rendered paste body[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001bed0000 end: 000000001bfd0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001bfd0000 size: 000000000000e000 end: 000000001bfde000 type: 3
[ 0.000000] copy_e820_map() start: 000000001bfde000 size: 0000000000022000 end: 000000001c000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfd0000 (usable)
[ 0.000000] BIOS-e820: 000000001bfd0000 - 000000001bfde000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bfde000 - 000000001c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 114640) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114640
[ 0.000000] HighMem 114640 -> 114640
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114640
[ 0.000000] On node 0 totalpages: 114640
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 863 pages used for memmap
[ 0.000000] Normal zone: 109681 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f8510
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x07000606 MSFT 0x00000097) @ 0x1bfd0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x07000606 MSFT 0x00000097) @ 0x1bfd0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x07000606 MSFT 0x00000097) @ 0x1bfd0390
[ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x07000606 MSFT 0x00000097) @ 0x1bfd0400
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x07000606 MSFT 0x00000097) @ 0x1bfde040
[ 0.000000] ACPI: DSDT (v001 1ADIF 1ADIF006 0x00000006 INTL 0x20051117) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000)
[ 0.000000] Detected 2210.122 MHz processor.
[ 29.011765] Built 1 zonelists. Total pages: 113745
[ 29.011768] Kernel command line: root=UUID=b66a2d70-f4ec-4a2d-8fd2-b1fd795d2e20 ro quiet splash
[ 29.011885] mapped APIC to ffffd000 (fee00000)
[ 29.011887] mapped IOAPIC to ffffc000 (fec00000)
[ 29.011890] Enabling fast FPU save and restore... done.
[ 29.011892] Enabling unmasked SIMD FPU exception support... done.
[ 29.011899] Initializing CPU#0
[ 29.011948] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 29.012008] spurious 8259A interrupt: IRQ7.
[ 29.014734] Console: colour VGA+ 80x25
[ 29.015020] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 29.015218] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 29.022426] Memory: 443328k/458560k available (1992k kernel code, 14680k reserved, 893k data, 328k init, 0k highmem)
[ 29.022435] virtual kernel memory layout:
[ 29.022435] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 29.022437] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 29.022438] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 29.022439] lowmem : 0xc0000000 - 0xdbfd0000 ( 447 MB)
[ 29.022440] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 29.022441] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 29.022442] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 29.022444] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 29.099896] Calibrating delay using timer specific routine.. 4424.04 BogoMIPS (lpj=8848096)
[ 29.099929] Security Framework v1.0.0 initialized
[ 29.099934] SELinux: Disabled at boot.
[ 29.099947] Mount-cache hash table entries: 512
[ 29.100050] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d
[ 29.100057] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 29.100059] CPU: L2 Cache: 512K (64 bytes/line)
[ 29.100061] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d
[ 29.100069] Compat vDSO mapped to ffffe000.
[ 29.100072] Remapping vsyscall page to ffffe000
[ 29.100080] Checking 'hlt' instruction... OK.
[ 29.115988] SMP alternatives: switching to UP code
[ 29.116131] Freeing SMP alternatives: 11k freed
[ 29.116304] Early unpacking initramfs... done
[ 29.374179] ACPI: Core revision 20060707
[ 29.374658] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 29.376694] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[ 29.376709] Total of 1 processors activated (4424.04 BogoMIPS).
[ 29.376993] ENABLING IO-APIC IRQs
[ 29.377238] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 29.417135] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 29.417165] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 29.417166] ...trying to set up timer as Virtual Wire IRQ... failed.
[ 29.456859] ...trying to set up timer as ExtINT IRQ... works.
[ 29.703536] Brought up 1 CPUs
[ 29.703747] Booting paravirtualized kernel on bare hardware
[ 29.703804] Time: 20:33:19 Date: 04/11/107
[ 29.703830] NET: Registered protocol family 16
[ 29.703904] EISA bus registered
[ 29.703908] ACPI: bus type pci registered
[ 29.704658] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 29.704660] PCI: Using configuration type 1
[ 29.704661] Setting up standard PCI resources
[ 29.715298] ACPI: Interpreter enabled
[ 29.715300] ACPI: Using IOAPIC for interrupt routing
[ 29.715501] Error attaching device data
[ 29.715505] Error attaching device data
[ 29.715750] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 29.715754] PCI: Probing PCI hardware (bus 00)
[ 29.716107] Boot video device is 0000:00:05.0
[ 29.716868] PCI: Transparent bridge - 0000:00:10.0
[ 29.716895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 29.728820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 29.729066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 29.729316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 29.733824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 29.734920] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
[ 29.735290] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 29.735946] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[ 29.736315] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
[ 29.736687] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 29.737053] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 29.737418] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
[ 29.737786] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 29.738153] ACPI: PCI Interrupt Link [LUB0] (IRQs 21) *11
[ 29.738519] ACPI: PCI Interrupt Link [LUB2] (IRQs 23) *10
[ 29.738890] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[ 29.739255] ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *11
[ 29.739632] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 29.740001] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 29.740370] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
[ 29.740738] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 29.741117] ACPI: PCI Interrupt Link [LSA0] (IRQs 22) *5
[ 29.741484] ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *5
[ 29.741918] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 29.742015] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.742024] pnp: PnP ACPI init
[ 29.747359] pnp: PnP ACPI: found 15 devices
[ 29.747363] PnPBIOS: Disabled by ACPI PNP
[ 29.747409] PCI: Using ACPI for IRQ routing
[ 29.747412] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 29.759535] NET: Registered protocol family 8
[ 29.759536] NET: Registered protocol family 20
[ 29.760750] pnp: 00:0c: ioport range 0xa00-0xa0f has been reserved
[ 29.760752] pnp: 00:0c: ioport range 0xa10-0xa1f has been reserved
[ 29.760934] PCI: Bridge: 0000:00:02.0
[ 29.760935] IO window: disabled.
[ 29.760938] MEM window: disabled.
[ 29.760939] PREFETCH window: disabled.
[ 29.760942] PCI: Bridge: 0000:00:03.0
[ 29.760943] IO window: disabled.
[ 29.760945] MEM window: disabled.
[ 29.760946] PREFETCH window: disabled.
[ 29.760948] PCI: Bridge: 0000:00:04.0
[ 29.760950] IO window: disabled.
[ 29.760951] MEM window: disabled.
[ 29.760953] PREFETCH window: disabled.
[ 29.760956] PCI: Bridge: 0000:00:10.0
[ 29.760958] IO window: e000-efff
[ 29.760961] MEM window: fb000000-febfffff
[ 29.760963] PREFETCH window: disabled.
[ 29.760974] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 29.760979] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 29.760984] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 29.760990] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 29.761014] NET: Registered protocol family 2
[ 29.799510] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 29.799864] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 29.800000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 29.800065] TCP: Hash tables configured (established 16384 bind 8192)
[ 29.800067] TCP reno registered
[ 29.811517] checking if image is initramfs... it is
[ 30.324353] Freeing initrd memory: 7007k freed
[ 30.324721] audit: initializing netlink socket (disabled)
[ 30.324733] audit(1178915599.324:1): initialized
[ 30.324834] VFS: Disk quotas dquot_6.5.1
[ 30.324849] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 30.324893] io scheduler noop registered
[ 30.324895] io scheduler anticipatory registered
[ 30.324897] io scheduler deadline registered
[ 30.324906] io scheduler cfq registered (default)
[ 30.758989] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 30.759007] assign_interrupt_mode Found MSI capability
[ 30.759009] Allocate Port Service[0000:00:02.0:pcie00]
[ 30.759058] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 30.759075] assign_interrupt_mode Found MSI capability
[ 30.759077] Allocate Port Service[0000:00:03.0:pcie00]
[ 30.759124] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 30.759141] assign_interrupt_mode Found MSI capability
[ 30.759143] Allocate Port Service[0000:00:04.0:pcie00]
[ 30.759231] isapnp: Scanning for PnP cards...
[ 31.112106] isapnp: No Plug & Play device found
[ 31.130739] Real Time Clock Driver v1.12ac
[ 31.130781] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 31.130899] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.131463] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.131667] mice: PS/2 mouse device common for all mice
[ 31.132058] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 31.132241] input: Macintosh mouse button emulation as /class/input/input0
[ 31.132264] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 31.132267] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 31.132418] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 31.135385] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 31.135390] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 31.135494] EISA: Probing bus 0 at eisa.0
[ 31.135503] Cannot allocate resource for EISA slot 2
[ 31.135507] Cannot allocate resource for EISA slot 4
[ 31.135509] Cannot allocate resource for EISA slot 5
[ 31.135510] Cannot allocate resource for EISA slot 6
[ 31.135516] EISA: Detected 0 cards.
[ 31.165583] TCP cubic registered
[ 31.165589] NET: Registered protocol family 1
[ 31.165608] Using IPI No-Shortcut mode
[ 31.165656] ACPI: (supports S0 S1 S3 S4 S5)
[ 31.165695] Magic number: 7:969:598
[ 31.165769] hash matches device ptyd2
[ 31.166153] Freeing unused kernel memory: 328k freed
[ 31.166518] Time: tsc clocksource has been installed.
[ 32.350259] Capability LSM initialized
[ 32.378935] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 32.809701] usbcore: registered new interface driver usbfs
[ 32.809723] usbcore: registered new interface driver hub
[ 32.809740] usbcore: registered new device driver usb
[ 32.810274] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 32.810677] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 32.810689] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 16
[ 32.810701] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 32.810704] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 32.810874] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 32.810891] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xf8fde000
[ 32.879993] usb usb1: configuration #1 chosen from 1 choice
[ 32.880016] hub 1-0:1.0: USB hub found
[ 32.880027] hub 1-0:1.0: 8 ports detected
[ 32.931215] ieee1394: Initialized config rom entry `ip1394'
[ 32.958146] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 32.985529] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 32.985552] NFORCE-MCP51: chipset revision 161
[ 32.985554] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 32.985560] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
[ 32.985568] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[ 32.985578] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
[ 32.985584] Probing IDE interface ide0...
[ 33.281179] hda: ST3802110A, ATA DISK drive
[ 33.301063] usb 1-4: new low speed USB device using ohci_hcd and address 2
[ 33.497503] usb 1-4: configuration #1 chosen from 1 choice
[ 33.804727] usb 1-6: new low speed USB device using ohci_hcd and address 3
[ 33.960786] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 33.961985] Probing IDE interface ide1...
[ 34.022124] usb 1-6: configuration #1 chosen from 1 choice
[ 34.332367] usb 1-7: new low speed USB device using ohci_hcd and address 4
[ 34.539762] usb 1-7: configuration #1 chosen from 1 choice
[ 34.704220] hdc: _NEC DVD_RW ND-4571A, ATAPI CD/DVD-ROM drive
[ 34.848019] usb 1-8: new low speed USB device using ohci_hcd and address 5
[ 35.054382] usb 1-8: configuration #1 chosen from 1 choice
[ 35.057430] usbcore: registered new interface driver hiddev
[ 35.065426] input: HID 0b38:0010 as /class/input/input1
[ 35.065442] input: USB HID v1.10 Keyboard [HID 0b38:0010] on usb-0000:00:0b.0-6
[ 35.079347] input: HID 0b38:0010 as /class/input/input2
[ 35.079352] input: USB HID v1.10 Device [HID 0b38:0010] on usb-0000:00:0b.0-6
[ 35.084349] input: Microsoft Microsoft Digital Media Pro Keyboard as /class/input/input3
[ 35.084354] input: USB HID v1.11 Keyboard [Microsoft Microsoft Digital Media Pro Keyboard] on usb-0000:00:0b.0-7
[ 35.097371] input: Microsoft Microsoft Digital Media Pro Keyboard as /class/input/input4
[ 35.097376] input: USB HID v1.11 Device [Microsoft Microsoft Digital Media Pro Keyboard] on usb-0000:00:0b.0-7
[ 35.102326] input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input5
[ 35.102341] input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-8
[ 35.102349] usbcore: registered new interface driver usbhid
[ 35.102353] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 35.379989] ide1 at 0x170-0x177,0x376 on irq 15
[ 35.385534] SCSI subsystem initialized
[ 35.389417] libata version 2.20 loaded.
[ 35.392254] sata_nv 0000:00:0e.0: version 3.3
[ 35.392641] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[ 35.392653] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 22 (level, low) -> IRQ 17
[ 35.392672] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 35.392724] ata1: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001d482 bmdma 0x0001d000 irq 17
[ 35.392748] ata2: SATA max UDMA/133 cmd 0x0001d400 ctl 0x0001d082 bmdma 0x0001d008 irq 17
[ 35.392761] scsi0 : sata_nv
[ 35.867349] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 35.879569] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 35.879573] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
[ 35.879576] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 35.907537] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 35.907540] ata1.00: configured for UDMA/133
[ 35.907550] scsi1 : sata_nv
[ 36.223090] ata2: SATA link down (SStatus 0 SControl 300)
[ 36.233450] ATA: abnormal status 0x7F on port 0x0001d407
[ 36.233560] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 36.234508] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 36.234519] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 18
[ 36.234541] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 36.234581] ata3: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 18
[ 36.234605] ata4: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 18
[ 36.234618] scsi2 : sata_nv
[ 36.546871] ata3: SATA link down (SStatus 0 SControl 300)
[ 36.557232] ATA: abnormal status 0x7F on port 0x0001cc07
[ 36.557252] scsi3 : sata_nv
[ 36.870651] ata4: SATA link down (SStatus 0 SControl 300)
[ 36.881012] ATA: abnormal status 0x7F on port 0x0001c807
[ 36.882761] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 36.882766] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 18
[ 36.882777] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 36.882780] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 36.882962] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 36.882993] ehci_hcd 0000:00:0b.1: debug port 1
[ 36.882997] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 36.883005] ehci_hcd 0000:00:0b.1: irq 18, io mem 0xf8fdfc00
[ 36.883012] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 36.883047] usb 1-4: USB disconnect, address 2
[ 36.886007] usb usb2: configuration #1 chosen from 1 choice
[ 36.886131] hub 2-0:1.0: USB hub found
[ 36.886141] hub 2-0:1.0: 8 ports detected
[ 36.893571] hda: max request size: 512KiB
[ 36.907328] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 36.907360] sda: Write Protect is off
[ 36.907362] sda: Mode Sense: 00 3a 00 00
[ 36.907374] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.907429] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 36.907435] sda: Write Protect is off
[ 36.907437] sda: Mode Sense: 00 3a 00 00
[ 36.907447] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.907450] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 36.924345] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
[ 36.932329] sd 0:0:0:0: Attached scsi disk sda
[ 36.935823] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 36.948800] hda: cache flushes supported
[ 36.948844] hda: hda1 < hda5 >
[ 36.981223] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 36.981231] Uniform CD-ROM driver Revision: 3.20
[ 36.991212] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 36.991226] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 37.041060] usb 1-6: USB disconnect, address 3
[ 37.042389] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[febef800-febeffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 37.045864] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 37.045874] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 37.045879] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 37.045886] forcedeth: using HIGHDMA
[ 37.170526] usb 1-7: USB disconnect, address 4
[ 37.185979] Attempting manual resume
[ 37.185983] swsusp: Resume From Partition 8:3
[ 37.185984] PM: Checking swsusp image.
[ 37.186206] PM: Resume from disk failed.
[ 37.210367] kjournald starting. Commit interval 5 seconds
[ 37.210377] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.302374] usb 1-8: USB disconnect, address 5
[ 37.566452] eth0: forcedeth.c: subsystem: 01462:7252 bound to 0000:00:14.0
[ 38.321854] ieee1394: Host added: ID:BUS[0-00:1023] GUID[851716008f860010]
[ 38.473570] usb 1-4: new low speed USB device using ohci_hcd and address 6
[ 38.669763] usb 1-4: configuration #1 chosen from 1 choice
[ 38.977233] usb 1-6: new low speed USB device using ohci_hcd and address 7
[ 39.196396] usb 1-6: configuration #1 chosen from 1 choice
[ 39.208389] input: HID 0b38:0010 as /class/input/input6
[ 39.208402] input: USB HID v1.10 Keyboard [HID 0b38:0010] on usb-0000:00:0b.0-6
[ 39.221347] input: HID 0b38:0010 as /class/input/input7
[ 39.221353] input: USB HID v1.10 Device [HID 0b38:0010] on usb-0000:00:0b.0-6
[ 39.528855] usb 1-7: new low speed USB device using ohci_hcd and address 8
[ 39.736000] usb 1-7: configuration #1 chosen from 1 choice
[ 39.746002] input: Microsoft Microsoft Digital Media Pro Keyboard as /class/input/input8
[ 39.746013] input: USB HID v1.11 Keyboard [Microsoft Microsoft Digital Media Pro Keyboard] on usb-0000:00:0b.0-7
[ 39.758994] input: Microsoft Microsoft Digital Media Pro Keyboard as /class/input/input9
[ 39.758999] input: USB HID v1.11 Device [Microsoft Microsoft Digital Media Pro Keyboard] on usb-0000:00:0b.0-7
[ 40.064493] usb 1-8: new low speed USB device using ohci_hcd and address 9
[ 40.270597] usb 1-8: configuration #1 chosen from 1 choice
[ 40.280597] input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input10
[ 40.280612] input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-8
[ 44.501721] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.503199] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.793610] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 44.793638] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x6000
[ 45.125354] Linux agpgart interface v0.102 (c) Dave Jones
[ 45.243719] nvidia: module license 'NVIDIA' taints kernel.
[ 45.702279] input: PC Speaker as /class/input/input11
[ 45.741253] parport: PnPBIOS parport detected.
[ 45.741305] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 45.891426] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 45.908108] ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 18
[ 45.908121] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNEC] -> GSI 18 (level, low) -> IRQ 21
[ 45.908128] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 45.908344] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
[ 46.193468] wlan: 0.8.4.2 (0.9.3)
[ 46.209680] ath_pci: 0.9.4.5 (0.9.3)
[ 46.210430] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 17
[ 46.210442] ACPI: PCI Interrupt 0000:04:07.0[A] -> Link [LNKD] -> GSI 17 (level, low) -> IRQ 22
[ 46.545067] Linux video capture interface: v2.00
[ 46.578412] ath_rate_sample: 1.2 (0.9.3)
[ 46.584355] lirc_dev: IR Remote Control driver registered, at major 61
[ 46.586893] lirc_imon: no version for "lirc_unregister_plugin" found: kernel tainted.
[ 46.587273] /usr/src/modules/lirc/drivers/lirc_imon/lirc_imon.c: Driver for Soundgraph iMON MultiMedian IR/VFD, v0.3
[ 46.587275] /usr/src/modules/lirc/drivers/lirc_imon/lirc_imon.c: Venky Raju <dev@venky.ws>
[ 46.637930] /usr/src/modules/lirc/drivers/lirc_imon/lirc_imon.c: imon_probe: found IMON device
[ 46.637939] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 46.638012] /usr/src/modules/lirc/drivers/lirc_imon/lirc_imon.c: imon_probe: Registered iMON plugin (minor:0)
[ 46.638049] /usr/src/modules/lirc/drivers/lirc_imon/lirc_imon.c: imon_probe: iMON device on usb<1:6> initialized
[ 46.638062] usbcore: registered new interface driver lirc_imon
[ 46.648261] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 46.648268] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 46.648272] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 46.648279] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 46.648284] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 46.648287] wifi0: mac 5.6 phy 4.1 5 GHz radio 1.7 2 GHz radio 2.3
[ 46.648291] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 46.648293] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 46.648295] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 46.648296] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 46.648298] wifi0: Use hw queue 8 for CAB traffic
[ 46.648300] wifi0: Use hw queue 9 for beacons
[ 46.685880] wifi0: Atheros 5212: mem=0xfebf0000, irq=22
[ 46.748100] cx2388x v4l2 driver version 0.0.6 loaded
[ 46.748587] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 16
[ 46.748598] ACPI: PCI Interrupt 0000:04:06.0[A] -> Link [LNKC] -> GSI 16 (level, low) -> IRQ 23
[ 46.748638] CORE cx88[0]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected]
[ 46.748641] TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
[ 46.791447] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
[ 46.831299] usbcore: registered new interface driver xpad
[ 46.831304] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 46.913028] tveeprom 2-0050: Hauppauge model 96559, rev C5A0, serial# 442334
[ 46.913032] tveeprom 2-0050: MAC address is 00-0D-FE-06-BF-DE
[ 46.913035] tveeprom 2-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
[ 46.913037] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 46.913040] tveeprom 2-0050: audio processor is CX882 (idx 33)
[ 46.913042] tveeprom 2-0050: decoder processor is CX882 (idx 25)
[ 46.913044] tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter
[ 46.913047] cx88[0]: hauppauge eeprom: model=96559
[ 46.913199] input: cx88 IR (Hauppauge WinTV-HVR130 as /class/input/input12
[ 46.913239] cx88[0]/0: found at 0000:04:06.0, rev: 5, irq: 23, latency: 64, mmio: 0xfb000000
[ 47.014595] tuner 2-0061: chip found @ 0xc2 (cx88[0])
[ 47.017192] tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 47.019758] tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 47.020753] tuner 2-0063: chip found @ 0xc6 (cx88[0])
[ 47.087894] wm8775 2-001b: chip found @ 0x36 (cx88[0])
[ 47.094345] cx88[0]/0: registered device video0 [v4l2]
[ 47.094367] cx88[0]/0: registered device vbi0
[ 47.094389] cx88[0]/0: registered device radio0
[ 47.097880] cx88[0]/2: cx2388x 8802 Driver Manager
[ 47.097901] ACPI: PCI Interrupt 0000:04:06.2[A] -> Link [LNKC] -> GSI 16 (level, low) -> IRQ 23
[ 47.097910] cx88[0]/2: found at 0000:04:06.2, rev: 5, irq: 23, latency: 64, mmio: 0xfd000000
[ 47.164563] cx2388x alsa driver version 0.0.6 loaded
[ 47.164627] ACPI: PCI Interrupt 0000:04:06.1[A] -> Link [LNKC] -> GSI 16 (level, low) -> IRQ 23
[ 47.164653] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 47.205174] cx2388x dvb driver version 0.0.6 loaded
[ 47.205178] cx8802_register_driver() ->registering driver type=dvb access=shared
[ 47.205182] CORE cx88[0]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
[ 47.205186] cx88[0]/2: cx2388x based dvb card
[ 47.290839] DVB: registering new adapter (cx88[0]).
[ 47.290843] DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
[ 47.311854] cx2388x blackbird driver version 0.0.6 loaded
[ 47.311858] cx8802_register_driver() ->registering driver type=blackbird access=shared
[ 47.311862] CORE cx88[0]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
[ 47.311866] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design)
[ 47.312095] cx88[0]/2: registered device video1 [mpeg]
[ 47.400611] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 47.400617] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 17
[ 47.400633] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 47.619388] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 47.880520] fuse init (API version 7.8)
[ 47.902232] lp0: using parport0 (interrupt-driven).
[ 47.947147] Adding 2104504k swap on /dev/disk/by-uuid/da6b6a8f-274b-4114-8625-692191c0e085. Priority:-1 extents:1 across:2104504k
[ 48.095052] NET: Registered protocol family 17
[ 48.267436] EXT3 FS on sda2, internal journal
[ 52.444233] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 52.493701] NTFS volume version 3.1.
[ 55.552210] NET: Registered protocol family 10
[ 55.552303] lo: Disabled Privacy Extensions
[ 57.476973] ibm_acpi: ec object not found
[ 57.537261] input: Power Button (FF) as /class/input/input13
[ 57.540976] ACPI: Power Button (FF) [PWRF]
[ 57.569907] input: Power Button (CM) as /class/input/input14
[ 57.573565] ACPI: Power Button (CM) [PWRB]
[ 57.615117] Using specific hotkey driver
[ 57.643206] No dock devices found.
[ 57.794060] pcc_acpi: loading...
[ 57.958093] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (version 2.00.00)
[ 57.961823] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 61.583391] eth0: no link during initialization.
[ 61.583638] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 62.857093] **WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 0:05.0] forgot to specify physical device; fix it!
[ 62.859709] **WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 0:05.0] forgot to specify physical device; fix it!
[ 62.862181] **WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 0:05.0] forgot to specify physical device; fix it!
[ 63.454290] ppdev: user-space parallel port driver
[ 65.725160] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 65.725165] apm: overridden by ACPI.
[ 66.149795] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 66.446661] ath0: no IPv6 routers present
[ 66.472328] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 66.472803] NFSD: starting 90-second grace period
[ 72.816657] Bluetooth: Core ver 2.11
[ 72.816716] NET: Registered protocol family 31
[ 72.816718] Bluetooth: HCI device and connection manager initialized
[ 72.816721] Bluetooth: HCI socket layer initialized
[ 72.877405] Bluetooth: L2CAP ver 2.8
[ 72.877409] Bluetooth: L2CAP socket layer initialized
[ 72.983901] Bluetooth: RFCOMM socket layer initialized
[ 72.983915] Bluetooth: RFCOMM TTY layer initialized
[ 72.983917] Bluetooth: RFCOMM ver 1.8
[ 80.921559] cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted
[ 83.500520] cx88[0]/2-bb: Firmware upload successful.
[ 83.513022] cx88[0]/2-bb: Firmware version is 0x02060039