rendered paste body$ dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2394.04-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2950414336 (2813 MB)
avail memory = 2876715008 (2743 MB)
ACPI APIC Table: <->
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 1.1> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL B8K > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 1.4 (no driver attached)
pci0: <memory, RAM> at device 1.5 (no driver attached)
pci0: <memory, RAM> at device 1.6 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 7900 GS> port 0xdc80-0xdcff mem 0xdd000000-0xddffffff,0xb0000000-0xbfffffff,0xde000000-0xdeffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xdbff0000-0xdbffffff irq 18 at device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:19:b9:32:53:27
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x4f00-0x4fff at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdfff8000-0xdfff8fff irq 21 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfff7f00-0xdfff7fff irq 22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: waiting for BIOS to give up control
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
uhub2: vendor 0x0424 product 0x2502, class 9/0, rev 2.00/0.01, addr 2
uhub2: single transaction translator
uhub2: 2 ports with 1 removable, self powered
uhub3: vendor 0x0424 product 0x2602, class 9/0, rev 2.00/0.00, addr 3
uhub3: multiple transaction translators
uhub3: 4 ports with 3 removable, self powered
umass0: Generic Flash Card Reader, rev 2.00/4.44, addr 4
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xecf0-0xecff at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfecf mem 0xdfff9000-0xdfff9fff irq 23 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xfe40-0xfe47,0xfe50-0xfe53,0xfe60-0xfe67,0xfe70-0xfe73,0xfed0-0xfedf mem 0xdfffa000-0xdfffafff irq 20 at device 14.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff mem 0xdfffb000-0xdfffbfff irq 21 at device 14.2 on pci0
ata6: <ATA channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
pcib4: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ath0: <Atheros 5212> mem 0xdaff0000-0xdaffffff irq 16 at device 4.0 on pci4
ath0: Ethernet address: 00:19:5b:3b:2d:cc
ath0: mac 7.8 phy 4.5 radio 5.6
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xdafeb800-0xdafebfff,0xdafec000-0xdafeffff irq 18 at device 10.0 on pci4
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 80:b9:19:00:27:53:32:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 82:b9:19:53:32:00
fwe0: Ethernet address: 82:b9:19:53:32:00
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcm0: <NVidia MCP55 High Definition Audio Controller> mem 0xdfffc000-0xdfffffff irq 22 at device 15.1 on pci0
pcib5: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pci6: <ACPI PCI bus> on pcib6
nvidia1: <GeForce 7900 GS> port 0xcc80-0xccff mem 0xd8000000-0xd8ffffff,0xc0000000-0xcfffffff,0xd9000000-0xd9ffffff irq 16 at device 0.0 on pci6
nvidia1: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd07ff,0xd0800-0xd3fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ulpt0: Dell Inc. Dell Laser Printer 1110, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ugen0: Philips eHome Infrared Transceiver, rev 1.10/0.00, addr 3
ums0: vendor 0x0461 USB Optical Mouse, rev 2.00/2.00, addr 4, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
ad4: 238418MB <Seagate ST3250820AS 3.ADG> at ata2-master SATA300
pcm0: <HDA Codec: Sigmatel STAC9227>
pcm0: <HDA Driver Revision: 20070505_0044>
ukbd0: Dell Dell USB Keyboard, rev 1.10/3.01, addr 5, iclass 3/1
kbd2 at ukbd0
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic Flash HS-CF 4.44> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic Flash HS-COMBO 4.44> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers