Mine

Loading onboard drivers: ebus
/pci@8,700000/ebus@5: flashprom i2c bbc power i2c beep rtc gpio pmc parallel rsc-control rsc-console serial
/pci@8,700000/ebus@5/i2c@1,2e: nvram idprom dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru
/pci@8,700000/ebus@5/i2c@1,30: cpu-fru temperature fan-control motherboard-fru ioexp ioexp ioexp fcal-backplane remote-syste
screen not found.
keyboard not found.
Keyboard not present.  Using ttya for input and output.
System Reset: (SPOR) (PLL)
Probing system devices
/: gptwo at 0,0 SUNW,UltraSPARC-III+ (900 MHz @ 6:1, 8 MB) memory-controller
/: gptwo at 1,0 Nothing there
/: gptwo at 8,0 pci pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device SUNW,fru-device
Loading onboard drivers: ebus
/pci@8,700000/ebus@5: flashprom i2c bbc power i2c beep rtc gpio pmc parallel rsc-control rsc-console serial
/pci@8,700000/ebus@5/i2c@1,2e: nvram idprom dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru
/pci@8,700000/ebus@5/i2c@1,30: cpu-fru temperature fan-control motherboard-fru ioexp ioexp ioexp fcal-backplane remote-syste


Sun Fire 280R (UltraSPARC-III+) , No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.16.4, 2048 MB memory installed, Serial #50390292.
Ethernet address 0:3:ba:0:e5:14, Host ID: 8300e514.




ok