Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p3 #0: Thu Apr 26 01:54:28 EDT 2007
sullrich@builder6.pfsense.com:/usr/obj.pfSense/usr/src/sys/pfSense.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III Xeon (930.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 671072256 (639 MB)
avail memory = 647147520 (617 MB)
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <COMPAQ RACEBAIT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
ACPI-0252: *** Error: No object was returned from [\\_SB_.FAKE._CRS] (Node 0xc3cb78a0), AE_NOT_EXIST
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci_link1: BIOS IRQ 10 for 0.8.INTA is invalid
pci_link0: apparently invalid index 0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 3.0 (no driver attached)
pci0: <display, VGA> at device 5.0 (no driver attached)
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x2400-0x243f irq 9 at device 8.0 on pci0
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:a0:24:cc:1d:7e
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2440-0x244f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci_link7: BIOS IRQ 10 for 2.5.INTA is invalid
pci_link8: BIOS IRQ 10 for 2.6.INTA is invalid
pci2: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3000-0x301f mem 0xc6de0000-0xc6dfffff,0xc6dc0000-0xc6ddffff irq 9 at dev
ice 5.0 on pci2
em0: Ethernet address: 00:02:b3:aa:c8:cc
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3020-0x303f mem 0xc6da0000-0xc6dbffff,0xc6d80000-0xc6d9ffff irq 9 at dev
ice 6.0 on pci2
em1: Ethernet address: 00:02:b3:aa:c6:54
pcib2: <ACPI Host-PCI bridge> on acpi0
pci_link6: BIOS IRQ 11 for 5.5.INTA is invalid
pci_link10: BIOS IRQ 5 for 5.4.INTB is invalid
pci5: <ACPI PCI bus> on pcib2
sym0: <896> port 0x4000-0x40ff mem 0xc6fffc00-0xc6ffffff,0xc6ffc000-0xc6ffdfff irq 15 at device 4.0 on pci5
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: [GIANT-LOCKED]
sym1: <896> port 0x4400-0x44ff mem 0xc6ffbc00-0xc6ffbfff,0xc6ff8000-0xc6ff9fff irq 15 at device 4.1 on pci5
# dmesg | grep irq
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x2400-0x243f irq 9 at device 8.0 on pci0
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3000-0x301f mem 0xc6de0000-0xc6dfffff,0xc6dc0000-0xc6ddffff irq 9 at device 5.0 on pci2
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3020-0x303f mem 0xc6da0000-0xc6dbffff,0xc6d80000-0xc6d9ffff irq 9 at device 6.0 on pci2
sym0: <896> port 0x4000-0x40ff mem 0xc6fffc00-0xc6ffffff,0xc6ffc000-0xc6ffdfff irq 15 at device 4.0 on pci5
sym1: <896> port 0x4400-0x44ff mem 0xc6ffbc00-0xc6ffbfff,0xc6ff8000-0xc6ff9fff irq 15 at device 4.1 on pci5
ciss0: <Compaq Smart Array 5300> port 0x4800-0x48ff mem 0xc6f80000-0xc6fbffff,0xc6e00000-0xc6efffff irq 15 at device 5.0 on pci5
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77d irq 7 drq 0 on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on acpi0
# dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p3 #0: Thu Apr 26 01:54:28 EDT 2007
sullrich@builder6.pfsense.com:/usr/obj.pfSense/usr/src/sys/pfSense.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III Xeon (930.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 671072256 (639 MB)
avail memory = 647147520 (617 MB)
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <COMPAQ RACEBAIT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
ACPI-0252: *** Error: No object was returned from [\\_SB_.FAKE._CRS] (Node 0xc3cb78a0), AE_NOT_EXIST
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci_link1: BIOS IRQ 10 for 0.8.INTA is invalid
pci_link0: apparently invalid index 0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 3.0 (no driver attached)
pci0: <display, VGA> at device 5.0 (no driver attached)
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x2400-0x243f irq 9 at device 8.0 on pci0
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:a0:24:cc:1d:7e
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2440-0x244f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci_link7: BIOS IRQ 10 for 2.5.INTA is invalid
pci_link8: BIOS IRQ 10 for 2.6.INTA is invalid
pci2: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3000-0x301f mem 0xc6de0000-0xc6dfffff,0xc6dc0000-0xc6ddffff irq 9 at device 5.0 on pci2
em0: Ethernet address: 00:02:b3:aa:c8:cc
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3020-0x303f mem 0xc6da0000-0xc6dbffff,0xc6d80000-0xc6d9ffff irq 9 at device 6.0 on pci2
em1: Ethernet address: 00:02:b3:aa:c6:54
pcib2: <ACPI Host-PCI bridge> on acpi0
pci_link6: BIOS IRQ 11 for 5.5.INTA is invalid
pci_link10: BIOS IRQ 5 for 5.4.INTB is invalid
pci5: <ACPI PCI bus> on pcib2
sym0: <896> port 0x4000-0x40ff mem 0xc6fffc00-0xc6ffffff,0xc6ffc000-0xc6ffdfff irq 15 at device 4.0 on pci5
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: [GIANT-LOCKED]
sym1: <896> port 0x4400-0x44ff mem 0xc6ffbc00-0xc6ffbfff,0xc6ff8000-0xc6ff9fff irq 15 at device 4.1 on pci5
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: [GIANT-LOCKED]
ciss0: <Compaq Smart Array 5300> port 0x4800-0x48ff mem 0xc6f80000-0xc6fbffff,0xc6e00000-0xc6efffff irq 15 at device 5.0 on pci5
ciss0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77d irq 7 drq 0 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 930391152 Hz quality 800
Timecounters tick every 1.000 msec
Fast IPsec: Initialized Security Association Processing.
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <COMPAQ SC-140S/SE04> at ata0-master PIO4
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 17363MB (35561280 512 byte sectors: 255H 32S/T 4358C)
GEOM_LABEL: Label for provider fd0 is msdosfs/ .
Trying to mount root from ufs:/dev/da0s1a
xl0: link state changed to UP
em1: link state changed to DOWN
vlan0: link state changed to DOWN
em0: link state changed to DOWN
xl0: link state changed to DOWN
xl0: link state changed to UP
em1: link state changed to UP
vlan4: link state changed to UP
vlan3: link state changed to UP
vlan2: link state changed to UP
vlan1: link state changed to UP
vlan0: link state changed to UP
em0: link state changed to UP
pflog0: promiscuous mode enabled