line)
[ 4.148030] ACPI: Battery Slot [BAT0] (battery present)
[ 4.148440] input: Lid Switch as /class/input/input0
[ 4.148474] ACPI: Lid Switch [LID]
[ 4.148763] input: Power Button (CM) as /class/input/input1
[ 4.148821] ACPI: Power Button (CM) [PBTN]
[ 4.149113] input: Sleep Button (CM) as /class/input/input2
[ 4.149143] ACPI: Sleep Button (CM) [SBTN]
[ 4.155787] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.157715] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.158065] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 4.158225] Using specific hotkey driver
[ 4.161364] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 4.162381] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 4.163531] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 4.163562] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 4.166321] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 4.167242] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[ 4.168618] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 4.168649] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 4.534000] ACPI: Thermal Zone [THM] (46 C)
[ 4.534000] ibm_acpi: ec object not found
[ 4.534000] isapnp: Scanning for PnP cards...
[ 4.858000] isapnp: No Plug & Play device found
[ 4.858000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 4.862000] Floppy drive(s): fd0 is 1.44M
[ 7.874000] floppy0: no floppy controllers found
[ 7.876000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 7.878000] loop: loaded (max 8 devices)
[ 7.878000] Compaq SMART2 Driver (v 2.6.0)
[ 7.878000] HP CISS Driver (v 3.6.14)
[ 7.879000] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 7.879000] MM: desc_per_page = 128
[ 7.882000] Loading iSCSI transport class v2.0-724.
[ 7.882000] iscsi: registered transport (tcp)
[ 7.883000] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 7.883000] Detecting Adaptec I2O RAID controllers...
[ 7.885000] Adaptec aacraid driver (1.1-5[2423]-mh3)
[ 7.886000] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.2 loaded
[ 7.886000] NCR53c406a: no available ports found
[ 7.886000] sym53c416.c: Version 1.0.0-ac
[ 7.886000] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
[ 7.887000] iscsi: registered transport (qla4xxx)
[ 7.887000] QLogic iSCSI HBA Driver
[ 7.887000] Emulex LightPulse Fibre Channel SCSI driver 8.1.11
[ 7.887000] Copyright(c) 2004-2006 Emulex. All rights reserved.
[ 7.887000] seagate: ST0x/TMC-8xx not detected.
[ 7.910000] Failed initialization of WD-7000 SCSI card!
[ 7.910000] IBM MCA SCSI: Version 4.0b-ac
[ 7.910000] IBM MCA SCSI: No Microchannel-bus present --> Aborting.
[ 7.910000] This machine does not have any IBM MCA-bus
[ 7.910000] or the MCA-Kernel-support is not enabled!
[ 8.972000] DC390: clustering now enabled by default. If you get problems load
[ 8.972000] with "disable_clustering=1" and report to maintainers
[ 8.972000] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 8.972000] megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
[ 8.972000] megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
[ 8.973000] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 8.973000] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 8.973000] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 8.973000] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
[ 8.973000] nsp32: loading...
[ 8.973000] ipr: IBM Power RAID SCSI Device Driver version: 2.3.0 (November 8, 2006)
[ 8.974000] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 8.974000] stex: Promise SuperTrak EX Driver version: 3.1.0.1
[ 8.974000] st: Version 20061107, fixed bufsize 32768, s/g segs 256
[ 8.974000] osst :I: Tape driver with OnStream support version 0.99.4
[ 8.974000] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 8.975000] ata_piix 0000:00:1f.2: version 2.00ac7
[ 8.975000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 8.975000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18
[ 8.975000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 8.975000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
[ 8.975000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
[ 8.975000] scsi2 : ata_piix
[ 9.130000] ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 0/32)
[ 9.130000] ata1.00: ata1: dev 0 multi count 8
[ 9.136000] ata1.00: configured for UDMA/133
[ 9.136000] scsi3 : ata_piix
[ 9.440000] ata2.00: ATAPI, max UDMA/33
[ 9.595000] ata2.00: configured for UDMA/33
[ 9.595000] scsi 2:0:0:0: Direct-Access ATA ST9160821AS 3.AL PQ: 0 ANSI: 5
[ 9.596000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 9.596000] sda: Write Protect is off
[ 9.596000] sda: Mode Sense: 00 3a 00 00
[ 9.596000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.596000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 9.596000] sda: Write Protect is off
[ 9.596000] sda: Mode Sense: 00 3a 00 00
[ 9.596000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.596000] sda: sda1 sda2 sda3 sda4
[ 9.851000] sd 2:0:0:0: Attached scsi disk sda
[ 9.851000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 9.852000] scsi 3:0:0:0: CD-ROM PHILIPS DVD+-RW SDVD8820 AD15 PQ: 0 ANSI: 5
[ 9.864000] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 9.864000] Uniform CD-ROM driver Revision: 3.20
[ 9.864000] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 9.864000] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 9.870000] I2O subsystem v1.325
[ 9.870000] i2o: max drivers = 8
[ 9.870000] I2O Configuration OSM v1.323
[ 9.871000] I2O Bus Adapter OSM v1.317
[ 9.871000] I2O Block Device OSM v1.325
[ 9.871000] I2O SCSI Peripheral OSM v1.316
[ 9.871000] I2O ProcFS OSM v1.316
[ 9.871000] Fusion MPT base driver 3.04.03
[ 9.871000] Copyright (c) 1999-2007 LSI Logic Corporation
[ 9.871000] Fusion MPT SPI Host driver 3.04.03
[ 9.871000] Fusion MPT FC Host driver 3.04.03
[ 9.872000] Fusion MPT SAS Host driver 3.04.03
[ 9.872000] Fusion MPT misc device (ioctl) driver 3.04.03
[ 9.872000] mptctl: Registered with Fusion MPT base driver
[ 9.872000] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 9.872000] Fusion MPT LAN driver 3.04.03
[ 9.872000] usbcore: registered new interface driver usblp
[ 9.872000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 9.872000] Initializing USB Mass Storage driver...
[ 9.872000] usbcore: registered new interface driver usb-storage
[ 9.872000] USB Mass Storage support registered.
[ 9.872000] usbcore: registered new interface driver libusual
[ 9.872000] usbcore: registered new interface driver hiddev
[ 9.872000] usbcore: registered new interface driver usbhid
[ 9.872000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 9.873000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 9.876000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.876000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.894000] parkbd: no such parport
[ 9.894000] mice: PS/2 mouse device common for all mice
[ 9.898000] input: AT Translated Set 2 keyboard as /class/input/input3
[ 10.520000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000
[ 10.560000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 10.563000] md: linear personality registered for level -1
[ 10.563000] md: raid0 personality registered for level 0
[ 10.563000] md: raid1 personality registered for level 1
[ 10.563000] md: raid10 personality registered for level 10
[ 10.580000] raid6: int32x1 140 MB/s
[ 10.597000] raid6: int32x2 152 MB/s
[ 10.614000] raid6: int32x4 132 MB/s
[ 10.631000] raid6: int32x8 113 MB/s
[ 10.648000] raid6: mmxx1 390 MB/s
[ 10.665000] raid6: mmxx2 417 MB/s
[ 10.682000] raid6: sse1x1 320 MB/s
[ 10.699000] raid6: sse1x2 394 MB/s
[ 10.716000] raid6: sse2x1 468 MB/s
[ 10.733000] raid6: sse2x2 492 MB/s
[ 10.733000] raid6: using algorithm sse2x2 (492 MB/s)
[ 10.733000] md: raid6 personality registered for level 6
[ 10.733000] md: raid5 personality registered for level 5
[ 10.733000] md: raid4 personality registered for level 4
[ 10.733000] raid5: automatically using best checksumming function: pIII_sse
[ 10.738000] pIII_sse : 1128.000 MB/sec
[ 10.738000] raid5: using function: pIII_sse (1128.000 MB/sec)
[ 10.738000] md: multipath personality registered for level -4
[ 10.738000] md: faulty personality registered for level -5
[ 10.738000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 10.739000] EISA: Probing bus 0 at eisa.0
[ 10.739000] Cannot allocate resource for EISA slot 1
[ 10.739000] EISA: Detected 0 cards.
[ 10.739000] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 10.769000] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
[ 10.770000] specify port
[ 10.770000] snd_cs4231: probe of snd_cs4231.0 failed with error -22
[ 10.771000] ALSA device list:
[ 10.771000] No soundcards found.
[ 10.771000] TCP bic registered
[ 10.771000] NET: Registered protocol family 1
[ 10.771000] NET: Registered protocol family 17
[ 10.774000] Starting balanced_irq
[ 10.774000] Using IPI No-Shortcut mode
[ 10.774000] Suspend v2.2.9.3
[ 10.774000] Suspend2 Checksumming support registered.
[ 10.774000] Suspend2 Userspace Storage Manager support registered.
[ 10.774000] Suspend2 Userspace UI support registered.
[ 10.774000] Suspend2 Compressor support registered.
[ 10.774000] Suspend2 Encryptor support registered.
[ 10.774000] Suspend2 Block I/O support registered.
[ 10.774000] Suspend2 Swap Allocator support registered.
[ 10.774000] Suspend2 File Allocator support registered.
[ 10.775000] Time: tsc clocksource has been installed.
[ 10.775000] ACPI: (supports S0 S3 S4 S5)
[ 10.775000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 10.775000] Freeing unused kernel memory: 516k freed
[ 10.777000] Time: acpi_pm clocksource has been installed.
[ 11.676000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[ 11.676000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 11.676000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 11.677000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 11.677000] ehci_hcd 0000:00:1d.7: debug port 1
[ 11.677000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 11.677000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000
[ 11.681000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 11.681000] usb usb1: configuration #1 chosen from 1 choice
[ 11.682000] hub 1-0:1.0: USB hub found
[ 11.682000] hub 1-0:1.0: 8 ports detected
[ 11.897000] USB Universal Host Controller Interface driver v3.0
[ 11.898000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 11.898000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 11.898000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.898000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 11.898000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80
[ 11.898000] usb usb2: configuration #1 chosen from 1 choice
[ 11.899000] hub 2-0:1.0: USB hub found
[ 11.899000] hub 2-0:1.0: 2 ports detected
[ 11.989000] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 12.000000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 12.000000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 12.000000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 12.000000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 12.000000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60
[ 12.001000] usb usb3: configuration #1 chosen from 1 choice
[ 12.001000] hub 3-0:1.0: USB hub found
[ 12.001000] hub 3-0:1.0: 2 ports detected
[ 12.102000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
[ 12.102000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 12.102000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 12.102000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 12.102000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40
[ 12.103000] usb usb4: configuration #1 chosen from 1 choice
[ 12.103000] hub 4-0:1.0: USB hub found
[ 12.103000] hub 4-0:1.0: 2 ports detected
[ 12.106000] usb 1-3: configuration #1 chosen from 1 choice
[ 12.106000] scsi4 : SCSI emulation for USB Mass Storage devices
[ 12.107000] usb-storage: device found at 2
[ 12.107000] usb-storage: waiting for device to settle before scanning
[ 12.204000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
[ 12.204000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 12.204000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 12.204000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 12.204000] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20
[ 12.205000] usb usb5: configuration #1 chosen from 1 choice
[ 12.205000] hub 5-0:1.0: USB hub found
[ 12.205000] hub 5-0:1.0: 2 ports detected
[ 12.400000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 12.495000] sl811: driver sl811-hcd, 19 May 2005
[ 12.828000] Registering unionfs 20060916-2203
[ 12.828000] unionfs: debugging is not enabled
[ 12.930000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
[ 12.930000] Copyright (c) 1999-2006 Intel Corporation.
[ 17.107000] usb-storage: device scan complete
[ 17.108000] scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 17.108000] scsi 4:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 17.112000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 17.113000] sdb: Write Protect is off
[ 17.113000] sdb: Mode Sense: 03 00 00 00
[ 17.113000] sdb: assuming drive cache: write through
[ 17.115000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 17.116000] sdb: Write Protect is off
[ 17.116000] sdb: Mode Sense: 03 00 00 00
[ 17.116000] sdb: assuming drive cache: write through
[ 17.116000] sdb: sdb1
[ 17.120000] sd 4:0:0:0: Attached scsi removable disk sdb
[ 17.120000] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 17.123000] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 17.123000] sr 4:0:0:1: Attached scsi CD-ROM sr1
[ 17.123000] sr 4:0:0:1: Attached scsi generic sg3 type 5
[ 44.477000] Suspend2: SwapAllocator: Signature found.
[ 44.477000] Suspend2: Resuming enabled.
[ 44.478000] Suspend2: Normal swapspace found.
[ 44.507000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 44.507000] EXT3-fs: write access will be enabled during recovery.
[ 49.844000] kjournald starting. Commit interval 5 seconds
[ 49.845000] EXT3-fs: sda4: orphan cleanup on readonly fs
[ 49.845000] ext3_orphan_cleanup: deleting unreferenced inode 12189745
[ 49.845000] ext3_orphan_cleanup: deleting unreferenced inode 12189730
[ 49.845000] EXT3-fs: sda4: 2 orphan inodes deleted
[ 49.845000] EXT3-fs: recovery complete.
[ 49.863000] EXT3-fs: mounted filesystem with ordered data mode.
[ 55.481000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 55.496000] agpgart: Detected an Intel 945GM Chipset.
[ 55.534000] agpgart: AGP aperture is 256M @ 0x0
[ 55.548000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 55.570000] iTCO_vendor_support: vendor-support=0
[ 55.582000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 55.582000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 55.582000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 55.620000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 55.620000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 56.557000] input: PC Speaker as /class/input/input5
[ 56.589000] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 18
[ 56.718000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 56.718000] sdhci: Copyright(c) Pierre Ossman
[ 56.718000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
[ 56.718000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23
[ 56.718000] mmc0: SDHCI at 0xdf9fd400 irq 23 DMA
[ 56.729000] ieee80211_crypt: registered algorithm 'NULL'
[ 56.759000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 56.759000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 57.005000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpr
[ 57.005000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 57.005000] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 57.005000] PCI: Setting latency timer of device 0000:0b:00.0 to 64
[ 57.005000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 57.270000] b44.c:v1.01 (Jun 16, 2006)
[ 57.270000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 18
[ 57.273000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:17:48:39
[ 78.083000] EXT3 FS on sda4, internal journal
[ 81.752000] kjournald starting. Commit interval 5 seconds
[ 81.752000] EXT3 FS on sda1, internal journal
[ 81.752000] EXT3-fs: mounted filesystem with ordered data mode.
[ 81.805000] Adding 1534196k swap on /dev/sda3. Priority:-1 extents:1 across:1534196k
[ 100.697000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[ 110.902000] fbsplash: console 1 using theme 'sabayon'
[ 110.923000] fbsplash: switched splash state to 'on' on console 1
[ 110.971000] fbsplash: console 2 using theme 'sabayon'
[ 111.007000] fbsplash: switched splash state to 'on' on console 2
[ 111.041000] fbsplash: console 3 using theme 'sabayon'
[ 111.077000] fbsplash: switched splash state to 'on' on console 3
[ 111.116000] fbsplash: console 4 using theme 'sabayon'
[ 111.146000] fbsplash: switched splash state to 'on' on console 4
[ 111.184000] fbsplash: console 5 using theme 'sabayon'
[ 111.209000] fbsplash: switched splash state to 'on' on console 5
[ 111.232000] fbsplash: console 11 using theme 'sabayon'
[ 111.249000] fbsplash: switched splash state to 'on' on console 11
[ 114.126000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 114.133000] [fglrx] Maximum main memory to use for locked dma buffers: 922 MBytes.
[ 114.133000] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[ 114.148000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 116.283000] [fglrx] total GART = 130023424
[ 116.283000] [fglrx] free GART = 114032640
[ 116.283000] [fglrx] max single GART = 114032640
[ 116.283000] [fglrx] total LFB = 66977792
[ 116.283000] [fglrx] free LFB = 52588544
[ 116.283000] [fglrx] max single LFB = 52588544
[ 116.283000] [fglrx] total Inv = 0
[ 116.283000] [fglrx] free Inv = 0
[ 116.283000] [fglrx] max single Inv = 0
[ 116.283000] [fglrx] total TIM = 0
[ 176.533000] usb 1-3: USB disconnect, address 2
[ 178.739000] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 178.854000] usb 1-3: configuration #1 chosen from 1 choice
[ 178.854000] scsi5 : SCSI emulation for USB Mass Storage devices
[ 178.854000] usb-storage: device found at 3
[ 178.854000] usb-storage: waiting for device to settle before scanning
[ 183.854000] usb-storage: device scan complete
[ 183.854000] scsi 5:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 183.855000] scsi 5:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 183.856000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 183.857000] sdb: Write Protect is off
[ 183.857000] sdb: Mode Sense: 03 00 00 00
[ 183.857000] sdb: assuming drive cache: write through
[ 183.859000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 183.860000] sdb: Write Protect is off
[ 183.860000] sdb: Mode Sense: 03 00 00 00
[ 183.860000] sdb: assuming drive cache: write through
[ 183.860000] sdb: sdb1
[ 183.864000] sd 5:0:0:0: Attached scsi removable disk sdb
[ 183.864000] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 183.869000] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 183.869000] sr 5:0:0:1: Attached scsi CD-ROM sr1
[ 183.869000] sr 5:0:0:1: Attached scsi generic sg3 type 5
[ 411.272000] UDF-fs: No partition found (1)
[ 411.302000] UDF-fs: No partition found (1)
[ 411.390000] Unable to identify CD-ROM format.
[ 411.478000] Unable to identify CD-ROM format.
[ 411.484000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 422.683000] UDF-fs: Partition marked readonly; forcing readonly mount
[ 422.743000] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'Sabayon Linux x86', timestamp 2007/03/13 17:31 (1ed4)
[ 432.194000] usb 1-3: USB disconnect, address 3
[ 432.201000] scsi 5:0:0:0: rejecting I/O to dead device
[ 432.201000] scsi 5:0:0:0: rejecting I/O to dead device
[ 432.201000] sdb : READ CAPACITY failed.
[ 432.201000] sdb : status=0, message=00, host=1, driver=00
[ 432.201000] sdb : sense not available.
[ 432.201000] scsi 5:0:0:0: rejecting I/O to dead device
[ 432.201000] sdb: Write Protect is off
[ 432.201000] sdb: Mode Sense: 00 00 00 00
[ 432.201000] sdb: assuming drive cache: write through
[ 434.240000] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 434.354000] usb 1-3: configuration #1 chosen from 1 choice
[ 434.355000] scsi6 : SCSI emulation for USB Mass Storage devices
[ 434.355000] usb-storage: device found at 4
[ 434.355000] usb-storage: waiting for device to settle before scanning
[ 439.355000] usb-storage: device scan complete
[ 439.355000] scsi 6:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 439.356000] scsi 6:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 439.358000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 439.358000] sdb: Write Protect is off
[ 439.358000] sdb: Mode Sense: 03 00 00 00
[ 439.358000] sdb: assuming drive cache: write through
[ 439.361000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 439.361000] sdb: Write Protect is off
[ 439.361000] sdb: Mode Sense: 03 00 00 00
[ 439.361000] sdb: assuming drive cache: write through
[ 439.361000] sdb: sdb1
[ 439.365000] sd 6:0:0:0: Attached scsi removable disk sdb
[ 439.366000] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 439.370000] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 439.371000] sr 6:0:0:1: Attached scsi CD-ROM sr1
[ 439.371000] sr 6:0:0:1: Attached scsi generic sg3 type 5
[ 444.617000] UDF-fs: No partition found (1)
[ 444.648000] UDF-fs: No partition found (1)
[ 444.740000] Unable to identify CD-ROM format.
[ 444.848000] Unable to identify CD-ROM format.
[ 444.863000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 1150.534000] usb 1-3: USB disconnect, address 4
[ 1152.490000] usb 1-3: new high speed USB device using ehci_hcd and address 5
[ 1152.605000] usb 1-3: configuration #1 chosen from 1 choice
[ 1152.605000] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1152.605000] usb-storage: device found at 5
[ 1152.605000] usb-storage: waiting for device to settle before scanning
[ 1157.034000] usb 1-3: USB disconnect, address 5
[ 1158.490000] usb 1-3: new high speed USB device using ehci_hcd and address 6
[ 1158.605000] usb 1-3: configuration #1 chosen from 1 choice
[ 1158.605000] scsi8 : SCSI emulation for USB Mass Storage devices
[ 1158.605000] usb-storage: device found at 6
[ 1158.605000] usb-storage: waiting for device to settle before scanning
[ 1163.605000] usb-storage: device scan complete
[ 1163.605000] scsi 8:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 1163.606000] scsi 8:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 1163.607000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 1163.608000] sdb: Write Protect is off
[ 1163.608000] sdb: Mode Sense: 03 00 00 00
[ 1163.608000] sdb: assuming drive cache: write through
[ 1163.610000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 1163.611000] sdb: Write Protect is off
[ 1163.611000] sdb: Mode Sense: 03 00 00 00
[ 1163.611000] sdb: assuming drive cache: write through
[ 1163.611000] sdb: sdb1
[ 1163.615000] sd 8:0:0:0: Attached scsi removable disk sdb
[ 1163.615000] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 1163.621000] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 1163.621000] sr 8:0:0:1: Attached scsi CD-ROM sr1
[ 1163.621000] sr 8:0:0:1: Attached scsi generic sg3 type 5
[ 1168.865000] UDF-fs: No partition found (1)
[ 1168.894000] UDF-fs: No partition found (1)
[ 1169.033000] Unable to identify CD-ROM format.
[ 1169.134000] Unable to identify CD-ROM format.
[ 1169.139000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 1260.831000] usb 1-3: USB disconnect, address 6
[ 1263.240000] usb 1-3: new high speed USB device using ehci_hcd and address 7
[ 1263.355000] usb 1-3: configuration #1 chosen from 1 choice
[ 1263.355000] scsi9 : SCSI emulation for USB Mass Storage devices
[ 1263.355000] usb-storage: device found at 7
[ 1263.355000] usb-storage: waiting for device to settle before scanning
[ 1268.355000] usb-storage: device scan complete
[ 1268.356000] scsi 9:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 1268.357000] scsi 9:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 1268.362000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 1268.363000] sdb: Write Protect is off
[ 1268.363000] sdb: Mode Sense: 03 00 00 00
[ 1268.363000] sdb: assuming drive cache: write through
[ 1268.367000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 1268.368000] sdb: Write Protect is off
[ 1268.368000] sdb: Mode Sense: 03 00 00 00
[ 1268.368000] sdb: assuming drive cache: write through
[ 1268.368000] sdb: sdb1
[ 1268.372000] sd 9:0:0:0: Attached scsi removable disk sdb
[ 1268.372000] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 1268.379000] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 1268.379000] sr 9:0:0:1: Attached scsi CD-ROM sr1
[ 1268.379000] sr 9:0:0:1: Attached scsi generic sg3 type 5
[ 1273.880000] UDF-fs: No partition found (1)
[ 1273.914000] UDF-fs: No partition found (1)
[ 1274.003000] Unable to identify CD-ROM format.
[ 1274.094000] Unable to identify CD-ROM format.
[ 1274.100000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 1325.049000] VFS: busy inodes on changed media.
[ 1325.237000] VFS: busy inodes on changed media.
[ 1325.281000] VFS: busy inodes on changed media.
[ 1325.304000] VFS: busy inodes on changed media.
[ 1325.329000] VFS: busy inodes on changed media.
[ 1325.423000] sr 3:0:0:0: Device not ready: <6>: Current: sense key=0x2
[ 1325.423000] ASC=0x3a ASCQ=0x2
[ 1325.423000] end_request: I/O error, dev sr0, sector 1040
[ 1325.426000] sr 3:0:0:0: Device not ready: <6>: Current: sense key=0x2
[ 1325.426000] ASC=0x3a ASCQ=0x2
[ 1325.426000] end_request: I/O error, dev sr0, sector 1040
[ 1326.815000] VFS: busy inodes on changed media.
[ 1326.839000] VFS: busy inodes on changed media.
[ 1343.434000] VFS: busy inodes on changed media.
[ 1343.443000] VFS: busy inodes on changed media.
[ 1474.284000] usb 1-3: USB disconnect, address 7
[ 1577.337000] usb 1-1: new high speed USB device using ehci_hcd and address 8
[ 1577.452000] usb 1-1: configuration #1 chosen from 1 choice
[ 1577.452000] scsi10 : SCSI emulation for USB Mass Storage devices
[ 1577.452000] usb-storage: device found at 8
[ 1577.452000] usb-storage: waiting for device to settle before scanning
[ 1582.452000] usb-storage: device scan complete
[ 1582.452000] scsi 10:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 1582.453000] scsi 10:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2
[ 1582.454000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 1582.455000] sdb: Write Protect is off
[ 1582.455000] sdb: Mode Sense: 03 00 00 00
[ 1582.455000] sdb: assuming drive cache: write through
[ 1582.457000] SCSI device sdb: 1994385 512-byte hdwr sectors (1021 MB)
[ 1582.457000] sdb: Write Protect is off
[ 1582.457000] sdb: Mode Sense: 03 00 00 00
[ 1582.457000] sdb: assuming drive cache: write through
[ 1582.457000] sdb: sdb1
[ 1582.461000] sd 10:0:0:0: Attached scsi removable disk sdb
[ 1582.462000] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 1582.466000] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 1582.466000] sr 10:0:0:1: Attached scsi CD-ROM sr1
[ 1582.467000] sr 10:0:0:1: Attached scsi generic sg3 type 5
[ 1634.186000] UDF-fs: No partition found (1)
[ 1634.215000] UDF-fs: No partition found (1)
[ 1634.306000] Unable to identify CD-ROM format.
[ 1634.396000] Unable to identify CD-ROM format.
[ 1634.400000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!