This is what my IRCd show for Network name: "Nefarious"
and this is my ircd.conf:
# ircd.conf configuration file for ircd version ircu2.9.mu and ircu2.10
#
# Last Updated: 26, June 2001.
#
# Written by Niels <niels@undernet.org>, based on the original example.conf,
# server code and some real-life (ahem) experience.
#
# Updated and heavily modified by Braden <dbtem@yahoo.com>.
#
# Thanks and credits to: Run, Trillian, Cym, Morrissey, Chaos, Flynn,
# Xorath, WildThang, Mmmm, SeKs, Ghostwolf and
# all other Undernet IRC Admins and Operators,
# and programmers working on the Undernet ircd.
#
# This is an example of the configuration file used by the Undernet ircd.
#
# This document is based on a (fictious) server in Europe with a
# connection to the Undernet IRC network. It is primarily a leaf server,
# but if all the other hubs in Europe aren't in service, it can connect
# to one in the US by itself.
#
# All configuration options start with a letter identifying the option,
# and a colon separated list of options. Unused fields should be left
# blank.
#
# Please note that when ircd puts the configuration lines into practice,
# it parses them exactly the other way round than they are listed here.
# It reads the lines in reverse order.
#
# This means that you should start your I: lines with the "fall through",
# most vanilla one and end with the most detailed.
#
# There is a difference between the "hostname" and the "server name"
# of the machine that the server is run on. For example, the host can
# have "veer.cs.vu.nl" as FQDN, and "Amsterdam.NL.EU.undernet.org" as
# server name.
# A "server mask" is something like "*.EU.UnderNet.org", which is
# matched by "Amsterdam.NL.EU.undernet.org" but not by
# "Manhattan.KS.US.undernet.org".
#
# Please do NOT just rename the example.conf to ircd.conf and expect
# it to work.
# [INCLUDES]
#
# include:</optional/path/file.conf>
#
# If you find your ircd.conf is getting too large or wish to seperate it
# out into files, you can with includes. Below are some examples. The path
# to the file is optional. But if you dont include the path then the ircd
# will check the dir where ircd.conf is for the file.
#
# include:extra.conf
# include:/path/to/extra.conf
#
# Currently if you use linesync then it will not check or know about file
# includes.
# [M:line]
#
# First some information about the server.
# M:<server name>:<virtual host>:<description>:<not used>:<server numeric>
#
# <virtual host> must contain either a * or a valid IPv4 address in
# dotted quad notation. (127.0.0.1) The address MUST be the address
# of a physical interface on the host. This address is used for outgoing
# connections only, see P:lines for listener virtual hosting.
# If in doubt put a * or the IP of your primary interface here.
# The server must be compiled with virtual hosting turned on to get this
# to work correctly.
#
# Note that <server numeric> has to be unique on the network your server
# is running on, must be between 0 and 4095, and is not updated on a rehash.
M:heaven.us.xednet.org::Those who from Heaven to Earth came::1
# [A:line]
#
# This sets information that can be retrieved with the /ADMIN command.
# It should contain at least an admin Email contact address.
# A:<line 1>:<line 2>:<line 3>
A:The Xednet Support Team:Xednet IRC server:IRC Admins <irc@xednet.org>
# [Y:lines]
#
# All connections to the server are associated with a certain "connection
# class", be they incoming or outgoing (initiated by the server), be they
# clients, servers or Martians. (Note that ircd doesn't have direct support
# for Martians (yet?); they will have to register as normal users. ;-)
# Take the following Y: lines only as a guide.
# Y:<class>:<ping freq>:<connect freq>:<maximum links>:<sendq size>
#
# <connect freq> applies only to servers, and specifies the frequency
# that the server tries to autoconnect. setting this to 0 will cause
# the server to attempt to connect repeatedly with no delay until the
# <maximum links> condition is satisfied. This is a Bad Thing(tm).
#
# <maximum links> should be set at either 0 or 1.
#
# Server classes: 90 = all your uplinks for who you do not wish to hub;
# 80 = leaf servers (only used if your server is a hub)
Y:90:90:300:1:9000000
Y:80:90:300:0:9000000
# Client classes. 10 = locals; 2 = for all .net and .com that are not
# in Europe; 1 = for everybody.
Y:10:90:0:100:160000
Y:2:90:0:5:80000
Y:1:90:0:400:160000
# [I:lines]
#
# To allow clients to connect, they need authorization. This can be
# done based on hostmask, address mask, and/or with a password.
# With intelligent use of classes and the maxconnections field in the
# Y: lines, you can let in a specific domain, but get rid of all other
# domains in the same toplevel, thus setting up some sort of "reverse
# K: line".
# I:<IP mask or crap to force resolving>:<opt passwd>:<hostmask>::<class>
#
# Technical description (for examples, see below):
# For every connecting client, the IP address is known. A reverse lookup
# on this IP-number is done to get the (/all) hostname(s).
# Each hostname that belongs to this IP-number is matched to <hostmask>,
# and the I: line is used when any matches; the client will then show
# with this particular hostname. If none of the hostnames match, then
# the IP-number is matched against the <IP mask ...> field, if this matches
# then the I: line is used nevertheless and the client will show with the
# first (main) hostname if any; if the IP-number did not resolve then the
# client will show with the dot notation of the IP-number.
# There is a special case for the UNIX domain sockets and localhost connections
# though; in this case the <IP mask ...> field is compared with the
# name of the server (thus not with any IP-number representation). The name
# of the server is the one returned in the numeric 002 reply, for example:
# 002 Your host is 2.undernet.org[jolan.ppro], running version ...
# Then the "jolan.ppro" is the name used for matching.
# Therefore, unix domain sockets, and connections to localhost would
# match this I: line:
# I:jolan.ppro::foobar::1
# Finally, I: lines with empty <IP mask ..> or <hostmask> fields are skipped.
#
# This is the "fallback" entry. All .uk, .nl, and all unresolved are
# in these two lines.
# By using two different lines, multiple connections from a single IP
# are only allowed from hostnames which have both valid forward and
# reverse DNS mappings.
I:*@*:1:Unresolved::1
I:Resolved::*@*::1
# If you don't want unresolved dudes to be able to connect to your
# server, use just:
# I:NotMatchingCrap::*@*::1
#
# Here, take care of all American ISPs.
#:Resolved::*@*.com::2
#:Resolved::*@*.net::2
# Now list all the .com / .net domains that you wish to have access...
# actually it's less work to do it this way than to do it the other
# way around - K: lining every single ISP in the US.
# I wish people in Holland just got a .nl domain, and not try to be
# cool and use .com...
#I:Resolved::*@*.wirehub.net::1
#I:Resolved::*@*.planete.net::1
#I:Resolved::*@*.ivg.com::1
#I:Resolved::*@*.ib.com::1
#I:Resolved::*@*.ibm.net::1
#I:Resolved::*@*.hydro.com::1
#I:Resolved::*@*.NL.net::1
# You can request a more complete listing, including the "list of standard
# K-lines" from the Routing Committee; it will also be sent to you if
# you apply for a server and get accepted.
#
# Ourselves - this makes sure that we can get in, no matter how full
# the server is (hopefully).
#I:*@193.37.*::*@*.london.ac.uk::10
# You can put a digit (0..9) in the password field, which will make ircd
# only accept a client when the total number of connections to the network
# from the same IP number doesn't exceed this number.
# The following example would accept at most one connection per IP number
# from "*.swipnet.se" and at most two connections from dial up accounts
# that have "dial??.*" as host mask:
# I:Resolved:1:*@*.swipnet.se::1
# I:Resolved:2:*@dial??.*::1
#
# If you are not worried about who connects, this line will allow everyone
# to connect.
I:*::*::1
# [T:lines]
#
# It is possible to show a different Message of the Day to a connecting
# client depending on its origin.
# T:<hostmask>:<path to motd file>
# or:
# T:<classnumber>:<path to motd file>
#
# DPATH/net_com.motd contains a special MOTD where users are encouraged
# to register their domains and get their own I: lines if they're in
# Europe, or move to US.UnderNet.org if they're in the USA.
#T:*.net:net_com.motd
#T:*.com:net_com.motd
#T:2:net_com.motd
# A different MOTD for ourselves, where we point out that the helpdesk
# better not be bothered with questions regarding irc...
#T:*.london.ac.uk:london.motd*/
# [U:lines]
#
# One of the many nice features of Undernet is "Uworld", a program
# connected to the net as a server. This allows it to broadcast any mode
# change, thus allowing opers to, for example, "unlock" a channel that
# has been taken over.
# There is only one slight problem: the TimeStamp protocol prevents this.
# So there is a configuration option to allow them anyway from a certain
# server.
# U:<Server Name>:<Juped Nicks>:*
#
# Note: (1) These lines are agreed on by every server admin on Undernet;
# (2) These lines must be the same on every single server, or results
# will be disasterous; (3) This is a useful feature, not something that
# is a liability and abused regularly (well... :-)
# If you're on Undernet, you MUST have these lines. I cannnot stress
# this enough. If all of the servers don't have the same lines, the
# servers will try to undo the mode hacks that Uworld does. Make SURE that
# all of the servers have the EXACT same Ulines.
#
# As of ircu2.10.05 is it possible to Jupe nicks. Juped nicks need to be
# added to U: lines. As per CFV-0095, the following nicks must be juped,
# it is not allowed to jupe others as well.
U:Uworld.EU.undernet.org:EuWorld,E,StatServ,NoteServ:*
U:Uworld2.undernet.org:UWorld2,ChanSvr,ChanSaver,ChanServ:*
U:Uworld.undernet.org:Uworld,NickSvr,NickSaver,NickServ:*
U:channels.undernet.org:LPT1,X,login:*
U:channels2.undernet.org:LPT2,W,Undernet:*
U:channels3.undernet.org:COM1,V,protocol:*
U:channels4.undernet.org:COM2,U,pass:*
U:channels5.undernet.org:COM3,Y,AUX:*
U:channels6.undernet.org:COM4,Z,newpass:*
# [K:lines]
#
# While running your server, you will most probably encounter individuals
# or groups of persons that you do not wish to have access to your server.
#
# For this purpose, the ircd understands "kill lines".
# K:<host/IP mask>:"<opt reason>":<username mask>
#
# It is possible to use a file as comment for the ban.
# K:<host/IP mask>:!<path to file>:<usermask>
#
# The default reason is: "You are banned from this server"
# Note that K: lines are local to the server; if you ban a person or a
# whole domain from your server, they can get on IRC via any other server
# that doesn't have them K: lined (yet).
#
# With a simple comment, using quotes:
#K:*.au:"Please use a nearer server":*
#K:*.edu:"Please use a nearer server":*
# With a file, prepending a '!' before the filename.
# The file can contain for example, a reason, a link to the
# server rules and a contact address.
#K:unixbox.flooder.co.uk:!kline/youflooded.txt:*luser
#
# IP-based kill lines are designated with a lowercase 'k'. These lines
# use the same format as normal K: lines, except they apply to all hosts,
# even if an IP address has a properly resolving host name.
#k:192.168.*:!klines/martians:*
# Additionally, you may specify a hostmask prefixed with $R to indicate
# a match should be performed against the "real-name" / "info" field
# instead of the host/IP.
#K:$R*sub7*:"You are infected with a Trojan":*
# [C:lines]
#
# You probably want your server connected to other servers, so your users
# have other users to chat with.
# IRC servers connect to other servers forming a network with a star or
# tree topology. Loops are not allowed.
# In this network, two servers can be distinguished: "hub" and "leaf"
# servers. Leaf servers connect to hubs; hubs connect to each other.
# Of course, many servers can't be directly classified in one of these
# categories. Both a fixed and a rule-based decision making system for
# server links is provided for ircd to decide what links to allow, what
# to let humans do themselves, and what links to (forcefully) disallow.
#
# The Connection lines (also known as C lines)
# define what servers the server connect to, and which servers are
# allowed to connect.
# C:<remote hostname or IP>:<password>:<remote server name>:<port>:<class>
#
# The "port" field defines the default port the server tries to connect
# to if an operator uses /connect without specifying a port. This is also
# the port used when the server attempts to auto-connect to the remote
# server. (See Y:lines for more informationa about auto-connects).
#
# Our primary uplink.
#C:1.2.3.4:passwd:Amsterdam.NL.Eu.UnderNet.org:4400:90
# [H:lines]
#
# If your server starts on a bit larger network, you'll probably get
# assigned one or two uplinks to which your server can connect.
# If your uplink(s) also connect to other servers than yours (which is
# probable), you need to define your uplink as being allowed to "hub".
# H:<allowed hostmask>::<server name>:<maximum hops that can be introduced>
#H:*.*::Amsterdam.NL.Eu.UnderNet.org
# [L:lines]
#
# Of course, the opposite is also possible: forcing a server to be
# a leaf. L: lines follow Murphy's Law: if you use them, there's a big
# chance that routing will be screwed up afterwards.
# L:<opt disallowed hostmask>::<server mask>:<opt max depth>
# [D:lines]
#
# For an advanced, real-time rule-based routing decision making system
# you can use Disallow lines. For more information, see doc/readme.crules.
# D:<server mask that ircd will refuse to connect to>::<rule>
# d:<server mask that ircd will not autoconnect to>::<rule>
# D:*.US.UnderNet.org::connected(*.US.UnderNet.org)
# d:*.EU.UnderNet.org::connected(Amsterdam.NL.EU.*)
#
# The following line is recommended for leaf servers:
# d:*::directcon(*)
# [O:lines]
#
# Inevitably, you have reached the part about "IRC Operators". Oper status
# grants some special privileges to a user, like the power to make the
# server break or (try to) establish a connection with another server,
# and to "kill" users off IRC.
# I can write many pages about this; I will restrict myself to saying that
# if you want to appoint somebody as IRC Operator on your server, that
# person should be aware of his/her responsibilities, and that you, being
# the admin, will be held accountable for their actions.
#
# There are two sorts of IRC Operators: "local" and "global". Local opers
# can squit, connect and kill - but only locally: their +o user mode
# is not not passed along to other servers. On Undernet, this prevents
# them from using Uworld as well.
# Depending on some defines in include/config.h, local operators are also
# not allowed to /DIE and /RESTART the server.
# Local operators are designated with a lowercase 'o'
# O:<host/IP mask>:<encrypted password>:<Nick>:<flags>:<connection class>
# o:<host/IP mask>:<encrypted password>:<Nick>:<flags>:<connection class>
#
# There are 2 types of flags currently which will only work if the OPERFLAGS
# is enabled. When the feature is disabled, the flags are ignored.
#
# O - Global Operator
# A - IRC Administrator
#
# The encrypted password is optional. If you wish to encrypt your password,
# there is a utility in the ircd. Please read the file tools/README.
A:*@*:u6gL4IKdtJn8c:maik::10
#o:*@*.uu.net:noncryptedpass:Braden::10
# Note that the <connection class> is optional, but leaving it away
# puts the O: lines in class 0, which usually only accepts one connection
# at a time. If you want users to Oper up more then once per O: line,
# then use a connection class that allows more then one connection,
# for example (using class 10 as in the example above):
#
# Once you OPER your connection class changes no matter where you are or
# your previous connection classes. If the defined connection class is 10
# for the O:line, then your new connection class is 10.
# Y:10:90:0:100:160000
# [S:lines]
#
# S:<spoof host>:<password>:<*.host.cc|a.b.c.*|CIDR>:<ident>
# <spoof host> A hostname to be spoofed
# <password> A password for this spoof host. Used if SETHOST_USER is enabled.
# <hostmask> A hostmask for matching against users that are to be auto
# spoofed. Used if SETHOST_AUTO is enabled. Can be of form:
# host.domain.cc, 127.0.0.1 or 127.0.0.0/24, supports wildcards
# for non-CIDR.
# <ident> A mask for matching against the user's ident reply.
#
# Oper sethost for 'moo.fish.moo'
#S:moo.fish.moo:::
# User & Oper sethost for 'moo.fish.moo'
#S:moo.fish.moo:elitepassword::
# Oper sethost for 'moo.fish.moo' with auto on 'ident@*.example.com"
#S:moo.fish.moo::*.example.com:ident
# Oper sethost for 'moo.fish.moo' with auto on 'user*@*.example.com"
#S:moo.fish.moo::*.example.com:user*
# [B:lines]
# These are lines intended to improve the generic irc users ability to
# use network services. Each line sets up a /<service> alias so that
# users may type that instead of a full /msg command.
#
# for example.. adding:
## B:X2:X2@X2.AfterNET.Services:*
# would result in commands like this being possible
## /X2 HELP
#
# B:<name of command/service>:<target>:<anything to prepend to message>
#
B:X2:X2@X2.AfterNET.Services:*
# B:AUTH:AuthServ@OperServ.AfterNET.Services:"AUTH"
# [b:lines]
# Note lowercase b. These lines will enable the server to forward any
# messages which are prefixed and specific with a b:line. This will
# allow users to use the services without the services being in channel.
#
# b:<prefix>:<server>
#
# b:!:services.network.org
# b:?:services.network.org
#
# Any channel messages prefixed with a ? or a ! would be sent to
# services.network.org in the above examples.
# [P:lines]
# When your server gets more full, you will notice delays when trying to
# connect to your server's primary listening port. It is possible via the
# Port lines to specify additional ports for the ircd to listen to.
# De facto ports are: 6667 - standard; 6660-6669 - additional client
# ports;
# Undernet uses 4400 for server listener ports.
# These are just hints, they are in no way official IANA or IETF policies.
# IANA says we should use port 194, but that requires us to run as root, so
# we don't do that.
#
# P:<hostmask>:<interface>:<[CES][H]>:<port number>
#
# The hostmask setting allows you to specify a range of IP addresses that
# you will allow connections from. This should only contain IP addresses
# and '*' if used. This field only uses IP addresses. This does not use
# DNS in any way so you can't use it to allow *.nl or *.uk. Attempting
# to specify anything other than numbers, dots and stars [0-9.*] will result
# in the port allowing connections from anyone.
#
# The interface setting allows multiply homed hosts to specify which
# interface to use on a port by port basis, if an interface is not specified
# the default interface will be used. The interface MUST be the complete
# IP address for a real hardware interface on the machine running ircd.
# If you want to use virtual hosting *YOU* *MUST* *USE* *THIS* otherwise it
# WILL bind to all interfaces - not what most people seem to expect.
#
# The [CES][H] field is an optional field to specify that a port is a
# server port or a client port and whether it's hidden or not.
# If used the first character MUST be either a C, E, or S.
# If you want to hide a port from /stats p from non-opers follow the C
# or S with an H
#
# C = Client (Ports 6660-6669)
# E = Encrypted SSL (Port 7000)
# S = Server (Port 4400)
#
# Encrypted SSL connections are for client connections ONLY!
#
# P:<hostmask>:<interface>:<[CES][H]>:<port number>
#
# This is a normal server port, you need to have at least one server
# port defined if you want to connect your server to other servers.
P:*:208.53.189.41:S:4400
# This is a Server port that is Hidden
P:*:208.53.189.41:SH:4401
# The following are normal client ports
P:*:208.53.189.41:C:6667
P:*:208.53.189.41:C:6668
P:*:208.53.189.41:C:6666
# This is an Encrypted SSL client port
#P:::E:7000
# This is a hidden client port, listening on the interface associated
# with the IP address 168.8.21.107
#P:*:168.8.21.107:CH:7000
# [R:lines]
#
# These are redirection lines, when a client connects and his/her host
# matches a q:line then a 010 reply is sent with the redir server and
# port. Currently only epic supports a autoredirection when it gets a
# 010 reply (ie it will automatically connect to the server said in the
# 010 reply. Other clients will get a message saying what server and
# port to connect to. Aswell as a unauthorised connection quit.
#
# R:<mask>:<redirection server>:<redirection port>
#
# R:*.aol.com:irc.aol.com:6667
# R:*.us:us.undernet.org:6667
# R:*.nz:nz.undernet.org:6667
# [Q:lines]
#
# This allows you (the admin) to disallow the usage of /OPMODE and
# /CLEARMODE on certain sensitive channels. Opers trying to do that
# will receive a short notice. Depending on the setting of
# OPER_FORCE_OPMODE, OPER_FORCE_LOPMODE and LOCOP_FORCE_LOPMODE,
# global/local opers may override these lines by prefixing the
# channel name with an exclamation mark ('!')
#
# Q:<channel>:<reason>
#
# Note that since the hash mark ('#') is used to start a comment,
# you will have to escape it in the channel name (see below).
# Q:\#shells:"Thou shalt not support the h4><0rz"
# Q:&kiddies:"They can take care of themselves"
# [X:lines]
#
# This allows you (the admin) to prevent clients connecting who are listed
# on DNS blacklists. Their connection will be rejected during the connection
# process along with the name and url you give for the DNSBL they have
# been matched on.
#
# X:<dnsbl.site.org>:"<name>":<flags>:<replies/mask>:"<rejection message>":<rank>
#
#
# Flags:
#
# Bitmask DNSBL: b - See your DNSBL provider as to if you should use this or not.
# Reply DNSBL: r - See your DNSBL provider as to if you should use this or not, this
# type is normally the default type for most DNSBL's.
# Allow Connect: a - Allow the client to connect anyway. This could be used with a
# DNSBL whitelist. This could also be used to allow people in but
# mark their hosts so that channel ops can choose weather they want
# them in thier channel or not.
# Deny Connect: d - If the user is found on this dnsbl then they cant connect, even if
# they are allowed on another X:Line.
# Mark Hostname: m - Mark the hostname of a skipped client.
#
#
# The name option is used for the Mark hostname flag, this must contain hostname
# valid characters only, ie NO spaces. With REPLY DNSBL's you need to list the
# replies in a comma seperate list. See below for an example. With BITMASK DNSBL's
# just again specify the replies you need to match against. The server will sum
# them up and match them against the DNSBL reply. It is highly recomended that
# you place the rejection message in "quotes". Rejection messages are limited
# in length, currently they cant be all that long but that is being worked on. The
# rejected users nick, username, ip, and host can be placed into the rejection
# message by using these codes:
#
# %n - Nickname
# %u - Username
# %h - Hostname
# %i - IP Address
#
# The rank number must be unique over all X:Lines, the higher the number- the more
# rank it has. The highest ranking X:Line which is matched against a user will
# get its name marked in the hostname.
#
# Example:
#
# X:dnsbl.sorbs.net:"sorbs.net":r:1,3,4:"%n!%u@%h Found On Sorbs DNSBL http://www.dnsbl.us.sorbs.net/cgi-bin/lookup?IP=%i":1
#
# This will reject clients who get a return addresses of 1,3 and 4 off
# dnsbl.sorbs.net. Sample rejection message:
#
# "bloggs!someident@google.com Found On Sorbs DNSBL http://www.dnsbl.us.sorbs.net/cgi-bin/lookup?IP=111.222.111.222"
#
# BITMASK Example:
#
# X:dnsbl.dnsbl.net:"dnsbl.net":b:1,3,5:"%n!%u@%h Found On DNSBL":2
#
# I reccomend you take advantage of ircd.conf includes and list your X:Lines in
# a seperate file as it could be quite a large list.
#
# Notes: MAKE SURE you read the DNSBL website before you go ahead and use it
# as they may have rules for large sites/servers who use them. If you do not
# wish to use DNSBL checking then simply do not set any X:lines. I only
# reccomend that you use one DNSBL, due to the amount of time it will take to
# connect with multiple DNSBL's.
# [F:lines]
#
# IRC servers have a large number of options and features. Most of these
# are set at compile time through the use of #define's--see "make config"
# for more details--but we are working to move many of these into the
# configuration file. Feature lines are the hook we're using for this.
# F:<Option>:<Value>
#
# The entire purpose of F:lines are so that you do not have to recompile
# the IRCD everytime you want to change a feature. All of the features
# are listed below, and at the bottom is how to set logging.
#
# A Special Thanks to Kev for writing the documentation of F:lines. It can
# be found at doc/readme.features and the logging documentation can be
# found at doc/readme.log. The defaults used by the Undernet network are
# below.
#
# These F:lines should always be enabled, as they are the only way to
# log some errormessages in case the server dies because of an out of
# memory problem.
# For more information about logging, read doc/readme.log
F:LOG:SYSTEM:FILE:ircd.log
F:LOG:SYSTEM:LEVEL:CRIT
# F:DOMAINNAME:<obtained from /etc/resolv.conf by ./configure>
F:RELIABLE_CLOCK:FALSE
# F:BUFFERPOOL:27000000
# F:HAS_FERGUSON_FLUSHER:FALSE
# F:CLIENT_FLOOD:1024
# F:SERVER_PORT:4400
# F:NODEFAULTMOTD:TRUE
# F:MOTD_BANNER
# F:KILL_IPMISMATCH:FALSE
# F:IDLE_FROM_MSG:TRUE
# F:HUB:FALSE
# F:WALLOPS_OPER_ONLY:FALSE
# F:NODNS:FALSE
# F:RANDOM_SEED:<you should set one explicitly>
# F:DEFAULT_LIST_PARAM
# F:NICKNAMEHISTORYLENGTH:800
F:HOST_HIDING:TRUE
F:HOST_HIDING_STYLE:1
F:OPERHOST_HIDING:TRUE
F:HIDDEN_HOST:users.xednet.org
F:HIDDEN_OPERHOST:opers.undernet.org
# F:HIDDEN_IP:127.0.0.1
# F:CONNEXIT_NOTICES:FALSE
# F:EXTENDED_ACCOUNTS:TRUE
# F:LOGIN_ON_CONNECT:FALSE
# F:DNSBL_LOC_EXEMPT:FALSE
# F:DNSBL_LOC_EXEMPT_N_ONE:"If you have an account with %s services then you can bypass the dnsbl ban by logging in like this: (where Account is your account name and Password is your password."
# F:DNSBL_LOC_EXEMPT_N_TWO:"Type \002/QUOTE PASS AuthServ Account :Password\002 to connect"
# F:EXEMPT_EXPIRE:172800
# F:DNSBL_MARK_FAKEHOST:TRUE
F:DEFAULT_UMODE:"+i"
# F:TIME_IN_TIMEOUT:FALSE
# F:KILLCHASETIMELIMIT:30
F:MAXCHANNELSPERUSER:20
# F:AVEXCEPTLEN:40
F:MAXEXCEPTS:45
# F:HIS_EXCEPTWHO:TRUE
# F:HALFOPS:FALSE
# F:NICKLEN:15
# F:CHANNELLEN:200
# F:AVBANLEN:40
F:MAXBANS:45
# F:MAXSILES:15
# F:HANGONGOODLINK:300
# F:HANGONRETRYDELAY:10
# F:CONNECTTIMEOUT:90
# F:TIMESEC:60
# F:MAXIMUM_LINKS:1
# F:PINGFREQUENCY:120
# F:CONNECTFREQUENCY:600
# F:DEFAULTMAXSENDQLENGTH:40000
# F:SHUNMAXUSERCOUNT:20
# F:GLINEMAXUSERCOUNT:20
# F:MPATH:ircd.motd
# F:QPATH:ircd.quotes
# F:EPATH:ircd.rules
# F:OMPATH:ircd.opermotd
# F:RPATH:remote.motd
# F:PPATH:ircd.pid
# F:TPATH:ircd.tune
# F:VIRTUAL_HOST:FALSE
# F:TOS_SERVER:0x08
# F:TOS_CLIENT:0x08
# F:POLLS_PER_LOOP:200
# F:IRCD_RES_TIMEOUTS:4
# F:IRCD_RES_RETRIES:2
# F:AUTH_TIMEOUT:9
# F:ANNOUNCE_INVITES:TRUE
# F:AUTOJOIN:FALSE
# F:AUTOJOIN_NOTICE:TRUE
# F:AUTOJOIN_NOTICE_VALUE:"*** Notice -- You are now being autojoined into \#nefarious"
# F:BADCHAN_REASON:"This Channel Has Been Banned"
# F:MOTD_LAST_CHANGED:FALSE
# F:OPERFLAGS:FALSE
F:WHOIS_OPER:"is an IRC Operator"
F:WHOIS_ADMIN:"is the Godfather"
F:WHOIS_SERVICE:"is a Network Service"
# F:QUOTES:TRUE
# F:POLICY_NOTICE:TRUE
# F:OPER_WHOIS_SECRET:TRUE
# F:CRYPT_OPER_PASSWORD:TRUE
F:OPER_NO_CHAN_LIMIT:TRUE
F:OPER_MODE_LCHAN:TRUE
F:OPER_WALK_THROUGH_LMODES:TRUE
F:NO_OPER_DEOP_LCHAN:FALSE
F:SHOW_INVISIBLE_USERS:TRUE
F:SHOW_ALL_INVISIBLE_USERS:TRUE
F:UNLIMIT_OPER_QUERY:FALSE
F:LOCAL_KILL_ONLY:TRUE
F:OPER_SINGLELETTERNICK:TRUE
# F:CHECK_EXTENDED:TRUE
# F:MAX_CHECK_OUTPUT:1000
# F:CONFIG_OPERCMDS:FALSE
F:TOPIC_BURST:TRUE
# F:HOST_IN_TOPIC:TRUE
F:AUTOCHANMODES:TRUE
F:AUTOCHANMODES_LIST:"CnNt"
# F:LOCAL_CHANNELS:TRUE
F:SETHOST:TRUE
# F:SETHOST_USER:TRUE
# F:SETHOST_AUTO:TRUE
# F:SETHOST_FREEFORM:FALSE
# F:RULES:TRUE
# F:OPERMOTD:TRUE
# F:EXCEPTS:FALSE
# F:BREAK_P10:FALSE
# F:FLEXABLEKEYS:FALSE
# F:NOTHROTTLE:FALSE
# F:CREATE_CHAN_OPER_ONLY:FALSE
# F:REMOTE_OPER:FALSE
# F:OPER_KILL:TRUE
# F:OPER_REHASH:TRUE
# F:OPER_RESTART:TRUE
# F:OPER_DIE:TRUE
# F:OPER_SHUN:TRUE
# F:OPER_LSHUN:TRUE
# F:OPER_GLINE:TRUE
# F:OPER_LGLINE:TRUE
# F:OPER_JUPE:TRUE
# F:OPER_LJUPE:TRUE
# F:OPER_OPMODE:TRUE
# F:OPER_LOPMODE:TRUE
F:OPER_FORCE_OPMODE:TRUE
F:OPER_FORCE_LOPMODE:TRUE
F:OPER_BADCHAN:FALSE
F:OPER_LBADCHAN:FALSE
F:OPER_SET:TRUE
F:OPERS_SEE_IN_SECRET_CHANNELS:TRUE
# F:OPER_WIDE_SHUN:TRUE
# F:OPER_WIDE_GLINE:TRUE
# F:LOCOP_KILL:TRUE
# F:LOCOP_REHASH:TRUE
# F:LOCOP_RESTART:FALSE
# F:LOCOP_DIE:FALSE
# F:LOCOP_LSHUN:TRUE
# F:LOCOP_LGLINE:TRUE
# F:LOCOP_LJUPE:TRUE
# F:LOCOP_LOPMODE:TRUE
# F:LOCOP_FORCE_LOPMODE:TRUE
# F:LOCOP_LBADCHAN:FALSE
# F:LOCOP_SET:FALSE
# F:LOCOP_SEE_IN_SECRET_CHANNELS:FALSE
# F:LOCOP_WIDE_SHUN:FALSE
# F:LOCOP_WIDE_GLINE:FALSE
F:RESTARTPASS:"d13f0ry0u"
F:DIEPASS:"rs4y0u"
F:TARGET_LIMITING:TRUE
# F:DNSBL_CHECKS:FALSE
# F:DNSBL_EXEMPT_CLASS:0
F:ERR_OPERONLYCHAN:"Cannot join channel (+O)"
F:HIS_IRCOPS:TRUE
F:HIS_IRCOPS_SERVERS:TRUE
F:HIS_MAP:TRUE
# F:HIS_MAP_SCRAMBLED:TRUE
# F:HIS_SNOTICES:TRUE
# F:HIS_SNOTICES_OPER_ONLY:TRUE
# F:HIS_DESYNCS:TRUE
# F:HIS_DEBUG_OPER_ONLY:TRUE
# F:HIS_WALLOPS:TRUE
# F:HIS_LINKS:TRUE
# F:HIS_LINKS_SCRAMBLED:TRUE
# F:HIS_TRACE:TRUE
# F:HIS_SHUN_REASON:TRUE
# F:HIS_STATS_l:TRUE
# F:HIS_STATS_B:TRUE
# F:HIS_STATS_b:TRUE
# F:HIS_STATS_c:TRUE
# F:HIS_STATS_g:TRUE
# F:HIS_STATS_h:TRUE
# F:HIS_STATS_k:TRUE
# F:HIS_STATS_f:TRUE
# F:HIS_STATS_i:TRUE
# F:HIS_STATS_j:TRUE
# F:HIS_STATS_M:TRUE
# F:HIS_STATS_m:TRUE
# F:HIS_STATS_o:TRUE
# F:HIS_STATS_p:TRUE
# F:HIS_STATS_q:TRUE
# F:HIS_STATS_R:TRUE
# F:HIS_STATS_r:TRUE
# F:HIS_STATS_d:TRUE
# F:HIS_STATS_e:TRUE
# F:HIS_STATS_s:TRUE
# F:HIS_STATS_t:TRUE
# F:HIS_STATS_T:TRUE
# F:HIS_STATS_u:FALSE
# F:HIS_STATS_U:TRUE
# F:HIS_STATS_v:TRUE
# F:HIS_STATS_w:FALSE
# F:HIS_STATS_x:TRUE
# F:HIS_STATS_X:TRUE
# F:HIS_STATS_y:TRUE
# F:HIS_STATS_z:TRUE
F:HIS_WHOIS_SERVERNAME:FALSE
F:HIS_WHOIS_IDLETIME:FALSE
# F:HIS_WHOIS_LOCALCHAN:TRUE
# F:HIS_WHO_SERVERNAME:TRUE
# F:HIS_WHO_HOPCOUNT:TRUE
F:HIS_BANWHO:FALSE
F:HIS_KILLWHO:FALSE
# F:HIS_REWRITE:TRUE
# F:HIS_REMOTE:1
# F:HIS_SCRAMBLED_CACHE_TIME:604800
# F:HIS_NETSPLIT:TRUE
# F:HIS_SHUN:TRUE
# F:HIS_GLINE:TRUE
# F:HIS_SERVERNAME:"*.Xednet"
# F:HIS_SERVERINFO:"evilnet development"
# F:HIS_URLSERVERS:"http://sourceforge.net/projects/evilnet/"
F:NETWORK:"Xednet"
# F:URL_CLIENTS:"http://www.ircreviews.org/clients/"
# F:BADUSER_URL:"http://www.mirc.co.uk/help/servererrors.html"
# Well, you have now reached the end of this sample configuration
# file. If you have any questions, feel free to mail
# <coder-com@undernet.org>. If you are interested in linking your
# server to the Undernet IRC network visit
# http://www.routing-com.undernet.org/, and if there are any
# problems then contact <routing-com@undernet.org> asking for
# information. Upgrades of the Undernet ircd can be found on
# http://coder-com.undernet.org/.
#
# For the rest: Good Luck!
#
# -- Niels.