Advertising
- Something
- Friday, May 11th, 2007 at 4:56:30am UTC
- [email protected]:~$ sudo hdparm -I /dev/hda
- /dev/hda:
- ATA device, with non-removable media
- Model Number: WDC WD2500JB-00REA0
- Serial Number: WD-WMANK1776011
- Firmware Revision: 20.00K20
- Standards:
- Supported: 7 6 5 4
- Likely used: 7
- Configuration:
- Logical max current
- cylinders 16383 4047
- heads 16 16
- sectors/track 63 255
- --
- CHS current addressable sectors: 16511760
- LBA user addressable sectors: 268435455
- LBA48 user addressable sectors: 488397168
- device size with M = 1024*1024: 238475 MBytes
- device size with M = 1000*1000: 250059 MBytes (250 GB)
- Capabilities:
- LBA, IORDY(can be disabled)
- Standby timer values: spec'd by Standard, with device specific minimum
- R/W multiple sector transfer: Max = 16 Current = 0
- Recommended acoustic management value: 128, current value: 254
- DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
- Cycle time: min=120ns recommended=120ns
- PIO: pio0 pio1 pio2 pio3 pio4
- Cycle time: no flow control=120ns IORDY flow control=120ns
- Commands/features:
- Enabled Supported:
- SMART feature set
- Security Mode feature set
- * Power Management feature set
- * Write cache
- * Look-ahead
- * Host Protected Area feature set
- * WRITE_BUFFER command
- * READ_BUFFER command
- * NOP cmd
- * DOWNLOAD_MICROCODE
- SET_MAX security extension
- * Automatic Acoustic Management feature set
- * 48-bit Address feature set
- * Device Configuration Overlay feature set
- * Mandatory FLUSH_CACHE
- * FLUSH_CACHE_EXT
- * SMART error logging
- * SMART self-test
- * General Purpose Logging feature set
- * SMART Command Transport (SCT) feature set
- * SCT Long Sector Access (AC1)
- * SCT LBA Segment Access (AC2)
- * SCT Error Recovery Control (AC3)
- * SCT Features Control (AC4)
- * SCT Data Tables (AC5)
- Security:
- Master password revision code = 65534
- supported
- not enabled
- not locked
- frozen
- not expired: security count
- not supported: enhanced erase
- HW reset results:
- CBLID- above Vih
- Device num = 0 determined by the jumper
- Checksum: correct
advertising
Update the Post
Either update this post and resubmit it with changes, or make a new post.
You may also comment on this post.
Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.