rendered paste bodysd 2:0:0:0: rejecting I/O to device being removed
scsi 2:0:0:0: rejecting I/O to dead device
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
video device notify
usb 1-6.1: USB disconnect, address 3
usb 1-6.1: new low speed USB device using ehci_hcd and address 5
usb 1-6.1: new device found, idVendor=062a, idProduct=0000
usb 1-6.1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-6.1: configuration #1 chosen from 1 choice
input: HID 062a:0000 as /class/input/input4
input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.7-6.1
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
/dev/vmmon[8691]: Module vmmon: unloaded
bridge-eth0: down
bridge-eth0: detached
/dev/vmmon[9433]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[9433]: Module vmmon: initialized
/dev/vmmon[9439]: Module vmmon: unloaded
/dev/vmmon[9833]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[9833]: Module vmmon: initialized
/dev/vmnet: open called by PID 9868 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 9880 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 9895 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 9915 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 9908 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 9930 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present
suse-ytoox:/home/ytoox # clear
suse-ytoox:/home/ytoox # dmesg
Linux version 2.6.18.8-0.3-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Sat May 12 13:05:00 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f670000 (usable)
BIOS-e820: 000000007f670000 - 000000007f700000 (ACPI NVS)
BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1142MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6a10
On node 0 totalpages: 521840
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 292464 pages, LIFO batch:31
DMI present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v002 TOSINV ) @ 0x000f6960
ACPI: XSDT (v001 TOSINV TOSINV00 0x06040000 INV 0x00000000) @ 0x7f678451
ACPI: FADT (v003 TOSINV TOSINV00 0x06040000 ALAN 0x00000001) @ 0x7f681bf8
ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f681cec
ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f681d54
ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f681d8c
ACPI: TCPA (v001 PTLTD CALISTGA 0x06040000 PTL 0x00000001) @ 0x7f681dc8
ACPI: MADT (v001 TOSINV APIC 0x06040000 INV 0x00000000) @ 0x7f681dfa
ACPI: SLIC (v001 TOSINV TOSINV00 0x06040000 INV 0x00000000) @ 0x7f681e62
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7f681fd8
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x7f679b9b
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x7f679509
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7f678a69
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7f6789c3
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6784dd
ACPI: DSDT (v002 TOSINV CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: 2 duplicate APIC table ignored.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Detected 1596.004 MHz processor.
Built 1 zonelists. Total pages: 521840
Kernel command line: root=/dev/sda2 vga=0x314 resume=/dev/sda5 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2062796k/2087360k available (1699k kernel code, 23380k reserved, 974k data, 196k init, 1169856k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay using timer specific routine.. 3246.25 BogoMIPS (lpj=6492512)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000940 0000e39d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 2864k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3192.08 BogoMIPS (lpj=6384162)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000940 0000e39d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06
Total of 2 processors activated (6438.33 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=89
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfd604, last bus=7
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #08 (-#0b) is hidden behind transparent bridge #07 (-#07) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 22) interrupt mode.
ACPI: Power Resource [FN00] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 2000-2fff
MEM window: f0700000-f07fffff
PREFETCH window: f0200000-f03fffff
PCI: Bridge: 0000:00:1c.2
IO window: 3000-3fff
MEM window: f0800000-f08fffff
PREFETCH window: f0400000-f05fffff
PCI: Bus 8, cardbus bridge: 0000:07:06.0
IO window: 00004400-000044ff
IO window: 00004800-000048ff
PREFETCH window: 88000000-89ffffff
MEM window: 8a000000-8bffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: f0900000-f09fffff
PREFETCH window: 88000000-89ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:07:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 185
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1178977369.364:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 7872k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82985 bytes,<6>...found (800x600, 49016 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input1
SCSI subsystem initialized
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
Time: hpet clocksource has been installed.
ACPI: Thermal Zone [TZ00] (61 C)
ACPI: Invalid passive threshold
ACPI: Transitioning device [FAN0] to D0
ACPI: Transitioning device [FAN0] to D0
ACPI: Unable to turn cooling device [dffe6fcc] 'on'
ACPI: Thermal Zone [TZ01] (64 C)
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00ac7
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
scsi0 : ata_piix
ata1.00: ATA-7, max UDMA/100, 312581808 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : ata_piix
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
synaptics: Toshiba Satellite A105 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
Vendor: ATA Model: TOSHIBA MK1637GS Rev: DL02
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda2 sda3 < sda5 > sda4
sd 0:0:0:0: Attached scsi disk sda
Vendor: MATSHITA Model: DVD-RAM UJ-841S Rev: 1.60
Type: CD-ROM ANSI SCSI revision: 05
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ACPI: Transitioning device [FAN0] to D3
ACPI: Transitioning device [FAN0] to D3
ACPI: Fan [FAN0] (off)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 233, io mem 0xf0d44000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.8-0.3-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 233, io base 0x00001820
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18.8-0.3-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
intel_rng: FWH not detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 225, io base 0x00001840
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.18.8-0.3-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-6: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001860
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.18.8-0.3-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-6: new device found, idVendor=0409, idProduct=0059
usb 1-6: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-6: configuration #1 chosen from 1 choice
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 177, io base 0x00001880
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.18.8-0.3-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
ieee1394: Initialized config rom entry `ip1394'
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
Yenta: ISA IRQ mask 0x0cf8, PCI irq 185
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xf0900000 - 0xf09fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0)
ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 185
usb 1-6.1: new low speed USB device using ehci_hcd and address 3
mmc0: SDHCI at 0xf0906800 irq 185 DMA
ACPI: PCI Interrupt 0000:07:08.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58
GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ieee80211_crypt: registered algorithm 'NULL'
e100: eth0: e100_probe: addr 0xf0905000, irq 50, MAC addr 00:A0:D1:59:93:1D
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
usb 1-6.1: new device found, idVendor=062a, idProduct=0000
usb 1-6.1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-6.1: configuration #1 chosen from 1 choice
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0d
ipw3945: Copyright(c) 2003-2006 Intel Corporation
usbcore: registered new driver hiddev
input: HID 062a:0000 as /class/input/input3
input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.7-6.1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x400-0x407 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2121: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2123: hp=0x0, dig_out=0x0, din_in=0x0
ALSA sound/pci/hda/hda_codec.c:2131: inputs: mic=0xd, fmic=0x0, line=0x0, fline=0x0, cd=0x11, aux=0x0
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 169
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[f0906000-f09067ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:05:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k
ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.27 [Flags: R/W MODULE].
AppArmor: AppArmor initialized
audit(1178977384.730:2): AppArmor initialized
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
audit(1178991800.987:3): audit_pid=3221 old=0 by auid=4294967295
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[3479]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[3479]: Module vmmon: initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
/dev/vmnet: open called by PID 3547 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: peer interface eth0 not found, will wait for it to come up
bridge-eth0: attached
/dev/vmnet: open called by PID 3568 (vmnet-netifup)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 3567 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 3563 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
bootsplash: status on console 0 changed to on
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
bridge-eth0: enabling the bridge
bridge-eth0: up
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
/dev/vmnet: open called by PID 3750 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 3751 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
NET: Registered protocol family 17
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
[drm] Initialized i915 1.5.0 20060119 on minor 0
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
bridge-eth0: disabling the bridge
bridge-eth0: down
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
bridge-eth0: enabling the bridge
bridge-eth0: up
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
toshiba: not a supported Toshiba laptop
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
set_level status: 0
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
video bus notify
video bus notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
video device notify
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
set_level status: 0
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
video device notify
video device notify
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
video device notify
video bus notify
video bus notify
video bus notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
usb 1-3: new high speed USB device using ehci_hcd and address 4
usb 1-3: new device found, idVendor=041e, idProduct=4120
usb 1-3: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: MuVo TX FM
usb 1-3: Manufacturer: CREATIVE
usb 1-3: SerialNumber: 0002F9BB3F23C314
usb 1-3: configuration #1 chosen from 1 choice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Vendor: CREATIVE Model: MuVo TX FM Rev: 1211
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sdb: 124672 2048-byte hdwr sectors (255 MB)
sdb: Write Protect is off
sdb: Mode Sense: 38 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 124672 2048-byte hdwr sectors (255 MB)
sdb: Write Protect is off
sdb: Mode Sense: 38 00 00 00
sdb: assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: Attached scsi removable disk sdb
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 1-3: USB disconnect, address 4
sd 2:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sdb1, logical block 1
lost page write due to I/O error on sdb1
sd 2:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sdb1, logical block 30
lost page write due to I/O error on sdb1
sd 2:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sdb1, logical block 38
lost page write due to I/O error on sdb1
sd 2:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sdb1, logical block 244
lost page write due to I/O error on sdb1
sd 2:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sdb1, logical block 273
lost page write due to I/O error on sdb1
sd 2:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sdb1, logical block 281
lost page write due to I/O error on sdb1
sd 2:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sdb1, logical block 488
lost page write due to I/O error on sdb1
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
sd 2:0:0:0: rejecting I/O to device being removed
scsi 2:0:0:0: rejecting I/O to dead device
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
video device notify
usb 1-6.1: USB disconnect, address 3
usb 1-6.1: new low speed USB device using ehci_hcd and address 5
usb 1-6.1: new device found, idVendor=062a, idProduct=0000
usb 1-6.1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-6.1: configuration #1 chosen from 1 choice
input: HID 062a:0000 as /class/input/input4
input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.7-6.1
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
video device notify
set_level status: 0
/dev/vmmon[8691]: Module vmmon: unloaded
bridge-eth0: down
bridge-eth0: detached
/dev/vmmon[9433]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[9433]: Module vmmon: initialized
/dev/vmmon[9439]: Module vmmon: unloaded
/dev/vmmon[9833]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[9833]: Module vmmon: initialized
/dev/vmnet: open called by PID 9868 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 9880 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 9895 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 9915 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 9908 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 9930 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present
suse-ytoox:/home/ytoox #