rendered paste bodypci:May 4 15:55:46 x3 kernel: [ 1549.668000] e1000: eth0: e1000_watchdog: NIC Link is DownMay 4 15:55:48 x3 kernel: [ 1551.644000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full DuplexMay 4 15:55:48 x3 kernel: [ 1551.644000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSOMay 4 15:55:48 x3 kernel: [ 1551.644000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyMay 4 15:55:59 x3 kernel: [ 1562.512000] eth0: no IPv6 routers presentMay 4 15:58:44 x3 kernel: [ 1727.644000] e1000: eth0: e1000_watchdog: NIC Link is DownMay 4 15:58:46 x3 kernel: [ 1729.524000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full DuplexMay 4 15:58:46 x3 kernel: [ 1729.524000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSOMay 4 15:58:46 x3 kernel: [ 1729.524000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyMay 4 16:19:03 x3 kernel: [ 2946.492000] usb 1-1: new low speed USB device using uhci_hcd and address 3May 4 16:19:03 x3 kernel: [ 2946.644000] usb 1-1: configuration #1 chosen from 1 choiceMay 4 16:19:03 x3 kernel: [ 2946.976000] usbcore: registered new interface driver hiddevMay 4 16:19:03 x3 kernel: [ 2946.988000] input: HID 04b3:3107 as /class/input/input9May 4 16:19:03 x3 kernel: [ 2946.988000] input: USB HID v1.00 Mouse [HID 04b3:3107] on usb-0000:00:1d.0-1May 4 16:19:03 x3 kernel: [ 2946.988000] usbcore: registered new interface driver usbhidMay 4 16:19:03 x3 kernel: [ 2946.988000] drivers/usb/input/hid-core.c: v2.6:USB HID core driverMay 4 16:30:10 x3 kernel: [ 3613.372000] e1000: eth0: e1000_watchdog: NIC Link is DownMay 4 16:30:32 x3 kernel: [ 3635.372000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full DuplexMay 4 16:30:32 x3 kernel: [ 3635.372000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSOMay 4 16:30:32 x3 kernel: [ 3635.372000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyMay 4 16:30:42 x3 kernel: [ 3645.728000] eth0: no IPv6 routers presentMay 4 16:31:18 x3 kernel: [ 3681.068000] e1000: eth0: e1000_watchdog: NIC Link is DownMay 4 16:31:19 x3 kernel: [ 3682.356000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full DuplexMay 4 16:31:19 x3 kernel: [ 3682.356000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSOMay 4 16:31:19 x3 kernel: [ 3682.356000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyMay 4 16:31:19 x3 kernel: [ 3682.756000] e1000: eth0: e1000_watchdog: NIC Link is DownMay 4 16:31:29 x3 kernel: [ 3692.752000] eth0: no IPv6 routers presentMay 4 16:37:32 x3 kernel: [ 4055.224000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full DuplexMay 4 16:37:32 x3 kernel: [ 4055.224000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSOMay 4 16:37:32 x3 kernel: [ 4055.224000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyMay 4 16:37:43 x3 kernel: [ 4066.136000] eth0: no IPv6 routers presentMay 4 16:45:48 x3 kernel: [ 4551.224000] e1000: eth0: e1000_watchdog: NIC Link is DownMay 4 17:16:35 x3 kernel: [ 6398.892000] usb 4-1: new full speed USB device using uhci_hcd and address 3May 4 17:16:36 x3 kernel: [ 6399.064000] usb 4-1: configuration #1 chosen from 1 choiceMay 4 17:16:36 x3 kernel: [ 6399.240000] Bluetooth: HCI USB driver ver 2.9May 4 17:16:36 x3 kernel: [ 6399.244000] usbcore: registered new interface driver hci_usbMay 4 17:17:02 x3 kernel: [ 6425.168000] hci_acldata_packet: hci0 ACL packet for unknown connection handle 12May 4 17:17:02 x3 kernel: [ 6425.364000] hci_acldata_packet: hci0 ACL packet for unknown connection handle 12May 4 17:19:01 x3 kernel: [ 6544.344000] hci_acldata_packet: hci0 ACL packet for unknown connection handle 11May 4 17:19:02 x3 kernel: [ 6545.052000] hci_acldata_packet: hci0 ACL packet for unknown connection handle 11May 4 17:22:10 x3 kernel: [ 6733.372000] hci_acldata_packet: hci0 ACL packet for unknown connection handle 11May 4 17:22:10 x3 kernel: [ 6733.676000] hci_acldata_packet: hci0 ACL packet for unknown connection handle 11May 4 17:23:08 x3 kernel: [ 6791.740000] hci_acldata_packet: hci0 ACL packet for unknown connection handle 11May 4 17:23:08 x3 kernel: [ 6791.912000] hci_acldata_packet: hci0 ACL packet for unknown connection handle 11May 4 17:27:50 x3 kernel: [ 7073.408000] hci_acldata_packet: hci0 ACL packet for unknown connection handle 11May 4 17:27:50 x3 kernel: [ 7073.620000] hci_acldata_packet: hci0 ACL packet for unknown connection handle 11May 4 17:32:47 x3 kernel: [ 7370.224000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 4 17:32:47 x3 kernel: [ 7370.500000] ACPI: PCI interrupt for device 0000:03:00.0 disabledMay 4 17:32:47 x3 kernel: [ 7370.536000] ieee80211_crypt: unregistered algorithm 'NULL'May 4 17:32:49 x3 kernel: [ 7372.468000] PM: Preparing system for mem sleepMay 4 17:32:49 x3 kernel: [ 7372.468000] Disabling non-boot CPUs ...May 4 17:32:49 x3 kernel: [ 7372.628000] Breaking affinity for irq 12May 4 17:32:49 x3 kernel: [ 7372.628000] Breaking affinity for irq 23May 4 17:32:49 x3 kernel: [ 7372.632000] CPU 1 is now offlineMay 4 17:32:49 x3 kernel: [ 7372.632000] SMP alternatives: switching to UP codeMay 4 17:33:04 x3 kernel: [ 7372.636000] CPU1 is downMay 4 17:33:04 x3 kernel: [ 7372.636000] Stopping tasks ... done.May 4 17:33:04 x3 kernel: [ 7373.024000] Suspending console(s)May 4 17:33:04 x3 kernel: [ 7373.024000] usb 4-1:1.3: suspendMay 4 17:33:04 x3 kernel: [ 7373.024000] usb 4-1:1.2: suspendMay 4 17:33:04 x3 kernel: [ 7373.024000] hci_usb 4-1:1.1: suspendMay 4 17:33:04 x3 kernel: [ 7373.024000] hci_usb 4-1:1.0: suspendMay 4 17:33:04 x3 kernel: [ 7373.024000] usb 4-1: suspend, may wakeupMay 4 17:33:04 x3 kernel: [ 7373.048000] usbhid 1-1:1.0: suspendMay 4 17:33:04 x3 kernel: [ 7373.048000] usb 1-1: suspend, may wakeupMay 4 17:33:04 x3 kernel: [ 7373.064000] platform bluetooth: suspendMay 4 17:33:04 x3 kernel: [ 7373.064000] platform dock.0: suspendMay 4 17:33:04 x3 kernel: [ 7373.064000] iTCO_wdt iTCO_wdt: suspendMay 4 17:33:04 x3 kernel: [ 7373.064000] sd 0:0:0:0: suspendMay 4 17:33:04 x3 kernel: [ 7373.064000] sr 5:0:0:0: suspendMay 4 17:33:04 x3 kernel: [ 7373.064000] sd 1:0:0:0: suspendMay 4 17:33:04 x3 kernel: [ 7373.744000] usbdev4.2_ep83: PM: suspend 0->2, parent 4-2:1.0 already 2May 4 17:33:04 x3 kernel: [ 7373.744000] usbdev4.2_ep02: PM: suspend 0->2, parent 4-2:1.0 already 2May 4 17:33:04 x3 kernel: [ 7373.744000] usbdev4.2_ep81: PM: suspend 0->2, parent 4-2:1.0 already 2May 4 17:33:04 x3 kernel: [ 7373.744000] usb 4-2:1.0: PM: suspend 2-->2May 4 17:33:04 x3 kernel: [ 7373.744000] usb 4-2:1.0: PM: suspend 2->2, parent 4-2 already 2May 4 17:33:04 x3 kernel: [ 7373.744000] usbdev4.2_ep00: PM: suspend 0->2, parent 4-2 already 2May 4 17:33:04 x3 kernel: [ 7373.744000] usb 4-2: PM: suspend 2-->2May 4 17:33:04 x3 kernel: [ 7373.744000] usb-storage 5-2:1.0: suspendMay 4 17:33:04 x3 kernel: [ 7373.744000] usb 5-2: suspendMay 4 17:33:04 x3 kernel: [ 7373.760000] hub 5-0:1.0: suspendMay 4 17:33:04 x3 kernel: [ 7373.760000] usb usb5: suspend, may wakeupMay 4 17:33:04 x3 kernel: [ 7373.760000] hub 4-0:1.0: suspendMay 4 17:33:04 x3 kernel: [ 7373.760000] usb usb4: suspend, may wakeupMay 4 17:33:04 x3 kernel: [ 7373.760000] usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2May 4 17:33:04 x3 kernel: [ 7373.760000] hub 3-0:1.0: PM: suspend 2-->2May 4 17:33:04 x3 kernel: [ 7373.760000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2May 4 17:33:04 x3 kernel: [ 7373.760000] usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2May 4 17:33:04 x3 kernel: [ 7373.760000] usb usb3: PM: suspend 2-->2May 4 17:33:04 x3 kernel: [ 7373.760000] usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2May 4 17:33:04 x3 kernel: [ 7373.760000] hub 2-0:1.0: PM: suspend 2-->2May 4 17:33:04 x3 kernel: [ 7373.760000] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2May 4 17:33:04 x3 kernel: [ 7373.760000] usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2May 4 17:33:04 x3 kernel: [ 7373.760000] usb usb2: PM: suspend 2-->2May 4 17:33:04 x3 kernel: [ 7373.760000] hub 1-0:1.0: suspendMay 4 17:33:04 x3 kernel: [ 7373.760000] usb usb1: suspend, may wakeupMay 4 17:33:04 x3 kernel: [ 7373.760000] platform vesafb.0: suspendMay 4 17:33:04 x3 kernel: [ 7373.760000] platform eisa.0: suspendMay 4 17:33:04 x3 kernel: [ 7373.760000] i8042 i8042: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] serial8250 serial8250: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci_express 0000:00:1c.3:pcie02: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci_express 0000:00:1c.3:pcie00: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci_express 0000:00:1c.2:pcie02: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci_express 0000:00:1c.2:pcie00: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci_express 0000:00:1c.1:pcie02: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci_express 0000:00:1c.1:pcie00: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci_express 0000:00:1c.0:pcie02: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci_express 0000:00:1c.0:pcie00: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci_express 0000:00:01.0:pcie00: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pcspkr pcspkr: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pnp 00:0b: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pnp 00:0a: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] i8042 aux 00:09: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] i8042 kbd 00:08: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pnp 00:07: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pnp 00:06: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pnp 00:05: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pnp 00:04: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pnp 00:03: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] system 00:02: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pnp 00:01: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] system 00:00: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] yenta_cardbus 0000:15:00.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci 0000:03:00.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci 0000:02:00.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci 0000:01:00.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] pci 0000:00:1f.3: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] ahci 0000:00:1f.2: suspendMay 4 17:33:04 x3 kernel: [ 7374.740000] ACPI: PCI interrupt for device 0000:00:1f.2 disabledMay 4 17:33:04 x3 kernel: [ 7374.756000] ata_piix 0000:00:1f.1: suspendMay 4 17:33:04 x3 kernel: [ 7374.756000] ata6: ACPI get timing mode failed.May 4 17:33:04 x3 kernel: [ 7374.756000] ACPI: PCI interrupt for device 0000:00:1f.1 disabledMay 4 17:33:04 x3 kernel: [ 7374.756000] pci_set_power_state(): 0000:00:1f.1: state=3, current state=5May 4 17:33:04 x3 kernel: [ 7374.756000] pci 0000:00:1f.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.756000] pci 0000:00:1e.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.756000] ehci_hcd 0000:00:1d.7: suspend, may wakeupMay 4 17:33:04 x3 kernel: [ 7374.756000] ACPI: PCI interrupt for device 0000:00:1d.7 disabledMay 4 17:33:04 x3 kernel: [ 7374.772000] uhci_hcd 0000:00:1d.3: suspendMay 4 17:33:04 x3 kernel: [ 7374.772000] ACPI: PCI interrupt for device 0000:00:1d.3 disabledMay 4 17:33:04 x3 kernel: [ 7374.772000] uhci_hcd 0000:00:1d.2: suspendMay 4 17:33:04 x3 kernel: [ 7374.772000] ACPI: PCI interrupt for device 0000:00:1d.2 disabledMay 4 17:33:04 x3 kernel: [ 7374.772000] uhci_hcd 0000:00:1d.1: suspendMay 4 17:33:04 x3 kernel: [ 7374.772000] ACPI: PCI interrupt for device 0000:00:1d.1 disabledMay 4 17:33:04 x3 kernel: [ 7374.772000] uhci_hcd 0000:00:1d.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.772000] ACPI: PCI interrupt for device 0000:00:1d.0 disabledMay 4 17:33:04 x3 kernel: [ 7374.772000] pcieport-driver 0000:00:1c.3: suspendMay 4 17:33:04 x3 kernel: [ 7374.772000] pcieport-driver 0000:00:1c.2: suspendMay 4 17:33:04 x3 kernel: [ 7374.772000] pcieport-driver 0000:00:1c.1: suspendMay 4 17:33:04 x3 kernel: [ 7374.772000] pcieport-driver 0000:00:1c.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.772000] HDA Intel 0000:00:1b.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.780000] ACPI: PCI interrupt for device 0000:00:1b.0 disabledMay 4 17:33:04 x3 kernel: [ 7374.796000] pcieport-driver 0000:00:01.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] agpgart-intel 0000:00:00.0: suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] acpi acpi: suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] PM: Entering mem sleepMay 4 17:33:04 x3 kernel: [ 7374.796000] platform bluetooth: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] platform dock.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] iTCO_wdt iTCO_wdt: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] platform vesafb.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] platform eisa.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] i8042 i8042: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] serial8250 serial8250: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pcspkr pcspkr: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] yenta_cardbus 0000:15:00.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pci 0000:03:00.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pci 0000:02:00.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pci 0000:01:00.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pci 0000:00:1f.3: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pci 0000:00:1f.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pci 0000:00:1e.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pcieport-driver 0000:00:1c.3: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pcieport-driver 0000:00:1c.2: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pcieport-driver 0000:00:1c.1: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pcieport-driver 0000:00:1c.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] HDA Intel 0000:00:1b.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] pcieport-driver 0000:00:01.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] agpgart-intel 0000:00:00.0: LATE suspendMay 4 17:33:04 x3 kernel: [ 7374.796000] Back to C!May 4 17:33:04 x3 kernel: [ 7382.796000] agpgart-intel 0000:00:00.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pcieport-driver 0000:00:01.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] HDA Intel 0000:00:1b.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pcieport-driver 0000:00:1c.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pcieport-driver 0000:00:1c.1: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pcieport-driver 0000:00:1c.2: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pcieport-driver 0000:00:1c.3: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] uhci_hcd 0000:00:1d.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] uhci_hcd 0000:00:1d.1: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] uhci_hcd 0000:00:1d.2: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] uhci_hcd 0000:00:1d.3: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] ehci_hcd 0000:00:1d.7: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pci 0000:00:1e.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pci 0000:00:1f.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] ata_piix 0000:00:1f.1: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] ahci 0000:00:1f.2: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pci 0000:00:1f.3: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pci 0000:01:00.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pci 0000:02:00.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pci 0000:03:00.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] yenta_cardbus 0000:15:00.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] pcspkr pcspkr: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] serial8250 serial8250: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] i8042 i8042: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] platform eisa.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] platform vesafb.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] iTCO_wdt iTCO_wdt: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] platform dock.0: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] platform bluetooth: EARLY resumeMay 4 17:33:04 x3 kernel: [ 7382.796000] PM: Finishing wakeup.May 4 17:33:04 x3 kernel: [ 7382.796000] acpi acpi: resumingMay 4 17:33:04 x3 kernel: [ 7382.796000] agpgart-intel 0000:00:00.0: resumingMay 4 17:33:04 x3 kernel: [ 7382.796000] pcieport-driver 0000:00:01.0: resumingMay 4 17:33:04 x3 kernel: [ 7382.796000] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2020, writing 20002020)May 4 17:33:04 x3 kernel: [ 7382.796000] PCI: Setting latency timer of device 0000:00:01.0 to 64May 4 17:33:04 x3 kernel: [ 7382.796000] HDA Intel 0000:00:1b.0: resumingMay 4 17:33:04 x3 kernel: [ 7382.812000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)May 4 17:33:04 x3 kernel: [ 7382.812000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21May 4 17:33:04 x3 kernel: [ 7382.812000] PCI: Setting latency timer of device 0000:00:1b.0 to 64May 4 17:33:04 x3 kernel: [ 7382.876000] pcieport-driver 0000:00:1c.0: resumingMay 4 17:33:04 x3 kernel: [ 7382.876000] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 180107, writing 100107)May 4 17:33:04 x3 kernel: [ 7382.876000] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 4 17:33:04 x3 kernel: [ 7382.876000] pcieport-driver 0000:00:1c.1: resumingMay 4 17:33:04 x3 kernel: [ 7382.876000] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 4 17:33:04 x3 kernel: [ 7382.876000] pcieport-driver 0000:00:1c.2: resumingMay 4 17:33:04 x3 kernel: [ 7382.876000] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20007060, writing 7060)May 4 17:33:04 x3 kernel: [ 7382.876000] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 4 17:33:04 x3 kernel: [ 7382.876000] pcieport-driver 0000:00:1c.3: resumingMay 4 17:33:04 x3 kernel: [ 7382.876000] PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b)May 4 17:33:04 x3 kernel: [ 7382.876000] PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421)May 4 17:33:04 x3 kernel: [ 7382.876000] PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00)May 4 17:33:04 x3 kernel: [ 7382.876000] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 9080)May 4 17:33:04 x3 kernel: [ 7382.876000] PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)May 4 17:33:04 x3 kernel: [ 7382.876000] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100107)May 4 17:33:04 x3 kernel: [ 7382.876000] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 4 17:33:04 x3 kernel: [ 7382.876000] uhci_hcd 0000:00:1d.0: resumingMay 4 17:33:04 x3 kernel: [ 7382.876000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16May 4 17:33:04 x3 kernel: [ 7382.876000] PCI: Setting latency timer of device 0000:00:1d.0 to 64May 4 17:33:04 x3 kernel: [ 7382.876000] usb usb1: root hub lost power or was resetMay 4 17:33:04 x3 kernel: [ 7382.876000] uhci_hcd 0000:00:1d.1: resumingMay 4 17:33:04 x3 kernel: [ 7382.876000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21May 4 17:33:04 x3 kernel: [ 7382.876000] PCI: Setting latency timer of device 0000:00:1d.1 to 64May 4 17:33:04 x3 kernel: [ 7382.876000] usb usb2: root hub lost power or was resetMay 4 17:33:04 x3 kernel: [ 7382.876000] uhci_hcd 0000:00:1d.2: resumingMay 4 17:33:04 x3 kernel: [ 7382.876000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22May 4 17:33:04 x3 kernel: [ 7382.876000] PCI: Setting latency timer of device 0000:00:1d.2 to 64May 4 17:33:04 x3 kernel: [ 7382.876000] usb usb3: root hub lost power or was resetMay 4 17:33:04 x3 kernel: [ 7382.876000] uhci_hcd 0000:00:1d.3: resumingMay 4 17:33:04 x3 kernel: [ 7382.876000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23May 4 17:33:04 x3 kernel: [ 7382.876000] PCI: Setting latency timer of device 0000:00:1d.3 to 64May 4 17:33:04 x3 kernel: [ 7382.876000] usb usb4: root hub lost power or was resetMay 4 17:33:04 x3 kernel: [ 7382.876000] ehci_hcd 0000:00:1d.7: resumingMay 4 17:33:04 x3 kernel: [ 7382.892000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23May 4 17:33:04 x3 kernel: [ 7382.892000] PCI: Setting latency timer of device 0000:00:1d.7 to 64May 4 17:33:04 x3 kernel: [ 7382.892000] pci 0000:00:1e.0: resumingMay 4 17:33:04 x3 kernel: [ 7382.892000] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)May 4 17:33:04 x3 kernel: [ 7382.892000] PCI: Setting latency timer of device 0000:00:1e.0 to 64May 4 17:33:04 x3 kernel: [ 7382.892000] pci 0000:00:1f.0: resumingMay 4 17:33:04 x3 kernel: [ 7382.892000] ata_piix 0000:00:1f.1: resumingMay 4 17:33:04 x3 kernel: [ 7382.892000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)May 4 17:33:04 x3 kernel: [ 7382.892000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16May 4 17:33:04 x3 kernel: [ 7382.892000] PCI: Setting latency timer of device 0000:00:1f.1 to 64May 4 17:33:04 x3 kernel: [ 7382.896000] ata6: ACPI set timing mode failed.May 4 17:33:04 x3 kernel: [ 7382.896000] ata6: port disabled. ignoring.May 4 17:33:04 x3 kernel: [ 7382.896000] ahci 0000:00:1f.2: resumingMay 4 17:33:04 x3 kernel: [ 7382.912000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16May 4 17:33:04 x3 kernel: [ 7382.912000] PCI: Setting latency timer of device 0000:00:1f.2 to 64May 4 17:33:04 x3 kernel: [ 7383.916000] pci 0000:00:1f.3: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci 0000:01:00.0: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci 0000:02:00.0: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100107, writing 100103)May 4 17:33:04 x3 kernel: [ 7383.916000] pci 0000:03:00.0: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100102)May 4 17:33:04 x3 kernel: [ 7383.916000] yenta_cardbus 0000:15:00.0: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset f (was 34001ff, writing 5c0010b)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset e (was 0, writing a4fc)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset d (was 0, writing a400)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset c (was 0, writing a0fc)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset b (was 0, writing a000)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset a (was 0, writing 33fff000)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset 9 (was 0, writing 30000000)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset 8 (was 0, writing e3fff000)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset 7 (was 0, writing e0000000)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset 6 (was 0, writing b0171615)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset 4 (was 0, writing e4300000)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 20000, writing 2a820)May 4 17:33:04 x3 kernel: [ 7383.916000] PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007)May 4 17:33:04 x3 kernel: [ 7383.916000] system 00:00: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pnp 00:01: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] system 00:02: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pnp 00:03: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pnp 00:04: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pnp 00:05: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pnp 00:06: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pnp 00:07: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] i8042 kbd 00:08: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pnp: Device 00:08 does not support activation.May 4 17:33:04 x3 kernel: [ 7383.916000] i8042 aux 00:09: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pnp: Device 00:09 does not support activation.May 4 17:33:04 x3 kernel: [ 7383.916000] pnp 00:0a: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pnp 00:0b: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pcspkr pcspkr: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci_express 0000:00:01.0:pcie00: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci_express 0000:00:1c.0:pcie00: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci_express 0000:00:1c.0:pcie02: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci_express 0000:00:1c.1:pcie00: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci_express 0000:00:1c.1:pcie02: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci_express 0000:00:1c.2:pcie00: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci_express 0000:00:1c.2:pcie02: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci_express 0000:00:1c.3:pcie00: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] pci_express 0000:00:1c.3:pcie02: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] serial8250 serial8250: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] i8042 i8042: resumingMay 4 17:33:04 x3 kernel: [ 7383.916000] atkbd serio0: resumingMay 4 17:33:04 x3 kernel: [ 7383.924000] platform eisa.0: resumingMay 4 17:33:04 x3 kernel: [ 7383.924000] psmouse serio1: resumingMay 4 17:33:04 x3 kernel: [ 7384.228000] ata2: SATA link down (SStatus 0 SControl 0)May 4 17:33:04 x3 kernel: [ 7384.228000] ata3: SATA link down (SStatus 0 SControl 0)May 4 17:33:04 x3 kernel: [ 7384.228000] ata4: SATA link down (SStatus 0 SControl 0)May 4 17:33:04 x3 kernel: [ 7384.504000] platform vesafb.0: resumingMay 4 17:33:04 x3 kernel: [ 7384.504000] usb usb1: resumingMay 4 17:33:04 x3 kernel: [ 7384.544000] hub 1-0:1.0: resumingMay 4 17:33:04 x3 kernel: [ 7384.544000] usb usb2: resumingMay 4 17:33:04 x3 kernel: [ 7384.584000] usb usb3: resumingMay 4 17:33:04 x3 kernel: [ 7384.624000] usb usb4: resumingMay 4 17:33:04 x3 kernel: [ 7384.664000] hub 4-0:1.0: resumingMay 4 17:33:04 x3 kernel: [ 7384.664000] usb usb5: resumingMay 4 17:33:04 x3 kernel: [ 7384.684000] hub 5-0:1.0: resumingMay 4 17:33:04 x3 kernel: [ 7384.684000] usb 5-2: resumingMay 4 17:33:04 x3 kernel: [ 7384.684000] usbdev5.2_ep00: PM: resume from 0, parent 5-2 still 2May 4 17:33:04 x3 kernel: [ 7384.684000] usb-storage 5-2:1.0: PM: resume from 2, parent 5-2 still 2May 4 17:33:04 x3 kernel: [ 7384.684000] usb-storage 5-2:1.0: resumingMay 4 17:33:04 x3 kernel: [ 7384.684000] usbdev5.2_ep03: PM: resume from 0, parent 5-2:1.0 still 2May 4 17:33:04 x3 kernel: [ 7384.684000] usbdev5.2_ep84: PM: resume from 0, parent 5-2:1.0 still 2May 4 17:33:04 x3 kernel: [ 7384.684000] host0: PM: resume from 0, parent 5-2:1.0 still 2May 4 17:33:04 x3 kernel: [ 7384.684000] usbdev4.2_ep00: PM: resume from 0, parent 4-2 still 2May 4 17:33:04 x3 kernel: [ 7384.684000] usbdev4.2_ep81: PM: resume from 0, parent 4-2:1.0 still 2May 4 17:33:04 x3 kernel: [ 7384.684000] usbdev4.2_ep02: PM: resume from 0, parent 4-2:1.0 still 2May 4 17:33:04 x3 kernel: [ 7384.684000] usbdev4.2_ep83: PM: resume from 0, parent 4-2:1.0 still 2May 4 17:33:04 x3 kernel: [ 7384.684000] sd 1:0:0:0: resumingMay 4 17:33:04 x3 kernel: [ 7384.684000] sr 5:0:0:0: resumingMay 4 17:33:04 x3 kernel: [ 7384.684000] ata5: soft resetting portMay 4 17:33:04 x3 kernel: [ 7384.684000] sd 0:0:0:0: resumingMay 4 17:33:04 x3 kernel: [ 7384.684000] psmouse serio2: resumingMay 4 17:33:04 x3 kernel: [ 7385.168000] ata5.00: configured for UDMA/33May 4 17:33:04 x3 kernel: [ 7385.168000] ata5: EH completeMay 4 17:33:04 x3 kernel: [ 7385.436000] ata1: waiting for device to spin up (8 secs)May 4 17:33:04 x3 kernel: [ 7387.500000] iTCO_wdt iTCO_wdt: resumingMay 4 17:33:04 x3 kernel: [ 7387.500000] platform dock.0: resumingMay 4 17:33:04 x3 kernel: [ 7387.500000] platform bluetooth: resumingMay 4 17:33:04 x3 kernel: [ 7387.500000] usb 1-1: resumingMay 4 17:33:04 x3 kernel: [ 7387.500000] usbdev1.3_ep00: PM: resume from 0, parent 1-1 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] usbhid 1-1:1.0: PM: resume from 2, parent 1-1 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] usbhid 1-1:1.0: resumingMay 4 17:33:04 x3 kernel: [ 7387.500000] usbdev1.3_ep81: PM: resume from 0, parent 1-1:1.0 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] usb 4-1: resumingMay 4 17:33:04 x3 kernel: [ 7387.500000] usbdev4.3_ep00: PM: resume from 0, parent 4-1 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] hci_usb 4-1:1.0: PM: resume from 2, parent 4-1 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] hci_usb 4-1:1.0: resumingMay 4 17:33:04 x3 kernel: [ 7387.500000] usbdev4.3_ep81: PM: resume from 0, parent 4-1:1.0 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] usbdev4.3_ep82: PM: resume from 0, parent 4-1:1.0 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] usbdev4.3_ep02: PM: resume from 0, parent 4-1:1.0 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] hci_usb 4-1:1.1: PM: resume from 2, parent 4-1 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] hci_usb 4-1:1.1: resumingMay 4 17:33:04 x3 kernel: [ 7387.500000] usb 4-1:1.2: PM: resume from 2, parent 4-1 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] usb 4-1:1.2: resumingMay 4 17:33:04 x3 kernel: [ 7387.500000] usbdev4.3_ep84: PM: resume from 0, parent 4-1:1.2 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] usbdev4.3_ep04: PM: resume from 0, parent 4-1:1.2 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] usb 4-1:1.3: PM: resume from 2, parent 4-1 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] usb 4-1:1.3: resumingMay 4 17:33:04 x3 kernel: [ 7387.500000] usbdev4.3_ep83: PM: resume from 0, parent 4-1:1.1 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] usbdev4.3_ep03: PM: resume from 0, parent 4-1:1.1 still 2May 4 17:33:04 x3 kernel: [ 7387.500000] hci0: PM: resume from 0, parent 4-1:1.0 still 2May 4 17:33:04 x3 kernel: [ 7387.504000] Restarting tasks ... <6>usb 1-1: USB disconnect, address 3May 4 17:33:04 x3 kernel: [ 7387.564000] done.May 4 17:33:04 x3 kernel: [ 7387.564000] Enabling non-boot CPUs ...May 4 17:33:04 x3 kernel: [ 7387.612000] SMP alternatives: switching to SMP codeMay 4 17:33:04 x3 kernel: [ 7387.612000] Booting processor 1/1 eip 3000May 4 17:33:04 x3 kernel: [ 7387.620000] Initializing CPU#1May 4 17:33:04 x3 kernel: [ 7387.700000] Calibrating delay using timer specific routine.. 3990.17 BogoMIPS (lpj=7980354)May 4 17:33:04 x3 kernel: [ 7387.700000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 4 17:33:04 x3 kernel: [ 7387.700000] monitor/mwait feature present.May 4 17:33:04 x3 kernel: [ 7387.700000] CPU: L1 I cache: 32K, L1 D cache: 32KMay 4 17:33:04 x3 kernel: [ 7387.700000] CPU: L2 cache: 2048KMay 4 17:33:04 x3 kernel: [ 7387.700000] CPU: Physical Processor ID: 0May 4 17:33:04 x3 kernel: [ 7387.700000] CPU: Processor Core ID: 1May 4 17:33:04 x3 kernel: [ 7387.700000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 4 17:33:04 x3 kernel: [ 7387.700000] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 4 17:33:04 x3 kernel: [ 7387.700000] usb 4-1: USB disconnect, address 3May 4 17:33:04 x3 kernel: [ 7387.704000] CPU1 is upMay 4 17:33:04 x3 kernel: [ 7388.080000] usb 4-2: USB disconnect, address 2May 4 17:33:05 x3 kernel: [ 7388.392000] usb 5-2: USB disconnect, address 2May 4 17:33:05 x3 kernel: [ 7388.648000] usb 5-2: new high speed USB device using ehci_hcd and address 7May 4 17:33:05 x3 kernel: [ 7388.780000] usb 5-2: configuration #1 chosen from 1 choiceMay 4 17:33:05 x3 kernel: [ 7388.780000] scsi7 : SCSI emulation for USB Mass Storage devicesMay 4 17:33:05 x3 kernel: [ 7388.780000] usb-storage: device found at 7May 4 17:33:05 x3 kernel: [ 7388.780000] usb-storage: waiting for device to settle before scanningMay 4 17:33:11 x3 kernel: [ 7389.388000] usb 1-1: new low speed USB device using uhci_hcd and address 4May 4 17:33:11 x3 kernel: [ 7389.540000] usb 1-1: configuration #1 chosen from 1 choiceMay 4 17:33:11 x3 kernel: [ 7389.556000] input: HID 04b3:3107 as /class/input/input10May 4 17:33:11 x3 kernel: [ 7389.556000] input: USB HID v1.00 Mouse [HID 04b3:3107] on usb-0000:00:1d.0-1May 4 17:33:11 x3 kernel: [ 7389.796000] usb 4-1: new full speed USB device using uhci_hcd and address 4May 4 17:33:11 x3 kernel: [ 7389.968000] usb 4-1: configuration #1 chosen from 1 choiceMay 4 17:33:11 x3 kernel: [ 7390.216000] usb 4-2: new full speed USB device using uhci_hcd and address 5May 4 17:33:11 x3 kernel: [ 7390.392000] usb 4-2: configuration #1 chosen from 1 choiceMay 4 17:33:11 x3 kernel: [ 7392.984000] usb 4-1: USB disconnect, address 4May 4 17:33:11 x3 kernel: [ 7393.572000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)May 4 17:33:11 x3 kernel: [ 7393.572000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 4 17:33:11 x3 kernel: [ 7393.780000] usb-storage: device scan completeMay 4 17:33:11 x3 kernel: [ 7393.780000] scsi 7:0:0:0: Direct-Access TOSHIBA MK8025GAS KA02 PQ: 0 ANSI: 0 CCSMay 4 17:33:11 x3 kernel: [ 7393.792000] SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)May 4 17:33:11 x3 kernel: [ 7393.796000] sdc: Write Protect is offMay 4 17:33:11 x3 kernel: [ 7393.796000] sdc: Mode Sense: 00 14 00 00May 4 17:33:11 x3 kernel: [ 7393.796000] sdc: assuming drive cache: write throughMay 4 17:33:11 x3 kernel: [ 7393.800000] SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)May 4 17:33:11 x3 kernel: [ 7393.800000] sdc: Write Protect is offMay 4 17:33:11 x3 kernel: [ 7393.800000] sdc: Mode Sense: 00 14 00 00May 4 17:33:11 x3 kernel: [ 7393.800000] sdc: assuming drive cache: write throughMay 4 17:33:11 x3 kernel: [ 7393.804000] sdc: sdc1 sdc2May 4 17:33:11 x3 kernel: [ 7393.860000] sd 7:0:0:0: Attached scsi disk sdcMay 4 17:33:11 x3 kernel: [ 7393.860000] sd 7:0:0:0: Attached scsi generic sg2 type 0May 4 17:33:11 x3 kernel: [ 7393.900000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 4 17:33:11 x3 kernel: [ 7393.900000] ata1.00: configured for UDMA/100May 4 17:33:11 x3 kernel: [ 7393.932000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 4 17:33:11 x3 kernel: [ 7393.944000] sda: Write Protect is offMay 4 17:33:11 x3 kernel: [ 7393.944000] sda: Mode Sense: 00 3a 00 00May 4 17:33:11 x3 kernel: [ 7393.944000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 4 17:33:12 x3 kernel: [ 7395.388000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPIMay 4 17:33:12 x3 kernel: [ 7395.388000] Copyright (c) 1999-2006 Intel Corporation.May 4 17:33:12 x3 kernel: [ 7395.388000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 4 17:33:12 x3 kernel: [ 7395.388000] PCI: Setting latency timer of device 0000:02:00.0 to 64May 4 17:33:12 x3 kernel: [ 7395.448000] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:58:30:f7:c3May 4 17:33:12 x3 kernel: [ 7395.508000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network ConnectionMay 4 17:33:12 x3 kernel: [ 7395.588000] ieee80211_crypt: registered algorithm 'NULL'May 4 17:33:12 x3 kernel: [ 7395.592000] ieee80211: 802.11 data/management/control stack, git-1.1.13May 4 17:33:12 x3 kernel: [ 7395.592000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>May 4 17:33:12 x3 kernel: [ 7395.616000] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22May 4 17:33:12 x3 kernel: [ 7395.616000] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 4 17:33:12 x3 kernel: [ 7395.644000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpMay 4 17:33:12 x3 kernel: [ 7395.644000] ipw3945: Copyright(c) 2003-2006 Intel CorporationMay 4 17:33:12 x3 kernel: [ 7395.644000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21May 4 17:33:12 x3 kernel: [ 7395.644000] PCI: Setting latency timer of device 0000:03:00.0 to 64May 4 17:33:12 x3 kernel: [ 7395.644000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionMay 4 20:33:13 x3 kernel: [ 7396.400000] input: Power Button (FF) as /class/input/input11May 4 20:33:13 x3 kernel: [ 7396.400000] ACPI: Power Button (FF) [PWRF]May 4 20:33:13 x3 kernel: [ 7396.412000] input: Lid Switch as /class/input/input12May 4 20:33:13 x3 kernel: [ 7396.412000] ACPI: Lid Switch [LID]May 4 20:33:13 x3 kernel: [ 7396.412000] input: Sleep Button (CM) as /class/input/input13May 4 20:33:13 x3 kernel: [ 7396.412000] ACPI: Sleep Button (CM) [SLPB]May 4 20:33:13 x3 kernel: [ 7396.628000] ACPI: Thermal Zone [THM0] (55 C)May 4 20:33:13 x3 kernel: [ 7396.628000] ACPI: Thermal Zone [THM1] (58 C)May 4 20:33:13 x3 kernel: [ 7396.668000] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07May 4 20:33:13 x3 kernel: [ 7396.668000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13May 4 20:33:13 x3 kernel: [ 7396.668000] ibm_acpi: http://ibm-acpi.sf.net/May 4 20:33:13 x3 kernel: [ 7396.720000] ACPI: AC Adapter [AC] (on-line)May 4 20:33:13 x3 kernel: [ 7396.744000] ACPI: Battery Slot [BAT0] (battery present)May 4 20:33:13 x3 kernel: [ 7396.996000] usb 4-1: new full speed USB device using uhci_hcd and address 6May 4 20:33:13 x3 kernel: [ 7397.164000] usb 4-1: configuration #1 chosen from 1 choiceMay 4 20:33:14 x3 kernel: [ 7397.500000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)May 4 20:33:14 x3 kernel: [ 7397.756000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 4 20:33:43 x3 kernel: [ 7426.264000] usb 5-2: USB disconnect, address 7May 4 20:33:53 x3 kernel: [ 7436.640000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 4 20:33:53 x3 kernel: [ 7436.700000] ACPI: PCI interrupt for device 0000:03:00.0 disabledMay 4 20:33:53 x3 kernel: [ 7436.708000] ieee80211_crypt: unregistered algorithm 'NULL'May 4 20:33:55 x3 kernel: [ 7438.388000] PM: Preparing system for mem sleepMay 4 20:33:55 x3 kernel: [ 7438.388000] Disabling non-boot CPUs ...May 4 20:33:55 x3 kernel: [ 7438.612000] CPU 1 is now offlineMay 4 20:33:55 x3 kernel: [ 7438.612000] SMP alternatives: switching to UP codeMay 5 00:08:39 x3 kernel: [ 7438.612000] CPU1 is downMay 5 00:08:39 x3 kernel: [ 7438.612000] Stopping tasks ... done.May 5 00:08:39 x3 kernel: [ 7439.324000] Suspending console(s)May 5 00:08:39 x3 kernel: [ 7439.324000] usb 4-1:1.3: suspendMay 5 00:08:39 x3 kernel: [ 7439.324000] usb 4-1:1.2: suspendMay 5 00:08:39 x3 kernel: [ 7439.324000] hci_usb 4-1:1.1: suspendMay 5 00:08:39 x3 kernel: [ 7439.324000] hci_usb 4-1:1.0: suspendMay 5 00:08:39 x3 kernel: [ 7439.324000] usb 4-1: suspend, may wakeupMay 5 00:08:39 x3 kernel: [ 7439.348000] usbdev4.5_ep83: PM: suspend 0->2, parent 4-2:1.0 already 2May 5 00:08:39 x3 kernel: [ 7439.348000] usbdev4.5_ep02: PM: suspend 0->2, parent 4-2:1.0 already 2May 5 00:08:39 x3 kernel: [ 7439.348000] usbdev4.5_ep81: PM: suspend 0->2, parent 4-2:1.0 already 2May 5 00:08:39 x3 kernel: [ 7439.348000] usb 4-2:1.0: PM: suspend 2-->2May 5 00:08:39 x3 kernel: [ 7439.348000] usb 4-2:1.0: PM: suspend 2->2, parent 4-2 already 2May 5 00:08:39 x3 kernel: [ 7439.348000] usbdev4.5_ep00: PM: suspend 0->2, parent 4-2 already 2May 5 00:08:39 x3 kernel: [ 7439.348000] usb 4-2: PM: suspend 2-->2May 5 00:08:39 x3 kernel: [ 7439.348000] usbhid 1-1:1.0: suspendMay 5 00:08:39 x3 kernel: [ 7439.348000] usb 1-1: suspend, may wakeupMay 5 00:08:39 x3 kernel: [ 7439.364000] platform bluetooth: suspendMay 5 00:08:39 x3 kernel: [ 7439.364000] platform dock.0: suspendMay 5 00:08:39 x3 kernel: [ 7439.364000] iTCO_wdt iTCO_wdt: suspendMay 5 00:08:39 x3 kernel: [ 7439.364000] sr 5:0:0:0: suspendMay 5 00:08:39 x3 kernel: [ 7439.364000] sd 1:0:0:0: suspendMay 5 00:08:39 x3 kernel: [ 7440.048000] usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2May 5 00:08:39 x3 kernel: [ 7440.048000] hub 5-0:1.0: PM: suspend 2-->2May 5 00:08:39 x3 kernel: [ 7440.048000] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2May 5 00:08:39 x3 kernel: [ 7440.048000] usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2May 5 00:08:39 x3 kernel: [ 7440.048000] usb usb5: PM: suspend 2-->2May 5 00:08:39 x3 kernel: [ 7440.048000] hub 4-0:1.0: suspendMay 5 00:08:39 x3 kernel: [ 7440.048000] usb usb4: suspend, may wakeupMay 5 00:08:39 x3 kernel: [ 7440.048000] usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2May 5 00:08:39 x3 kernel: [ 7440.048000] hub 3-0:1.0: PM: suspend 2-->2May 5 00:08:39 x3 kernel: [ 7440.048000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2May 5 00:08:39 x3 kernel: [ 7440.048000] usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2May 5 00:08:39 x3 kernel: [ 7440.048000] usb usb3: PM: suspend 2-->2May 5 00:08:39 x3 kernel: [ 7440.048000] usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2May 5 00:08:39 x3 kernel: [ 7440.048000] hub 2-0:1.0: PM: suspend 2-->2May 5 00:08:39 x3 kernel: [ 7440.048000] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2May 5 00:08:39 x3 kernel: [ 7440.048000] usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2May 5 00:08:39 x3 kernel: [ 7440.048000] usb usb2: PM: suspend 2-->2May 5 00:08:39 x3 kernel: [ 7440.048000] hub 1-0:1.0: suspendMay 5 00:08:39 x3 kernel: [ 7440.048000] usb usb1: suspend, may wakeupMay 5 00:08:39 x3 kernel: [ 7440.048000] platform vesafb.0: suspendMay 5 00:08:39 x3 kernel: [ 7440.048000] platform eisa.0: suspendMay 5 00:08:39 x3 kernel: [ 7440.048000] i8042 i8042: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] serial8250 serial8250: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci_express 0000:00:1c.3:pcie02: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci_express 0000:00:1c.3:pcie00: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci_express 0000:00:1c.2:pcie02: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci_express 0000:00:1c.2:pcie00: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci_express 0000:00:1c.1:pcie02: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci_express 0000:00:1c.1:pcie00: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci_express 0000:00:1c.0:pcie02: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci_express 0000:00:1c.0:pcie00: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci_express 0000:00:01.0:pcie00: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pcspkr pcspkr: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pnp 00:0b: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pnp 00:0a: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] i8042 aux 00:09: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] i8042 kbd 00:08: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pnp 00:07: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pnp 00:06: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pnp 00:05: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pnp 00:04: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pnp 00:03: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] system 00:02: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pnp 00:01: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] system 00:00: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] yenta_cardbus 0000:15:00.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci 0000:03:00.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci 0000:02:00.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci 0000:01:00.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] pci 0000:00:1f.3: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] ahci 0000:00:1f.2: suspendMay 5 00:08:39 x3 kernel: [ 7441.028000] ACPI: PCI interrupt for device 0000:00:1f.2 disabledMay 5 00:08:39 x3 kernel: [ 7441.044000] ata_piix 0000:00:1f.1: suspendMay 5 00:08:39 x3 kernel: [ 7441.044000] ata6: ACPI get timing mode failed.May 5 00:08:39 x3 kernel: [ 7441.044000] ACPI: PCI interrupt for device 0000:00:1f.1 disabledMay 5 00:08:39 x3 kernel: [ 7441.044000] pci_set_power_state(): 0000:00:1f.1: state=3, current state=5May 5 00:08:39 x3 kernel: [ 7441.044000] pci 0000:00:1f.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.044000] pci 0000:00:1e.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.044000] ehci_hcd 0000:00:1d.7: suspend, may wakeupMay 5 00:08:39 x3 kernel: [ 7441.044000] ACPI: PCI interrupt for device 0000:00:1d.7 disabledMay 5 00:08:39 x3 kernel: [ 7441.060000] uhci_hcd 0000:00:1d.3: suspendMay 5 00:08:39 x3 kernel: [ 7441.060000] ACPI: PCI interrupt for device 0000:00:1d.3 disabledMay 5 00:08:39 x3 kernel: [ 7441.060000] uhci_hcd 0000:00:1d.2: suspendMay 5 00:08:39 x3 kernel: [ 7441.060000] ACPI: PCI interrupt for device 0000:00:1d.2 disabledMay 5 00:08:39 x3 kernel: [ 7441.060000] uhci_hcd 0000:00:1d.1: suspendMay 5 00:08:39 x3 kernel: [ 7441.060000] ACPI: PCI interrupt for device 0000:00:1d.1 disabledMay 5 00:08:39 x3 kernel: [ 7441.060000] uhci_hcd 0000:00:1d.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.060000] ACPI: PCI interrupt for device 0000:00:1d.0 disabledMay 5 00:08:39 x3 kernel: [ 7441.060000] pcieport-driver 0000:00:1c.3: suspendMay 5 00:08:39 x3 kernel: [ 7441.060000] pcieport-driver 0000:00:1c.2: suspendMay 5 00:08:39 x3 kernel: [ 7441.060000] pcieport-driver 0000:00:1c.1: suspendMay 5 00:08:39 x3 kernel: [ 7441.060000] pcieport-driver 0000:00:1c.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.060000] HDA Intel 0000:00:1b.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.068000] ACPI: PCI interrupt for device 0000:00:1b.0 disabledMay 5 00:08:39 x3 kernel: [ 7441.084000] pcieport-driver 0000:00:01.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] agpgart-intel 0000:00:00.0: suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] acpi acpi: suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] PM: Entering mem sleepMay 5 00:08:39 x3 kernel: [ 7441.084000] platform bluetooth: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] platform dock.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] iTCO_wdt iTCO_wdt: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] platform vesafb.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] platform eisa.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] i8042 i8042: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] serial8250 serial8250: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pcspkr pcspkr: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] yenta_cardbus 0000:15:00.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pci 0000:03:00.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pci 0000:02:00.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pci 0000:01:00.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pci 0000:00:1f.3: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pci 0000:00:1f.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pci 0000:00:1e.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pcieport-driver 0000:00:1c.3: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pcieport-driver 0000:00:1c.2: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pcieport-driver 0000:00:1c.1: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pcieport-driver 0000:00:1c.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] HDA Intel 0000:00:1b.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] pcieport-driver 0000:00:01.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] agpgart-intel 0000:00:00.0: LATE suspendMay 5 00:08:39 x3 kernel: [ 7441.084000] Back to C!May 5 00:08:39 x3 kernel: [20320.084000] agpgart-intel 0000:00:00.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pcieport-driver 0000:00:01.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] HDA Intel 0000:00:1b.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pcieport-driver 0000:00:1c.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pcieport-driver 0000:00:1c.1: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pcieport-driver 0000:00:1c.2: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pcieport-driver 0000:00:1c.3: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] uhci_hcd 0000:00:1d.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] uhci_hcd 0000:00:1d.1: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] uhci_hcd 0000:00:1d.2: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] uhci_hcd 0000:00:1d.3: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] ehci_hcd 0000:00:1d.7: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pci 0000:00:1e.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pci 0000:00:1f.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] ata_piix 0000:00:1f.1: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] ahci 0000:00:1f.2: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pci 0000:00:1f.3: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pci 0000:01:00.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pci 0000:02:00.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pci 0000:03:00.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] yenta_cardbus 0000:15:00.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] pcspkr pcspkr: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] serial8250 serial8250: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] i8042 i8042: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] platform eisa.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] platform vesafb.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] iTCO_wdt iTCO_wdt: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] platform dock.0: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] platform bluetooth: EARLY resumeMay 5 00:08:39 x3 kernel: [20320.084000] PM: Finishing wakeup.May 5 00:08:39 x3 kernel: [20320.084000] acpi acpi: resumingMay 5 00:08:39 x3 kernel: [20320.084000] agpgart-intel 0000:00:00.0: resumingMay 5 00:08:39 x3 kernel: [20320.084000] pcieport-driver 0000:00:01.0: resumingMay 5 00:08:39 x3 kernel: [20320.084000] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2020, writing 20002020)May 5 00:08:39 x3 kernel: [20320.084000] PCI: Setting latency timer of device 0000:00:01.0 to 64May 5 00:08:39 x3 kernel: [20320.084000] HDA Intel 0000:00:1b.0: resumingMay 5 00:08:39 x3 kernel: [20320.100000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)May 5 00:08:39 x3 kernel: [20320.100000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21May 5 00:08:39 x3 kernel: [20320.100000] PCI: Setting latency timer of device 0000:00:1b.0 to 64May 5 00:08:39 x3 kernel: [20320.164000] pcieport-driver 0000:00:1c.0: resumingMay 5 00:08:39 x3 kernel: [20320.164000] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 180107, writing 100107)May 5 00:08:39 x3 kernel: [20320.164000] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 5 00:08:39 x3 kernel: [20320.164000] pcieport-driver 0000:00:1c.1: resumingMay 5 00:08:39 x3 kernel: [20320.164000] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 5 00:08:39 x3 kernel: [20320.164000] pcieport-driver 0000:00:1c.2: resumingMay 5 00:08:39 x3 kernel: [20320.164000] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 5 00:08:39 x3 kernel: [20320.164000] pcieport-driver 0000:00:1c.3: resumingMay 5 00:08:39 x3 kernel: [20320.164000] PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b)May 5 00:08:39 x3 kernel: [20320.164000] PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421)May 5 00:08:39 x3 kernel: [20320.164000] PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00)May 5 00:08:39 x3 kernel: [20320.164000] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20009080)May 5 00:08:39 x3 kernel: [20320.164000] PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)May 5 00:08:39 x3 kernel: [20320.164000] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100107)May 5 00:08:39 x3 kernel: [20320.164000] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 5 00:08:39 x3 kernel: [20320.164000] uhci_hcd 0000:00:1d.0: resumingMay 5 00:08:39 x3 kernel: [20320.164000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16May 5 00:08:39 x3 kernel: [20320.164000] PCI: Setting latency timer of device 0000:00:1d.0 to 64May 5 00:08:39 x3 kernel: [20320.164000] usb usb1: root hub lost power or was resetMay 5 00:08:39 x3 kernel: [20320.164000] uhci_hcd 0000:00:1d.1: resumingMay 5 00:08:39 x3 kernel: [20320.164000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21May 5 00:08:39 x3 kernel: [20320.164000] PCI: Setting latency timer of device 0000:00:1d.1 to 64May 5 00:08:39 x3 kernel: [20320.164000] usb usb2: root hub lost power or was resetMay 5 00:08:39 x3 kernel: [20320.164000] uhci_hcd 0000:00:1d.2: resumingMay 5 00:08:39 x3 kernel: [20320.164000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22May 5 00:08:39 x3 kernel: [20320.164000] PCI: Setting latency timer of device 0000:00:1d.2 to 64May 5 00:08:39 x3 kernel: [20320.164000] usb usb3: root hub lost power or was resetMay 5 00:08:39 x3 kernel: [20320.164000] uhci_hcd 0000:00:1d.3: resumingMay 5 00:08:39 x3 kernel: [20320.164000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23May 5 00:08:39 x3 kernel: [20320.164000] PCI: Setting latency timer of device 0000:00:1d.3 to 64May 5 00:08:39 x3 kernel: [20320.164000] usb usb4: root hub lost power or was resetMay 5 00:08:39 x3 kernel: [20320.164000] ehci_hcd 0000:00:1d.7: resumingMay 5 00:08:39 x3 kernel: [20320.180000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23May 5 00:08:39 x3 kernel: [20320.180000] PCI: Setting latency timer of device 0000:00:1d.7 to 64May 5 00:08:39 x3 kernel: [20320.180000] pci 0000:00:1e.0: resumingMay 5 00:08:39 x3 kernel: [20320.180000] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)May 5 00:08:39 x3 kernel: [20320.180000] PCI: Setting latency timer of device 0000:00:1e.0 to 64May 5 00:08:39 x3 kernel: [20320.180000] pci 0000:00:1f.0: resumingMay 5 00:08:39 x3 kernel: [20320.180000] ata_piix 0000:00:1f.1: resumingMay 5 00:08:39 x3 kernel: [20320.180000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005)May 5 00:08:39 x3 kernel: [20320.180000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16May 5 00:08:39 x3 kernel: [20320.180000] PCI: Setting latency timer of device 0000:00:1f.1 to 64May 5 00:08:39 x3 kernel: [20320.184000] ata6: ACPI set timing mode failed.May 5 00:08:39 x3 kernel: [20320.184000] ata6: port disabled. ignoring.May 5 00:08:39 x3 kernel: [20320.184000] ahci 0000:00:1f.2: resumingMay 5 00:08:39 x3 kernel: [20320.200000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16May 5 00:08:39 x3 kernel: [20320.200000] PCI: Setting latency timer of device 0000:00:1f.2 to 64May 5 00:08:39 x3 kernel: [20321.204000] pci 0000:00:1f.3: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci 0000:01:00.0: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci 0000:02:00.0: resumingMay 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100107, writing 100103)May 5 00:08:39 x3 kernel: [20321.204000] pci 0000:03:00.0: resumingMay 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100102)May 5 00:08:39 x3 kernel: [20321.204000] yenta_cardbus 0000:15:00.0: resumingMay 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset f (was 34001ff, writing 5c0010b)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset e (was 0, writing a4fc)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset d (was 0, writing a400)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset c (was 0, writing a0fc)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset b (was 0, writing a000)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset a (was 0, writing 33fff000)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset 9 (was 0, writing 30000000)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset 8 (was 0, writing e3fff000)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset 7 (was 0, writing e0000000)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset 6 (was 0, writing b0171615)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset 4 (was 0, writing e4300000)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 20000, writing 2a820)May 5 00:08:39 x3 kernel: [20321.204000] PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007)May 5 00:08:39 x3 kernel: [20321.204000] system 00:00: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pnp 00:01: resumingMay 5 00:08:39 x3 kernel: [20321.204000] system 00:02: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pnp 00:03: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pnp 00:04: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pnp 00:05: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pnp 00:06: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pnp 00:07: resumingMay 5 00:08:39 x3 kernel: [20321.204000] i8042 kbd 00:08: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pnp: Device 00:08 does not support activation.May 5 00:08:39 x3 kernel: [20321.204000] i8042 aux 00:09: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pnp: Device 00:09 does not support activation.May 5 00:08:39 x3 kernel: [20321.204000] pnp 00:0a: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pnp 00:0b: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pcspkr pcspkr: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci_express 0000:00:01.0:pcie00: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci_express 0000:00:1c.0:pcie00: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci_express 0000:00:1c.0:pcie02: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci_express 0000:00:1c.1:pcie00: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci_express 0000:00:1c.1:pcie02: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci_express 0000:00:1c.2:pcie00: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci_express 0000:00:1c.2:pcie02: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci_express 0000:00:1c.3:pcie00: resumingMay 5 00:08:39 x3 kernel: [20321.204000] pci_express 0000:00:1c.3:pcie02: resumingMay 5 00:08:39 x3 kernel: [20321.204000] serial8250 serial8250: resumingMay 5 00:08:39 x3 kernel: [20321.204000] i8042 i8042: resumingMay 5 00:08:39 x3 kernel: [20321.204000] atkbd serio0: resumingMay 5 00:08:39 x3 kernel: [20321.212000] platform eisa.0: resumingMay 5 00:08:39 x3 kernel: [20321.212000] psmouse serio1: resumingMay 5 00:08:39 x3 kernel: [20321.516000] ata2: SATA link down (SStatus 0 SControl 0)May 5 00:08:39 x3 kernel: [20321.516000] ata3: SATA link down (SStatus 0 SControl 0)May 5 00:08:39 x3 kernel: [20321.516000] ata4: SATA link down (SStatus 0 SControl 0)May 5 00:08:39 x3 kernel: [20321.788000] platform vesafb.0: resumingMay 5 00:08:39 x3 kernel: [20321.788000] usb usb1: resumingMay 5 00:08:39 x3 kernel: [20321.828000] hub 1-0:1.0: resumingMay 5 00:08:39 x3 kernel: [20321.828000] usb usb2: resumingMay 5 00:08:39 x3 kernel: [20321.868000] usb usb3: resumingMay 5 00:08:39 x3 kernel: [20321.908000] usb usb4: resumingMay 5 00:08:39 x3 kernel: [20321.948000] hub 4-0:1.0: resumingMay 5 00:08:39 x3 kernel: [20321.948000] usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2May 5 00:08:39 x3 kernel: [20321.948000] usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2May 5 00:08:39 x3 kernel: [20321.948000] sd 1:0:0:0: resumingMay 5 00:08:39 x3 kernel: [20321.948000] sr 5:0:0:0: resumingMay 5 00:08:39 x3 kernel: [20321.948000] ata5: soft resetting portMay 5 00:08:39 x3 kernel: [20321.948000] psmouse serio2: resumingMay 5 00:08:39 x3 kernel: [20322.432000] ata5.00: configured for UDMA/33May 5 00:08:39 x3 kernel: [20322.432000] ata5: EH completeMay 5 00:08:39 x3 kernel: [20322.724000] ata1: waiting for device to spin up (8 secs)May 5 00:08:39 x3 kernel: [20324.664000] iTCO_wdt iTCO_wdt: resumingMay 5 00:08:39 x3 kernel: [20324.664000] platform dock.0: resumingMay 5 00:08:39 x3 kernel: [20324.664000] platform bluetooth: resumingMay 5 00:08:39 x3 kernel: [20324.664000] usb 1-1: resumingMay 5 00:08:39 x3 kernel: [20324.664000] usbdev1.4_ep00: PM: resume from 0, parent 1-1 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbhid 1-1:1.0: PM: resume from 2, parent 1-1 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbhid 1-1:1.0: resumingMay 5 00:08:39 x3 kernel: [20324.664000] usbdev1.4_ep81: PM: resume from 0, parent 1-1:1.0 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbdev4.5_ep00: PM: resume from 0, parent 4-2 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbdev4.5_ep81: PM: resume from 0, parent 4-2:1.0 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbdev4.5_ep02: PM: resume from 0, parent 4-2:1.0 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbdev4.5_ep83: PM: resume from 0, parent 4-2:1.0 still 2May 5 00:08:39 x3 kernel: [20324.664000] usb 4-1: resumingMay 5 00:08:39 x3 kernel: [20324.664000] usbdev4.6_ep00: PM: resume from 0, parent 4-1 still 2May 5 00:08:39 x3 kernel: [20324.664000] hci_usb 4-1:1.0: PM: resume from 2, parent 4-1 still 2May 5 00:08:39 x3 kernel: [20324.664000] hci_usb 4-1:1.0: resumingMay 5 00:08:39 x3 kernel: [20324.664000] hci0: PM: resume from 0, parent 4-1:1.0 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbdev4.6_ep81: PM: resume from 0, parent 4-1:1.0 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbdev4.6_ep82: PM: resume from 0, parent 4-1:1.0 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbdev4.6_ep02: PM: resume from 0, parent 4-1:1.0 still 2May 5 00:08:39 x3 kernel: [20324.664000] hci_usb 4-1:1.1: PM: resume from 2, parent 4-1 still 2May 5 00:08:39 x3 kernel: [20324.664000] hci_usb 4-1:1.1: resumingMay 5 00:08:39 x3 kernel: [20324.664000] usbdev4.6_ep83: PM: resume from 0, parent 4-1:1.1 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbdev4.6_ep03: PM: resume from 0, parent 4-1:1.1 still 2May 5 00:08:39 x3 kernel: [20324.664000] usb 4-1:1.2: PM: resume from 2, parent 4-1 still 2May 5 00:08:39 x3 kernel: [20324.664000] usb 4-1:1.2: resumingMay 5 00:08:39 x3 kernel: [20324.664000] usbdev4.6_ep84: PM: resume from 0, parent 4-1:1.2 still 2May 5 00:08:39 x3 kernel: [20324.664000] usbdev4.6_ep04: PM: resume from 0, parent 4-1:1.2 still 2May 5 00:08:39 x3 kernel: [20324.664000] usb 4-1:1.3: PM: resume from 2, parent 4-1 still 2May 5 00:08:39 x3 kernel: [20324.664000] usb 4-1:1.3: resumingMay 5 00:08:39 x3 kernel: [20324.664000] Restarting tasks ... <6>usb 1-1: USB disconnect, address 4May 5 00:08:39 x3 kernel: [20324.776000] done.May 5 00:08:39 x3 kernel: [20324.776000] Enabling non-boot CPUs ...May 5 00:08:39 x3 kernel: [20324.788000] SMP alternatives: switching to SMP codeMay 5 00:08:39 x3 kernel: [20324.788000] Booting processor 1/1 eip 3000May 5 00:08:39 x3 kernel: [20324.800000] Initializing CPU#1May 5 00:08:39 x3 kernel: [20324.880000] Calibrating delay using timer specific routine.. 3990.24 BogoMIPS (lpj=7980482)May 5 00:08:39 x3 kernel: [20324.880000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 5 00:08:39 x3 kernel: [20324.880000] monitor/mwait feature present.May 5 00:08:39 x3 kernel: [20324.880000] CPU: L1 I cache: 32K, L1 D cache: 32KMay 5 00:08:39 x3 kernel: [20324.880000] CPU: L2 cache: 2048KMay 5 00:08:39 x3 kernel: [20324.880000] CPU: Physical Processor ID: 0May 5 00:08:39 x3 kernel: [20324.880000] CPU: Processor Core ID: 1May 5 00:08:39 x3 kernel: [20324.880000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 5 00:08:39 x3 kernel: [20324.880000] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 5 00:08:39 x3 kernel: [20324.880000] usb 4-1: USB disconnect, address 6May 5 00:08:39 x3 kernel: [20324.888000] CPU1 is upMay 5 00:08:40 x3 kernel: [20325.260000] usb 4-2: USB disconnect, address 5May 5 00:08:40 x3 kernel: [20326.016000] usb 4-1: new full speed USB device using uhci_hcd and address 7May 5 00:08:41 x3 kernel: [20326.168000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPIMay 5 00:08:41 x3 kernel: [20326.168000] Copyright (c) 1999-2006 Intel Corporation.May 5 00:08:41 x3 kernel: [20326.168000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 5 00:08:41 x3 kernel: [20326.168000] PCI: Setting latency timer of device 0000:02:00.0 to 64May 5 00:08:41 x3 kernel: [20326.188000] usb 4-1: configuration #1 chosen from 1 choiceMay 5 00:08:41 x3 kernel: [20326.380000] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:58:30:f7:c3May 5 00:08:41 x3 kernel: [20326.440000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network ConnectionMay 5 00:08:41 x3 kernel: [20326.444000] ieee80211_crypt: registered algorithm 'NULL'May 5 00:08:41 x3 kernel: [20326.444000] ieee80211: 802.11 data/management/control stack, git-1.1.13May 5 00:08:41 x3 kernel: [20326.444000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>May 5 00:08:41 x3 kernel: [20326.448000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpMay 5 00:08:41 x3 kernel: [20326.448000] ipw3945: Copyright(c) 2003-2006 Intel CorporationMay 5 00:08:41 x3 kernel: [20326.448000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21May 5 00:08:41 x3 kernel: [20326.448000] PCI: Setting latency timer of device 0000:03:00.0 to 64May 5 00:08:41 x3 kernel: [20326.448000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionMay 5 00:08:41 x3 kernel: [20326.488000] usb 4-2: new full speed USB device using uhci_hcd and address 8May 5 00:08:41 x3 kernel: [20326.560000] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22May 5 00:08:41 x3 kernel: [20326.560000] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 5 00:08:41 x3 kernel: [20326.660000] usb 4-2: configuration #1 chosen from 1 choiceMay 5 00:08:44 x3 kernel: [20327.152000] input: Power Button (FF) as /class/input/input14May 5 00:08:44 x3 kernel: [20327.152000] ACPI: Power Button (FF) [PWRF]May 5 00:08:44 x3 kernel: [20327.180000] input: Lid Switch as /class/input/input15May 5 00:08:44 x3 kernel: [20327.180000] ACPI: Lid Switch [LID]May 5 00:08:44 x3 kernel: [20327.180000] input: Sleep Button (CM) as /class/input/input16May 5 00:08:44 x3 kernel: [20327.180000] ACPI: Sleep Button (CM) [SLPB]May 5 00:08:44 x3 kernel: [20327.276000] ACPI: Thermal Zone [THM0] (38 C)May 5 00:08:44 x3 kernel: [20327.276000] ACPI: Thermal Zone [THM1] (37 C)May 5 00:08:44 x3 kernel: [20327.300000] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07May 5 00:08:44 x3 kernel: [20327.300000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13May 5 00:08:44 x3 kernel: [20327.300000] ibm_acpi: http://ibm-acpi.sf.net/May 5 00:08:44 x3 kernel: [20327.400000] ACPI: AC Adapter [AC] (on-line)May 5 00:08:44 x3 kernel: [20327.424000] ACPI: Battery Slot [BAT0] (battery present)May 5 00:08:45 x3 kernel: [20328.260000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)May 5 00:08:45 x3 kernel: [20328.544000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 5 00:08:48 x3 kernel: [20330.836000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)May 5 00:08:48 x3 kernel: [20330.836000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 5 00:08:48 x3 kernel: [20331.236000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 5 00:08:48 x3 kernel: [20331.236000] ata1.00: configured for UDMA/100May 5 00:08:48 x3 kernel: [20331.236000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 5 00:08:48 x3 kernel: [20331.236000] sda: Write Protect is offMay 5 00:08:48 x3 kernel: [20331.236000] sda: Mode Sense: 00 3a 00 00May 5 00:08:48 x3 kernel: [20331.240000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 5 21:39:43 x3 kernel: [22198.848000] usb 4-1: USB disconnect, address 7May 5 21:53:47 x3 kernel: [23042.428000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 5 21:53:47 x3 kernel: [23042.652000] ACPI: PCI interrupt for device 0000:03:00.0 disabledMay 5 21:53:47 x3 kernel: [23042.684000] ieee80211_crypt: unregistered algorithm 'NULL'May 5 21:53:49 x3 kernel: [23044.436000] PM: suspend-to-disk mode set to 'shutdown'May 5 21:53:49 x3 kernel: [23044.436000] Disabling non-boot CPUs ...May 5 21:53:49 x3 kernel: [23044.568000] Breaking affinity for irq 12May 5 21:53:49 x3 kernel: [23044.624000] CPU 1 is now offlineMay 5 21:53:49 x3 kernel: [23044.624000] SMP alternatives: switching to UP codeMay 5 21:53:54 x3 kernel: [23044.668000] CPU1 is downMay 5 21:53:54 x3 kernel: [23044.668000] Stopping tasks ... done.May 5 21:53:54 x3 kernel: [23045.108000] Shrinking memory... ^H-^H\^H|^H/^H-^H\^Hdone (63638 pages freed)May 5 21:53:54 x3 kernel: [23046.104000] Freed 254552 kbytes in 1.00 seconds (254.55 MB/s)May 5 21:53:54 x3 kernel: [23046.104000] Suspending console(s)May 5 21:53:54 x3 kernel: [23046.104000] usbdev4.8_ep83: PM: suspend 0->1, parent 4-2:1.0 already 2May 5 21:53:54 x3 kernel: [23046.104000] usbdev4.8_ep02: PM: suspend 0->1, parent 4-2:1.0 already 2May 5 21:53:54 x3 kernel: [23046.104000] usbdev4.8_ep81: PM: suspend 0->1, parent 4-2:1.0 already 2May 5 21:53:54 x3 kernel: [23046.104000] usb 4-2:1.0: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] usb 4-2:1.0: PM: suspend 2->1, parent 4-2 already 2May 5 21:53:54 x3 kernel: [23046.104000] usbdev4.8_ep00: PM: suspend 0->1, parent 4-2 already 2May 5 21:53:54 x3 kernel: [23046.104000] usb 4-2: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] usb 4-2: PM: suspend 2->1, parent usb4 already 2May 5 21:53:54 x3 kernel: [23046.104000] platform bluetooth: freezeMay 5 21:53:54 x3 kernel: [23046.104000] platform dock.0: freezeMay 5 21:53:54 x3 kernel: [23046.104000] iTCO_wdt iTCO_wdt: freezeMay 5 21:53:54 x3 kernel: [23046.104000] sr 5:0:0:0: freezeMay 5 21:53:54 x3 kernel: [23046.104000] sd 1:0:0:0: freezeMay 5 21:53:54 x3 kernel: [23046.104000] usbdev5.1_ep81: PM: suspend 0->1, parent 5-0:1.0 already 2May 5 21:53:54 x3 kernel: [23046.104000] hub 5-0:1.0: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] hub 5-0:1.0: PM: suspend 2->1, parent usb5 already 2May 5 21:53:54 x3 kernel: [23046.104000] usbdev5.1_ep00: PM: suspend 0->1, parent usb5 already 2May 5 21:53:54 x3 kernel: [23046.104000] usb usb5: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2May 5 21:53:54 x3 kernel: [23046.104000] hub 4-0:1.0: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2May 5 21:53:54 x3 kernel: [23046.104000] usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2May 5 21:53:54 x3 kernel: [23046.104000] usb usb4: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2May 5 21:53:54 x3 kernel: [23046.104000] hub 3-0:1.0: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2May 5 21:53:54 x3 kernel: [23046.104000] usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2May 5 21:53:54 x3 kernel: [23046.104000] usb usb3: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2May 5 21:53:54 x3 kernel: [23046.104000] hub 2-0:1.0: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2May 5 21:53:54 x3 kernel: [23046.104000] usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2May 5 21:53:54 x3 kernel: [23046.104000] usb usb2: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2May 5 21:53:54 x3 kernel: [23046.104000] hub 1-0:1.0: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2May 5 21:53:54 x3 kernel: [23046.104000] usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2May 5 21:53:54 x3 kernel: [23046.104000] usb usb1: PM: suspend 2-->1May 5 21:53:54 x3 kernel: [23046.104000] platform vesafb.0: freezeMay 5 21:53:54 x3 kernel: [23046.104000] platform eisa.0: freezeMay 5 21:53:54 x3 kernel: [23046.104000] i8042 i8042: freezeMay 5 21:53:54 x3 kernel: [23047.084000] serial8250 serial8250: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci_express 0000:00:1c.3:pcie02: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci_express 0000:00:1c.3:pcie00: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci_express 0000:00:1c.2:pcie02: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci_express 0000:00:1c.2:pcie00: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci_express 0000:00:1c.1:pcie02: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci_express 0000:00:1c.1:pcie00: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci_express 0000:00:1c.0:pcie02: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci_express 0000:00:1c.0:pcie00: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci_express 0000:00:01.0:pcie00: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pcspkr pcspkr: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pnp 00:0b: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pnp 00:0a: freezeMay 5 21:53:54 x3 kernel: [23047.084000] i8042 aux 00:09: freezeMay 5 21:53:54 x3 kernel: [23047.084000] i8042 kbd 00:08: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pnp 00:07: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pnp 00:06: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pnp 00:05: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pnp 00:04: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pnp 00:03: freezeMay 5 21:53:54 x3 kernel: [23047.084000] system 00:02: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pnp 00:01: freezeMay 5 21:53:54 x3 kernel: [23047.084000] system 00:00: freezeMay 5 21:53:54 x3 kernel: [23047.084000] yenta_cardbus 0000:15:00.0: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci 0000:03:00.0: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci 0000:02:00.0: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci 0000:01:00.0: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci 0000:00:1f.3: freezeMay 5 21:53:54 x3 kernel: [23047.084000] ahci 0000:00:1f.2: freezeMay 5 21:53:54 x3 kernel: [23047.084000] ACPI: PCI interrupt for device 0000:00:1f.2 disabledMay 5 21:53:54 x3 kernel: [23047.084000] ata_piix 0000:00:1f.1: freezeMay 5 21:53:54 x3 kernel: [23047.084000] ata6: ACPI get timing mode failed.May 5 21:53:54 x3 kernel: [23047.084000] ACPI: PCI interrupt for device 0000:00:1f.1 disabledMay 5 21:53:54 x3 kernel: [23047.084000] pci 0000:00:1f.0: freezeMay 5 21:53:54 x3 kernel: [23047.084000] pci 0000:00:1e.0: freezeMay 5 21:53:54 x3 kernel: [23047.084000] ehci_hcd 0000:00:1d.7: freezeMay 5 21:53:54 x3 kernel: [23047.084000] ACPI: PCI interrupt for device 0000:00:1d.7 disabledMay 5 21:53:54 x3 kernel: [23047.100000] uhci_hcd 0000:00:1d.3: freezeMay 5 21:53:54 x3 kernel: [23047.100000] ACPI: PCI interrupt for device 0000:00:1d.3 disabledMay 5 21:53:54 x3 kernel: [23047.100000] uhci_hcd 0000:00:1d.2: freezeMay 5 21:53:54 x3 kernel: [23047.100000] ACPI: PCI interrupt for device 0000:00:1d.2 disabledMay 5 21:53:54 x3 kernel: [23047.100000] uhci_hcd 0000:00:1d.1: freezeMay 5 21:53:54 x3 kernel: [23047.100000] ACPI: PCI interrupt for device 0000:00:1d.1 disabledMay 5 21:53:54 x3 kernel: [23047.100000] uhci_hcd 0000:00:1d.0: freezeMay 5 21:53:54 x3 kernel: [23047.100000] ACPI: PCI interrupt for device 0000:00:1d.0 disabledMay 5 21:53:54 x3 kernel: [23047.100000] pcieport-driver 0000:00:1c.3: freezeMay 5 21:53:54 x3 kernel: [23047.100000] pcieport-driver 0000:00:1c.2: freezeMay 5 21:53:54 x3 kernel: [23047.100000] pcieport-driver 0000:00:1c.1: freezeMay 5 21:53:54 x3 kernel: [23047.100000] pcieport-driver 0000:00:1c.0: freezeMay 5 21:53:54 x3 kernel: [23047.100000] HDA Intel 0000:00:1b.0: freezeMay 5 21:53:54 x3 kernel: [23047.108000] ACPI: PCI interrupt for device 0000:00:1b.0 disabledMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:01.0: freezeMay 5 21:53:54 x3 kernel: [23047.124000] agpgart-intel 0000:00:00.0: freezeMay 5 21:53:54 x3 kernel: [23047.124000] acpi acpi: freezeMay 5 21:53:54 x3 kernel: [23047.124000] PM: snapshotting memory.May 5 21:53:54 x3 kernel: [23047.124000] platform bluetooth: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] platform dock.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] iTCO_wdt iTCO_wdt: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] platform vesafb.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] platform eisa.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] i8042 i8042: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] serial8250 serial8250: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pcspkr pcspkr: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] yenta_cardbus 0000:15:00.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:03:00.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:02:00.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:01:00.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:00:1f.3: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:00:1f.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:00:1e.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:1c.3: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:1c.2: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:1c.1: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:1c.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] HDA Intel 0000:00:1b.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:01.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] agpgart-intel 0000:00:00.0: LATE freezeMay 5 21:53:54 x3 kernel: [23047.124000] swsusp: critical section: May 5 21:53:54 x3 kernel: [23047.124000] swsusp: Need to copy 58542 pagesMay 5 21:53:54 x3 kernel: [23047.124000] swsusp: Normal pages needed: 58542 + 1024 + 14, available pages: 72224May 5 21:53:54 x3 kernel: [23047.124000] CMOS clock skew detected in timer resume!May 5 21:53:54 x3 kernel: [23047.124000] agpgart-intel 0000:00:00.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:01.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] HDA Intel 0000:00:1b.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:1c.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:1c.1: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:1c.2: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pcieport-driver 0000:00:1c.3: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] uhci_hcd 0000:00:1d.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] uhci_hcd 0000:00:1d.1: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] uhci_hcd 0000:00:1d.2: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] uhci_hcd 0000:00:1d.3: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] ehci_hcd 0000:00:1d.7: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:00:1e.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:00:1f.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] ata_piix 0000:00:1f.1: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] ahci 0000:00:1f.2: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:00:1f.3: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:01:00.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:02:00.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pci 0000:03:00.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] yenta_cardbus 0000:15:00.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] pcspkr pcspkr: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] serial8250 serial8250: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] i8042 i8042: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] platform eisa.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] platform vesafb.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] iTCO_wdt iTCO_wdt: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] platform dock.0: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] platform bluetooth: EARLY resumeMay 5 21:53:54 x3 kernel: [23047.124000] PM: Image restored successfully.May 5 21:53:54 x3 kernel: [23047.128000] acpi acpi: resumingMay 5 21:53:54 x3 kernel: [23047.132000] agpgart-intel 0000:00:00.0: resumingMay 5 21:53:54 x3 kernel: [23047.132000] pcieport-driver 0000:00:01.0: resumingMay 5 21:53:54 x3 kernel: [23047.132000] PCI: Setting latency timer of device 0000:00:01.0 to 64May 5 21:53:54 x3 kernel: [23047.132000] HDA Intel 0000:00:1b.0: resumingMay 5 21:53:54 x3 kernel: [23047.148000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)May 5 21:53:54 x3 kernel: [23047.148000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21May 5 21:53:54 x3 kernel: [23047.148000] PCI: Setting latency timer of device 0000:00:1b.0 to 64May 5 21:53:54 x3 kernel: [23047.220000] pcieport-driver 0000:00:1c.0: resumingMay 5 21:53:54 x3 kernel: [23047.220000] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 5 21:53:54 x3 kernel: [23047.220000] pcieport-driver 0000:00:1c.1: resumingMay 5 21:53:54 x3 kernel: [23047.220000] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 5 21:53:54 x3 kernel: [23047.220000] pcieport-driver 0000:00:1c.2: resumingMay 5 21:53:54 x3 kernel: [23047.220000] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 7060, writing 20007060)May 5 21:53:54 x3 kernel: [23047.220000] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 5 21:53:54 x3 kernel: [23047.220000] pcieport-driver 0000:00:1c.3: resumingMay 5 21:53:54 x3 kernel: [23047.220000] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 5 21:53:54 x3 kernel: [23047.220000] uhci_hcd 0000:00:1d.0: resumingMay 5 21:53:54 x3 kernel: [23047.220000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16May 5 21:53:54 x3 kernel: [23047.220000] PCI: Setting latency timer of device 0000:00:1d.0 to 64May 5 21:53:54 x3 kernel: [23047.220000] usb usb1: root hub lost power or was resetMay 5 21:53:54 x3 kernel: [23047.220000] uhci_hcd 0000:00:1d.1: resumingMay 5 21:53:54 x3 kernel: [23047.220000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21May 5 21:53:54 x3 kernel: [23047.220000] PCI: Setting latency timer of device 0000:00:1d.1 to 64May 5 21:53:54 x3 kernel: [23047.220000] usb usb2: root hub lost power or was resetMay 5 21:53:54 x3 kernel: [23047.220000] uhci_hcd 0000:00:1d.2: resumingMay 5 21:53:54 x3 kernel: [23047.220000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22May 5 21:53:54 x3 kernel: [23047.220000] PCI: Setting latency timer of device 0000:00:1d.2 to 64May 5 21:53:54 x3 kernel: [23047.220000] usb usb3: root hub lost power or was resetMay 5 21:53:54 x3 kernel: [23047.220000] uhci_hcd 0000:00:1d.3: resumingMay 5 21:53:54 x3 kernel: [23047.220000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23May 5 21:53:54 x3 kernel: [23047.220000] PCI: Setting latency timer of device 0000:00:1d.3 to 64May 5 21:53:54 x3 kernel: [23047.220000] usb usb4: root hub lost power or was resetMay 5 21:53:54 x3 kernel: [23047.220000] ehci_hcd 0000:00:1d.7: resumingMay 5 21:53:54 x3 kernel: [23047.236000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23May 5 21:53:54 x3 kernel: [23047.236000] PCI: Setting latency timer of device 0000:00:1d.7 to 64May 5 21:53:54 x3 kernel: [23047.236000] usb usb5: root hub lost power or was resetMay 5 21:53:54 x3 kernel: [23047.240000] ehci_hcd 0000:00:1d.7: debug port 1May 5 21:53:54 x3 kernel: [23047.240000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7May 5 21:53:54 x3 kernel: [23047.240000] pci 0000:00:1e.0: resumingMay 5 21:53:54 x3 kernel: [23047.240000] PCI: Setting latency timer of device 0000:00:1e.0 to 64May 5 21:53:54 x3 kernel: [23047.240000] pci 0000:00:1f.0: resumingMay 5 21:53:54 x3 kernel: [23047.240000] ata_piix 0000:00:1f.1: resumingMay 5 21:53:54 x3 kernel: [23047.240000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880001, writing 2880005)May 5 21:53:54 x3 kernel: [23047.240000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16May 5 21:53:54 x3 kernel: [23047.240000] PCI: Setting latency timer of device 0000:00:1f.1 to 64May 5 21:53:54 x3 kernel: [23047.244000] ata6: ACPI set timing mode failed.May 5 21:53:54 x3 kernel: [23047.244000] ata6: port disabled. ignoring.May 5 21:53:54 x3 kernel: [23047.244000] ahci 0000:00:1f.2: resumingMay 5 21:53:54 x3 kernel: [23047.244000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)May 5 21:53:54 x3 kernel: [23047.244000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16May 5 21:53:54 x3 kernel: [23047.244000] PCI: Setting latency timer of device 0000:00:1f.2 to 64May 5 21:53:54 x3 kernel: [23047.244000] pci 0000:00:1f.3: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci 0000:01:00.0: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci 0000:02:00.0: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci 0000:03:00.0: resumingMay 5 21:53:54 x3 kernel: [23047.244000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100102)May 5 21:53:54 x3 kernel: [23047.244000] yenta_cardbus 0000:15:00.0: resumingMay 5 21:53:54 x3 kernel: [23047.244000] PM: Writing back config space on device 0000:15:00.0 at offset f (was 3c0010b, writing 5c0010b)May 5 21:53:54 x3 kernel: [23047.244000] PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 2a808, writing 2a820)May 5 21:53:54 x3 kernel: [23047.244000] system 00:00: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pnp 00:01: resumingMay 5 21:53:54 x3 kernel: [23047.244000] system 00:02: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pnp 00:03: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pnp 00:04: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pnp 00:05: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pnp 00:06: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pnp 00:07: resumingMay 5 21:53:54 x3 kernel: [23047.244000] i8042 kbd 00:08: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pnp: Device 00:08 does not support activation.May 5 21:53:54 x3 kernel: [23047.244000] i8042 aux 00:09: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pnp: Device 00:09 does not support activation.May 5 21:53:54 x3 kernel: [23047.244000] pnp 00:0a: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pnp 00:0b: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pcspkr pcspkr: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci_express 0000:00:01.0:pcie00: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci_express 0000:00:1c.0:pcie00: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci_express 0000:00:1c.0:pcie02: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci_express 0000:00:1c.1:pcie00: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci_express 0000:00:1c.1:pcie02: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci_express 0000:00:1c.2:pcie00: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci_express 0000:00:1c.2:pcie02: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci_express 0000:00:1c.3:pcie00: resumingMay 5 21:53:54 x3 kernel: [23047.244000] pci_express 0000:00:1c.3:pcie02: resumingMay 5 21:53:54 x3 kernel: [23047.244000] serial8250 serial8250: resumingMay 5 21:53:54 x3 kernel: [23047.244000] i8042 i8042: resumingMay 5 21:53:54 x3 kernel: [23047.248000] atkbd serio0: resumingMay 5 21:53:54 x3 kernel: [23047.256000] platform eisa.0: resumingMay 5 21:53:54 x3 kernel: [23047.256000] psmouse serio1: resumingMay 5 21:53:54 x3 kernel: [23047.556000] ata2: SATA link down (SStatus 0 SControl 0)May 5 21:53:54 x3 kernel: [23047.556000] ata3: SATA link down (SStatus 0 SControl 0)May 5 21:53:54 x3 kernel: [23047.556000] ata4: SATA link down (SStatus 0 SControl 0)May 5 21:53:54 x3 kernel: [23047.852000] platform vesafb.0: resumingMay 5 21:53:54 x3 kernel: [23047.852000] usb usb1: resumingMay 5 21:53:54 x3 kernel: [23047.892000] usb usb2: resumingMay 5 21:53:54 x3 kernel: [23047.932000] usb usb3: resumingMay 5 21:53:54 x3 kernel: [23047.972000] usb usb4: resumingMay 5 21:53:54 x3 kernel: [23048.012000] usb usb5: resumingMay 5 21:53:54 x3 kernel: [23048.032000] sd 1:0:0:0: resumingMay 5 21:53:54 x3 kernel: [23048.032000] sr 5:0:0:0: resumingMay 5 21:53:54 x3 kernel: [23048.032000] psmouse serio2: resumingMay 5 21:53:54 x3 kernel: [23048.736000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)May 5 21:53:54 x3 kernel: [23048.736000] ata5.00: configured for UDMA/33May 5 21:53:54 x3 kernel: [23048.736000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 5 21:53:54 x3 kernel: [23048.736000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 5 21:53:54 x3 kernel: [23048.736000] ata1.00: configured for UDMA/100May 5 21:53:54 x3 kernel: [23048.736000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 5 21:53:54 x3 kernel: [23048.736000] sda: Write Protect is offMay 5 21:53:54 x3 kernel: [23048.736000] sda: Mode Sense: 00 3a 00 00May 5 21:53:54 x3 kernel: [23048.736000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 5 21:53:54 x3 kernel: [23051.000000] iTCO_wdt iTCO_wdt: resumingMay 5 21:53:54 x3 kernel: [23051.000000] platform dock.0: resumingMay 5 21:53:54 x3 kernel: [23051.000000] platform bluetooth: resumingMay 5 21:53:54 x3 kernel: [23051.000000] usbdev4.8_ep00: PM: resume from 0, parent 4-2 still 2May 5 21:53:54 x3 kernel: [23051.000000] usbdev4.8_ep81: PM: resume from 0, parent 4-2:1.0 still 2May 5 21:53:54 x3 kernel: [23051.000000] usbdev4.8_ep02: PM: resume from 0, parent 4-2:1.0 still 2May 5 21:53:54 x3 kernel: [23051.000000] usbdev4.8_ep83: PM: resume from 0, parent 4-2:1.0 still 2May 5 21:53:54 x3 kernel: [23051.000000] Restarting tasks ... <6>usb 4-2: USB disconnect, address 8May 5 21:53:54 x3 kernel: [23051.028000] done.May 5 21:53:54 x3 kernel: [23051.028000] Enabling non-boot CPUs ...May 5 21:53:54 x3 kernel: [23051.060000] SMP alternatives: switching to SMP codeMay 5 21:53:54 x3 kernel: [23051.060000] Booting processor 1/1 eip 3000May 5 21:53:54 x3 kernel: [23051.068000] Initializing CPU#1May 5 21:53:54 x3 kernel: [23051.152000] Calibrating delay using timer specific routine.. 3990.23 BogoMIPS (lpj=7980465)May 5 21:53:54 x3 kernel: [23051.152000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 5 21:53:54 x3 kernel: [23051.152000] monitor/mwait feature present.May 5 21:53:54 x3 kernel: [23051.152000] CPU: L1 I cache: 32K, L1 D cache: 32KMay 5 21:53:54 x3 kernel: [23051.152000] CPU: L2 cache: 2048KMay 5 21:53:54 x3 kernel: [23051.152000] CPU: Physical Processor ID: 0May 5 21:53:54 x3 kernel: [23051.152000] CPU: Processor Core ID: 1May 5 21:53:54 x3 kernel: [23051.152000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 5 21:53:54 x3 kernel: [23051.152000] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 5 21:53:54 x3 kernel: [23051.160000] CPU1 is upMay 5 21:53:54 x3 kernel: [23051.784000] usb 4-2: new full speed USB device using uhci_hcd and address 9May 5 21:53:54 x3 kernel: [23051.960000] usb 4-2: configuration #1 chosen from 1 choiceMay 5 21:53:56 x3 kernel: [23053.248000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPIMay 5 21:53:56 x3 kernel: [23053.248000] Copyright (c) 1999-2006 Intel Corporation.May 5 21:53:56 x3 kernel: [23053.252000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 5 21:53:56 x3 kernel: [23053.252000] PCI: Setting latency timer of device 0000:02:00.0 to 64May 5 21:53:56 x3 kernel: [23053.312000] e1000: 0000:02:00.0: e1000_probe: The EEPROM Checksum Is Not ValidMay 5 21:53:56 x3 kernel: [23053.332000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 5 21:53:56 x3 kernel: [23053.332000] e1000: probe of 0000:02:00.0 failed with error -5May 5 21:53:56 x3 kernel: [23053.356000] ieee80211_crypt: registered algorithm 'NULL'May 5 21:53:56 x3 kernel: [23053.360000] ieee80211: 802.11 data/management/control stack, git-1.1.13May 5 21:53:56 x3 kernel: [23053.360000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>May 5 21:53:56 x3 kernel: [23053.396000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpMay 5 21:53:56 x3 kernel: [23053.396000] ipw3945: Copyright(c) 2003-2006 Intel CorporationMay 5 21:53:56 x3 kernel: [23053.396000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21May 5 21:53:56 x3 kernel: [23053.396000] PCI: Setting latency timer of device 0000:03:00.0 to 64May 5 21:53:56 x3 kernel: [23053.396000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionMay 5 15:30:22 x3 kernel: [23054.884000] input: Power Button (FF) as /class/input/input17May 5 15:30:22 x3 kernel: [23054.884000] ACPI: Power Button (FF) [PWRF]May 5 15:30:22 x3 kernel: [23054.884000] input: Lid Switch as /class/input/input18May 5 15:30:22 x3 kernel: [23054.884000] ACPI: Lid Switch [LID]May 5 15:30:22 x3 kernel: [23054.884000] input: Sleep Button (CM) as /class/input/input19May 5 15:30:22 x3 kernel: [23054.884000] ACPI: Sleep Button (CM) [SLPB]May 5 15:30:23 x3 kernel: [23055.284000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)May 5 15:30:23 x3 kernel: [23055.312000] ACPI: Thermal Zone [THM0] (55 C)May 5 15:30:23 x3 kernel: [23055.316000] ACPI: Thermal Zone [THM1] (57 C)May 5 15:30:23 x3 kernel: [23055.360000] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07May 5 15:30:23 x3 kernel: [23055.360000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13May 5 15:30:23 x3 kernel: [23055.360000] ibm_acpi: http://ibm-acpi.sf.net/May 5 15:30:23 x3 kernel: [23055.428000] ACPI: AC Adapter [AC] (on-line)May 5 15:30:23 x3 kernel: [23055.464000] ACPI: Battery Slot [BAT0] (battery present)May 5 15:30:23 x3 kernel: [23055.604000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 5 15:31:24 x3 kernel: [23116.408000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 5 15:35:19 x3 kernel: Inspecting /boot/System.map-2.6.20-15-genericMay 5 15:35:19 x3 kernel: Loaded 24975 symbols from /boot/System.map-2.6.20-15-generic.May 5 15:35:19 x3 kernel: Symbols match kernel version 2.6.20.May 5 15:35:19 x3 kernel: No module symbols loaded - kernel modules not enabled. May 5 15:35:19 x3 kernel: [ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-provided physical RAM map:May 5 15:35:19 x3 kernel: [ 0.000000] sanitize startMay 5 15:35:19 x3 kernel: [ 0.000000] sanitize endMay 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() type is E820_RAMMay 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fdd0000 end: 000000001fed0000 type: 1May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() type is E820_RAMMay 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001fed0000 size: 000000000000f000 end: 000000001fedf000 type: 3May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001fedf000 size: 0000000000021000 end: 000000001ff00000 type: 4May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: 00000000f4000000 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fed0000 (usable)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 000000001fed0000 - 000000001fedf000 (ACPI data)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 000000001fedf000 - 000000001ff00000 (ACPI NVS)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)May 5 15:35:19 x3 kernel: [ 0.000000] 0MB HIGHMEM available.May 5 15:35:19 x3 kernel: [ 0.000000] 510MB LOWMEM available.May 5 15:35:19 x3 kernel: [ 0.000000] found SMP MP-table at 000f6810May 5 15:35:19 x3 kernel: [ 0.000000] Entering add_active_range(0, 0, 130768) 0 entries of 256 usedMay 5 15:35:19 x3 kernel: [ 0.000000] Zone PFN ranges:May 5 15:35:19 x3 kernel: [ 0.000000] DMA 0 -> 4096May 5 15:35:19 x3 kernel: [ 0.000000] Normal 4096 -> 130768May 5 15:35:19 x3 kernel: [ 0.000000] HighMem 130768 -> 130768May 5 15:35:19 x3 kernel: [ 0.000000] early_node_map[1] active PFN rangesMay 5 15:35:19 x3 kernel: [ 0.000000] 0: 0 -> 130768May 5 15:35:19 x3 kernel: [ 0.000000] On node 0 totalpages: 130768May 5 15:35:19 x3 kernel: [ 0.000000] DMA zone: 32 pages used for memmapMay 5 15:35:19 x3 kernel: [ 0.000000] DMA zone: 0 pages reservedMay 5 15:35:19 x3 kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0May 5 15:35:19 x3 kernel: [ 0.000000] Normal zone: 989 pages used for memmapMay 5 15:35:19 x3 kernel: [ 0.000000] Normal zone: 125683 pages, LIFO batch:31May 5 15:35:19 x3 kernel: [ 0.000000] HighMem zone: 0 pages used for memmapMay 5 15:35:19 x3 kernel: [ 0.000000] DMI present.May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: RSDP (v002 LENOVO ) @ 0x000f67d0May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: XSDT (v001 LENOVO TP-79 0x00002090 LTP 0x00000000) @ 0x1fed1486May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: FADT (v003 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fed1600May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 MSFT 0x0100000e) @ 0x1fed17b4May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: ECDT (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fededdfMay 5 15:35:19 x3 kernel: [ 0.000000] ACPI: TCPA (v002 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedee31May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: MADT (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedee63May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: MCFG (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedeecbMay 5 15:35:19 x3 kernel: [ 0.000000] ACPI: HPET (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedef07May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: BOOT (v001 LENOVO TP-79 0x00002090 LTP 0x00000001) @ 0x1fedefd8May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef2697May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef28f6May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef299cMay 5 15:35:19 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef2e93May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: DSDT (v001 LENOVO TP-79 0x00002090 MSFT 0x0100000e) @ 0x00000000May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)May 5 15:35:19 x3 kernel: [ 0.000000] Processor #0 6:14 APIC version 20May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)May 5 15:35:19 x3 kernel: [ 0.000000] Processor #1 6:14 APIC version 20May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])May 5 15:35:19 x3 kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: IRQ0 used by override.May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: IRQ2 used by override.May 5 15:35:19 x3 kernel: [ 0.000000] ACPI: IRQ9 used by override.May 5 15:35:19 x3 kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsMay 5 15:35:19 x3 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000May 5 15:35:19 x3 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationMay 5 15:35:19 x3 kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)May 5 15:35:19 x3 kernel: [ 0.000000] Detected 1995.171 MHz processor.May 5 15:35:19 x3 kernel: [ 13.314529] Built 1 zonelists. Total pages: 129747May 5 15:35:19 x3 kernel: [ 13.314533] Kernel command line: root=UUID=749d2629-36cd-4da7-b622-21add63394e3 ro quiet splashMay 5 15:35:19 x3 kernel: [ 13.314668] mapped APIC to ffffd000 (fee00000)May 5 15:35:19 x3 kernel: [ 13.314671] mapped IOAPIC to ffffc000 (fec00000)May 5 15:35:19 x3 kernel: [ 13.314673] Enabling fast FPU save and restore... done.May 5 15:35:19 x3 kernel: [ 13.314675] Enabling unmasked SIMD FPU exception support... done.May 5 15:35:19 x3 kernel: [ 13.314682] Initializing CPU#0May 5 15:35:19 x3 kernel: [ 13.314751] PID hash table entries: 2048 (order: 11, 8192 bytes)May 5 15:35:19 x3 kernel: [ 13.317187] Console: colour VGA+ 80x25May 5 15:35:19 x3 kernel: [ 13.317324] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)May 5 15:35:19 x3 kernel: [ 13.317481] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)May 5 15:35:19 x3 kernel: [ 13.327598] Memory: 507328k/523072k available (1992k kernel code, 15216k reserved, 893k data, 328k init, 0k highmem)May 5 15:35:19 x3 kernel: [ 13.327606] virtual kernel memory layout:May 5 15:35:19 x3 kernel: [ 13.327607] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)May 5 15:35:19 x3 kernel: [ 13.327608] pkmap : 0xff800000 - 0xffc00000 (4096 kB)May 5 15:35:19 x3 kernel: [ 13.327609] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)May 5 15:35:19 x3 kernel: [ 13.327610] lowmem : 0xc0000000 - 0xdfed0000 ( 510 MB)May 5 15:35:19 x3 kernel: [ 13.327611] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)May 5 15:35:19 x3 kernel: [ 13.327612] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)May 5 15:35:19 x3 kernel: [ 13.327614] .text : 0xc0100000 - 0xc02f2264 (1992 kB)May 5 15:35:19 x3 kernel: [ 13.327617] Checking if this processor honours the WP bit even in supervisor mode... Ok.May 5 15:35:19 x3 kernel: [ 13.327765] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0May 5 15:35:19 x3 kernel: [ 13.327770] hpet0: 3 64-bit timers, 14318180 HzMay 5 15:35:19 x3 kernel: [ 13.328775] Using HPET for base-timerMay 5 15:35:19 x3 kernel: [ 13.407726] Calibrating delay using timer specific routine.. 3994.41 BogoMIPS (lpj=7988827)May 5 15:35:19 x3 kernel: [ 13.407759] Security Framework v1.0.0 initializedMay 5 15:35:19 x3 kernel: [ 13.407765] SELinux: Disabled at boot.May 5 15:35:19 x3 kernel: [ 13.407777] Mount-cache hash table entries: 512May 5 15:35:19 x3 kernel: [ 13.407885] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 5 15:35:19 x3 kernel: [ 13.407892] monitor/mwait feature present.May 5 15:35:19 x3 kernel: [ 13.407894] using mwait in idle threads.May 5 15:35:19 x3 kernel: [ 13.407897] CPU: L1 I cache: 32K, L1 D cache: 32KMay 5 15:35:19 x3 kernel: [ 13.407899] CPU: L2 cache: 2048KMay 5 15:35:19 x3 kernel: [ 13.407902] CPU: Physical Processor ID: 0May 5 15:35:19 x3 kernel: [ 13.407903] CPU: Processor Core ID: 0May 5 15:35:19 x3 kernel: [ 13.407905] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 5 15:35:19 x3 kernel: [ 13.407913] Compat vDSO mapped to ffffe000.May 5 15:35:19 x3 kernel: [ 13.407916] Remapping vsyscall page to ffffe000May 5 15:35:19 x3 kernel: [ 13.407926] Checking 'hlt' instruction... OK.May 5 15:35:19 x3 kernel: [ 13.423799] SMP alternatives: switching to UP codeMay 5 15:35:19 x3 kernel: [ 13.424082] Early unpacking initramfs... doneMay 5 15:35:19 x3 kernel: [ 13.708816] ACPI: Core revision 20060707May 5 15:35:19 x3 kernel: [ 13.709014] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.May 5 15:35:19 x3 kernel: [ 13.736294] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 5 15:35:19 x3 kernel: [ 13.736312] SMP alternatives: switching to SMP codeMay 5 15:35:19 x3 kernel: [ 13.736417] Booting processor 1/1 eip 3000May 5 15:35:19 x3 kernel: [ 13.747100] Initializing CPU#1May 5 15:35:19 x3 kernel: [ 13.827779] Calibrating delay using timer specific routine.. 3990.11 BogoMIPS (lpj=7980234)May 5 15:35:19 x3 kernel: [ 13.827785] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 5 15:35:19 x3 kernel: [ 13.827789] monitor/mwait feature present.May 5 15:35:19 x3 kernel: [ 13.827792] CPU: L1 I cache: 32K, L1 D cache: 32KMay 5 15:35:19 x3 kernel: [ 13.827794] CPU: L2 cache: 2048KMay 5 15:35:19 x3 kernel: [ 13.827796] CPU: Physical Processor ID: 0May 5 15:35:19 x3 kernel: [ 13.827797] CPU: Processor Core ID: 1May 5 15:35:19 x3 kernel: [ 13.827799] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 5 15:35:19 x3 kernel: [ 13.827948] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 5 15:35:19 x3 kernel: [ 13.827970] Total of 2 processors activated (7984.53 BogoMIPS).May 5 15:35:19 x3 kernel: [ 13.828165] ENABLING IO-APIC IRQsMay 5 15:35:19 x3 kernel: [ 13.828365] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1May 5 15:35:19 x3 kernel: [ 13.975414] checking TSC synchronization across 2 CPUs: May 5 15:35:19 x3 kernel: [ 0.000001] CPU#0 had -142 usecs TSC skew, fixed it up.May 5 15:35:19 x3 kernel: [ 0.000003] CPU#1 had 142 usecs TSC skew, fixed it up.May 5 15:35:19 x3 kernel: [ 0.003997] Brought up 2 CPUsMay 5 15:35:19 x3 kernel: [ 0.132368] migration_cost=60May 5 15:35:19 x3 kernel: [ 0.132613] Booting paravirtualized kernel on bare hardwareMay 5 15:35:19 x3 kernel: [ 0.132707] Time: 15:34:51 Date: 04/05/107May 5 15:35:19 x3 kernel: [ 0.132733] NET: Registered protocol family 16May 5 15:35:19 x3 kernel: [ 0.132810] EISA bus registeredMay 5 15:35:19 x3 kernel: [ 0.132816] ACPI: bus type pci registeredMay 5 15:35:19 x3 kernel: [ 0.132942] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24May 5 15:35:19 x3 kernel: [ 0.132944] PCI: Using configuration type 1May 5 15:35:19 x3 kernel: [ 0.132945] Setting up standard PCI resourcesMay 5 15:35:19 x3 kernel: [ 0.144392] ACPI: Interpreter enabledMay 5 15:35:19 x3 kernel: [ 0.144394] ACPI: Using IOAPIC for interrupt routingMay 5 15:35:19 x3 kernel: [ 0.145143] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)May 5 15:35:19 x3 kernel: [ 0.145682] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)May 5 15:35:19 x3 kernel: [ 0.146218] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)May 5 15:35:19 x3 kernel: [ 0.146758] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)May 5 15:35:19 x3 kernel: [ 0.147295] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)May 5 15:35:19 x3 kernel: [ 0.147833] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)May 5 15:35:19 x3 kernel: [ 0.148391] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)May 5 15:35:19 x3 kernel: [ 0.148927] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)May 5 15:35:19 x3 kernel: [ 0.149271] ACPI: PCI Root Bridge [PCI0] (0000:00)May 5 15:35:19 x3 kernel: [ 0.149275] PCI: Probing PCI hardware (bus 00)May 5 15:35:19 x3 kernel: [ 0.151022] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCOMay 5 15:35:19 x3 kernel: [ 0.151026] PCI quirk: region 1180-11bf claimed by ICH6 GPIOMay 5 15:35:19 x3 kernel: [ 0.151350] Boot video device is 0000:01:00.0May 5 15:35:19 x3 kernel: [ 0.152317] PCI: Transparent bridge - 0000:00:1e.0May 5 15:35:19 x3 kernel: [ 0.152465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]May 5 15:35:19 x3 kernel: [ 0.157243] ACPI: Power Resource [PUBS] (on)May 5 15:35:19 x3 kernel: [ 0.158265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]May 5 15:35:19 x3 kernel: [ 0.158565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]May 5 15:35:19 x3 kernel: [ 0.158732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]May 5 15:35:19 x3 kernel: [ 0.158898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]May 5 15:35:19 x3 kernel: [ 0.159098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]May 5 15:35:19 x3 kernel: [ 0.159297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]May 5 15:35:19 x3 kernel: [ 0.161185] Linux Plug and Play Support v0.97 (c) Adam BelayMay 5 15:35:19 x3 kernel: [ 0.161195] pnp: PnP ACPI initMay 5 15:35:19 x3 kernel: [ 0.165830] pnp: PnP ACPI: found 12 devicesMay 5 15:35:19 x3 kernel: [ 0.165833] PnPBIOS: Disabled by ACPI PNPMay 5 15:35:19 x3 kernel: [ 0.165872] PCI: Using ACPI for IRQ routingMay 5 15:35:19 x3 kernel: [ 0.165874] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportMay 5 15:35:19 x3 kernel: [ 0.219954] NET: Registered protocol family 8May 5 15:35:19 x3 kernel: [ 0.219956] NET: Registered protocol family 20May 5 15:35:19 x3 kernel: [ 0.220886] PCI: Bridge: 0000:00:01.0May 5 15:35:19 x3 kernel: [ 0.220889] IO window: 2000-2fffMay 5 15:35:19 x3 kernel: [ 0.220892] MEM window: ee100000-ee1fffffMay 5 15:35:19 x3 kernel: [ 0.220895] PREFETCH window: d8000000-dfffffffMay 5 15:35:19 x3 kernel: [ 0.220899] PCI: Bridge: 0000:00:1c.0May 5 15:35:19 x3 kernel: [ 0.220902] IO window: 3000-3fffMay 5 15:35:19 x3 kernel: [ 0.220907] MEM window: ee000000-ee0fffffMay 5 15:35:19 x3 kernel: [ 0.220911] PREFETCH window: disabled.May 5 15:35:19 x3 kernel: [ 0.220917] PCI: Bridge: 0000:00:1c.1May 5 15:35:19 x3 kernel: [ 0.220920] IO window: 4000-5fffMay 5 15:35:19 x3 kernel: [ 0.220925] MEM window: ec000000-edffffffMay 5 15:35:19 x3 kernel: [ 0.220930] PREFETCH window: e4000000-e40fffffMay 5 15:35:19 x3 kernel: [ 0.220936] PCI: Bridge: 0000:00:1c.2May 5 15:35:19 x3 kernel: [ 0.220938] IO window: 6000-7fffMay 5 15:35:19 x3 kernel: [ 0.220944] MEM window: e8000000-e9ffffffMay 5 15:35:19 x3 kernel: [ 0.220948] PREFETCH window: e4100000-e41fffffMay 5 15:35:19 x3 kernel: [ 0.220954] PCI: Bridge: 0000:00:1c.3May 5 15:35:19 x3 kernel: [ 0.220957] IO window: 8000-9fffMay 5 15:35:19 x3 kernel: [ 0.220962] MEM window: ea000000-ebffffffMay 5 15:35:19 x3 kernel: [ 0.220967] PREFETCH window: e4200000-e42fffffMay 5 15:35:19 x3 kernel: [ 0.220974] PCI: Bus 22, cardbus bridge: 0000:15:00.0May 5 15:35:19 x3 kernel: [ 0.220976] IO window: 0000a000-0000a0ffMay 5 15:35:19 x3 kernel: [ 0.220982] IO window: 0000a400-0000a4ffMay 5 15:35:19 x3 kernel: [ 0.220987] PREFETCH window: e0000000-e3ffffffMay 5 15:35:19 x3 kernel: [ 0.220992] MEM window: 30000000-33ffffffMay 5 15:35:19 x3 kernel: [ 0.220998] PCI: Bridge: 0000:00:1e.0May 5 15:35:19 x3 kernel: [ 0.221000] IO window: a000-dfffMay 5 15:35:19 x3 kernel: [ 0.221006] MEM window: e4300000-e7ffffffMay 5 15:35:19 x3 kernel: [ 0.221010] PREFETCH window: e0000000-e3ffffffMay 5 15:35:19 x3 kernel: [ 0.221026] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16May 5 15:35:19 x3 kernel: [ 0.221030] PCI: Setting latency timer of device 0000:00:01.0 to 64May 5 15:35:19 x3 kernel: [ 0.221052] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17May 5 15:35:19 x3 kernel: [ 0.221058] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 5 15:35:19 x3 kernel: [ 0.221080] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18May 5 15:35:19 x3 kernel: [ 0.221085] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 5 15:35:19 x3 kernel: [ 0.221107] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19May 5 15:35:19 x3 kernel: [ 0.221113] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 5 15:35:19 x3 kernel: [ 0.221135] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20May 5 15:35:19 x3 kernel: [ 0.221140] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 5 15:35:19 x3 kernel: [ 0.221151] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)May 5 15:35:19 x3 kernel: [ 0.221156] PCI: Setting latency timer of device 0000:00:1e.0 to 64May 5 15:35:19 x3 kernel: [ 0.221174] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 5 15:35:19 x3 kernel: [ 0.221204] NET: Registered protocol family 2May 5 15:35:19 x3 kernel: [ 0.275884] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)May 5 15:35:19 x3 kernel: [ 0.275950] TCP established hash table entries: 16384 (order: 5, 131072 bytes)May 5 15:35:19 x3 kernel: [ 0.276029] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)May 5 15:35:19 x3 kernel: [ 0.276070] TCP: Hash tables configured (established 16384 bind 8192)May 5 15:35:19 x3 kernel: [ 0.276072] TCP reno registeredMay 5 15:35:19 x3 kernel: [ 0.291927] checking if image is initramfs... it isMay 5 15:35:19 x3 kernel: [ 0.857012] Freeing initrd memory: 6995k freedMay 5 15:35:19 x3 kernel: [ 0.857187] Simple Boot Flag at 0x35 set to 0x1May 5 15:35:19 x3 kernel: [ 0.857603] audit: initializing netlink socket (disabled)May 5 15:35:19 x3 kernel: [ 0.857618] audit(1178379291.568:1): initializedMay 5 15:35:19 x3 kernel: [ 0.857776] VFS: Disk quotas dquot_6.5.1May 5 15:35:19 x3 kernel: [ 0.857795] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)May 5 15:35:19 x3 kernel: [ 0.857840] io scheduler noop registeredMay 5 15:35:19 x3 kernel: [ 0.857842] io scheduler anticipatory registeredMay 5 15:35:19 x3 kernel: [ 0.857844] io scheduler deadline registeredMay 5 15:35:19 x3 kernel: [ 0.857855] io scheduler cfq registered (default)May 5 15:35:19 x3 kernel: [ 0.858086] PCI: Setting latency timer of device 0000:00:01.0 to 64May 5 15:35:19 x3 kernel: [ 0.858117] assign_interrupt_mode Found MSI capabilityMay 5 15:35:19 x3 kernel: [ 0.858120] Allocate Port Service[0000:00:01.0:pcie00]May 5 15:35:19 x3 kernel: [ 0.858195] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 5 15:35:19 x3 kernel: [ 0.858249] assign_interrupt_mode Found MSI capabilityMay 5 15:35:19 x3 kernel: [ 0.858251] Allocate Port Service[0000:00:1c.0:pcie00]May 5 15:35:19 x3 kernel: [ 0.858283] Allocate Port Service[0000:00:1c.0:pcie02]May 5 15:35:19 x3 kernel: [ 0.858392] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 5 15:35:19 x3 kernel: [ 0.858445] assign_interrupt_mode Found MSI capabilityMay 5 15:35:19 x3 kernel: [ 0.858447] Allocate Port Service[0000:00:1c.1:pcie00]May 5 15:35:19 x3 kernel: [ 0.858474] Allocate Port Service[0000:00:1c.1:pcie02]May 5 15:35:19 x3 kernel: [ 0.858583] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 5 15:35:19 x3 kernel: [ 0.858636] assign_interrupt_mode Found MSI capabilityMay 5 15:35:19 x3 kernel: [ 0.858638] Allocate Port Service[0000:00:1c.2:pcie00]May 5 15:35:19 x3 kernel: [ 0.858667] Allocate Port Service[0000:00:1c.2:pcie02]May 5 15:35:19 x3 kernel: [ 0.858778] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 5 15:35:19 x3 kernel: [ 0.858831] assign_interrupt_mode Found MSI capabilityMay 5 15:35:19 x3 kernel: [ 0.858833] Allocate Port Service[0000:00:1c.3:pcie00]May 5 15:35:19 x3 kernel: [ 0.858866] Allocate Port Service[0000:00:1c.3:pcie02]May 5 15:35:19 x3 kernel: [ 0.859024] isapnp: Scanning for PnP cards...May 5 15:35:19 x3 kernel: [ 1.213657] isapnp: No Plug & Play device foundMay 5 15:35:19 x3 kernel: [ 1.233487] Real Time Clock Driver v1.12acMay 5 15:35:19 x3 kernel: [ 1.233539] hpet_resources: 0xfed00000 is busyMay 5 15:35:19 x3 kernel: [ 1.233563] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledMay 5 15:35:19 x3 kernel: [ 1.233769] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550AMay 5 15:35:19 x3 kernel: [ 1.234254] mice: PS/2 mouse device common for all miceMay 5 15:35:19 x3 kernel: [ 1.234733] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeMay 5 15:35:19 x3 kernel: [ 1.234936] input: Macintosh mouse button emulation as /class/input/input0May 5 15:35:19 x3 kernel: [ 1.234966] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2May 5 15:35:19 x3 kernel: [ 1.234969] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxMay 5 15:35:19 x3 kernel: [ 1.235245] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12May 5 15:35:19 x3 kernel: [ 1.244739] serio: i8042 KBD port at 0x60,0x64 irq 1May 5 15:35:19 x3 kernel: [ 1.244742] serio: i8042 AUX port at 0x60,0x64 irq 12May 5 15:35:19 x3 kernel: [ 1.244841] EISA: Probing bus 0 at eisa.0May 5 15:35:19 x3 kernel: [ 1.244849] Cannot allocate resource for EISA slot 1May 5 15:35:19 x3 kernel: [ 1.244853] Cannot allocate resource for EISA slot 2May 5 15:35:19 x3 kernel: [ 1.244855] Cannot allocate resource for EISA slot 3May 5 15:35:19 x3 kernel: [ 1.244857] Cannot allocate resource for EISA slot 4May 5 15:35:19 x3 kernel: [ 1.244859] Cannot allocate resource for EISA slot 5May 5 15:35:19 x3 kernel: [ 1.244861] Cannot allocate resource for EISA slot 6May 5 15:35:19 x3 kernel: [ 1.244863] Cannot allocate resource for EISA slot 7May 5 15:35:19 x3 kernel: [ 1.244865] Cannot allocate resource for EISA slot 8May 5 15:35:19 x3 kernel: [ 1.244867] EISA: Detected 0 cards.May 5 15:35:19 x3 kernel: [ 1.274946] TCP cubic registeredMay 5 15:35:19 x3 kernel: [ 1.274955] NET: Registered protocol family 1May 5 15:35:19 x3 kernel: [ 1.274975] Starting balanced_irqMay 5 15:35:19 x3 kernel: [ 1.274981] Using IPI No-Shortcut modeMay 5 15:35:19 x3 kernel: [ 1.275034] input: AT Translated Set 2 keyboard as /class/input/input1May 5 15:35:19 x3 kernel: [ 1.275108] ACPI: (supports S0 S3 S4 S5)May 5 15:35:19 x3 kernel: [ 1.275154] Magic number: 7:986:587May 5 15:35:19 x3 kernel: [ 1.275205] hash matches device ptyc5May 5 15:35:19 x3 kernel: [ 1.275299] Time: tsc clocksource has been installed.May 5 15:35:19 x3 kernel: [ 1.275422] Freeing unused kernel memory: 328k freedMay 5 15:35:19 x3 kernel: [ 2.447466] Capability LSM initializedMay 5 15:35:19 x3 kernel: [ 2.476723] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]May 5 15:35:19 x3 kernel: [ 2.477058] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]May 5 15:35:19 x3 kernel: [ 2.477902] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])May 5 15:35:19 x3 kernel: [ 2.477907] ACPI: Processor [CPU0] (supports 8 throttling states)May 5 15:35:19 x3 kernel: [ 2.478400] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]May 5 15:35:19 x3 kernel: [ 2.478644] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]May 5 15:35:19 x3 kernel: [ 2.479511] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])May 5 15:35:19 x3 kernel: [ 2.479516] ACPI: Processor [CPU1] (supports 8 throttling states)May 5 15:35:19 x3 kernel: [ 3.008000] ACPI: Thermal Zone [THM0] (57 C)May 5 15:35:19 x3 kernel: [ 3.012000] ACPI: Thermal Zone [THM1] (56 C)May 5 15:35:19 x3 kernel: [ 3.016000] Time: hpet clocksource has been installed.May 5 15:35:19 x3 kernel: [ 3.272000] SCSI subsystem initializedMay 5 15:35:19 x3 kernel: [ 3.276000] libata version 2.20 loaded.May 5 15:35:19 x3 kernel: [ 3.292000] ahci 0000:00:1f.2: version 2.1May 5 15:35:19 x3 kernel: [ 3.292000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16May 5 15:35:19 x3 kernel: [ 3.336000] usbcore: registered new interface driver usbfsMay 5 15:35:19 x3 kernel: [ 3.336000] usbcore: registered new interface driver hubMay 5 15:35:19 x3 kernel: [ 3.336000] usbcore: registered new device driver usbMay 5 15:35:19 x3 kernel: [ 3.336000] USB Universal Host Controller Interface driver v3.0May 5 15:35:19 x3 kernel: [ 3.344000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPIMay 5 15:35:19 x3 kernel: [ 3.344000] Copyright (c) 1999-2006 Intel Corporation.May 5 15:35:19 x3 kernel: [ 4.296000] PCI: Setting latency timer of device 0000:00:1f.2 to 64May 5 15:35:19 x3 kernel: [ 4.296000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA modeMay 5 15:35:19 x3 kernel: [ 4.296000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part May 5 15:35:19 x3 kernel: [ 4.296000] ata1: SATA max UDMA/133 cmd 0xe0864500 ctl 0x00000000 bmdma 0x00000000 irq 16May 5 15:35:19 x3 kernel: [ 4.296000] ata2: SATA max UDMA/133 cmd 0xe0864580 ctl 0x00000000 bmdma 0x00000000 irq 16May 5 15:35:19 x3 kernel: [ 4.296000] ata3: SATA max UDMA/133 cmd 0xe0864600 ctl 0x00000000 bmdma 0x00000000 irq 16May 5 15:35:19 x3 kernel: [ 4.296000] ata4: SATA max UDMA/133 cmd 0xe0864680 ctl 0x00000000 bmdma 0x00000000 irq 16May 5 15:35:19 x3 kernel: [ 4.296000] scsi0 : ahciMay 5 15:35:19 x3 kernel: [ 4.780000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)May 5 15:35:19 x3 kernel: [ 4.780000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 5 15:35:19 x3 kernel: [ 4.780000] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100May 5 15:35:19 x3 kernel: [ 4.780000] ata1.00: 156301488 sectors, multi 16: LBA48 May 5 15:35:19 x3 kernel: [ 4.780000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 5 15:35:19 x3 kernel: [ 4.780000] ata1.00: configured for UDMA/100May 5 15:35:19 x3 kernel: [ 4.780000] scsi1 : ahciMay 5 15:35:19 x3 kernel: [ 5.092000] ata2: SATA link down (SStatus 0 SControl 0)May 5 15:35:19 x3 kernel: [ 5.092000] scsi2 : ahciMay 5 15:35:19 x3 kernel: [ 5.404000] ata3: SATA link down (SStatus 0 SControl 0)May 5 15:35:19 x3 kernel: [ 5.404000] scsi3 : ahciMay 5 15:35:19 x3 kernel: [ 5.716000] ata4: SATA link down (SStatus 0 SControl 0)May 5 15:35:19 x3 kernel: [ 5.716000] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5May 5 15:35:19 x3 kernel: [ 5.716000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16May 5 15:35:19 x3 kernel: [ 5.716000] PCI: Setting latency timer of device 0000:00:1d.0 to 64May 5 15:35:19 x3 kernel: [ 5.716000] uhci_hcd 0000:00:1d.0: UHCI Host ControllerMay 5 15:35:19 x3 kernel: [ 5.716000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1May 5 15:35:19 x3 kernel: [ 5.716000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800May 5 15:35:19 x3 kernel: [ 5.716000] usb usb1: configuration #1 chosen from 1 choiceMay 5 15:35:19 x3 kernel: [ 5.716000] hub 1-0:1.0: USB hub foundMay 5 15:35:19 x3 kernel: [ 5.716000] hub 1-0:1.0: 2 ports detectedMay 5 15:35:19 x3 kernel: [ 5.720000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 5 15:35:19 x3 kernel: [ 5.720000] sda: Write Protect is offMay 5 15:35:19 x3 kernel: [ 5.720000] sda: Mode Sense: 00 3a 00 00May 5 15:35:19 x3 kernel: [ 5.720000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 5 15:35:19 x3 kernel: [ 5.720000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 5 15:35:19 x3 kernel: [ 5.720000] sda: Write Protect is offMay 5 15:35:19 x3 kernel: [ 5.720000] sda: Mode Sense: 00 3a 00 00May 5 15:35:19 x3 kernel: [ 5.720000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 5 15:35:19 x3 kernel: [ 5.720000] sda:<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21May 5 15:35:19 x3 kernel: [ 5.820000] PCI: Setting latency timer of device 0000:00:1d.1 to 64May 5 15:35:19 x3 kernel: [ 5.820000] uhci_hcd 0000:00:1d.1: UHCI Host ControllerMay 5 15:35:19 x3 kernel: [ 5.820000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2May 5 15:35:19 x3 kernel: [ 5.820000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820May 5 15:35:19 x3 kernel: [ 5.820000] usb usb2: configuration #1 chosen from 1 choiceMay 5 15:35:19 x3 kernel: [ 5.820000] hub 2-0:1.0: USB hub foundMay 5 15:35:19 x3 kernel: [ 5.820000] hub 2-0:1.0: 2 ports detectedMay 5 15:35:19 x3 kernel: [ 5.924000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22May 5 15:35:19 x3 kernel: [ 5.924000] PCI: Setting latency timer of device 0000:00:1d.2 to 64May 5 15:35:19 x3 kernel: [ 5.924000] uhci_hcd 0000:00:1d.2: UHCI Host ControllerMay 5 15:35:19 x3 kernel: [ 5.924000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3May 5 15:35:19 x3 kernel: [ 5.924000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840May 5 15:35:19 x3 kernel: [ 5.924000] usb usb3: configuration #1 chosen from 1 choiceMay 5 15:35:19 x3 kernel: [ 5.924000] hub 3-0:1.0: USB hub foundMay 5 15:35:19 x3 kernel: [ 5.924000] hub 3-0:1.0: 2 ports detectedMay 5 15:35:19 x3 kernel: [ 6.028000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23May 5 15:35:19 x3 kernel: [ 6.028000] PCI: Setting latency timer of device 0000:00:1d.3 to 64May 5 15:35:19 x3 kernel: [ 6.028000] uhci_hcd 0000:00:1d.3: UHCI Host ControllerMay 5 15:35:19 x3 kernel: [ 6.028000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4May 5 15:35:19 x3 kernel: [ 6.028000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860May 5 15:35:19 x3 kernel: [ 6.028000] usb usb4: configuration #1 chosen from 1 choiceMay 5 15:35:19 x3 kernel: [ 6.028000] hub 4-0:1.0: USB hub foundMay 5 15:35:19 x3 kernel: [ 6.028000] hub 4-0:1.0: 2 ports detectedMay 5 15:35:19 x3 kernel: [ 6.088000] sda1 sda2 sda3 sda4 < sda5 sda6 >May 5 15:35:19 x3 kernel: [ 6.116000] sd 0:0:0:0: Attached scsi disk sdaMay 5 15:35:19 x3 kernel: [ 6.120000] sd 0:0:0:0: Attached scsi generic sg0 type 0May 5 15:35:19 x3 kernel: [ 6.132000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 5 15:35:19 x3 kernel: [ 6.132000] PCI: Setting latency timer of device 0000:02:00.0 to 64May 5 15:35:19 x3 kernel: [ 6.192000] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:58:30:f7:c3May 5 15:35:19 x3 kernel: [ 6.252000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network ConnectionMay 5 15:35:19 x3 kernel: [ 6.252000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23May 5 15:35:19 x3 kernel: [ 6.252000] PCI: Setting latency timer of device 0000:00:1d.7 to 64May 5 15:35:19 x3 kernel: [ 6.252000] ehci_hcd 0000:00:1d.7: EHCI Host ControllerMay 5 15:35:19 x3 kernel: [ 6.252000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5May 5 15:35:19 x3 kernel: [ 6.252000] ehci_hcd 0000:00:1d.7: debug port 1May 5 15:35:19 x3 kernel: [ 6.252000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7May 5 15:35:19 x3 kernel: [ 6.252000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee404000May 5 15:35:19 x3 kernel: [ 6.256000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004May 5 15:35:19 x3 kernel: [ 6.256000] usb usb5: configuration #1 chosen from 1 choiceMay 5 15:35:19 x3 kernel: [ 6.256000] hub 5-0:1.0: USB hub foundMay 5 15:35:19 x3 kernel: [ 6.256000] hub 5-0:1.0: 8 ports detectedMay 5 15:35:19 x3 kernel: [ 6.360000] ata_piix 0000:00:1f.1: version 2.10ac1May 5 15:35:19 x3 kernel: [ 6.360000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16May 5 15:35:19 x3 kernel: [ 6.360000] PCI: Setting latency timer of device 0000:00:1f.1 to 64May 5 15:35:19 x3 kernel: [ 6.360000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14May 5 15:35:19 x3 kernel: [ 6.360000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15May 5 15:35:19 x3 kernel: [ 6.360000] scsi4 : ata_piixMay 5 15:35:19 x3 kernel: [ 6.460000] Attempting manual resumeMay 5 15:35:19 x3 kernel: [ 6.460000] swsusp: Resume From Partition 8:5May 5 15:35:19 x3 kernel: [ 6.460000] PM: Checking swsusp image.May 5 15:35:19 x3 kernel: [ 6.460000] PM: Resume from disk failed.May 5 15:35:19 x3 kernel: [ 6.468000] ReiserFS: sda3: found reiserfs format "3.6" with standard journalMay 5 15:35:19 x3 kernel: [ 6.468000] ReiserFS: sda3: using ordered data modeMay 5 15:35:19 x3 kernel: [ 6.484000] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30May 5 15:35:19 x3 kernel: [ 6.484000] ReiserFS: sda3: checking transaction log (sda3)May 5 15:35:19 x3 kernel: [ 6.528000] ReiserFS: sda3: Using r5 hash to sort namesMay 5 15:35:19 x3 kernel: [ 6.680000] ata5.00: ATAPI, max UDMA/33May 5 15:35:19 x3 kernel: [ 6.844000] ata5.00: configured for UDMA/33May 5 15:35:19 x3 kernel: [ 6.844000] scsi5 : ata_piixMay 5 15:35:19 x3 kernel: [ 6.844000] ata6: port disabled. ignoring.May 5 15:35:19 x3 kernel: [ 6.848000] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5May 5 15:35:19 x3 kernel: [ 6.848000] scsi 4:0:0:0: Attached scsi generic sg1 type 5May 5 15:35:19 x3 kernel: [ 6.876000] usb 4-2: new full speed USB device using uhci_hcd and address 2May 5 15:35:19 x3 kernel: [ 7.052000] usb 4-2: configuration #1 chosen from 1 choiceMay 5 15:35:19 x3 kernel: [ 14.240000] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22May 5 15:35:19 x3 kernel: [ 15.000000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5May 5 15:35:19 x3 kernel: [ 15.068000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4May 5 15:35:19 x3 kernel: [ 15.152000] intel_rng: FWH not detectedMay 5 15:35:19 x3 kernel: [ 15.200000] input: PC Speaker as /class/input/input2May 5 15:35:19 x3 kernel: [ 15.216000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]May 5 15:35:19 x3 kernel: [ 15.216000] Yenta: Using INTVAL to route CSC interrupts to PCIMay 5 15:35:19 x3 kernel: [ 15.216000] Yenta: Routing CardBus interrupts to PCIMay 5 15:35:19 x3 kernel: [ 15.216000] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64May 5 15:35:19 x3 kernel: [ 15.264000] iTCO_vendor_support: vendor-support=0May 5 15:35:19 x3 kernel: [ 15.264000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)May 5 15:35:19 x3 kernel: [ 15.264000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)May 5 15:35:20 x3 kernel: [ 15.264000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)May 5 15:35:20 x3 kernel: [ 15.400000] NET: Registered protocol family 17May 5 15:35:20 x3 kernel: [ 15.416000] Linux agpgart interface v0.102 (c) Dave JonesMay 5 15:35:20 x3 kernel: [ 15.420000] agpgart: Detected an Intel 945GM Chipset.May 5 15:35:20 x3 kernel: [ 15.436000] agpgart: AGP aperture is 256M @ 0x0May 5 15:35:20 x3 kernel: [ 15.440000] ieee80211_crypt: registered algorithm 'NULL'May 5 15:35:20 x3 kernel: [ 15.444000] ieee80211: 802.11 data/management/control stack, git-1.1.13May 5 15:35:20 x3 kernel: [ 15.444000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>May 5 15:35:20 x3 kernel: [ 15.448000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16May 5 15:35:20 x3 kernel: [ 15.448000] Socket status: 30000007May 5 15:35:20 x3 kernel: [ 15.448000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfffMay 5 15:35:20 x3 kernel: [ 15.448000] cs: IO port probe 0xa000-0xdfff: clean.May 5 15:35:20 x3 kernel: [ 15.448000] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffffMay 5 15:35:20 x3 kernel: [ 15.448000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffffMay 5 15:35:20 x3 kernel: [ 15.512000] irda_init()May 5 15:35:20 x3 kernel: [ 15.516000] NET: Registered protocol family 23May 5 15:35:20 x3 kernel: [ 15.580000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayMay 5 15:35:20 x3 kernel: [ 15.580000] Uniform CD-ROM driver Revision: 3.20May 5 15:35:20 x3 kernel: [ 15.580000] sr 4:0:0:0: Attached scsi CD-ROM sr0May 5 15:35:20 x3 kernel: [ 15.592000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpMay 5 15:35:20 x3 kernel: [ 15.592000] ipw3945: Copyright(c) 2003-2006 Intel CorporationMay 5 15:35:20 x3 kernel: [ 15.592000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21May 5 15:35:20 x3 kernel: [ 15.592000] PCI: Setting latency timer of device 0000:03:00.0 to 64May 5 15:35:20 x3 kernel: [ 15.600000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionMay 5 15:35:20 x3 kernel: [ 15.812000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21May 5 15:35:20 x3 kernel: [ 15.812000] PCI: Setting latency timer of device 0000:00:1b.0 to 64May 5 15:35:20 x3 kernel: [ 15.956000] cs: IO port probe 0x100-0x3af: clean.May 5 15:35:20 x3 kernel: [ 15.956000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7May 5 15:35:20 x3 kernel: [ 15.960000] cs: IO port probe 0x820-0x8ff: clean.May 5 15:35:20 x3 kernel: [ 15.960000] cs: IO port probe 0xc00-0xcf7: clean.May 5 15:35:20 x3 kernel: [ 15.960000] cs: IO port probe 0xa00-0xaff: clean.May 5 15:35:20 x3 kernel: [ 15.996000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000May 5 15:35:20 x3 kernel: [ 15.996000] serio: Synaptics pass-through port at isa0060/serio1/input0May 5 15:35:20 x3 kernel: [ 16.044000] input: SynPS/2 Synaptics TouchPad as /class/input/input3May 5 15:35:20 x3 kernel: [ 16.048000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.May 5 15:35:20 x3 kernel: [ 16.048000] nsc-ircc, chip->initMay 5 15:35:20 x3 kernel: [ 16.048000] nsc-ircc, Found chip at base=0x164eMay 5 15:35:20 x3 kernel: [ 16.048000] nsc-ircc, driver loaded (Dag Brattli)May 5 15:35:20 x3 kernel: [ 16.048000] nsc_ircc_open(), can't get iobase of 0x2f8May 5 15:35:20 x3 kernel: [ 16.048000] nsc-ircc, Found chip at base=0x164eMay 5 15:35:20 x3 kernel: [ 16.048000] nsc-ircc, driver loaded (Dag Brattli)May 5 15:35:20 x3 kernel: [ 16.048000] nsc_ircc_open(), can't get iobase of 0x2f8May 5 15:35:20 x3 kernel: [ 16.048000] pnp: Device 00:0a disabled.May 5 15:35:20 x3 kernel: [ 16.264000] fuse init (API version 7.8)May 5 15:35:20 x3 kernel: [ 16.300000] lp: driver loaded but no devices foundMay 5 15:35:20 x3 kernel: [ 16.320000] Adding 1028120k swap on /dev/disk/by-uuid/13472f49-9629-45e1-a0b8-4ff0db443906. Priority:-1 extents:1 across:1028120kMay 5 15:35:20 x3 kernel: [ 17.452000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)May 5 15:35:20 x3 kernel: [ 21.732000] IBM TrackPoint firmware: 0x0e, buttons: 3/3May 5 15:35:20 x3 kernel: [ 22.024000] input: TPPS/2 IBM TrackPoint as /class/input/input4May 5 15:35:20 x3 kernel: [ 24.736000] NTFS driver 2.1.28 [Flags: R/O MODULE].May 5 15:35:20 x3 kernel: [ 24.800000] NTFS volume version 3.1.May 5 15:35:20 x3 kernel: [ 25.028000] NTFS volume version 3.1.May 5 15:35:20 x3 kernel: [ 28.912000] Using specific hotkey driverMay 5 15:35:20 x3 kernel: [ 28.988000] ACPI: AC Adapter [AC] (on-line)May 5 15:35:20 x3 kernel: [ 28.996000] ACPI: ACPI Dock Station Driver May 5 15:35:20 x3 kernel: [ 29.068000] input: Power Button (FF) as /class/input/input5May 5 15:35:20 x3 kernel: [ 29.068000] ACPI: Power Button (FF) [PWRF]May 5 15:35:20 x3 kernel: [ 29.068000] input: Lid Switch as /class/input/input6May 5 15:35:20 x3 kernel: [ 29.068000] ACPI: Lid Switch [LID]May 5 15:35:20 x3 kernel: [ 29.068000] input: Sleep Button (CM) as /class/input/input7May 5 15:35:20 x3 kernel: [ 29.068000] ACPI: Sleep Button (CM) [SLPB]May 5 15:35:20 x3 kernel: [ 29.136000] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07May 5 15:35:20 x3 kernel: [ 29.136000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13May 5 15:35:20 x3 kernel: [ 29.136000] ibm_acpi: http://ibm-acpi.sf.net/May 5 15:35:20 x3 kernel: [ 29.164000] ACPI: Battery Slot [BAT0] (battery present)May 5 15:35:20 x3 kernel: [ 29.176000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)May 5 15:35:20 x3 kernel: [ 29.176000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)May 5 15:35:20 x3 kernel: [ 29.204000] pcc_acpi: loading...May 5 15:35:21 x3 kernel: [ 31.224000] ttyS1: LSR safety check engaged!May 5 15:35:22 x3 kernel: [ 32.084000] ppdev: user-space parallel port driverMay 5 15:35:22 x3 kernel: [ 32.536000] apm: BIOS not found.May 5 15:35:22 x3 kernel: [ 32.644000] Non-volatile memory driver v1.2May 5 15:35:22 x3 kernel: [ 32.656000] input: /usr/sbin/thinkpad-keys as /class/input/input8May 5 15:35:23 x3 kernel: [ 33.100000] Bluetooth: Core ver 2.11May 5 15:35:23 x3 kernel: [ 33.100000] NET: Registered protocol family 31May 5 15:35:23 x3 kernel: [ 33.100000] Bluetooth: HCI device and connection manager initializedMay 5 15:35:23 x3 kernel: [ 33.100000] Bluetooth: HCI socket layer initializedMay 5 15:35:23 x3 kernel: [ 33.128000] Bluetooth: L2CAP ver 2.8May 5 15:35:23 x3 kernel: [ 33.128000] Bluetooth: L2CAP socket layer initializedMay 5 15:35:23 x3 kernel: [ 33.320000] Bluetooth: RFCOMM socket layer initializedMay 5 15:35:23 x3 kernel: [ 33.320000] Bluetooth: RFCOMM TTY layer initializedMay 5 15:35:23 x3 kernel: [ 33.320000] Bluetooth: RFCOMM ver 1.8May 5 15:35:48 x3 kernel: [ 58.448000] NET: Registered protocol family 10May 5 15:35:48 x3 kernel: [ 58.448000] lo: Disabled Privacy ExtensionsMay 5 15:35:48 x3 kernel: [ 58.448000] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 5 15:35:48 x3 kernel: [ 58.448000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 5 15:40:59 x3 kernel: [ 369.096000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes readyMay 5 15:41:18 x3 kernel: [ 387.712000] eth1: no IPv6 routers presentMay 5 15:51:27 x3 kernel: [ 996.872000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 5 15:51:27 x3 kernel: [ 996.964000] ACPI: PCI interrupt for device 0000:03:00.0 disabledMay 5 15:51:27 x3 kernel: [ 996.964000] ieee80211_crypt: unregistered algorithm 'NULL'May 5 15:51:28 x3 kernel: [ 998.508000] PM: suspend-to-disk mode set to 'shutdown'May 5 15:51:28 x3 kernel: [ 998.508000] Disabling non-boot CPUs ...May 5 15:51:29 x3 kernel: [ 998.532000] Breaking affinity for irq 12May 5 15:51:29 x3 kernel: [ 998.636000] CPU 1 is now offlineMay 5 15:51:29 x3 kernel: [ 998.636000] SMP alternatives: switching to UP codeMay 5 16:49:18 x3 kernel: [ 998.636000] CPU1 is downMay 5 16:49:19 x3 kernel: [ 998.636000] Stopping tasks ... done.May 5 16:49:19 x3 kernel: [ 999.312000] Shrinking memory... ^H-^H\^H|^H/^Hdone (35732 pages freed)May 5 16:49:19 x3 kernel: [ 999.932000] Freed 142928 kbytes in 0.62 seconds (230.52 MB/s)May 5 16:49:19 x3 kernel: [ 999.932000] Suspending console(s)May 5 16:49:19 x3 kernel: [ 999.932000] platform bluetooth: freezeMay 5 16:49:19 x3 kernel: [ 999.932000] platform dock.0: freezeMay 5 16:49:19 x3 kernel: [ 999.932000] iTCO_wdt iTCO_wdt: freezeMay 5 16:49:19 x3 kernel: [ 999.932000] usbdev4.2_ep83: PM: suspend 0->1, parent 4-2:1.0 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usbdev4.2_ep02: PM: suspend 0->1, parent 4-2:1.0 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usbdev4.2_ep81: PM: suspend 0->1, parent 4-2:1.0 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usb 4-2:1.0: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] usb 4-2:1.0: PM: suspend 2->1, parent 4-2 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usbdev4.2_ep00: PM: suspend 0->1, parent 4-2 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usb 4-2: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] usb 4-2: PM: suspend 2->1, parent usb4 already 2May 5 16:49:19 x3 kernel: [ 999.932000] sr 4:0:0:0: freezeMay 5 16:49:19 x3 kernel: [ 999.932000] usbdev5.1_ep81: PM: suspend 0->1, parent 5-0:1.0 already 2May 5 16:49:19 x3 kernel: [ 999.932000] hub 5-0:1.0: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] hub 5-0:1.0: PM: suspend 2->1, parent usb5 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usbdev5.1_ep00: PM: suspend 0->1, parent usb5 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usb usb5: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2May 5 16:49:19 x3 kernel: [ 999.932000] hub 4-0:1.0: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usb usb4: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2May 5 16:49:19 x3 kernel: [ 999.932000] hub 3-0:1.0: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usb usb3: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2May 5 16:49:19 x3 kernel: [ 999.932000] hub 2-0:1.0: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usb usb2: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2May 5 16:49:19 x3 kernel: [ 999.932000] hub 1-0:1.0: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2May 5 16:49:19 x3 kernel: [ 999.932000] usb usb1: PM: suspend 2-->1May 5 16:49:19 x3 kernel: [ 999.932000] sd 0:0:0:0: freezeMay 5 16:49:19 x3 kernel: [ 1000.136000] platform vesafb.0: freezeMay 5 16:49:19 x3 kernel: [ 1000.136000] platform eisa.0: freezeMay 5 16:49:19 x3 kernel: [ 1000.136000] i8042 i8042: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] serial8250 serial8250: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci_express 0000:00:1c.3:pcie02: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci_express 0000:00:1c.3:pcie00: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci_express 0000:00:1c.2:pcie02: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci_express 0000:00:1c.2:pcie00: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci_express 0000:00:1c.1:pcie02: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci_express 0000:00:1c.1:pcie00: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci_express 0000:00:1c.0:pcie02: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci_express 0000:00:1c.0:pcie00: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci_express 0000:00:01.0:pcie00: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pcspkr pcspkr: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pnp 00:0b: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pnp 00:0a: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] i8042 aux 00:09: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] i8042 kbd 00:08: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pnp 00:07: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pnp 00:06: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pnp 00:05: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pnp 00:04: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pnp 00:03: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] system 00:02: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pnp 00:01: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] system 00:00: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] yenta_cardbus 0000:15:00.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci 0000:03:00.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci 0000:02:00.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci 0000:01:00.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] pci 0000:00:1f.3: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] ahci 0000:00:1f.2: freezeMay 5 16:49:19 x3 kernel: [ 1001.112000] ACPI: PCI interrupt for device 0000:00:1f.2 disabledMay 5 16:49:19 x3 kernel: [ 1001.112000] ata_piix 0000:00:1f.1: freezeMay 5 16:49:19 x3 kernel: [ 1001.116000] ata6: ACPI get timing mode failed.May 5 16:49:19 x3 kernel: [ 1001.116000] ACPI: PCI interrupt for device 0000:00:1f.1 disabledMay 5 16:49:19 x3 kernel: [ 1001.116000] pci 0000:00:1f.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.116000] pci 0000:00:1e.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.116000] ehci_hcd 0000:00:1d.7: freezeMay 5 16:49:19 x3 kernel: [ 1001.116000] ACPI: PCI interrupt for device 0000:00:1d.7 disabledMay 5 16:49:19 x3 kernel: [ 1001.132000] uhci_hcd 0000:00:1d.3: freezeMay 5 16:49:19 x3 kernel: [ 1001.132000] ACPI: PCI interrupt for device 0000:00:1d.3 disabledMay 5 16:49:19 x3 kernel: [ 1001.132000] uhci_hcd 0000:00:1d.2: freezeMay 5 16:49:19 x3 kernel: [ 1001.132000] ACPI: PCI interrupt for device 0000:00:1d.2 disabledMay 5 16:49:19 x3 kernel: [ 1001.132000] uhci_hcd 0000:00:1d.1: freezeMay 5 16:49:19 x3 kernel: [ 1001.132000] ACPI: PCI interrupt for device 0000:00:1d.1 disabledMay 5 16:49:19 x3 kernel: [ 1001.132000] uhci_hcd 0000:00:1d.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.132000] ACPI: PCI interrupt for device 0000:00:1d.0 disabledMay 5 16:49:19 x3 kernel: [ 1001.132000] pcieport-driver 0000:00:1c.3: freezeMay 5 16:49:19 x3 kernel: [ 1001.132000] pcieport-driver 0000:00:1c.2: freezeMay 5 16:49:19 x3 kernel: [ 1001.132000] pcieport-driver 0000:00:1c.1: freezeMay 5 16:49:19 x3 kernel: [ 1001.132000] pcieport-driver 0000:00:1c.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.132000] HDA Intel 0000:00:1b.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.140000] ACPI: PCI interrupt for device 0000:00:1b.0 disabledMay 5 16:49:19 x3 kernel: [ 1001.156000] pcieport-driver 0000:00:01.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] agpgart-intel 0000:00:00.0: freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] acpi acpi: freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] PM: snapshotting memory.May 5 16:49:19 x3 kernel: [ 1001.156000] platform bluetooth: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] platform dock.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] iTCO_wdt iTCO_wdt: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] platform vesafb.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] platform eisa.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] i8042 i8042: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] serial8250 serial8250: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pcspkr pcspkr: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] yenta_cardbus 0000:15:00.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pci 0000:03:00.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pci 0000:02:00.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pci 0000:01:00.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pci 0000:00:1f.3: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pci 0000:00:1f.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pci 0000:00:1e.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pcieport-driver 0000:00:1c.3: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pcieport-driver 0000:00:1c.2: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pcieport-driver 0000:00:1c.1: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pcieport-driver 0000:00:1c.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] HDA Intel 0000:00:1b.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] pcieport-driver 0000:00:01.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] agpgart-intel 0000:00:00.0: LATE freezeMay 5 16:49:19 x3 kernel: [ 1001.156000] swsusp: critical section: May 5 16:49:19 x3 kernel: [ 1001.156000] swsusp: Need to copy 60498 pagesMay 5 16:49:19 x3 kernel: [ 1001.156000] swsusp: Normal pages needed: 60498 + 1024 + 14, available pages: 70268May 5 16:49:19 x3 kernel: [ 4466.156000] agpgart-intel 0000:00:00.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pcieport-driver 0000:00:01.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] HDA Intel 0000:00:1b.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pcieport-driver 0000:00:1c.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pcieport-driver 0000:00:1c.1: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pcieport-driver 0000:00:1c.2: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pcieport-driver 0000:00:1c.3: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] uhci_hcd 0000:00:1d.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] uhci_hcd 0000:00:1d.1: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] uhci_hcd 0000:00:1d.2: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] uhci_hcd 0000:00:1d.3: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] ehci_hcd 0000:00:1d.7: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pci 0000:00:1e.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pci 0000:00:1f.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] ata_piix 0000:00:1f.1: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] ahci 0000:00:1f.2: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pci 0000:00:1f.3: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pci 0000:01:00.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pci 0000:02:00.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pci 0000:03:00.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] yenta_cardbus 0000:15:00.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] pcspkr pcspkr: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] serial8250 serial8250: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] i8042 i8042: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] platform eisa.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] platform vesafb.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] iTCO_wdt iTCO_wdt: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] platform dock.0: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] platform bluetooth: EARLY resumeMay 5 16:49:19 x3 kernel: [ 4466.156000] PM: Image restored successfully.May 5 16:49:19 x3 kernel: [ 4466.176000] acpi acpi: resumingMay 5 16:49:19 x3 kernel: [ 4466.180000] agpgart-intel 0000:00:00.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.180000] pcieport-driver 0000:00:01.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.180000] PCI: Setting latency timer of device 0000:00:01.0 to 64May 5 16:49:19 x3 kernel: [ 4466.180000] HDA Intel 0000:00:1b.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.196000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)May 5 16:49:19 x3 kernel: [ 4466.196000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21May 5 16:49:19 x3 kernel: [ 4466.196000] PCI: Setting latency timer of device 0000:00:1b.0 to 64May 5 16:49:19 x3 kernel: [ 4466.268000] pcieport-driver 0000:00:1c.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.268000] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 5 16:49:19 x3 kernel: [ 4466.268000] pcieport-driver 0000:00:1c.1: resumingMay 5 16:49:19 x3 kernel: [ 4466.268000] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 5 16:49:19 x3 kernel: [ 4466.268000] pcieport-driver 0000:00:1c.2: resumingMay 5 16:49:19 x3 kernel: [ 4466.268000] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 5 16:49:19 x3 kernel: [ 4466.268000] pcieport-driver 0000:00:1c.3: resumingMay 5 16:49:19 x3 kernel: [ 4466.268000] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 5 16:49:19 x3 kernel: [ 4466.268000] uhci_hcd 0000:00:1d.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.268000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16May 5 16:49:19 x3 kernel: [ 4466.268000] PCI: Setting latency timer of device 0000:00:1d.0 to 64May 5 16:49:19 x3 kernel: [ 4466.268000] usb usb1: root hub lost power or was resetMay 5 16:49:19 x3 kernel: [ 4466.268000] uhci_hcd 0000:00:1d.1: resumingMay 5 16:49:19 x3 kernel: [ 4466.268000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21May 5 16:49:19 x3 kernel: [ 4466.268000] PCI: Setting latency timer of device 0000:00:1d.1 to 64May 5 16:49:19 x3 kernel: [ 4466.268000] usb usb2: root hub lost power or was resetMay 5 16:49:19 x3 kernel: [ 4466.268000] uhci_hcd 0000:00:1d.2: resumingMay 5 16:49:19 x3 kernel: [ 4466.268000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22May 5 16:49:19 x3 kernel: [ 4466.268000] PCI: Setting latency timer of device 0000:00:1d.2 to 64May 5 16:49:19 x3 kernel: [ 4466.268000] usb usb3: root hub lost power or was resetMay 5 16:49:19 x3 kernel: [ 4466.268000] uhci_hcd 0000:00:1d.3: resumingMay 5 16:49:19 x3 kernel: [ 4466.268000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23May 5 16:49:19 x3 kernel: [ 4466.268000] PCI: Setting latency timer of device 0000:00:1d.3 to 64May 5 16:49:19 x3 kernel: [ 4466.268000] usb usb4: root hub lost power or was resetMay 5 16:49:19 x3 kernel: [ 4466.268000] ehci_hcd 0000:00:1d.7: resumingMay 5 16:49:19 x3 kernel: [ 4466.284000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23May 5 16:49:19 x3 kernel: [ 4466.284000] PCI: Setting latency timer of device 0000:00:1d.7 to 64May 5 16:49:19 x3 kernel: [ 4466.284000] usb usb5: root hub lost power or was resetMay 5 16:49:19 x3 kernel: [ 4466.288000] ehci_hcd 0000:00:1d.7: debug port 1May 5 16:49:19 x3 kernel: [ 4466.288000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7May 5 16:49:19 x3 kernel: [ 4466.288000] pci 0000:00:1e.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.288000] PCI: Setting latency timer of device 0000:00:1e.0 to 64May 5 16:49:19 x3 kernel: [ 4466.288000] pci 0000:00:1f.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.288000] ata_piix 0000:00:1f.1: resumingMay 5 16:49:19 x3 kernel: [ 4466.288000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880001, writing 2880005)May 5 16:49:19 x3 kernel: [ 4466.288000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16May 5 16:49:19 x3 kernel: [ 4466.288000] PCI: Setting latency timer of device 0000:00:1f.1 to 64May 5 16:49:19 x3 kernel: [ 4466.292000] ata6: ACPI set timing mode failed.May 5 16:49:19 x3 kernel: [ 4466.292000] ahci 0000:00:1f.2: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)May 5 16:49:19 x3 kernel: [ 4466.292000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16May 5 16:49:19 x3 kernel: [ 4466.292000] PCI: Setting latency timer of device 0000:00:1f.2 to 64May 5 16:49:19 x3 kernel: [ 4466.292000] pci 0000:00:1f.3: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci 0000:01:00.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci 0000:02:00.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100100, writing 100103)May 5 16:49:19 x3 kernel: [ 4466.292000] pci 0000:03:00.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100102)May 5 16:49:19 x3 kernel: [ 4466.292000] yenta_cardbus 0000:15:00.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] PM: Writing back config space on device 0000:15:00.0 at offset f (was 3c0010b, writing 5c0010b)May 5 16:49:19 x3 kernel: [ 4466.292000] PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 2a808, writing 2a820)May 5 16:49:19 x3 kernel: [ 4466.292000] system 00:00: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pnp 00:01: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] system 00:02: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pnp 00:03: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pnp 00:04: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pnp 00:05: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pnp 00:06: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pnp 00:07: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] i8042 kbd 00:08: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pnp: Device 00:08 does not support activation.May 5 16:49:19 x3 kernel: [ 4466.292000] i8042 aux 00:09: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pnp: Device 00:09 does not support activation.May 5 16:49:19 x3 kernel: [ 4466.292000] pnp 00:0a: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pnp 00:0b: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pcspkr pcspkr: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci_express 0000:00:01.0:pcie00: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci_express 0000:00:1c.0:pcie00: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci_express 0000:00:1c.0:pcie02: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci_express 0000:00:1c.1:pcie00: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci_express 0000:00:1c.1:pcie02: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci_express 0000:00:1c.2:pcie00: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci_express 0000:00:1c.2:pcie02: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci_express 0000:00:1c.3:pcie00: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] pci_express 0000:00:1c.3:pcie02: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] serial8250 serial8250: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] i8042 i8042: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] atkbd serio0: resumingMay 5 16:49:19 x3 kernel: [ 4466.292000] ata6: port disabled. ignoring.May 5 16:49:19 x3 kernel: [ 4466.300000] platform eisa.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.300000] psmouse serio1: resumingMay 5 16:49:19 x3 kernel: [ 4466.604000] ata2: SATA link down (SStatus 0 SControl 0)May 5 16:49:19 x3 kernel: [ 4466.604000] ata3: SATA link down (SStatus 0 SControl 0)May 5 16:49:19 x3 kernel: [ 4466.604000] ata4: SATA link down (SStatus 0 SControl 0)May 5 16:49:19 x3 kernel: [ 4466.872000] platform vesafb.0: resumingMay 5 16:49:19 x3 kernel: [ 4466.872000] sd 0:0:0:0: resumingMay 5 16:49:19 x3 kernel: [ 4466.872000] usb usb1: resumingMay 5 16:49:19 x3 kernel: [ 4466.912000] usb usb2: resumingMay 5 16:49:19 x3 kernel: [ 4466.952000] usb usb3: resumingMay 5 16:49:19 x3 kernel: [ 4466.992000] usb usb4: resumingMay 5 16:49:19 x3 kernel: [ 4467.032000] usb usb5: resumingMay 5 16:49:19 x3 kernel: [ 4467.052000] sr 4:0:0:0: resumingMay 5 16:49:19 x3 kernel: [ 4467.052000] usbdev4.2_ep00: PM: resume from 0, parent 4-2 still 2May 5 16:49:19 x3 kernel: [ 4467.052000] usbdev4.2_ep81: PM: resume from 0, parent 4-2:1.0 still 2May 5 16:49:19 x3 kernel: [ 4467.052000] usbdev4.2_ep02: PM: resume from 0, parent 4-2:1.0 still 2May 5 16:49:19 x3 kernel: [ 4467.052000] usbdev4.2_ep83: PM: resume from 0, parent 4-2:1.0 still 2May 5 16:49:19 x3 kernel: [ 4467.052000] iTCO_wdt iTCO_wdt: resumingMay 5 16:49:19 x3 kernel: [ 4467.052000] psmouse serio2: resumingMay 5 16:49:19 x3 kernel: [ 4467.784000] ata5.00: configured for UDMA/33May 5 16:49:19 x3 kernel: [ 4468.008000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)May 5 16:49:19 x3 kernel: [ 4468.008000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 5 16:49:19 x3 kernel: [ 4468.008000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 5 16:49:19 x3 kernel: [ 4468.008000] ata1.00: configured for UDMA/100May 5 16:49:19 x3 kernel: [ 4468.012000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 5 16:49:19 x3 kernel: [ 4468.016000] sda: Write Protect is offMay 5 16:49:19 x3 kernel: [ 4468.016000] sda: Mode Sense: 00 3a 00 00May 5 16:49:19 x3 kernel: [ 4468.024000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 5 16:49:19 x3 kernel: [ 4469.736000] platform dock.0: resumingMay 5 16:49:19 x3 kernel: [ 4469.736000] platform bluetooth: resumingMay 5 16:49:19 x3 kernel: [ 4469.736000] Restarting tasks ... <6>usb 4-2: USB disconnect, address 2May 5 16:49:19 x3 kernel: [ 4469.796000] done.May 5 16:49:19 x3 kernel: [ 4469.796000] Enabling non-boot CPUs ...May 5 16:49:19 x3 kernel: [ 4469.812000] SMP alternatives: switching to SMP codeMay 5 16:49:19 x3 kernel: [ 4469.812000] Booting processor 1/1 eip 3000May 5 16:49:19 x3 kernel: [ 4469.820000] Initializing CPU#1May 5 16:49:19 x3 kernel: [ 4469.900000] Calibrating delay using timer specific routine.. 3990.18 BogoMIPS (lpj=7980375)May 5 16:49:19 x3 kernel: [ 4469.900000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 5 16:49:19 x3 kernel: [ 4469.900000] monitor/mwait feature present.May 5 16:49:19 x3 kernel: [ 4469.900000] CPU: L1 I cache: 32K, L1 D cache: 32KMay 5 16:49:19 x3 kernel: [ 4469.900000] CPU: L2 cache: 2048KMay 5 16:49:19 x3 kernel: [ 4469.900000] CPU: Physical Processor ID: 0May 5 16:49:19 x3 kernel: [ 4469.900000] CPU: Processor Core ID: 1May 5 16:49:19 x3 kernel: [ 4469.900000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 5 16:49:19 x3 kernel: [ 4469.900000] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 5 16:49:19 x3 kernel: [ 4469.904000] CPU1 is upMay 5 16:49:19 x3 kernel: [ 4470.552000] usb 4-2: new full speed USB device using uhci_hcd and address 3May 5 16:49:19 x3 kernel: [ 4470.728000] usb 4-2: configuration #1 chosen from 1 choiceMay 5 16:49:20 x3 kernel: [ 4471.504000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPIMay 5 16:49:20 x3 kernel: [ 4471.504000] Copyright (c) 1999-2006 Intel Corporation.May 5 16:49:20 x3 kernel: [ 4471.508000] PCI: Enabling device 0000:02:00.0 (0000 -> 0003)May 5 16:49:20 x3 kernel: [ 4471.508000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 5 16:49:20 x3 kernel: [ 4471.508000] PCI: Setting latency timer of device 0000:02:00.0 to 64May 5 16:49:20 x3 kernel: [ 4471.564000] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:58:30:f7:c3May 5 16:49:20 x3 kernel: [ 4471.624000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network ConnectionMay 5 16:49:20 x3 kernel: [ 4471.668000] ieee80211_crypt: registered algorithm 'NULL'May 5 16:49:20 x3 kernel: [ 4471.672000] ieee80211: 802.11 data/management/control stack, git-1.1.13May 5 16:49:20 x3 kernel: [ 4471.672000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>May 5 16:49:20 x3 kernel: [ 4471.704000] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22May 5 16:49:20 x3 kernel: [ 4471.704000] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 5 16:49:20 x3 kernel: [ 4471.740000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpMay 5 16:49:20 x3 kernel: [ 4471.740000] ipw3945: Copyright(c) 2003-2006 Intel CorporationMay 5 16:49:20 x3 kernel: [ 4471.740000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21May 5 16:49:20 x3 kernel: [ 4471.740000] PCI: Setting latency timer of device 0000:03:00.0 to 64May 5 16:49:20 x3 kernel: [ 4471.740000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionMay 5 16:49:23 x3 kernel: [ 4472.820000] input: Power Button (FF) as /class/input/input9May 5 16:49:23 x3 kernel: [ 4472.820000] ACPI: Power Button (FF) [PWRF]May 5 16:49:23 x3 kernel: [ 4472.820000] input: Lid Switch as /class/input/input10May 5 16:49:23 x3 kernel: [ 4472.820000] ACPI: Lid Switch [LID]May 5 16:49:23 x3 kernel: [ 4472.820000] input: Sleep Button (CM) as /class/input/input11May 5 16:49:23 x3 kernel: [ 4472.820000] ACPI: Sleep Button (CM) [SLPB]May 5 16:49:23 x3 kernel: [ 4472.956000] ACPI: Thermal Zone [THM0] (37 C)May 5 16:49:23 x3 kernel: [ 4472.960000] ACPI: Thermal Zone [THM1] (42 C)May 5 16:49:23 x3 kernel: [ 4473.032000] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07May 5 16:49:23 x3 kernel: [ 4473.036000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13May 5 16:49:23 x3 kernel: [ 4473.036000] ibm_acpi: http://ibm-acpi.sf.net/May 5 16:49:23 x3 kernel: [ 4473.144000] ACPI: AC Adapter [AC] (on-line)May 5 16:49:23 x3 kernel: [ 4473.164000] ACPI: Battery Slot [BAT0] (battery absent)May 5 16:49:24 x3 kernel: [ 4473.632000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)May 5 16:49:24 x3 kernel: [ 4473.868000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 5 16:52:23 x3 kernel: [ 4652.580000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes readyMay 5 17:53:30 x3 kernel: [ 4669.732000] eth1: no IPv6 routers presentMay 5 19:01:02 x3 kernel: [ 8722.232000] usb 5-2: new high speed USB device using ehci_hcd and address 4May 5 19:01:03 x3 kernel: [ 8722.364000] usb 5-2: configuration #1 chosen from 2 choicesMay 5 19:01:03 x3 kernel: [ 8723.044000] usbcore: registered new interface driver libusualMay 5 19:01:03 x3 kernel: [ 8723.060000] Initializing USB Mass Storage driver...May 5 19:01:03 x3 kernel: [ 8723.060000] scsi6 : SCSI emulation for USB Mass Storage devicesMay 5 19:01:03 x3 kernel: [ 8723.060000] usb-storage: device found at 4May 5 19:01:03 x3 kernel: [ 8723.060000] usbcore: registered new interface driver usb-storageMay 5 19:01:03 x3 kernel: [ 8723.060000] usb-storage: waiting for device to settle before scanningMay 5 19:01:03 x3 kernel: [ 8723.060000] USB Mass Storage support registered.May 5 19:01:08 x3 kernel: [ 8728.060000] usb-storage: device scan completeMay 5 19:01:08 x3 kernel: [ 8728.060000] scsi 6:0:0:0: Direct-Access Sony Sony DSC 6.00 PQ: 0 ANSI: 0 CCSMay 5 19:01:08 x3 kernel: [ 8728.068000] SCSI device sdb: 960512 512-byte hdwr sectors (492 MB)May 5 19:01:08 x3 kernel: [ 8728.068000] sdb: Write Protect is offMay 5 19:01:08 x3 kernel: [ 8728.068000] sdb: Mode Sense: 00 00 00 00May 5 19:01:08 x3 kernel: [ 8728.068000] sdb: assuming drive cache: write throughMay 5 19:01:08 x3 kernel: [ 8728.088000] SCSI device sdb: 960512 512-byte hdwr sectors (492 MB)May 5 19:01:08 x3 kernel: [ 8728.088000] sdb: Write Protect is offMay 5 19:01:08 x3 kernel: [ 8728.088000] sdb: Mode Sense: 00 00 00 00May 5 19:01:08 x3 kernel: [ 8728.088000] sdb: assuming drive cache: write throughMay 5 19:01:08 x3 kernel: [ 8728.088000] sdb: sdb1May 5 19:01:08 x3 kernel: [ 8728.096000] sd 6:0:0:0: Attached scsi removable disk sdbMay 5 19:01:08 x3 kernel: [ 8728.096000] sd 6:0:0:0: Attached scsi generic sg2 type 0May 5 19:04:19 x3 kernel: [ 8919.056000] usb 5-2: USB disconnect, address 4May 5 23:46:00 x3 kernel: [25819.428000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 5 23:46:00 x3 kernel: [25819.752000] ACPI: PCI interrupt for device 0000:03:00.0 disabledMay 5 23:46:00 x3 kernel: [25819.768000] ieee80211_crypt: unregistered algorithm 'NULL'May 5 23:46:03 x3 kernel: [25822.004000] PM: suspend-to-disk mode set to 'shutdown'May 5 23:46:03 x3 kernel: [25822.004000] Disabling non-boot CPUs ...May 5 23:46:03 x3 kernel: [25822.016000] Breaking affinity for irq 16May 5 23:46:03 x3 kernel: [25822.016000] Breaking affinity for irq 21May 5 23:46:03 x3 kernel: [25822.120000] CPU 1 is now offlineMay 5 23:46:03 x3 kernel: [25822.120000] SMP alternatives: switching to UP codeMay 6 11:29:56 x3 kernel: [25822.176000] CPU1 is downMay 6 11:29:57 x3 kernel: [25822.176000] Stopping tasks ... done.May 6 11:29:57 x3 kernel: [25822.796000] Shrinking memory... ^H-^H\^H|^H/^H-^H\^H|^Hdone (67102 pages freed)May 6 11:29:57 x3 kernel: [25827.700000] Freed 268408 kbytes in 4.91 seconds (54.66 MB/s)May 6 11:29:57 x3 kernel: [25827.700000] Suspending console(s)May 6 11:29:57 x3 kernel: [25827.700000] usbdev4.3_ep83: PM: suspend 0->1, parent 4-2:1.0 already 2May 6 11:29:57 x3 kernel: [25827.700000] usbdev4.3_ep02: PM: suspend 0->1, parent 4-2:1.0 already 2May 6 11:29:57 x3 kernel: [25827.700000] usbdev4.3_ep81: PM: suspend 0->1, parent 4-2:1.0 already 2May 6 11:29:57 x3 kernel: [25827.700000] usb 4-2:1.0: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] usb 4-2:1.0: PM: suspend 2->1, parent 4-2 already 2May 6 11:29:57 x3 kernel: [25827.700000] usbdev4.3_ep00: PM: suspend 0->1, parent 4-2 already 2May 6 11:29:57 x3 kernel: [25827.700000] usb 4-2: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] usb 4-2: PM: suspend 2->1, parent usb4 already 2May 6 11:29:57 x3 kernel: [25827.700000] platform bluetooth: freezeMay 6 11:29:57 x3 kernel: [25827.700000] platform dock.0: freezeMay 6 11:29:57 x3 kernel: [25827.700000] iTCO_wdt iTCO_wdt: freezeMay 6 11:29:57 x3 kernel: [25827.700000] sr 4:0:0:0: freezeMay 6 11:29:57 x3 kernel: [25827.700000] usbdev5.1_ep81: PM: suspend 0->1, parent 5-0:1.0 already 2May 6 11:29:57 x3 kernel: [25827.700000] hub 5-0:1.0: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] hub 5-0:1.0: PM: suspend 2->1, parent usb5 already 2May 6 11:29:57 x3 kernel: [25827.700000] usbdev5.1_ep00: PM: suspend 0->1, parent usb5 already 2May 6 11:29:57 x3 kernel: [25827.700000] usb usb5: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2May 6 11:29:57 x3 kernel: [25827.700000] hub 4-0:1.0: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2May 6 11:29:57 x3 kernel: [25827.700000] usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2May 6 11:29:57 x3 kernel: [25827.700000] usb usb4: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2May 6 11:29:57 x3 kernel: [25827.700000] hub 3-0:1.0: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2May 6 11:29:57 x3 kernel: [25827.700000] usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2May 6 11:29:57 x3 kernel: [25827.700000] usb usb3: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2May 6 11:29:57 x3 kernel: [25827.700000] hub 2-0:1.0: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2May 6 11:29:57 x3 kernel: [25827.700000] usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2May 6 11:29:57 x3 kernel: [25827.700000] usb usb2: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2May 6 11:29:57 x3 kernel: [25827.700000] hub 1-0:1.0: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2May 6 11:29:57 x3 kernel: [25827.700000] usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2May 6 11:29:57 x3 kernel: [25827.700000] usb usb1: PM: suspend 2-->1May 6 11:29:57 x3 kernel: [25827.700000] sd 0:0:0:0: freezeMay 6 11:29:57 x3 kernel: [25827.904000] platform vesafb.0: freezeMay 6 11:29:57 x3 kernel: [25827.904000] platform eisa.0: freezeMay 6 11:29:57 x3 kernel: [25827.904000] i8042 i8042: freezeMay 6 11:29:57 x3 kernel: [25828.876000] serial8250 serial8250: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci_express 0000:00:1c.3:pcie02: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci_express 0000:00:1c.3:pcie00: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci_express 0000:00:1c.2:pcie02: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci_express 0000:00:1c.2:pcie00: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci_express 0000:00:1c.1:pcie02: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci_express 0000:00:1c.1:pcie00: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci_express 0000:00:1c.0:pcie02: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci_express 0000:00:1c.0:pcie00: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci_express 0000:00:01.0:pcie00: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pcspkr pcspkr: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pnp 00:0b: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pnp 00:0a: freezeMay 6 11:29:57 x3 kernel: [25828.880000] i8042 aux 00:09: freezeMay 6 11:29:57 x3 kernel: [25828.880000] i8042 kbd 00:08: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pnp 00:07: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pnp 00:06: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pnp 00:05: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pnp 00:04: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pnp 00:03: freezeMay 6 11:29:57 x3 kernel: [25828.880000] system 00:02: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pnp 00:01: freezeMay 6 11:29:57 x3 kernel: [25828.880000] system 00:00: freezeMay 6 11:29:57 x3 kernel: [25828.880000] yenta_cardbus 0000:15:00.0: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci 0000:03:00.0: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci 0000:02:00.0: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci 0000:01:00.0: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci 0000:00:1f.3: freezeMay 6 11:29:57 x3 kernel: [25828.880000] ahci 0000:00:1f.2: freezeMay 6 11:29:57 x3 kernel: [25828.880000] ACPI: PCI interrupt for device 0000:00:1f.2 disabledMay 6 11:29:57 x3 kernel: [25828.880000] ata_piix 0000:00:1f.1: freezeMay 6 11:29:57 x3 kernel: [25828.880000] ata6: ACPI get timing mode failed.May 6 11:29:57 x3 kernel: [25828.880000] ACPI: PCI interrupt for device 0000:00:1f.1 disabledMay 6 11:29:57 x3 kernel: [25828.880000] pci 0000:00:1f.0: freezeMay 6 11:29:57 x3 kernel: [25828.880000] pci 0000:00:1e.0: freezeMay 6 11:29:57 x3 kernel: [25828.880000] ehci_hcd 0000:00:1d.7: freezeMay 6 11:29:57 x3 kernel: [25828.880000] ACPI: PCI interrupt for device 0000:00:1d.7 disabledMay 6 11:29:57 x3 kernel: [25828.896000] uhci_hcd 0000:00:1d.3: freezeMay 6 11:29:57 x3 kernel: [25828.896000] ACPI: PCI interrupt for device 0000:00:1d.3 disabledMay 6 11:29:57 x3 kernel: [25828.896000] uhci_hcd 0000:00:1d.2: freezeMay 6 11:29:57 x3 kernel: [25828.896000] ACPI: PCI interrupt for device 0000:00:1d.2 disabledMay 6 11:29:57 x3 kernel: [25828.896000] uhci_hcd 0000:00:1d.1: freezeMay 6 11:29:57 x3 kernel: [25828.896000] ACPI: PCI interrupt for device 0000:00:1d.1 disabledMay 6 11:29:57 x3 kernel: [25828.896000] uhci_hcd 0000:00:1d.0: freezeMay 6 11:29:57 x3 kernel: [25828.896000] ACPI: PCI interrupt for device 0000:00:1d.0 disabledMay 6 11:29:57 x3 kernel: [25828.896000] pcieport-driver 0000:00:1c.3: freezeMay 6 11:29:57 x3 kernel: [25828.896000] pcieport-driver 0000:00:1c.2: freezeMay 6 11:29:57 x3 kernel: [25828.896000] pcieport-driver 0000:00:1c.1: freezeMay 6 11:29:57 x3 kernel: [25828.896000] pcieport-driver 0000:00:1c.0: freezeMay 6 11:29:57 x3 kernel: [25828.896000] HDA Intel 0000:00:1b.0: freezeMay 6 11:29:57 x3 kernel: [25828.904000] ACPI: PCI interrupt for device 0000:00:1b.0 disabledMay 6 11:29:57 x3 kernel: [25828.920000] pcieport-driver 0000:00:01.0: freezeMay 6 11:29:57 x3 kernel: [25828.920000] agpgart-intel 0000:00:00.0: freezeMay 6 11:29:57 x3 kernel: [25828.920000] acpi acpi: freezeMay 6 11:29:57 x3 kernel: [25828.920000] PM: snapshotting memory.May 6 11:29:57 x3 kernel: [25828.920000] platform bluetooth: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] platform dock.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] iTCO_wdt iTCO_wdt: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] platform vesafb.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] platform eisa.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] i8042 i8042: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] serial8250 serial8250: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pcspkr pcspkr: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] yenta_cardbus 0000:15:00.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pci 0000:03:00.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pci 0000:02:00.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pci 0000:01:00.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pci 0000:00:1f.3: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pci 0000:00:1f.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pci 0000:00:1e.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pcieport-driver 0000:00:1c.3: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pcieport-driver 0000:00:1c.2: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pcieport-driver 0000:00:1c.1: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pcieport-driver 0000:00:1c.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] HDA Intel 0000:00:1b.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] pcieport-driver 0000:00:01.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] agpgart-intel 0000:00:00.0: LATE freezeMay 6 11:29:57 x3 kernel: [25828.920000] swsusp: critical section: May 6 11:29:57 x3 kernel: [25828.920000] swsusp: Need to copy 58656 pagesMay 6 11:29:57 x3 kernel: [25828.920000] swsusp: Normal pages needed: 58656 + 1024 + 14, available pages: 72110May 6 11:29:57 x3 kernel: [68048.920000] agpgart-intel 0000:00:00.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pcieport-driver 0000:00:01.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] HDA Intel 0000:00:1b.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pcieport-driver 0000:00:1c.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pcieport-driver 0000:00:1c.1: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pcieport-driver 0000:00:1c.2: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pcieport-driver 0000:00:1c.3: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] uhci_hcd 0000:00:1d.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] uhci_hcd 0000:00:1d.1: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] uhci_hcd 0000:00:1d.2: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] uhci_hcd 0000:00:1d.3: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] ehci_hcd 0000:00:1d.7: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pci 0000:00:1e.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pci 0000:00:1f.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] ata_piix 0000:00:1f.1: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] ahci 0000:00:1f.2: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pci 0000:00:1f.3: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pci 0000:01:00.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pci 0000:02:00.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pci 0000:03:00.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] yenta_cardbus 0000:15:00.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] pcspkr pcspkr: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] serial8250 serial8250: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] i8042 i8042: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] platform eisa.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] platform vesafb.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] iTCO_wdt iTCO_wdt: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] platform dock.0: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] platform bluetooth: EARLY resumeMay 6 11:29:57 x3 kernel: [68048.920000] PM: Image restored successfully.May 6 11:29:57 x3 kernel: [68048.940000] acpi acpi: resumingMay 6 11:29:57 x3 kernel: [68048.944000] agpgart-intel 0000:00:00.0: resumingMay 6 11:29:57 x3 kernel: [68048.944000] pcieport-driver 0000:00:01.0: resumingMay 6 11:29:57 x3 kernel: [68048.944000] PCI: Setting latency timer of device 0000:00:01.0 to 64May 6 11:29:57 x3 kernel: [68048.944000] HDA Intel 0000:00:1b.0: resumingMay 6 11:29:57 x3 kernel: [68048.960000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)May 6 11:29:57 x3 kernel: [68048.960000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21May 6 11:29:57 x3 kernel: [68048.960000] PCI: Setting latency timer of device 0000:00:1b.0 to 64May 6 11:29:57 x3 kernel: [68050.016000] hda_intel: azx_get_response timeout, switching to polling mode...May 6 11:29:57 x3 kernel: [68050.032000] pcieport-driver 0000:00:1c.0: resumingMay 6 11:29:57 x3 kernel: [68050.032000] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 6 11:29:57 x3 kernel: [68050.032000] pcieport-driver 0000:00:1c.1: resumingMay 6 11:29:57 x3 kernel: [68050.032000] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 6 11:29:57 x3 kernel: [68050.032000] pcieport-driver 0000:00:1c.2: resumingMay 6 11:29:57 x3 kernel: [68050.032000] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 6 11:29:57 x3 kernel: [68050.032000] pcieport-driver 0000:00:1c.3: resumingMay 6 11:29:57 x3 kernel: [68050.032000] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 6 11:29:57 x3 kernel: [68050.032000] uhci_hcd 0000:00:1d.0: resumingMay 6 11:29:57 x3 kernel: [68050.032000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 11:29:57 x3 kernel: [68050.032000] PCI: Setting latency timer of device 0000:00:1d.0 to 64May 6 11:29:57 x3 kernel: [68050.032000] usb usb1: root hub lost power or was resetMay 6 11:29:57 x3 kernel: [68050.032000] uhci_hcd 0000:00:1d.1: resumingMay 6 11:29:57 x3 kernel: [68050.032000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21May 6 11:29:57 x3 kernel: [68050.032000] PCI: Setting latency timer of device 0000:00:1d.1 to 64May 6 11:29:57 x3 kernel: [68050.032000] usb usb2: root hub lost power or was resetMay 6 11:29:57 x3 kernel: [68050.032000] uhci_hcd 0000:00:1d.2: resumingMay 6 11:29:57 x3 kernel: [68050.032000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22May 6 11:29:57 x3 kernel: [68050.032000] PCI: Setting latency timer of device 0000:00:1d.2 to 64May 6 11:29:57 x3 kernel: [68050.032000] usb usb3: root hub lost power or was resetMay 6 11:29:57 x3 kernel: [68050.032000] uhci_hcd 0000:00:1d.3: resumingMay 6 11:29:57 x3 kernel: [68050.032000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23May 6 11:29:57 x3 kernel: [68050.032000] PCI: Setting latency timer of device 0000:00:1d.3 to 64May 6 11:29:57 x3 kernel: [68050.032000] usb usb4: root hub lost power or was resetMay 6 11:29:57 x3 kernel: [68050.032000] ehci_hcd 0000:00:1d.7: resumingMay 6 11:29:57 x3 kernel: [68050.048000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23May 6 11:29:57 x3 kernel: [68050.048000] PCI: Setting latency timer of device 0000:00:1d.7 to 64May 6 11:29:57 x3 kernel: [68050.048000] usb usb5: root hub lost power or was resetMay 6 11:29:57 x3 kernel: [68050.052000] ehci_hcd 0000:00:1d.7: debug port 1May 6 11:29:57 x3 kernel: [68050.052000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7May 6 11:29:57 x3 kernel: [68050.052000] pci 0000:00:1e.0: resumingMay 6 11:29:57 x3 kernel: [68050.052000] PCI: Setting latency timer of device 0000:00:1e.0 to 64May 6 11:29:57 x3 kernel: [68050.052000] pci 0000:00:1f.0: resumingMay 6 11:29:57 x3 kernel: [68050.052000] ata_piix 0000:00:1f.1: resumingMay 6 11:29:57 x3 kernel: [68050.052000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880001, writing 2880005)May 6 11:29:57 x3 kernel: [68050.052000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16May 6 11:29:57 x3 kernel: [68050.052000] PCI: Setting latency timer of device 0000:00:1f.1 to 64May 6 11:29:57 x3 kernel: [68050.056000] ata6: ACPI set timing mode failed.May 6 11:29:57 x3 kernel: [68050.056000] ata6: port disabled. ignoring.May 6 11:29:57 x3 kernel: [68050.056000] ahci 0000:00:1f.2: resumingMay 6 11:29:57 x3 kernel: [68050.056000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)May 6 11:29:57 x3 kernel: [68050.056000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16May 6 11:29:57 x3 kernel: [68050.056000] PCI: Setting latency timer of device 0000:00:1f.2 to 64May 6 11:29:57 x3 kernel: [68050.056000] pci 0000:00:1f.3: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci 0000:01:00.0: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci 0000:02:00.0: resumingMay 6 11:29:57 x3 kernel: [68050.056000] PM: Writing back config space on device 0000:02:00.0 at offset f (was 10b, writing 100)May 6 11:29:57 x3 kernel: [68050.056000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100100, writing 100003)May 6 11:29:57 x3 kernel: [68050.056000] pci 0000:03:00.0: resumingMay 6 11:29:57 x3 kernel: [68050.056000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100102)May 6 11:29:57 x3 kernel: [68050.056000] yenta_cardbus 0000:15:00.0: resumingMay 6 11:29:57 x3 kernel: [68050.056000] PM: Writing back config space on device 0000:15:00.0 at offset f (was 3c0010b, writing 5c0010b)May 6 11:29:57 x3 kernel: [68050.056000] PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 2a808, writing 2a820)May 6 11:29:57 x3 kernel: [68050.056000] system 00:00: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pnp 00:01: resumingMay 6 11:29:57 x3 kernel: [68050.056000] system 00:02: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pnp 00:03: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pnp 00:04: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pnp 00:05: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pnp 00:06: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pnp 00:07: resumingMay 6 11:29:57 x3 kernel: [68050.056000] i8042 kbd 00:08: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pnp: Device 00:08 does not support activation.May 6 11:29:57 x3 kernel: [68050.056000] i8042 aux 00:09: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pnp: Device 00:09 does not support activation.May 6 11:29:57 x3 kernel: [68050.056000] pnp 00:0a: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pnp 00:0b: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pcspkr pcspkr: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci_express 0000:00:01.0:pcie00: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci_express 0000:00:1c.0:pcie00: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci_express 0000:00:1c.0:pcie02: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci_express 0000:00:1c.1:pcie00: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci_express 0000:00:1c.1:pcie02: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci_express 0000:00:1c.2:pcie00: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci_express 0000:00:1c.2:pcie02: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci_express 0000:00:1c.3:pcie00: resumingMay 6 11:29:57 x3 kernel: [68050.056000] pci_express 0000:00:1c.3:pcie02: resumingMay 6 11:29:57 x3 kernel: [68050.056000] serial8250 serial8250: resumingMay 6 11:29:57 x3 kernel: [68050.056000] i8042 i8042: resumingMay 6 11:29:57 x3 kernel: [68050.056000] atkbd serio0: resumingMay 6 11:29:57 x3 kernel: [68050.064000] platform eisa.0: resumingMay 6 11:29:57 x3 kernel: [68050.064000] psmouse serio1: resumingMay 6 11:29:57 x3 kernel: [68050.368000] ata2: SATA link down (SStatus 0 SControl 0)May 6 11:29:57 x3 kernel: [68050.368000] ata3: SATA link down (SStatus 0 SControl 0)May 6 11:29:57 x3 kernel: [68050.368000] ata4: SATA link down (SStatus 0 SControl 0)May 6 11:29:57 x3 kernel: [68050.636000] platform vesafb.0: resumingMay 6 11:29:57 x3 kernel: [68050.636000] sd 0:0:0:0: resumingMay 6 11:29:57 x3 kernel: [68050.636000] usb usb1: resumingMay 6 11:29:57 x3 kernel: [68050.676000] usb usb2: resumingMay 6 11:29:57 x3 kernel: [68050.716000] usb usb3: resumingMay 6 11:29:57 x3 kernel: [68050.756000] usb usb4: resumingMay 6 11:29:57 x3 kernel: [68050.796000] usb usb5: resumingMay 6 11:29:57 x3 kernel: [68050.816000] sr 4:0:0:0: resumingMay 6 11:29:57 x3 kernel: [68050.816000] iTCO_wdt iTCO_wdt: resumingMay 6 11:29:57 x3 kernel: [68050.816000] psmouse serio2: resumingMay 6 11:29:57 x3 kernel: [68051.548000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)May 6 11:29:57 x3 kernel: [68051.548000] ata5.00: configured for UDMA/33May 6 11:29:57 x3 kernel: [68051.548000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 6 11:29:57 x3 kernel: [68051.548000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 6 11:29:57 x3 kernel: [68051.548000] ata1.00: configured for UDMA/100May 6 11:29:57 x3 kernel: [68051.548000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 6 11:29:57 x3 kernel: [68051.552000] sda: Write Protect is offMay 6 11:29:57 x3 kernel: [68051.552000] sda: Mode Sense: 00 3a 00 00May 6 11:29:57 x3 kernel: [68051.556000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 6 11:29:57 x3 kernel: [68053.504000] platform dock.0: resumingMay 6 11:29:57 x3 kernel: [68053.504000] platform bluetooth: resumingMay 6 11:29:57 x3 kernel: [68053.504000] usbdev4.3_ep00: PM: resume from 0, parent 4-2 still 2May 6 11:29:57 x3 kernel: [68053.504000] usbdev4.3_ep81: PM: resume from 0, parent 4-2:1.0 still 2May 6 11:29:57 x3 kernel: [68053.504000] usbdev4.3_ep02: PM: resume from 0, parent 4-2:1.0 still 2May 6 11:29:57 x3 kernel: [68053.504000] usbdev4.3_ep83: PM: resume from 0, parent 4-2:1.0 still 2May 6 11:29:57 x3 kernel: [68053.504000] Restarting tasks ... <6>usb 4-2: USB disconnect, address 3May 6 11:29:57 x3 kernel: [68053.528000] done.May 6 11:29:57 x3 kernel: [68053.528000] Enabling non-boot CPUs ...May 6 11:29:57 x3 kernel: [68053.544000] SMP alternatives: switching to SMP codeMay 6 11:29:57 x3 kernel: [68053.544000] Booting processor 1/1 eip 3000May 6 11:29:57 x3 kernel: [68053.552000] Initializing CPU#1May 6 11:29:57 x3 kernel: [68053.632000] Calibrating delay using timer specific routine.. 3990.20 BogoMIPS (lpj=7980410)May 6 11:29:57 x3 kernel: [68053.632000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 6 11:29:57 x3 kernel: [68053.632000] monitor/mwait feature present.May 6 11:29:57 x3 kernel: [68053.632000] CPU: L1 I cache: 32K, L1 D cache: 32KMay 6 11:29:57 x3 kernel: [68053.632000] CPU: L2 cache: 2048KMay 6 11:29:57 x3 kernel: [68053.632000] CPU: Physical Processor ID: 0May 6 11:29:57 x3 kernel: [68053.632000] CPU: Processor Core ID: 1May 6 11:29:57 x3 kernel: [68053.632000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 6 11:29:57 x3 kernel: [68053.632000] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 6 11:29:57 x3 kernel: [68053.636000] CPU1 is upMay 6 11:29:57 x3 kernel: [68054.316000] usb 4-2: new full speed USB device using uhci_hcd and address 4May 6 11:29:57 x3 kernel: [68054.492000] usb 4-2: configuration #1 chosen from 1 choiceMay 6 11:30:07 x3 kernel: [68065.384000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPIMay 6 11:30:07 x3 kernel: [68065.384000] Copyright (c) 1999-2006 Intel Corporation.May 6 11:30:07 x3 kernel: [68065.384000] PCI: Enabling device 0000:02:00.0 (0000 -> 0003)May 6 11:30:07 x3 kernel: [68065.384000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 11:30:07 x3 kernel: [68065.384000] PCI: Setting latency timer of device 0000:02:00.0 to 64May 6 11:30:07 x3 kernel: [68065.440000] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:58:30:f7:c3May 6 11:30:07 x3 kernel: [68065.500000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network ConnectionMay 6 11:30:08 x3 kernel: [68065.892000] ieee80211_crypt: registered algorithm 'NULL'May 6 11:30:08 x3 kernel: [68066.220000] ieee80211: 802.11 data/management/control stack, git-1.1.13May 6 11:30:08 x3 kernel: [68066.220000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>May 6 11:30:08 x3 kernel: [68066.676000] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22May 6 11:30:08 x3 kernel: [68066.676000] ADDRCONF(NETDEV_UP): eth0: link is not readyMay 6 11:30:09 x3 kernel: [68066.936000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpMay 6 11:30:09 x3 kernel: [68066.936000] ipw3945: Copyright(c) 2003-2006 Intel CorporationMay 6 11:30:09 x3 kernel: [68066.940000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21May 6 11:30:09 x3 kernel: [68066.940000] PCI: Setting latency timer of device 0000:03:00.0 to 64May 6 11:30:09 x3 kernel: [68066.940000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionMay 6 11:30:12 x3 kernel: [68069.872000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)May 6 11:30:12 x3 kernel: [68070.120000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 6 10:29:24 x3 kernel: [68073.284000] input: Power Button (FF) as /class/input/input12May 6 10:29:24 x3 kernel: [68073.284000] ACPI: Power Button (FF) [PWRF]May 6 10:29:24 x3 kernel: [68073.284000] input: Lid Switch as /class/input/input13May 6 10:29:24 x3 kernel: [68073.284000] ACPI: Lid Switch [LID]May 6 10:29:24 x3 kernel: [68073.284000] input: Sleep Button (CM) as /class/input/input14May 6 10:29:24 x3 kernel: [68073.284000] ACPI: Sleep Button (CM) [SLPB]May 6 10:29:24 x3 kernel: [68073.528000] ACPI: Thermal Zone [THM0] (39 C)May 6 10:29:24 x3 kernel: [68073.532000] ACPI: Thermal Zone [THM1] (35 C)May 6 10:29:24 x3 kernel: [68073.996000] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07May 6 10:29:24 x3 kernel: [68073.996000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13May 6 10:29:24 x3 kernel: [68073.996000] ibm_acpi: http://ibm-acpi.sf.net/May 6 10:29:25 x3 kernel: [68074.192000] ACPI: AC Adapter [AC] (off-line)May 6 10:29:25 x3 kernel: [68074.340000] ACPI: Battery Slot [BAT0] (battery present)May 6 10:30:17 x3 kernel: [68126.756000] usb 5-1: new high speed USB device using ehci_hcd and address 6May 6 10:30:17 x3 kernel: [68126.888000] usb 5-1: configuration #1 chosen from 1 choiceMay 6 10:30:17 x3 kernel: [68126.888000] scsi7 : SCSI emulation for USB Mass Storage devicesMay 6 10:30:17 x3 kernel: [68126.888000] usb-storage: device found at 6May 6 10:30:17 x3 kernel: [68126.888000] usb-storage: waiting for device to settle before scanningMay 6 10:30:22 x3 kernel: [68131.888000] usb-storage: device scan completeMay 6 10:30:22 x3 kernel: [68131.888000] scsi 7:0:0:0: Direct-Access USB FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCSMay 6 10:30:24 x3 kernel: [68133.944000] SCSI device sdb: 8060928 512-byte hdwr sectors (4127 MB)May 6 10:30:24 x3 kernel: [68133.944000] sdb: Write Protect is offMay 6 10:30:24 x3 kernel: [68133.944000] sdb: Mode Sense: 23 00 00 00May 6 10:30:24 x3 kernel: [68133.944000] sdb: assuming drive cache: write throughMay 6 10:30:24 x3 kernel: [68133.944000] SCSI device sdb: 8060928 512-byte hdwr sectors (4127 MB)May 6 10:30:24 x3 kernel: [68133.944000] sdb: Write Protect is offMay 6 10:30:24 x3 kernel: [68133.944000] sdb: Mode Sense: 23 00 00 00May 6 10:30:24 x3 kernel: [68133.944000] sdb: assuming drive cache: write throughMay 6 10:30:24 x3 kernel: [68133.944000] sdb: sdb1May 6 10:30:24 x3 kernel: [68133.948000] sd 7:0:0:0: Attached scsi removable disk sdbMay 6 10:30:24 x3 kernel: [68133.948000] sd 7:0:0:0: Attached scsi generic sg2 type 0May 6 10:31:28 x3 kernel: [68198.004000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes readyMay 6 11:32:34 x3 kernel: [68213.896000] eth1: no IPv6 routers presentMay 6 11:33:58 x3 kernel: [68297.136000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 6 11:33:58 x3 kernel: [68297.336000] ACPI: PCI interrupt for device 0000:03:00.0 disabledMay 6 11:33:58 x3 kernel: [68297.344000] ieee80211_crypt: unregistered algorithm 'NULL'May 6 11:34:00 x3 kernel: [68299.204000] PM: suspend-to-disk mode set to 'shutdown'May 6 11:34:00 x3 kernel: [68299.204000] Disabling non-boot CPUs ...May 6 11:34:00 x3 kernel: [68299.220000] Breaking affinity for irq 0May 6 11:34:00 x3 kernel: [68299.220000] Breaking affinity for irq 16May 6 11:34:00 x3 kernel: [68299.220000] Breaking affinity for irq 21May 6 11:34:00 x3 kernel: [68299.324000] CPU 1 is now offlineMay 6 11:34:00 x3 kernel: [68299.324000] SMP alternatives: switching to UP codeMay 6 11:41:14 x3 kernel: [68299.380000] CPU1 is downMay 6 11:41:14 x3 kernel: [68299.380000] Stopping tasks ... done.May 6 11:41:14 x3 kernel: [68300.252000] Shrinking memory... ^H-^H\^H|^H/^H-^H\^Hdone (48525 pages freed)May 6 11:41:14 x3 kernel: [68303.960000] Freed 194100 kbytes in 3.71 seconds (52.31 MB/s)May 6 11:41:14 x3 kernel: [68303.960000] Suspending console(s)May 6 11:41:14 x3 kernel: [68303.960000] sd 7:0:0:0: freezeMay 6 11:41:14 x3 kernel: [68303.960000] usb-storage 5-1:1.0: freezeMay 6 11:41:14 x3 kernel: [68303.960000] usb 5-1: freezeMay 6 11:41:14 x3 kernel: [68303.976000] usbdev4.4_ep83: PM: suspend 0->1, parent 4-2:1.0 already 2May 6 11:41:14 x3 kernel: [68303.976000] usbdev4.4_ep02: PM: suspend 0->1, parent 4-2:1.0 already 2May 6 11:41:14 x3 kernel: [68303.976000] usbdev4.4_ep81: PM: suspend 0->1, parent 4-2:1.0 already 2May 6 11:41:14 x3 kernel: [68303.976000] usb 4-2:1.0: PM: suspend 2-->1May 6 11:41:14 x3 kernel: [68303.976000] usb 4-2:1.0: PM: suspend 2->1, parent 4-2 already 2May 6 11:41:14 x3 kernel: [68303.976000] usbdev4.4_ep00: PM: suspend 0->1, parent 4-2 already 2May 6 11:41:14 x3 kernel: [68303.976000] usb 4-2: PM: suspend 2-->1May 6 11:41:14 x3 kernel: [68303.976000] usb 4-2: PM: suspend 2->1, parent usb4 already 2May 6 11:41:14 x3 kernel: [68303.976000] platform bluetooth: freezeMay 6 11:41:14 x3 kernel: [68303.976000] platform dock.0: freezeMay 6 11:41:14 x3 kernel: [68303.976000] iTCO_wdt iTCO_wdt: freezeMay 6 11:41:14 x3 kernel: [68303.976000] sr 4:0:0:0: freezeMay 6 11:41:14 x3 kernel: [68303.976000] hub 5-0:1.0: freezeMay 6 11:41:14 x3 kernel: [68303.976000] usb usb5: freezeMay 6 11:41:14 x3 kernel: [68303.976000] usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2May 6 11:41:14 x3 kernel: [68303.976000] hub 4-0:1.0: PM: suspend 2-->1May 6 11:41:14 x3 kernel: [68303.976000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2May 6 11:41:14 x3 kernel: [68303.976000] usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2May 6 11:41:14 x3 kernel: [68303.976000] usb usb4: PM: suspend 2-->1May 6 11:41:14 x3 kernel: [68303.976000] usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2May 6 11:41:14 x3 kernel: [68303.976000] hub 3-0:1.0: PM: suspend 2-->1May 6 11:41:14 x3 kernel: [68303.976000] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2May 6 11:41:14 x3 kernel: [68303.976000] usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2May 6 11:41:14 x3 kernel: [68303.976000] usb usb3: PM: suspend 2-->1May 6 11:41:14 x3 kernel: [68303.976000] usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2May 6 11:41:14 x3 kernel: [68303.976000] hub 2-0:1.0: PM: suspend 2-->1May 6 11:41:14 x3 kernel: [68303.976000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2May 6 11:41:14 x3 kernel: [68303.976000] usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2May 6 11:41:14 x3 kernel: [68303.976000] usb usb2: PM: suspend 2-->1May 6 11:41:14 x3 kernel: [68303.976000] usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2May 6 11:41:14 x3 kernel: [68303.976000] hub 1-0:1.0: PM: suspend 2-->1May 6 11:41:14 x3 kernel: [68303.976000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2May 6 11:41:14 x3 kernel: [68303.976000] usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2May 6 11:41:14 x3 kernel: [68303.976000] usb usb1: PM: suspend 2-->1May 6 11:41:14 x3 kernel: [68303.976000] sd 0:0:0:0: freezeMay 6 11:41:14 x3 kernel: [68304.180000] platform vesafb.0: freezeMay 6 11:41:14 x3 kernel: [68304.180000] platform eisa.0: freezeMay 6 11:41:14 x3 kernel: [68304.180000] i8042 i8042: freezeMay 6 11:41:14 x3 kernel: [68305.152000] serial8250 serial8250: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci_express 0000:00:1c.3:pcie02: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci_express 0000:00:1c.3:pcie00: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci_express 0000:00:1c.2:pcie02: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci_express 0000:00:1c.2:pcie00: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci_express 0000:00:1c.1:pcie02: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci_express 0000:00:1c.1:pcie00: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci_express 0000:00:1c.0:pcie02: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci_express 0000:00:1c.0:pcie00: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci_express 0000:00:01.0:pcie00: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pcspkr pcspkr: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pnp 00:0b: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pnp 00:0a: freezeMay 6 11:41:14 x3 kernel: [68305.152000] i8042 aux 00:09: freezeMay 6 11:41:14 x3 kernel: [68305.152000] i8042 kbd 00:08: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pnp 00:07: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pnp 00:06: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pnp 00:05: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pnp 00:04: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pnp 00:03: freezeMay 6 11:41:14 x3 kernel: [68305.152000] system 00:02: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pnp 00:01: freezeMay 6 11:41:14 x3 kernel: [68305.152000] system 00:00: freezeMay 6 11:41:14 x3 kernel: [68305.152000] yenta_cardbus 0000:15:00.0: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci 0000:03:00.0: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci 0000:02:00.0: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci 0000:01:00.0: freezeMay 6 11:41:14 x3 kernel: [68305.152000] pci 0000:00:1f.3: freezeMay 6 11:41:14 x3 kernel: [68305.152000] ahci 0000:00:1f.2: freezeMay 6 11:41:14 x3 kernel: [68305.152000] ACPI: PCI interrupt for device 0000:00:1f.2 disabledMay 6 11:41:14 x3 kernel: [68305.152000] ata_piix 0000:00:1f.1: freezeMay 6 11:41:14 x3 kernel: [68305.156000] ata6: ACPI get timing mode failed.May 6 11:41:14 x3 kernel: [68305.156000] ACPI: PCI interrupt for device 0000:00:1f.1 disabledMay 6 11:41:14 x3 kernel: [68305.156000] pci 0000:00:1f.0: freezeMay 6 11:41:14 x3 kernel: [68305.156000] pci 0000:00:1e.0: freezeMay 6 11:41:14 x3 kernel: [68305.156000] ehci_hcd 0000:00:1d.7: freezeMay 6 11:41:14 x3 kernel: [68305.156000] ACPI: PCI interrupt for device 0000:00:1d.7 disabledMay 6 11:41:14 x3 kernel: [68305.172000] uhci_hcd 0000:00:1d.3: freezeMay 6 11:41:14 x3 kernel: [68305.172000] ACPI: PCI interrupt for device 0000:00:1d.3 disabledMay 6 11:41:14 x3 kernel: [68305.172000] uhci_hcd 0000:00:1d.2: freezeMay 6 11:41:14 x3 kernel: [68305.172000] ACPI: PCI interrupt for device 0000:00:1d.2 disabledMay 6 11:41:14 x3 kernel: [68305.172000] uhci_hcd 0000:00:1d.1: freezeMay 6 11:41:14 x3 kernel: [68305.172000] ACPI: PCI interrupt for device 0000:00:1d.1 disabledMay 6 11:41:14 x3 kernel: [68305.172000] uhci_hcd 0000:00:1d.0: freezeMay 6 11:41:14 x3 kernel: [68305.172000] ACPI: PCI interrupt for device 0000:00:1d.0 disabledMay 6 11:41:14 x3 kernel: [68305.172000] pcieport-driver 0000:00:1c.3: freezeMay 6 11:41:14 x3 kernel: [68305.172000] pcieport-driver 0000:00:1c.2: freezeMay 6 11:41:14 x3 kernel: [68305.172000] pcieport-driver 0000:00:1c.1: freezeMay 6 11:41:14 x3 kernel: [68305.172000] pcieport-driver 0000:00:1c.0: freezeMay 6 11:41:14 x3 kernel: [68305.172000] HDA Intel 0000:00:1b.0: freezeMay 6 11:41:14 x3 kernel: [68305.180000] ACPI: PCI interrupt for device 0000:00:1b.0 disabledMay 6 11:41:14 x3 kernel: [68305.196000] pcieport-driver 0000:00:01.0: freezeMay 6 11:41:14 x3 kernel: [68305.196000] agpgart-intel 0000:00:00.0: freezeMay 6 11:41:14 x3 kernel: [68305.196000] acpi acpi: freezeMay 6 11:41:14 x3 kernel: [68305.196000] PM: snapshotting memory.May 6 11:41:14 x3 kernel: [68305.196000] platform bluetooth: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] platform dock.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] iTCO_wdt iTCO_wdt: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] platform vesafb.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] platform eisa.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] i8042 i8042: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] serial8250 serial8250: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pcspkr pcspkr: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] yenta_cardbus 0000:15:00.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pci 0000:03:00.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pci 0000:02:00.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pci 0000:01:00.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pci 0000:00:1f.3: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pci 0000:00:1f.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pci 0000:00:1e.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pcieport-driver 0000:00:1c.3: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pcieport-driver 0000:00:1c.2: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pcieport-driver 0000:00:1c.1: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pcieport-driver 0000:00:1c.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] HDA Intel 0000:00:1b.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] pcieport-driver 0000:00:01.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] agpgart-intel 0000:00:00.0: LATE freezeMay 6 11:41:14 x3 kernel: [68305.196000] swsusp: critical section: May 6 11:41:14 x3 kernel: [68305.196000] swsusp: Need to copy 60002 pagesMay 6 11:41:14 x3 kernel: [68305.196000] swsusp: Normal pages needed: 60002 + 1024 + 14, available pages: 70764May 6 11:41:14 x3 kernel: [68730.196000] agpgart-intel 0000:00:00.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pcieport-driver 0000:00:01.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] HDA Intel 0000:00:1b.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pcieport-driver 0000:00:1c.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pcieport-driver 0000:00:1c.1: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pcieport-driver 0000:00:1c.2: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pcieport-driver 0000:00:1c.3: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] uhci_hcd 0000:00:1d.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] uhci_hcd 0000:00:1d.1: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] uhci_hcd 0000:00:1d.2: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] uhci_hcd 0000:00:1d.3: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] ehci_hcd 0000:00:1d.7: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pci 0000:00:1e.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pci 0000:00:1f.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] ata_piix 0000:00:1f.1: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] ahci 0000:00:1f.2: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pci 0000:00:1f.3: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pci 0000:01:00.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pci 0000:02:00.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pci 0000:03:00.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] yenta_cardbus 0000:15:00.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] pcspkr pcspkr: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] serial8250 serial8250: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] i8042 i8042: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] platform eisa.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] platform vesafb.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] iTCO_wdt iTCO_wdt: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] platform dock.0: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] platform bluetooth: EARLY resumeMay 6 11:41:14 x3 kernel: [68730.196000] PM: Image restored successfully.May 6 11:41:14 x3 kernel: [68730.204000] acpi acpi: resumingMay 6 11:41:14 x3 kernel: [68730.204000] agpgart-intel 0000:00:00.0: resumingMay 6 11:41:14 x3 kernel: [68730.204000] pcieport-driver 0000:00:01.0: resumingMay 6 11:41:14 x3 kernel: [68730.204000] PCI: Setting latency timer of device 0000:00:01.0 to 64May 6 11:41:14 x3 kernel: [68730.204000] HDA Intel 0000:00:1b.0: resumingMay 6 11:41:14 x3 kernel: [68730.220000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)May 6 11:41:14 x3 kernel: [68730.220000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21May 6 11:41:14 x3 kernel: [68730.220000] PCI: Setting latency timer of device 0000:00:1b.0 to 64May 6 11:41:14 x3 kernel: [68730.292000] pcieport-driver 0000:00:1c.0: resumingMay 6 11:41:14 x3 kernel: [68730.292000] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 6 11:41:14 x3 kernel: [68730.292000] pcieport-driver 0000:00:1c.1: resumingMay 6 11:41:14 x3 kernel: [68730.292000] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 6 11:41:14 x3 kernel: [68730.292000] pcieport-driver 0000:00:1c.2: resumingMay 6 11:41:14 x3 kernel: [68730.292000] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 6 11:41:14 x3 kernel: [68730.292000] pcieport-driver 0000:00:1c.3: resumingMay 6 11:41:14 x3 kernel: [68730.292000] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 6 11:41:14 x3 kernel: [68730.292000] uhci_hcd 0000:00:1d.0: resumingMay 6 11:41:14 x3 kernel: [68730.292000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 11:41:14 x3 kernel: [68730.292000] PCI: Setting latency timer of device 0000:00:1d.0 to 64May 6 11:41:14 x3 kernel: [68730.292000] usb usb1: root hub lost power or was resetMay 6 11:41:14 x3 kernel: [68730.292000] uhci_hcd 0000:00:1d.1: resumingMay 6 11:41:14 x3 kernel: [68730.292000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21May 6 11:41:14 x3 kernel: [68730.292000] PCI: Setting latency timer of device 0000:00:1d.1 to 64May 6 11:41:14 x3 kernel: [68730.292000] usb usb2: root hub lost power or was resetMay 6 11:41:14 x3 kernel: [68730.292000] uhci_hcd 0000:00:1d.2: resumingMay 6 11:41:14 x3 kernel: [68730.292000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22May 6 11:41:14 x3 kernel: [68730.292000] PCI: Setting latency timer of device 0000:00:1d.2 to 64May 6 11:41:14 x3 kernel: [68730.292000] usb usb3: root hub lost power or was resetMay 6 11:41:14 x3 kernel: [68730.292000] uhci_hcd 0000:00:1d.3: resumingMay 6 11:41:14 x3 kernel: [68730.292000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23May 6 11:41:14 x3 kernel: [68730.292000] PCI: Setting latency timer of device 0000:00:1d.3 to 64May 6 11:41:14 x3 kernel: [68730.292000] usb usb4: root hub lost power or was resetMay 6 11:41:14 x3 kernel: [68730.292000] ehci_hcd 0000:00:1d.7: resumingMay 6 11:41:14 x3 kernel: [68730.308000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23May 6 11:41:14 x3 kernel: [68730.308000] PCI: Setting latency timer of device 0000:00:1d.7 to 64May 6 11:41:14 x3 kernel: [68730.308000] usb usb5: root hub lost power or was resetMay 6 11:41:14 x3 kernel: [68730.312000] ehci_hcd 0000:00:1d.7: debug port 1May 6 11:41:14 x3 kernel: [68730.312000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7May 6 11:41:14 x3 kernel: [68730.312000] pci 0000:00:1e.0: resumingMay 6 11:41:14 x3 kernel: [68730.312000] PCI: Setting latency timer of device 0000:00:1e.0 to 64May 6 11:41:14 x3 kernel: [68730.312000] pci 0000:00:1f.0: resumingMay 6 11:41:14 x3 kernel: [68730.312000] ata_piix 0000:00:1f.1: resumingMay 6 11:41:14 x3 kernel: [68730.312000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880001, writing 2880005)May 6 11:41:14 x3 kernel: [68730.312000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16May 6 11:41:14 x3 kernel: [68730.312000] PCI: Setting latency timer of device 0000:00:1f.1 to 64May 6 11:41:14 x3 kernel: [68730.316000] ata6: ACPI set timing mode failed.May 6 11:41:14 x3 kernel: [68730.316000] ata6: port disabled. ignoring.May 6 11:41:14 x3 kernel: [68730.316000] ahci 0000:00:1f.2: resumingMay 6 11:41:14 x3 kernel: [68730.316000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)May 6 11:41:14 x3 kernel: [68730.316000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16May 6 11:41:14 x3 kernel: [68730.316000] PCI: Setting latency timer of device 0000:00:1f.2 to 64May 6 11:41:14 x3 kernel: [68730.316000] pci 0000:00:1f.3: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci 0000:01:00.0: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci 0000:02:00.0: resumingMay 6 11:41:14 x3 kernel: [68730.316000] PM: Writing back config space on device 0000:02:00.0 at offset f (was 10b, writing 100)May 6 11:41:14 x3 kernel: [68730.316000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100103, writing 100003)May 6 11:41:14 x3 kernel: [68730.316000] pci 0000:03:00.0: resumingMay 6 11:41:14 x3 kernel: [68730.316000] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100102)May 6 11:41:14 x3 kernel: [68730.316000] yenta_cardbus 0000:15:00.0: resumingMay 6 11:41:14 x3 kernel: [68730.316000] PM: Writing back config space on device 0000:15:00.0 at offset f (was 3c0010b, writing 5c0010b)May 6 11:41:14 x3 kernel: [68730.316000] PM: Writing back config space on device 0000:15:00.0 at offset 3 (was 2a808, writing 2a820)May 6 11:41:14 x3 kernel: [68730.316000] system 00:00: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pnp 00:01: resumingMay 6 11:41:14 x3 kernel: [68730.316000] system 00:02: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pnp 00:03: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pnp 00:04: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pnp 00:05: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pnp 00:06: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pnp 00:07: resumingMay 6 11:41:14 x3 kernel: [68730.316000] i8042 kbd 00:08: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pnp: Device 00:08 does not support activation.May 6 11:41:14 x3 kernel: [68730.316000] i8042 aux 00:09: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pnp: Device 00:09 does not support activation.May 6 11:41:14 x3 kernel: [68730.316000] pnp 00:0a: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pnp 00:0b: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pcspkr pcspkr: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci_express 0000:00:01.0:pcie00: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci_express 0000:00:1c.0:pcie00: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci_express 0000:00:1c.0:pcie02: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci_express 0000:00:1c.1:pcie00: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci_express 0000:00:1c.1:pcie02: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci_express 0000:00:1c.2:pcie00: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci_express 0000:00:1c.2:pcie02: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci_express 0000:00:1c.3:pcie00: resumingMay 6 11:41:14 x3 kernel: [68730.316000] pci_express 0000:00:1c.3:pcie02: resumingMay 6 11:41:14 x3 kernel: [68730.316000] serial8250 serial8250: resumingMay 6 11:41:14 x3 kernel: [68730.316000] i8042 i8042: resumingMay 6 11:41:14 x3 kernel: [68730.320000] atkbd serio0: resumingMay 6 11:41:14 x3 kernel: [68730.324000] platform eisa.0: resumingMay 6 11:41:14 x3 kernel: [68730.324000] psmouse serio1: resumingMay 6 11:41:14 x3 kernel: [68730.628000] ata2: SATA link down (SStatus 0 SControl 0)May 6 11:41:14 x3 kernel: [68730.628000] ata3: SATA link down (SStatus 0 SControl 0)May 6 11:41:14 x3 kernel: [68730.628000] ata4: SATA link down (SStatus 0 SControl 0)May 6 11:41:14 x3 kernel: [68730.924000] platform vesafb.0: resumingMay 6 11:41:14 x3 kernel: [68730.924000] sd 0:0:0:0: resumingMay 6 11:41:14 x3 kernel: [68730.924000] usb usb1: resumingMay 6 11:41:14 x3 kernel: [68730.964000] usb usb2: resumingMay 6 11:41:14 x3 kernel: [68731.004000] usb usb3: resumingMay 6 11:41:14 x3 kernel: [68731.044000] usb usb4: resumingMay 6 11:41:14 x3 kernel: [68731.084000] usb usb5: resumingMay 6 11:41:14 x3 kernel: [68731.104000] hub 5-0:1.0: resumingMay 6 11:41:14 x3 kernel: [68731.104000] sr 4:0:0:0: resumingMay 6 11:41:14 x3 kernel: [68731.104000] iTCO_wdt iTCO_wdt: resumingMay 6 11:41:14 x3 kernel: [68731.104000] psmouse serio2: resumingMay 6 11:41:14 x3 kernel: [68731.808000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)May 6 11:41:14 x3 kernel: [68731.808000] ata5.00: configured for UDMA/33May 6 11:41:14 x3 kernel: [68731.808000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 6 11:41:14 x3 kernel: [68731.808000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 6 11:41:14 x3 kernel: [68731.808000] ata1.00: configured for UDMA/100May 6 11:41:14 x3 kernel: [68731.808000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 6 11:41:14 x3 kernel: [68731.812000] sda: Write Protect is offMay 6 11:41:14 x3 kernel: [68731.812000] sda: Mode Sense: 00 3a 00 00May 6 11:41:14 x3 kernel: [68731.816000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 6 11:41:14 x3 kernel: [68734.016000] platform dock.0: resumingMay 6 11:41:14 x3 kernel: [68734.016000] platform bluetooth: resumingMay 6 11:41:14 x3 kernel: [68734.016000] usbdev4.4_ep00: PM: resume from 0, parent 4-2 still 2May 6 11:41:14 x3 kernel: [68734.016000] usbdev4.4_ep81: PM: resume from 0, parent 4-2:1.0 still 2May 6 11:41:14 x3 kernel: [68734.016000] usbdev4.4_ep02: PM: resume from 0, parent 4-2:1.0 still 2May 6 11:41:14 x3 kernel: [68734.016000] usbdev4.4_ep83: PM: resume from 0, parent 4-2:1.0 still 2May 6 11:41:14 x3 kernel: [68734.016000] usb 5-1: resumingMay 6 11:41:14 x3 kernel: [68734.016000] usbdev5.6_ep00: PM: resume from 0, parent 5-1 still 1May 6 11:41:14 x3 kernel: [68734.016000] usb-storage 5-1:1.0: PM: resume from 1, parent 5-1 still 1May 6 11:41:14 x3 kernel: [68734.016000] usb-storage 5-1:1.0: resumingMay 6 11:41:14 x3 kernel: [68734.016000] host7: PM: resume from 0, parent 5-1:1.0 still 1May 6 11:41:14 x3 kernel: [68734.016000] usbdev5.6_ep81: PM: resume from 0, parent 5-1:1.0 still 1May 6 11:41:14 x3 kernel: [68734.016000] usbdev5.6_ep02: PM: resume from 0, parent 5-1:1.0 still 1May 6 11:41:14 x3 kernel: [68734.016000] sd 7:0:0:0: resumingMay 6 11:41:14 x3 kernel: [68734.020000] Restarting tasks ... <6>usb 4-2: USB disconnect, address 4May 6 11:41:14 x3 kernel: [68734.104000] sdb : READ CAPACITY failed.May 6 11:41:14 x3 kernel: [68734.104000] sdb : status=0, message=00, host=7, driver=00 May 6 11:41:14 x3 kernel: [68734.104000] sdb : sense not available. May 6 11:41:14 x3 kernel: [68734.104000] done.May 6 11:41:14 x3 kernel: [68734.104000] Enabling non-boot CPUs ...May 6 11:41:14 x3 kernel: [68734.104000] sdb: Write Protect is offMay 6 11:41:14 x3 kernel: [68734.104000] sdb: Mode Sense: 00 00 00 00May 6 11:41:14 x3 kernel: [68734.104000] sdb: assuming drive cache: write throughMay 6 11:41:14 x3 kernel: [68734.124000] SMP alternatives: switching to SMP codeMay 6 11:41:14 x3 kernel: [68734.124000] Booting processor 1/1 eip 3000May 6 11:41:14 x3 kernel: [68734.136000] Initializing CPU#1May 6 11:41:14 x3 kernel: [68734.216000] Calibrating delay using timer specific routine.. 3990.19 BogoMIPS (lpj=7980382)May 6 11:41:14 x3 kernel: [68734.216000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 6 11:41:14 x3 kernel: [68734.216000] monitor/mwait feature present.May 6 11:41:14 x3 kernel: [68734.216000] CPU: L1 I cache: 32K, L1 D cache: 32KMay 6 11:41:14 x3 kernel: [68734.216000] CPU: L2 cache: 2048KMay 6 11:41:14 x3 kernel: [68734.216000] CPU: Physical Processor ID: 0May 6 11:41:14 x3 kernel: [68734.216000] CPU: Processor Core ID: 1May 6 11:41:14 x3 kernel: [68734.216000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 6 11:41:14 x3 kernel: [68734.216000] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 6 11:41:14 x3 kernel: [68734.216000] usb 5-1: USB disconnect, address 6May 6 11:41:14 x3 kernel: [68734.220000] scsi 7:0:0:0: rejecting I/O to dead deviceMay 6 11:41:14 x3 kernel: [68734.220000] sdb : READ CAPACITY failed.May 6 11:41:14 x3 kernel: [68734.220000] sdb : status=0, message=00, host=1, driver=00 May 6 11:41:14 x3 kernel: [68734.220000] sdb : sense not available. May 6 11:41:14 x3 kernel: [68734.220000] scsi 7:0:0:0: rejecting I/O to dead deviceMay 6 11:41:14 x3 kernel: [68734.220000] sdb: Write Protect is offMay 6 11:41:14 x3 kernel: [68734.220000] sdb: Mode Sense: 00 00 00 00May 6 11:41:14 x3 kernel: [68734.220000] sdb: assuming drive cache: write throughMay 6 11:41:14 x3 kernel: [68734.224000] CPU1 is upMay 6 11:41:15 x3 kernel: [68734.856000] usb 4-2: new full speed USB device using uhci_hcd and address 5May 6 11:41:15 x3 kernel: [68735.032000] usb 4-2: configuration #1 chosen from 1 choiceMay 6 11:41:18 x3 kernel: [68737.948000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPIMay 6 11:41:18 x3 kernel: [68737.948000] Copyright (c) 1999-2006 Intel Corporation.May 6 11:41:18 x3 kernel: [68737.948000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 11:41:18 x3 kernel: [68737.948000] PCI: Setting latency timer of device 0000:02:00.0 to 64May 6 11:41:18 x3 kernel: [68738.008000] e1000: 0000:02:00.0: e1000_probe: The EEPROM Checksum Is Not ValidMay 6 11:41:18 x3 kernel: [68738.028000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 6 11:41:18 x3 kernel: [68738.028000] e1000: probe of 0000:02:00.0 failed with error -5May 6 11:41:18 x3 kernel: [68738.076000] ieee80211_crypt: registered algorithm 'NULL'May 6 11:41:18 x3 kernel: [68738.080000] ieee80211: 802.11 data/management/control stack, git-1.1.13May 6 11:41:18 x3 kernel: [68738.080000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>May 6 11:41:18 x3 kernel: [68738.328000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpMay 6 11:41:18 x3 kernel: [68738.328000] ipw3945: Copyright(c) 2003-2006 Intel CorporationMay 6 11:41:18 x3 kernel: [68738.328000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21May 6 11:41:18 x3 kernel: [68738.328000] PCI: Setting latency timer of device 0000:03:00.0 to 64May 6 11:41:18 x3 kernel: [68738.328000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionMay 6 10:40:32 x3 kernel: [68740.288000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)May 6 10:40:32 x3 kernel: [68740.700000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 6 10:40:33 x3 kernel: [68741.316000] input: Power Button (FF) as /class/input/input15May 6 10:40:33 x3 kernel: [68741.316000] ACPI: Power Button (FF) [PWRF]May 6 10:40:33 x3 kernel: [68741.316000] input: Lid Switch as /class/input/input16May 6 10:40:33 x3 kernel: [68741.316000] ACPI: Lid Switch [LID]May 6 10:40:33 x3 kernel: [68741.316000] input: Sleep Button (CM) as /class/input/input17May 6 10:40:33 x3 kernel: [68741.316000] ACPI: Sleep Button (CM) [SLPB]May 6 10:40:33 x3 kernel: [68741.524000] ACPI: Thermal Zone [THM0] (56 C)May 6 10:40:33 x3 kernel: [68741.528000] ACPI: Thermal Zone [THM1] (61 C)May 6 10:40:33 x3 kernel: [68741.664000] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07May 6 10:40:33 x3 kernel: [68741.664000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13May 6 10:40:33 x3 kernel: [68741.664000] ibm_acpi: http://ibm-acpi.sf.net/May 6 10:40:33 x3 kernel: [68741.816000] ACPI: AC Adapter [AC] (on-line)May 6 10:40:33 x3 kernel: [68741.988000] ACPI: Battery Slot [BAT0] (battery present)May 6 10:51:56 x3 kernel: Inspecting /boot/System.map-2.6.20-15-genericMay 6 10:51:57 x3 kernel: Loaded 24975 symbols from /boot/System.map-2.6.20-15-generic.May 6 10:51:57 x3 kernel: Symbols match kernel version 2.6.20.May 6 10:51:57 x3 kernel: No module symbols loaded - kernel modules not enabled. May 6 10:51:57 x3 kernel: [ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-provided physical RAM map:May 6 10:51:57 x3 kernel: [ 0.000000] sanitize startMay 6 10:51:57 x3 kernel: [ 0.000000] sanitize endMay 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() type is E820_RAMMay 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fdd0000 end: 000000001fed0000 type: 1May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() type is E820_RAMMay 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001fed0000 size: 000000000000f000 end: 000000001fedf000 type: 3May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001fedf000 size: 0000000000021000 end: 000000001ff00000 type: 4May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: 00000000f4000000 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fed0000 (usable)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 000000001fed0000 - 000000001fedf000 (ACPI data)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 000000001fedf000 - 000000001ff00000 (ACPI NVS)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)May 6 10:51:57 x3 kernel: [ 0.000000] 0MB HIGHMEM available.May 6 10:51:57 x3 kernel: [ 0.000000] 510MB LOWMEM available.May 6 10:51:57 x3 kernel: [ 0.000000] found SMP MP-table at 000f6810May 6 10:51:57 x3 kernel: [ 0.000000] Entering add_active_range(0, 0, 130768) 0 entries of 256 usedMay 6 10:51:57 x3 kernel: [ 0.000000] Zone PFN ranges:May 6 10:51:57 x3 kernel: [ 0.000000] DMA 0 -> 4096May 6 10:51:57 x3 kernel: [ 0.000000] Normal 4096 -> 130768May 6 10:51:57 x3 kernel: [ 0.000000] HighMem 130768 -> 130768May 6 10:51:57 x3 kernel: [ 0.000000] early_node_map[1] active PFN rangesMay 6 10:51:57 x3 kernel: [ 0.000000] 0: 0 -> 130768May 6 10:51:57 x3 kernel: [ 0.000000] On node 0 totalpages: 130768May 6 10:51:57 x3 kernel: [ 0.000000] DMA zone: 32 pages used for memmapMay 6 10:51:57 x3 kernel: [ 0.000000] DMA zone: 0 pages reservedMay 6 10:51:57 x3 kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0May 6 10:51:57 x3 kernel: [ 0.000000] Normal zone: 989 pages used for memmapMay 6 10:51:57 x3 kernel: [ 0.000000] Normal zone: 125683 pages, LIFO batch:31May 6 10:51:57 x3 kernel: [ 0.000000] HighMem zone: 0 pages used for memmapMay 6 10:51:57 x3 kernel: [ 0.000000] DMI present.May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: RSDP (v002 LENOVO ) @ 0x000f67d0May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: XSDT (v001 LENOVO TP-79 0x00002090 LTP 0x00000000) @ 0x1fed1486May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: FADT (v003 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fed1600May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 MSFT 0x0100000e) @ 0x1fed17b4May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: ECDT (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fededdfMay 6 10:51:57 x3 kernel: [ 0.000000] ACPI: TCPA (v002 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedee31May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: MADT (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedee63May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: MCFG (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedeecbMay 6 10:51:57 x3 kernel: [ 0.000000] ACPI: HPET (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedef07May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: BOOT (v001 LENOVO TP-79 0x00002090 LTP 0x00000001) @ 0x1fedefd8May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef2697May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef28f6May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef299cMay 6 10:51:57 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef2e93May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: DSDT (v001 LENOVO TP-79 0x00002090 MSFT 0x0100000e) @ 0x00000000May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)May 6 10:51:57 x3 kernel: [ 0.000000] Processor #0 6:14 APIC version 20May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)May 6 10:51:57 x3 kernel: [ 0.000000] Processor #1 6:14 APIC version 20May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])May 6 10:51:57 x3 kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: IRQ0 used by override.May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: IRQ2 used by override.May 6 10:51:57 x3 kernel: [ 0.000000] ACPI: IRQ9 used by override.May 6 10:51:57 x3 kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsMay 6 10:51:57 x3 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000May 6 10:51:57 x3 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationMay 6 10:51:57 x3 kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)May 6 10:51:57 x3 kernel: [ 0.000000] Detected 1995.226 MHz processor.May 6 10:51:57 x3 kernel: [ 22.283443] Built 1 zonelists. Total pages: 129747May 6 10:51:57 x3 kernel: [ 22.283446] Kernel command line: root=UUID=749d2629-36cd-4da7-b622-21add63394e3 ro quiet splashMay 6 10:51:57 x3 kernel: [ 22.283582] mapped APIC to ffffd000 (fee00000)May 6 10:51:57 x3 kernel: [ 22.283584] mapped IOAPIC to ffffc000 (fec00000)May 6 10:51:57 x3 kernel: [ 22.283587] Enabling fast FPU save and restore... done.May 6 10:51:57 x3 kernel: [ 22.283589] Enabling unmasked SIMD FPU exception support... done.May 6 10:51:57 x3 kernel: [ 22.283596] Initializing CPU#0May 6 10:51:57 x3 kernel: [ 22.283666] PID hash table entries: 2048 (order: 11, 8192 bytes)May 6 10:51:57 x3 kernel: [ 22.286101] Console: colour VGA+ 80x25May 6 10:51:57 x3 kernel: [ 22.286238] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)May 6 10:51:57 x3 kernel: [ 22.286394] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)May 6 10:51:57 x3 kernel: [ 22.296550] Memory: 507328k/523072k available (1992k kernel code, 15216k reserved, 893k data, 328k init, 0k highmem)May 6 10:51:57 x3 kernel: [ 22.296559] virtual kernel memory layout:May 6 10:51:57 x3 kernel: [ 22.296560] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)May 6 10:51:57 x3 kernel: [ 22.296561] pkmap : 0xff800000 - 0xffc00000 (4096 kB)May 6 10:51:57 x3 kernel: [ 22.296562] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)May 6 10:51:57 x3 kernel: [ 22.296563] lowmem : 0xc0000000 - 0xdfed0000 ( 510 MB)May 6 10:51:57 x3 kernel: [ 22.296564] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)May 6 10:51:57 x3 kernel: [ 22.296565] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)May 6 10:51:57 x3 kernel: [ 22.296566] .text : 0xc0100000 - 0xc02f2264 (1992 kB)May 6 10:51:57 x3 kernel: [ 22.296569] Checking if this processor honours the WP bit even in supervisor mode... Ok.May 6 10:51:57 x3 kernel: [ 22.296720] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0May 6 10:51:57 x3 kernel: [ 22.296724] hpet0: 3 64-bit timers, 14318180 HzMay 6 10:51:57 x3 kernel: [ 22.297729] Using HPET for base-timerMay 6 10:51:57 x3 kernel: [ 22.376679] Calibrating delay using timer specific routine.. 3994.36 BogoMIPS (lpj=7988725)May 6 10:51:57 x3 kernel: [ 22.376712] Security Framework v1.0.0 initializedMay 6 10:51:57 x3 kernel: [ 22.376718] SELinux: Disabled at boot.May 6 10:51:57 x3 kernel: [ 22.376731] Mount-cache hash table entries: 512May 6 10:51:57 x3 kernel: [ 22.376840] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 6 10:51:57 x3 kernel: [ 22.376848] monitor/mwait feature present.May 6 10:51:57 x3 kernel: [ 22.376849] using mwait in idle threads.May 6 10:51:57 x3 kernel: [ 22.376853] CPU: L1 I cache: 32K, L1 D cache: 32KMay 6 10:51:57 x3 kernel: [ 22.376855] CPU: L2 cache: 2048KMay 6 10:51:57 x3 kernel: [ 22.376857] CPU: Physical Processor ID: 0May 6 10:51:57 x3 kernel: [ 22.376859] CPU: Processor Core ID: 0May 6 10:51:57 x3 kernel: [ 22.376861] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 6 10:51:57 x3 kernel: [ 22.376868] Compat vDSO mapped to ffffe000.May 6 10:51:57 x3 kernel: [ 22.376871] Remapping vsyscall page to ffffe000May 6 10:51:57 x3 kernel: [ 22.376881] Checking 'hlt' instruction... OK.May 6 10:51:57 x3 kernel: [ 22.392754] SMP alternatives: switching to UP codeMay 6 10:51:57 x3 kernel: [ 22.393036] Early unpacking initramfs... doneMay 6 10:51:57 x3 kernel: [ 22.677923] ACPI: Core revision 20060707May 6 10:51:57 x3 kernel: [ 22.678122] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.May 6 10:51:57 x3 kernel: [ 22.705076] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 6 10:51:57 x3 kernel: [ 22.705094] SMP alternatives: switching to SMP codeMay 6 10:51:57 x3 kernel: [ 22.705198] Booting processor 1/1 eip 3000May 6 10:51:57 x3 kernel: [ 22.715879] Initializing CPU#1May 6 10:51:57 x3 kernel: [ 22.796733] Calibrating delay using timer specific routine.. 3990.13 BogoMIPS (lpj=7980262)May 6 10:51:57 x3 kernel: [ 22.796739] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 6 10:51:57 x3 kernel: [ 22.796743] monitor/mwait feature present.May 6 10:51:57 x3 kernel: [ 22.796746] CPU: L1 I cache: 32K, L1 D cache: 32KMay 6 10:51:57 x3 kernel: [ 22.796748] CPU: L2 cache: 2048KMay 6 10:51:57 x3 kernel: [ 22.796750] CPU: Physical Processor ID: 0May 6 10:51:57 x3 kernel: [ 22.796751] CPU: Processor Core ID: 1May 6 10:51:57 x3 kernel: [ 22.796753] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 6 10:51:57 x3 kernel: [ 22.796932] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 6 10:51:57 x3 kernel: [ 22.796954] Total of 2 processors activated (7984.49 BogoMIPS).May 6 10:51:57 x3 kernel: [ 22.797148] ENABLING IO-APIC IRQsMay 6 10:51:57 x3 kernel: [ 22.797348] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1May 6 10:51:57 x3 kernel: [ 22.944368] checking TSC synchronization across 2 CPUs: May 6 10:51:57 x3 kernel: [ 0.000001] CPU#0 had -142 usecs TSC skew, fixed it up.May 6 10:51:57 x3 kernel: [ 0.000003] CPU#1 had 142 usecs TSC skew, fixed it up.May 6 10:51:57 x3 kernel: [ 0.003998] Brought up 2 CPUsMay 6 10:51:57 x3 kernel: [ 0.132340] migration_cost=65May 6 10:51:57 x3 kernel: [ 0.132585] Booting paravirtualized kernel on bare hardwareMay 6 10:51:57 x3 kernel: [ 0.132679] Time: 10:51:26 Date: 04/06/107May 6 10:51:57 x3 kernel: [ 0.132706] NET: Registered protocol family 16May 6 10:51:57 x3 kernel: [ 0.132782] EISA bus registeredMay 6 10:51:57 x3 kernel: [ 0.132788] ACPI: bus type pci registeredMay 6 10:51:57 x3 kernel: [ 0.132914] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24May 6 10:51:57 x3 kernel: [ 0.132916] PCI: Using configuration type 1May 6 10:51:57 x3 kernel: [ 0.132917] Setting up standard PCI resourcesMay 6 10:51:57 x3 kernel: [ 0.144372] ACPI: Interpreter enabledMay 6 10:51:57 x3 kernel: [ 0.144375] ACPI: Using IOAPIC for interrupt routingMay 6 10:51:57 x3 kernel: [ 0.145123] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)May 6 10:51:57 x3 kernel: [ 0.145662] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)May 6 10:51:57 x3 kernel: [ 0.146198] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)May 6 10:51:57 x3 kernel: [ 0.146739] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)May 6 10:51:57 x3 kernel: [ 0.147275] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)May 6 10:51:57 x3 kernel: [ 0.147813] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)May 6 10:51:57 x3 kernel: [ 0.148372] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)May 6 10:51:57 x3 kernel: [ 0.148907] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)May 6 10:51:57 x3 kernel: [ 0.149250] ACPI: PCI Root Bridge [PCI0] (0000:00)May 6 10:51:57 x3 kernel: [ 0.149254] PCI: Probing PCI hardware (bus 00)May 6 10:51:57 x3 kernel: [ 0.151001] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCOMay 6 10:51:57 x3 kernel: [ 0.151005] PCI quirk: region 1180-11bf claimed by ICH6 GPIOMay 6 10:51:57 x3 kernel: [ 0.151328] Boot video device is 0000:01:00.0May 6 10:51:57 x3 kernel: [ 0.152295] PCI: Transparent bridge - 0000:00:1e.0May 6 10:51:57 x3 kernel: [ 0.152443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]May 6 10:51:57 x3 kernel: [ 0.157226] ACPI: Power Resource [PUBS] (on)May 6 10:51:57 x3 kernel: [ 0.158291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]May 6 10:51:57 x3 kernel: [ 0.158591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]May 6 10:51:57 x3 kernel: [ 0.158758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]May 6 10:51:57 x3 kernel: [ 0.158924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]May 6 10:51:57 x3 kernel: [ 0.159123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]May 6 10:51:57 x3 kernel: [ 0.159322] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]May 6 10:51:57 x3 kernel: [ 0.161210] Linux Plug and Play Support v0.97 (c) Adam BelayMay 6 10:51:57 x3 kernel: [ 0.161220] pnp: PnP ACPI initMay 6 10:51:57 x3 kernel: [ 0.165879] pnp: PnP ACPI: found 12 devicesMay 6 10:51:57 x3 kernel: [ 0.165882] PnPBIOS: Disabled by ACPI PNPMay 6 10:51:57 x3 kernel: [ 0.165921] PCI: Using ACPI for IRQ routingMay 6 10:51:57 x3 kernel: [ 0.165923] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportMay 6 10:51:57 x3 kernel: [ 0.220228] NET: Registered protocol family 8May 6 10:51:57 x3 kernel: [ 0.220230] NET: Registered protocol family 20May 6 10:51:57 x3 kernel: [ 0.221159] PCI: Bridge: 0000:00:01.0May 6 10:51:57 x3 kernel: [ 0.221162] IO window: 2000-2fffMay 6 10:51:57 x3 kernel: [ 0.221166] MEM window: ee100000-ee1fffffMay 6 10:51:57 x3 kernel: [ 0.221169] PREFETCH window: d8000000-dfffffffMay 6 10:51:57 x3 kernel: [ 0.221172] PCI: Bridge: 0000:00:1c.0May 6 10:51:57 x3 kernel: [ 0.221175] IO window: 3000-3fffMay 6 10:51:57 x3 kernel: [ 0.221180] MEM window: ee000000-ee0fffffMay 6 10:51:57 x3 kernel: [ 0.221184] PREFETCH window: disabled.May 6 10:51:57 x3 kernel: [ 0.221190] PCI: Bridge: 0000:00:1c.1May 6 10:51:57 x3 kernel: [ 0.221193] IO window: 4000-5fffMay 6 10:51:57 x3 kernel: [ 0.221198] MEM window: ec000000-edffffffMay 6 10:51:57 x3 kernel: [ 0.221203] PREFETCH window: e4000000-e40fffffMay 6 10:51:57 x3 kernel: [ 0.221208] PCI: Bridge: 0000:00:1c.2May 6 10:51:57 x3 kernel: [ 0.221211] IO window: 6000-7fffMay 6 10:51:57 x3 kernel: [ 0.221217] MEM window: e8000000-e9ffffffMay 6 10:51:57 x3 kernel: [ 0.221221] PREFETCH window: e4100000-e41fffffMay 6 10:51:57 x3 kernel: [ 0.221227] PCI: Bridge: 0000:00:1c.3May 6 10:51:57 x3 kernel: [ 0.221230] IO window: 8000-9fffMay 6 10:51:57 x3 kernel: [ 0.221235] MEM window: ea000000-ebffffffMay 6 10:51:57 x3 kernel: [ 0.221240] PREFETCH window: e4200000-e42fffffMay 6 10:51:57 x3 kernel: [ 0.221247] PCI: Bus 22, cardbus bridge: 0000:15:00.0May 6 10:51:57 x3 kernel: [ 0.221249] IO window: 0000a000-0000a0ffMay 6 10:51:57 x3 kernel: [ 0.221254] IO window: 0000a400-0000a4ffMay 6 10:51:57 x3 kernel: [ 0.221260] PREFETCH window: e0000000-e3ffffffMay 6 10:51:57 x3 kernel: [ 0.221265] MEM window: 30000000-33ffffffMay 6 10:51:57 x3 kernel: [ 0.221270] PCI: Bridge: 0000:00:1e.0May 6 10:51:57 x3 kernel: [ 0.221273] IO window: a000-dfffMay 6 10:51:57 x3 kernel: [ 0.221279] MEM window: e4300000-e7ffffffMay 6 10:51:57 x3 kernel: [ 0.221283] PREFETCH window: e0000000-e3ffffffMay 6 10:51:57 x3 kernel: [ 0.221299] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 10:51:57 x3 kernel: [ 0.221304] PCI: Setting latency timer of device 0000:00:01.0 to 64May 6 10:51:57 x3 kernel: [ 0.221325] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17May 6 10:51:57 x3 kernel: [ 0.221331] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 6 10:51:57 x3 kernel: [ 0.221353] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18May 6 10:51:57 x3 kernel: [ 0.221358] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 6 10:51:57 x3 kernel: [ 0.221380] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19May 6 10:51:57 x3 kernel: [ 0.221385] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 6 10:51:57 x3 kernel: [ 0.221407] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20May 6 10:51:57 x3 kernel: [ 0.221413] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 6 10:51:57 x3 kernel: [ 0.221423] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)May 6 10:51:57 x3 kernel: [ 0.221429] PCI: Setting latency timer of device 0000:00:1e.0 to 64May 6 10:51:57 x3 kernel: [ 0.221446] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 10:51:57 x3 kernel: [ 0.221477] NET: Registered protocol family 2May 6 10:51:57 x3 kernel: [ 0.263891] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)May 6 10:51:57 x3 kernel: [ 0.263957] TCP established hash table entries: 16384 (order: 5, 131072 bytes)May 6 10:51:57 x3 kernel: [ 0.264036] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)May 6 10:51:57 x3 kernel: [ 0.264077] TCP: Hash tables configured (established 16384 bind 8192)May 6 10:51:57 x3 kernel: [ 0.264079] TCP reno registeredMay 6 10:51:57 x3 kernel: [ 0.279934] checking if image is initramfs... it isMay 6 10:51:57 x3 kernel: [ 0.844955] Freeing initrd memory: 6995k freedMay 6 10:51:57 x3 kernel: [ 0.845129] Simple Boot Flag at 0x35 set to 0x1May 6 10:51:57 x3 kernel: [ 0.845545] audit: initializing netlink socket (disabled)May 6 10:51:57 x3 kernel: [ 0.845561] audit(1178448687.556:1): initializedMay 6 10:51:57 x3 kernel: [ 0.845718] VFS: Disk quotas dquot_6.5.1May 6 10:51:57 x3 kernel: [ 0.845736] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)May 6 10:51:57 x3 kernel: [ 0.845781] io scheduler noop registeredMay 6 10:51:57 x3 kernel: [ 0.845784] io scheduler anticipatory registeredMay 6 10:51:57 x3 kernel: [ 0.845786] io scheduler deadline registeredMay 6 10:51:57 x3 kernel: [ 0.845796] io scheduler cfq registered (default)May 6 10:51:57 x3 kernel: [ 0.846026] PCI: Setting latency timer of device 0000:00:01.0 to 64May 6 10:51:57 x3 kernel: [ 0.846058] assign_interrupt_mode Found MSI capabilityMay 6 10:51:57 x3 kernel: [ 0.846060] Allocate Port Service[0000:00:01.0:pcie00]May 6 10:51:57 x3 kernel: [ 0.846137] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 6 10:51:57 x3 kernel: [ 0.846190] assign_interrupt_mode Found MSI capabilityMay 6 10:51:57 x3 kernel: [ 0.846192] Allocate Port Service[0000:00:1c.0:pcie00]May 6 10:51:57 x3 kernel: [ 0.846224] Allocate Port Service[0000:00:1c.0:pcie02]May 6 10:51:57 x3 kernel: [ 0.846333] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 6 10:51:57 x3 kernel: [ 0.846387] assign_interrupt_mode Found MSI capabilityMay 6 10:51:57 x3 kernel: [ 0.846389] Allocate Port Service[0000:00:1c.1:pcie00]May 6 10:51:57 x3 kernel: [ 0.846416] Allocate Port Service[0000:00:1c.1:pcie02]May 6 10:51:57 x3 kernel: [ 0.846525] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 6 10:51:57 x3 kernel: [ 0.846578] assign_interrupt_mode Found MSI capabilityMay 6 10:51:57 x3 kernel: [ 0.846580] Allocate Port Service[0000:00:1c.2:pcie00]May 6 10:51:57 x3 kernel: [ 0.846609] Allocate Port Service[0000:00:1c.2:pcie02]May 6 10:51:57 x3 kernel: [ 0.846720] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 6 10:51:57 x3 kernel: [ 0.846773] assign_interrupt_mode Found MSI capabilityMay 6 10:51:57 x3 kernel: [ 0.846776] Allocate Port Service[0000:00:1c.3:pcie00]May 6 10:51:57 x3 kernel: [ 0.846808] Allocate Port Service[0000:00:1c.3:pcie02]May 6 10:51:57 x3 kernel: [ 0.846967] isapnp: Scanning for PnP cards...May 6 10:51:57 x3 kernel: [ 1.201598] isapnp: No Plug & Play device foundMay 6 10:51:57 x3 kernel: [ 1.221355] Real Time Clock Driver v1.12acMay 6 10:51:57 x3 kernel: [ 1.221407] hpet_resources: 0xfed00000 is busyMay 6 10:51:57 x3 kernel: [ 1.221431] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledMay 6 10:51:57 x3 kernel: [ 1.221637] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550AMay 6 10:51:57 x3 kernel: [ 1.222122] mice: PS/2 mouse device common for all miceMay 6 10:51:57 x3 kernel: [ 1.222602] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeMay 6 10:51:57 x3 kernel: [ 1.222803] input: Macintosh mouse button emulation as /class/input/input0May 6 10:51:57 x3 kernel: [ 1.222832] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2May 6 10:51:57 x3 kernel: [ 1.222835] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxMay 6 10:51:57 x3 kernel: [ 1.223111] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12May 6 10:51:57 x3 kernel: [ 1.232347] serio: i8042 KBD port at 0x60,0x64 irq 1May 6 10:51:57 x3 kernel: [ 1.232351] serio: i8042 AUX port at 0x60,0x64 irq 12May 6 10:51:57 x3 kernel: [ 1.232449] EISA: Probing bus 0 at eisa.0May 6 10:51:57 x3 kernel: [ 1.232457] Cannot allocate resource for EISA slot 1May 6 10:51:57 x3 kernel: [ 1.232460] Cannot allocate resource for EISA slot 2May 6 10:51:57 x3 kernel: [ 1.232462] Cannot allocate resource for EISA slot 3May 6 10:51:57 x3 kernel: [ 1.232465] Cannot allocate resource for EISA slot 4May 6 10:51:57 x3 kernel: [ 1.232467] Cannot allocate resource for EISA slot 5May 6 10:51:57 x3 kernel: [ 1.232469] Cannot allocate resource for EISA slot 6May 6 10:51:57 x3 kernel: [ 1.232471] Cannot allocate resource for EISA slot 7May 6 10:51:57 x3 kernel: [ 1.232473] Cannot allocate resource for EISA slot 8May 6 10:51:57 x3 kernel: [ 1.232474] EISA: Detected 0 cards.May 6 10:51:57 x3 kernel: [ 1.262551] TCP cubic registeredMay 6 10:51:57 x3 kernel: [ 1.262559] NET: Registered protocol family 1May 6 10:51:57 x3 kernel: [ 1.262579] Starting balanced_irqMay 6 10:51:57 x3 kernel: [ 1.262585] Using IPI No-Shortcut modeMay 6 10:51:57 x3 kernel: [ 1.262638] input: AT Translated Set 2 keyboard as /class/input/input1May 6 10:51:57 x3 kernel: [ 1.262711] ACPI: (supports S0 S3 S4 S5)May 6 10:51:57 x3 kernel: [ 1.262756] Magic number: 7:840:880May 6 10:51:57 x3 kernel: [ 1.262821] hash matches device ptyx4May 6 10:51:57 x3 kernel: [ 1.263020] Freeing unused kernel memory: 328k freedMay 6 10:51:57 x3 kernel: [ 1.263304] Time: tsc clocksource has been installed.May 6 10:51:57 x3 kernel: [ 2.439439] Capability LSM initializedMay 6 10:51:57 x3 kernel: [ 2.468593] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]May 6 10:51:57 x3 kernel: [ 2.468930] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]May 6 10:51:57 x3 kernel: [ 2.469762] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])May 6 10:51:57 x3 kernel: [ 2.469766] ACPI: Processor [CPU0] (supports 8 throttling states)May 6 10:51:57 x3 kernel: [ 2.470259] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]May 6 10:51:57 x3 kernel: [ 2.470501] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]May 6 10:51:57 x3 kernel: [ 2.471366] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])May 6 10:51:57 x3 kernel: [ 2.471371] ACPI: Processor [CPU1] (supports 8 throttling states)May 6 10:51:57 x3 kernel: [ 3.000000] ACPI: Thermal Zone [THM0] (56 C)May 6 10:51:57 x3 kernel: [ 3.000000] ACPI: Thermal Zone [THM1] (57 C)May 6 10:51:57 x3 kernel: [ 3.008000] Time: hpet clocksource has been installed.May 6 10:51:57 x3 kernel: [ 3.308000] usbcore: registered new interface driver usbfsMay 6 10:51:57 x3 kernel: [ 3.308000] usbcore: registered new interface driver hubMay 6 10:51:57 x3 kernel: [ 3.308000] usbcore: registered new device driver usbMay 6 10:51:57 x3 kernel: [ 3.308000] USB Universal Host Controller Interface driver v3.0May 6 10:51:57 x3 kernel: [ 3.308000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 10:51:57 x3 kernel: [ 3.308000] PCI: Setting latency timer of device 0000:00:1d.0 to 64May 6 10:51:57 x3 kernel: [ 3.308000] uhci_hcd 0000:00:1d.0: UHCI Host ControllerMay 6 10:51:57 x3 kernel: [ 3.308000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1May 6 10:51:57 x3 kernel: [ 3.308000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800May 6 10:51:57 x3 kernel: [ 3.308000] usb usb1: configuration #1 chosen from 1 choiceMay 6 10:51:57 x3 kernel: [ 3.308000] hub 1-0:1.0: USB hub foundMay 6 10:51:57 x3 kernel: [ 3.308000] hub 1-0:1.0: 2 ports detectedMay 6 10:51:57 x3 kernel: [ 3.328000] SCSI subsystem initializedMay 6 10:51:57 x3 kernel: [ 3.344000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPIMay 6 10:51:57 x3 kernel: [ 3.344000] Copyright (c) 1999-2006 Intel Corporation.May 6 10:51:57 x3 kernel: [ 3.348000] libata version 2.20 loaded.May 6 10:51:57 x3 kernel: [ 3.412000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21May 6 10:51:57 x3 kernel: [ 3.412000] PCI: Setting latency timer of device 0000:00:1d.1 to 64May 6 10:51:57 x3 kernel: [ 3.412000] uhci_hcd 0000:00:1d.1: UHCI Host ControllerMay 6 10:51:57 x3 kernel: [ 3.412000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2May 6 10:51:57 x3 kernel: [ 3.412000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820May 6 10:51:57 x3 kernel: [ 3.412000] usb usb2: configuration #1 chosen from 1 choiceMay 6 10:51:57 x3 kernel: [ 3.412000] hub 2-0:1.0: USB hub foundMay 6 10:51:57 x3 kernel: [ 3.412000] hub 2-0:1.0: 2 ports detectedMay 6 10:51:57 x3 kernel: [ 3.516000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22May 6 10:51:57 x3 kernel: [ 3.516000] PCI: Setting latency timer of device 0000:00:1d.2 to 64May 6 10:51:57 x3 kernel: [ 3.516000] uhci_hcd 0000:00:1d.2: UHCI Host ControllerMay 6 10:51:57 x3 kernel: [ 3.516000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3May 6 10:51:57 x3 kernel: [ 3.516000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840May 6 10:51:57 x3 kernel: [ 3.516000] usb usb3: configuration #1 chosen from 1 choiceMay 6 10:51:57 x3 kernel: [ 3.516000] hub 3-0:1.0: USB hub foundMay 6 10:51:57 x3 kernel: [ 3.516000] hub 3-0:1.0: 2 ports detectedMay 6 10:51:57 x3 kernel: [ 3.620000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23May 6 10:51:57 x3 kernel: [ 3.620000] PCI: Setting latency timer of device 0000:00:1d.3 to 64May 6 10:51:57 x3 kernel: [ 3.620000] uhci_hcd 0000:00:1d.3: UHCI Host ControllerMay 6 10:51:57 x3 kernel: [ 3.620000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4May 6 10:51:57 x3 kernel: [ 3.620000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860May 6 10:51:57 x3 kernel: [ 3.620000] usb usb4: configuration #1 chosen from 1 choiceMay 6 10:51:57 x3 kernel: [ 3.620000] hub 4-0:1.0: USB hub foundMay 6 10:51:57 x3 kernel: [ 3.620000] hub 4-0:1.0: 2 ports detectedMay 6 10:51:57 x3 kernel: [ 3.724000] ahci 0000:00:1f.2: version 2.1May 6 10:51:57 x3 kernel: [ 3.724000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16May 6 10:51:57 x3 kernel: [ 3.964000] usb 4-2: new full speed USB device using uhci_hcd and address 2May 6 10:51:57 x3 kernel: [ 4.140000] usb 4-2: configuration #1 chosen from 1 choiceMay 6 10:51:57 x3 kernel: [ 4.728000] PCI: Setting latency timer of device 0000:00:1f.2 to 64May 6 10:51:57 x3 kernel: [ 4.728000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA modeMay 6 10:51:57 x3 kernel: [ 4.728000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part May 6 10:51:57 x3 kernel: [ 4.728000] ata1: SATA max UDMA/133 cmd 0xe086e500 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 10:51:57 x3 kernel: [ 4.728000] ata2: SATA max UDMA/133 cmd 0xe086e580 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 10:51:57 x3 kernel: [ 4.728000] ata3: SATA max UDMA/133 cmd 0xe086e600 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 10:51:57 x3 kernel: [ 4.728000] ata4: SATA max UDMA/133 cmd 0xe086e680 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 10:51:57 x3 kernel: [ 4.728000] scsi0 : ahciMay 6 10:51:57 x3 kernel: [ 5.212000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)May 6 10:51:57 x3 kernel: [ 5.212000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 6 10:51:57 x3 kernel: [ 5.212000] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100May 6 10:51:57 x3 kernel: [ 5.212000] ata1.00: 156301488 sectors, multi 16: LBA48 May 6 10:51:57 x3 kernel: [ 5.212000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 6 10:51:57 x3 kernel: [ 5.212000] ata1.00: configured for UDMA/100May 6 10:51:57 x3 kernel: [ 5.212000] scsi1 : ahciMay 6 10:51:57 x3 kernel: [ 5.524000] ata2: SATA link down (SStatus 0 SControl 0)May 6 10:51:57 x3 kernel: [ 5.524000] scsi2 : ahciMay 6 10:51:57 x3 kernel: [ 5.836000] ata3: SATA link down (SStatus 0 SControl 0)May 6 10:51:57 x3 kernel: [ 5.836000] scsi3 : ahciMay 6 10:51:57 x3 kernel: [ 6.148000] ata4: SATA link down (SStatus 0 SControl 0)May 6 10:51:57 x3 kernel: [ 6.148000] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5May 6 10:51:57 x3 kernel: [ 6.148000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23May 6 10:51:57 x3 kernel: [ 6.148000] PCI: Setting latency timer of device 0000:00:1d.7 to 64May 6 10:51:57 x3 kernel: [ 6.148000] ehci_hcd 0000:00:1d.7: EHCI Host ControllerMay 6 10:51:57 x3 kernel: [ 6.148000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5May 6 10:51:57 x3 kernel: [ 6.148000] ehci_hcd 0000:00:1d.7: debug port 1May 6 10:51:57 x3 kernel: [ 6.148000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7May 6 10:51:57 x3 kernel: [ 6.148000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee404000May 6 10:51:57 x3 kernel: [ 6.152000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004May 6 10:51:57 x3 kernel: [ 6.152000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 6 10:51:57 x3 kernel: [ 6.152000] sda: Write Protect is offMay 6 10:51:57 x3 kernel: [ 6.152000] sda: Mode Sense: 00 3a 00 00May 6 10:51:57 x3 kernel: [ 6.152000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 6 10:51:57 x3 kernel: [ 6.152000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 6 10:51:57 x3 kernel: [ 6.152000] sda: Write Protect is offMay 6 10:51:57 x3 kernel: [ 6.152000] sda: Mode Sense: 00 3a 00 00May 6 10:51:57 x3 kernel: [ 6.152000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 6 10:51:57 x3 kernel: [ 6.152000] sda:<6>usb usb5: configuration #1 chosen from 1 choiceMay 6 10:51:57 x3 kernel: [ 6.152000] hub 5-0:1.0: USB hub foundMay 6 10:51:57 x3 kernel: [ 6.152000] hub 5-0:1.0: 8 ports detectedMay 6 10:51:57 x3 kernel: [ 6.244000] usb 4-2: USB disconnect, address 2May 6 10:51:57 x3 kernel: [ 6.256000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 10:51:57 x3 kernel: [ 6.256000] PCI: Setting latency timer of device 0000:02:00.0 to 64May 6 10:51:57 x3 kernel: [ 6.316000] e1000: 0000:02:00.0: e1000_probe: The EEPROM Checksum Is Not ValidMay 6 10:51:57 x3 kernel: [ 6.336000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 6 10:51:57 x3 kernel: [ 6.336000] e1000: probe of 0000:02:00.0 failed with error -5May 6 10:51:57 x3 kernel: [ 6.336000] ata_piix 0000:00:1f.1: version 2.10ac1May 6 10:51:57 x3 kernel: [ 6.336000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16May 6 10:51:57 x3 kernel: [ 6.336000] PCI: Setting latency timer of device 0000:00:1f.1 to 64May 6 10:51:57 x3 kernel: [ 6.336000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14May 6 10:51:57 x3 kernel: [ 6.336000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15May 6 10:51:57 x3 kernel: [ 6.336000] scsi4 : ata_piixMay 6 10:51:57 x3 kernel: [ 6.512000] sda1 sda2 sda3 sda4 < sda5 sda6 >May 6 10:51:57 x3 kernel: [ 6.536000] sd 0:0:0:0: Attached scsi disk sdaMay 6 10:51:57 x3 kernel: [ 6.540000] sd 0:0:0:0: Attached scsi generic sg0 type 0May 6 10:51:57 x3 kernel: [ 6.656000] ata5.00: ATAPI, max UDMA/33May 6 10:51:57 x3 kernel: [ 6.820000] ata5.00: configured for UDMA/33May 6 10:51:57 x3 kernel: [ 6.820000] scsi5 : ata_piixMay 6 10:51:57 x3 kernel: [ 6.820000] ata6: port disabled. ignoring.May 6 10:51:57 x3 kernel: [ 6.824000] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5May 6 10:51:57 x3 kernel: [ 6.824000] scsi 4:0:0:0: Attached scsi generic sg1 type 5May 6 10:51:57 x3 kernel: [ 6.840000] Attempting manual resumeMay 6 10:51:57 x3 kernel: [ 6.840000] swsusp: Resume From Partition 8:5May 6 10:51:57 x3 kernel: [ 6.840000] PM: Checking swsusp image.May 6 10:51:57 x3 kernel: [ 6.840000] PM: Resume from disk failed.May 6 10:51:57 x3 kernel: [ 6.844000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayMay 6 10:51:57 x3 kernel: [ 6.844000] Uniform CD-ROM driver Revision: 3.20May 6 10:51:57 x3 kernel: [ 6.844000] sr 4:0:0:0: Attached scsi CD-ROM sr0May 6 10:51:57 x3 kernel: [ 6.852000] ReiserFS: sda3: found reiserfs format "3.6" with standard journalMay 6 10:51:57 x3 kernel: [ 6.852000] ReiserFS: sda3: using ordered data modeMay 6 10:51:57 x3 kernel: [ 6.872000] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30May 6 10:51:57 x3 kernel: [ 6.872000] ReiserFS: sda3: checking transaction log (sda3)May 6 10:51:57 x3 kernel: [ 6.912000] ReiserFS: sda3: Using r5 hash to sort namesMay 6 10:51:57 x3 kernel: [ 6.988000] usb 4-2: new full speed USB device using uhci_hcd and address 3May 6 10:51:57 x3 kernel: [ 7.164000] usb 4-2: configuration #1 chosen from 1 choiceMay 6 10:51:57 x3 kernel: [ 15.480000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5May 6 10:51:57 x3 kernel: [ 15.508000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4May 6 10:51:57 x3 kernel: [ 15.564000] Linux agpgart interface v0.102 (c) Dave JonesMay 6 10:51:57 x3 kernel: [ 15.636000] agpgart: Detected an Intel 945GM Chipset.May 6 10:51:57 x3 kernel: [ 15.652000] agpgart: AGP aperture is 256M @ 0x0May 6 10:51:57 x3 kernel: [ 15.772000] intel_rng: FWH not detectedMay 6 10:51:57 x3 kernel: [ 15.892000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]May 6 10:51:57 x3 kernel: [ 15.892000] Yenta: Using INTVAL to route CSC interrupts to PCIMay 6 10:51:57 x3 kernel: [ 15.892000] Yenta: Routing CardBus interrupts to PCIMay 6 10:51:57 x3 kernel: [ 15.892000] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64May 6 10:51:57 x3 kernel: [ 15.908000] iTCO_vendor_support: vendor-support=0May 6 10:51:57 x3 kernel: [ 15.908000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)May 6 10:51:57 x3 kernel: [ 15.908000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)May 6 10:51:57 x3 kernel: [ 15.908000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)May 6 10:51:57 x3 kernel: [ 15.952000] ieee80211_crypt: registered algorithm 'NULL'May 6 10:51:57 x3 kernel: [ 15.952000] ieee80211: 802.11 data/management/control stack, git-1.1.13May 6 10:51:57 x3 kernel: [ 15.952000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>May 6 10:51:57 x3 kernel: [ 15.976000] input: PC Speaker as /class/input/input2May 6 10:51:57 x3 kernel: [ 16.012000] irda_init()May 6 10:51:57 x3 kernel: [ 16.012000] NET: Registered protocol family 23May 6 10:51:57 x3 kernel: [ 16.080000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpMay 6 10:51:57 x3 kernel: [ 16.080000] ipw3945: Copyright(c) 2003-2006 Intel CorporationMay 6 10:51:57 x3 kernel: [ 16.124000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16May 6 10:51:57 x3 kernel: [ 16.124000] Socket status: 30000007May 6 10:51:57 x3 kernel: [ 16.124000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfffMay 6 10:51:57 x3 kernel: [ 16.124000] cs: IO port probe 0xa000-0xdfff: clean.May 6 10:51:57 x3 kernel: [ 16.124000] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffffMay 6 10:51:57 x3 kernel: [ 16.124000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffffMay 6 10:51:57 x3 kernel: [ 16.128000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21May 6 10:51:57 x3 kernel: [ 16.128000] PCI: Setting latency timer of device 0000:03:00.0 to 64May 6 10:51:57 x3 kernel: [ 16.128000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionMay 6 10:51:57 x3 kernel: [ 16.280000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21May 6 10:51:57 x3 kernel: [ 16.280000] PCI: Setting latency timer of device 0000:00:1b.0 to 64May 6 10:51:57 x3 kernel: [ 16.476000] cs: IO port probe 0x100-0x3af: clean.May 6 10:51:57 x3 kernel: [ 16.480000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7May 6 10:51:57 x3 kernel: [ 16.480000] cs: IO port probe 0x820-0x8ff: clean.May 6 10:51:57 x3 kernel: [ 16.480000] cs: IO port probe 0xc00-0xcf7: clean.May 6 10:51:57 x3 kernel: [ 16.480000] cs: IO port probe 0xa00-0xaff: clean.May 6 10:51:57 x3 kernel: [ 16.576000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000May 6 10:51:57 x3 kernel: [ 16.576000] serio: Synaptics pass-through port at isa0060/serio1/input0May 6 10:51:57 x3 kernel: [ 16.624000] input: SynPS/2 Synaptics TouchPad as /class/input/input3May 6 10:51:57 x3 kernel: [ 16.624000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.May 6 10:51:57 x3 kernel: [ 16.624000] nsc-ircc, chip->initMay 6 10:51:57 x3 kernel: [ 16.624000] nsc-ircc, Found chip at base=0x164eMay 6 10:51:57 x3 kernel: [ 16.624000] nsc-ircc, driver loaded (Dag Brattli)May 6 10:51:57 x3 kernel: [ 16.624000] nsc_ircc_open(), can't get iobase of 0x2f8May 6 10:51:57 x3 kernel: [ 16.624000] nsc-ircc, Found chip at base=0x164eMay 6 10:51:57 x3 kernel: [ 16.624000] nsc-ircc, driver loaded (Dag Brattli)May 6 10:51:57 x3 kernel: [ 16.624000] nsc_ircc_open(), can't get iobase of 0x2f8May 6 10:51:57 x3 kernel: [ 16.628000] pnp: Device 00:0a disabled.May 6 10:51:57 x3 kernel: [ 16.828000] fuse init (API version 7.8)May 6 10:51:57 x3 kernel: [ 16.864000] lp: driver loaded but no devices foundMay 6 10:51:57 x3 kernel: [ 16.884000] Adding 1028120k swap on /dev/disk/by-uuid/13472f49-9629-45e1-a0b8-4ff0db443906. Priority:-1 extents:1 across:1028120kMay 6 10:51:57 x3 kernel: [ 17.984000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)May 6 10:51:57 x3 kernel: [ 19.300000] NET: Registered protocol family 17May 6 10:51:57 x3 kernel: [ 22.248000] IBM TrackPoint firmware: 0x0e, buttons: 3/3May 6 10:51:57 x3 kernel: [ 22.536000] input: TPPS/2 IBM TrackPoint as /class/input/input4May 6 10:51:57 x3 kernel: [ 25.300000] NTFS driver 2.1.28 [Flags: R/O MODULE].May 6 10:51:57 x3 kernel: [ 25.364000] NTFS volume version 3.1.May 6 10:51:57 x3 kernel: [ 30.792000] Using specific hotkey driverMay 6 10:51:57 x3 kernel: [ 30.868000] ACPI: AC Adapter [AC] (on-line)May 6 10:51:57 x3 kernel: [ 30.876000] ACPI: ACPI Dock Station Driver May 6 10:51:57 x3 kernel: [ 30.952000] input: Power Button (FF) as /class/input/input5May 6 10:51:57 x3 kernel: [ 30.952000] ACPI: Power Button (FF) [PWRF]May 6 10:51:57 x3 kernel: [ 30.952000] input: Lid Switch as /class/input/input6May 6 10:51:57 x3 kernel: [ 30.952000] ACPI: Lid Switch [LID]May 6 10:51:57 x3 kernel: [ 30.952000] input: Sleep Button (CM) as /class/input/input7May 6 10:51:57 x3 kernel: [ 30.952000] ACPI: Sleep Button (CM) [SLPB]May 6 10:51:57 x3 kernel: [ 31.020000] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07May 6 10:51:57 x3 kernel: [ 31.020000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13May 6 10:51:57 x3 kernel: [ 31.020000] ibm_acpi: http://ibm-acpi.sf.net/May 6 10:51:57 x3 kernel: [ 31.048000] ACPI: Battery Slot [BAT0] (battery present)May 6 10:51:57 x3 kernel: [ 31.056000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)May 6 10:51:57 x3 kernel: [ 31.056000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)May 6 10:51:57 x3 kernel: [ 31.084000] pcc_acpi: loading...May 6 10:51:58 x3 kernel: [ 33.108000] ttyS1: LSR safety check engaged!May 6 10:51:59 x3 kernel: [ 33.964000] ppdev: user-space parallel port driverMay 6 10:51:59 x3 kernel: [ 34.492000] apm: BIOS not found.May 6 10:52:00 x3 kernel: [ 34.768000] Non-volatile memory driver v1.2May 6 10:52:00 x3 kernel: [ 34.780000] input: /usr/sbin/thinkpad-keys as /class/input/input8May 6 10:52:00 x3 kernel: [ 35.188000] Bluetooth: Core ver 2.11May 6 10:52:00 x3 kernel: [ 35.188000] NET: Registered protocol family 31May 6 10:52:00 x3 kernel: [ 35.188000] Bluetooth: HCI device and connection manager initializedMay 6 10:52:00 x3 kernel: [ 35.188000] Bluetooth: HCI socket layer initializedMay 6 10:52:00 x3 kernel: [ 35.216000] Bluetooth: L2CAP ver 2.8May 6 10:52:00 x3 kernel: [ 35.216000] Bluetooth: L2CAP socket layer initializedMay 6 10:52:00 x3 kernel: [ 35.412000] Bluetooth: RFCOMM socket layer initializedMay 6 10:52:00 x3 kernel: [ 35.412000] Bluetooth: RFCOMM TTY layer initializedMay 6 10:52:00 x3 kernel: [ 35.412000] Bluetooth: RFCOMM ver 1.8May 6 10:52:52 x3 kernel: [ 87.360000] NET: Registered protocol family 10May 6 10:52:52 x3 kernel: [ 87.360000] lo: Disabled Privacy ExtensionsMay 6 10:52:52 x3 kernel: [ 87.360000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 6 10:56:46 x3 kernel: [ 321.300000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes readyMay 6 11:57:54 x3 kernel: [ 339.576000] eth1: no IPv6 routers presentMay 6 12:03:24 x3 kernel: [ 669.408000] usb 5-2: new high speed USB device using ehci_hcd and address 3May 6 12:03:24 x3 kernel: [ 669.540000] usb 5-2: configuration #1 chosen from 1 choiceMay 6 12:03:25 x3 kernel: [ 669.888000] usbcore: registered new interface driver libusualMay 6 12:03:25 x3 kernel: [ 669.904000] Initializing USB Mass Storage driver...May 6 12:03:25 x3 kernel: [ 669.904000] scsi6 : SCSI emulation for USB Mass Storage devicesMay 6 12:03:25 x3 kernel: [ 669.904000] usbcore: registered new interface driver usb-storageMay 6 12:03:25 x3 kernel: [ 669.904000] USB Mass Storage support registered.May 6 12:03:25 x3 kernel: [ 669.904000] usb-storage: device found at 3May 6 12:03:25 x3 kernel: [ 669.904000] usb-storage: waiting for device to settle before scanningMay 6 12:03:30 x3 kernel: [ 674.904000] usb-storage: device scan completeMay 6 12:03:30 x3 kernel: [ 674.904000] scsi 6:0:0:0: Direct-Access USB FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCSMay 6 12:03:30 x3 kernel: [ 675.148000] SCSI device sdb: 8060928 512-byte hdwr sectors (4127 MB)May 6 12:03:30 x3 kernel: [ 675.148000] sdb: Write Protect is offMay 6 12:03:30 x3 kernel: [ 675.148000] sdb: Mode Sense: 23 00 00 00May 6 12:03:30 x3 kernel: [ 675.148000] sdb: assuming drive cache: write throughMay 6 12:03:30 x3 kernel: [ 675.152000] SCSI device sdb: 8060928 512-byte hdwr sectors (4127 MB)May 6 12:03:30 x3 kernel: [ 675.152000] sdb: Write Protect is offMay 6 12:03:30 x3 kernel: [ 675.152000] sdb: Mode Sense: 23 00 00 00May 6 12:03:30 x3 kernel: [ 675.152000] sdb: assuming drive cache: write throughMay 6 12:03:30 x3 kernel: [ 675.152000] sdb: sdb1May 6 12:03:30 x3 kernel: [ 675.152000] sd 6:0:0:0: Attached scsi removable disk sdbMay 6 12:03:30 x3 kernel: [ 675.152000] sd 6:0:0:0: Attached scsi generic sg2 type 0May 6 12:29:39 x3 kernel: [ 2243.916000] usb 5-2: USB disconnect, address 3May 6 13:01:01 x3 kernel: [ 4126.748000] usb 3-1: new full speed USB device using uhci_hcd and address 2May 6 13:01:02 x3 kernel: [ 4126.912000] usb 3-1: configuration #1 chosen from 1 choiceMay 6 13:02:19 x3 kernel: [ 4203.992000] ttyS1: LSR safety check engaged!May 6 13:02:19 x3 kernel: [ 4204.332000] usb 3-1: usbfs: usb_submit_urb returned -22May 6 13:02:35 x3 kernel: [ 4220.328000] ttyS1: LSR safety check engaged!May 6 13:03:35 x3 kernel: [ 4280.664000] ttyS1: LSR safety check engaged!May 6 13:03:47 x3 kernel: [ 4292.328000] ttyS1: LSR safety check engaged!May 6 13:04:06 x3 kernel: [ 4311.128000] ttyS1: LSR safety check engaged!May 6 13:04:42 x3 kernel: [ 4347.776000] usb 3-1: USB disconnect, address 2May 6 13:04:45 x3 kernel: [ 4350.648000] usb 3-1: new full speed USB device using uhci_hcd and address 3May 6 13:04:46 x3 kernel: [ 4350.808000] usb 3-1: configuration #1 chosen from 1 choiceMay 6 13:05:00 x3 kernel: [ 4364.948000] ttyS1: LSR safety check engaged!May 6 13:05:29 x3 kernel: [ 4393.984000] ttyS1: LSR safety check engaged!May 6 13:05:29 x3 kernel: [ 4394.292000] usb 3-1: usbfs: usb_submit_urb returned -22May 6 13:07:13 x3 kernel: [ 4498.016000] ttyS1: LSR safety check engaged!May 6 13:07:50 x3 kernel: [ 4535.664000] usb 3-1: USB disconnect, address 3May 6 13:08:18 x3 kernel: [ 4563.684000] ttyS1: LSR safety check engaged!May 6 13:08:48 x3 kernel: [ 4593.228000] usb 5-5: new high speed USB device using ehci_hcd and address 6May 6 13:08:48 x3 kernel: [ 4593.428000] usb 5-5: configuration #1 chosen from 1 choiceMay 6 13:08:48 x3 kernel: [ 4593.428000] scsi7 : SCSI emulation for USB Mass Storage devicesMay 6 13:08:48 x3 kernel: [ 4593.428000] usb-storage: device found at 6May 6 13:08:48 x3 kernel: [ 4593.428000] usb-storage: waiting for device to settle before scanningMay 6 13:08:53 x3 kernel: [ 4598.432000] usb-storage: device scan completeMay 6 13:08:53 x3 kernel: [ 4598.436000] scsi 7:0:0:0: Direct-Access SMSC USB 2 HS-CF 1.97 PQ: 0 ANSI: 0May 6 13:08:53 x3 kernel: [ 4598.436000] scsi 7:0:0:1: Direct-Access SMSC USB 2 HS-MS 1.97 PQ: 0 ANSI: 0May 6 13:08:53 x3 kernel: [ 4598.440000] scsi 7:0:0:2: Direct-Access SMSC USB 2 HS-SM 1.97 PQ: 0 ANSI: 0May 6 13:08:53 x3 kernel: [ 4598.444000] scsi 7:0:0:3: Direct-Access SMSC USB 2 HS-SD/MMC 1.97 PQ: 0 ANSI: 0May 6 13:08:53 x3 kernel: [ 4598.448000] sd 7:0:0:0: Attached scsi removable disk sdbMay 6 13:08:53 x3 kernel: [ 4598.448000] sd 7:0:0:0: Attached scsi generic sg2 type 0May 6 13:08:53 x3 kernel: [ 4598.448000] sd 7:0:0:1: Attached scsi removable disk sdcMay 6 13:08:53 x3 kernel: [ 4598.448000] sd 7:0:0:1: Attached scsi generic sg3 type 0May 6 13:08:53 x3 kernel: [ 4598.452000] sd 7:0:0:2: Attached scsi removable disk sddMay 6 13:08:53 x3 kernel: [ 4598.452000] sd 7:0:0:2: Attached scsi generic sg4 type 0May 6 13:08:53 x3 kernel: [ 4598.504000] sd 7:0:0:3: Attached scsi removable disk sdeMay 6 13:08:53 x3 kernel: [ 4598.504000] sd 7:0:0:3: Attached scsi generic sg5 type 0May 6 13:08:58 x3 kernel: [ 4602.892000] SCSI device sde: 1999872 512-byte hdwr sectors (1024 MB)May 6 13:08:58 x3 kernel: [ 4602.892000] sde: Write Protect is offMay 6 13:08:58 x3 kernel: [ 4602.892000] sde: Mode Sense: 03 00 00 00May 6 13:08:58 x3 kernel: [ 4602.892000] sde: assuming drive cache: write throughMay 6 13:08:58 x3 kernel: [ 4602.896000] SCSI device sde: 1999872 512-byte hdwr sectors (1024 MB)May 6 13:08:58 x3 kernel: [ 4602.900000] sde: Write Protect is offMay 6 13:08:58 x3 kernel: [ 4602.900000] sde: Mode Sense: 03 00 00 00May 6 13:08:58 x3 kernel: [ 4602.900000] sde: assuming drive cache: write throughMay 6 13:08:58 x3 kernel: [ 4602.900000] sde: sde1May 6 13:09:28 x3 kernel: [ 4633.376000] ttyS1: LSR safety check engaged!May 6 13:10:04 x3 kernel: [ 4669.136000] SCSI device sde: 1999872 512-byte hdwr sectors (1024 MB)May 6 13:10:04 x3 kernel: [ 4669.136000] sde: Write Protect is offMay 6 13:10:04 x3 kernel: [ 4669.136000] sde: Mode Sense: 03 00 00 00May 6 13:10:04 x3 kernel: [ 4669.136000] sde: assuming drive cache: write throughMay 6 13:10:04 x3 kernel: [ 4669.140000] SCSI device sde: 1999872 512-byte hdwr sectors (1024 MB)May 6 13:10:04 x3 kernel: [ 4669.144000] sde: Write Protect is offMay 6 13:10:04 x3 kernel: [ 4669.144000] sde: Mode Sense: 03 00 00 00May 6 13:10:04 x3 kernel: [ 4669.144000] sde: assuming drive cache: write throughMay 6 13:10:04 x3 kernel: [ 4669.144000] sde: sde1May 6 13:10:47 x3 kernel: [ 4712.436000] usb 5-5: USB disconnect, address 6May 6 13:10:52 x3 kernel: [ 4716.764000] usb 5-2: new high speed USB device using ehci_hcd and address 7May 6 13:10:52 x3 kernel: [ 4716.964000] usb 5-2: configuration #1 chosen from 1 choiceMay 6 13:10:52 x3 kernel: [ 4716.964000] scsi8 : SCSI emulation for USB Mass Storage devicesMay 6 13:10:52 x3 kernel: [ 4716.964000] usb-storage: device found at 7May 6 13:10:52 x3 kernel: [ 4716.964000] usb-storage: waiting for device to settle before scanningMay 6 13:10:57 x3 kernel: [ 4721.968000] usb-storage: device scan completeMay 6 13:10:57 x3 kernel: [ 4721.972000] scsi 8:0:0:0: Direct-Access SMSC USB 2 HS-CF 1.97 PQ: 0 ANSI: 0May 6 13:10:57 x3 kernel: [ 4721.972000] scsi 8:0:0:1: Direct-Access SMSC USB 2 HS-MS 1.97 PQ: 0 ANSI: 0May 6 13:10:57 x3 kernel: [ 4721.976000] scsi 8:0:0:2: Direct-Access SMSC USB 2 HS-SM 1.97 PQ: 0 ANSI: 0May 6 13:10:57 x3 kernel: [ 4721.980000] scsi 8:0:0:3: Direct-Access SMSC USB 2 HS-SD/MMC 1.97 PQ: 0 ANSI: 0May 6 13:10:57 x3 kernel: [ 4721.984000] sd 8:0:0:0: Attached scsi removable disk sdbMay 6 13:10:57 x3 kernel: [ 4721.984000] sd 8:0:0:0: Attached scsi generic sg2 type 0May 6 13:10:57 x3 kernel: [ 4721.988000] sd 8:0:0:1: Attached scsi removable disk sdcMay 6 13:10:57 x3 kernel: [ 4721.988000] sd 8:0:0:1: Attached scsi generic sg3 type 0May 6 13:10:57 x3 kernel: [ 4721.988000] sd 8:0:0:2: Attached scsi removable disk sddMay 6 13:10:57 x3 kernel: [ 4721.988000] sd 8:0:0:2: Attached scsi generic sg4 type 0May 6 13:10:57 x3 kernel: [ 4722.140000] SCSI device sde: 1999872 512-byte hdwr sectors (1024 MB)May 6 13:10:57 x3 kernel: [ 4722.140000] sde: Write Protect is offMay 6 13:10:57 x3 kernel: [ 4722.140000] sde: Mode Sense: 03 00 00 00May 6 13:10:57 x3 kernel: [ 4722.140000] sde: assuming drive cache: write throughMay 6 13:10:57 x3 kernel: [ 4722.152000] SCSI device sde: 1999872 512-byte hdwr sectors (1024 MB)May 6 13:10:57 x3 kernel: [ 4722.152000] sde: Write Protect is offMay 6 13:10:57 x3 kernel: [ 4722.152000] sde: Mode Sense: 03 00 00 00May 6 13:10:57 x3 kernel: [ 4722.152000] sde: assuming drive cache: write throughMay 6 13:10:57 x3 kernel: [ 4722.152000] sde: sde1May 6 13:10:57 x3 kernel: [ 4722.156000] sd 8:0:0:3: Attached scsi removable disk sdeMay 6 13:10:57 x3 kernel: [ 4722.156000] sd 8:0:0:3: Attached scsi generic sg5 type 0May 6 13:27:41 x3 kernel: [ 5725.676000] usb 5-2: USB disconnect, address 7May 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:0: rejecting I/O to dead deviceMay 6 13:27:41 x3 last message repeated 3 timesMay 6 13:27:41 x3 kernel: [ 5725.676000] sdb : READ CAPACITY failed.May 6 13:27:41 x3 kernel: [ 5725.676000] sdb : status=0, message=00, host=1, driver=00 May 6 13:27:41 x3 kernel: [ 5725.676000] sdb : sense not available. May 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:0: rejecting I/O to dead deviceMay 6 13:27:41 x3 kernel: [ 5725.676000] sdb: Write Protect is offMay 6 13:27:41 x3 kernel: [ 5725.676000] sdb: Mode Sense: 00 00 00 00May 6 13:27:41 x3 kernel: [ 5725.676000] sdb: assuming drive cache: write throughMay 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:0: rejecting I/O to dead deviceMay 6 13:27:41 x3 last message repeated 4 timesMay 6 13:27:41 x3 kernel: [ 5725.676000] sdb : READ CAPACITY failed.May 6 13:27:41 x3 kernel: [ 5725.676000] sdb : status=0, message=00, host=1, driver=00 May 6 13:27:41 x3 kernel: [ 5725.676000] sdb : sense not available. May 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:0: rejecting I/O to dead deviceMay 6 13:27:41 x3 kernel: [ 5725.676000] sdb: Write Protect is offMay 6 13:27:41 x3 kernel: [ 5725.676000] sdb: Mode Sense: 00 00 00 00May 6 13:27:41 x3 kernel: [ 5725.676000] sdb: assuming drive cache: write throughMay 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:0: rejecting I/O to dead deviceMay 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:1: rejecting I/O to dead deviceMay 6 13:27:41 x3 last message repeated 3 timesMay 6 13:27:41 x3 kernel: [ 5725.676000] sdc : READ CAPACITY failed.May 6 13:27:41 x3 kernel: [ 5725.676000] sdc : status=0, message=00, host=1, driver=00 May 6 13:27:41 x3 kernel: [ 5725.676000] sdc : sense not available. May 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:1: rejecting I/O to dead deviceMay 6 13:27:41 x3 kernel: [ 5725.676000] sdc: Write Protect is offMay 6 13:27:41 x3 kernel: [ 5725.676000] sdc: Mode Sense: 00 00 00 00May 6 13:27:41 x3 kernel: [ 5725.676000] sdc: assuming drive cache: write throughMay 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:1: rejecting I/O to dead deviceMay 6 13:27:41 x3 last message repeated 4 timesMay 6 13:27:41 x3 kernel: [ 5725.676000] sdc : READ CAPACITY failed.May 6 13:27:41 x3 kernel: [ 5725.676000] sdc : status=0, message=00, host=1, driver=00 May 6 13:27:41 x3 kernel: [ 5725.676000] sdc : sense not available. May 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:1: rejecting I/O to dead deviceMay 6 13:27:41 x3 kernel: [ 5725.676000] sdc: Write Protect is offMay 6 13:27:41 x3 kernel: [ 5725.676000] sdc: Mode Sense: 00 00 00 00May 6 13:27:41 x3 kernel: [ 5725.676000] sdc: assuming drive cache: write throughMay 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:1: rejecting I/O to dead deviceMay 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:3: rejecting I/O to dead deviceMay 6 13:27:41 x3 last message repeated 3 timesMay 6 13:27:41 x3 kernel: [ 5725.676000] sde : READ CAPACITY failed.May 6 13:27:41 x3 kernel: [ 5725.676000] sde : status=0, message=00, host=1, driver=00 May 6 13:27:41 x3 kernel: [ 5725.676000] sde : sense not available. May 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:3: rejecting I/O to dead deviceMay 6 13:27:41 x3 kernel: [ 5725.676000] sde: Write Protect is offMay 6 13:27:41 x3 kernel: [ 5725.676000] sde: Mode Sense: 00 00 00 00May 6 13:27:41 x3 kernel: [ 5725.676000] sde: assuming drive cache: write throughMay 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:3: rejecting I/O to dead deviceMay 6 13:27:41 x3 last message repeated 3 timesMay 6 13:27:41 x3 kernel: [ 5725.676000] sde : READ CAPACITY failed.May 6 13:27:41 x3 kernel: [ 5725.676000] sde : status=0, message=00, host=1, driver=00 May 6 13:27:41 x3 kernel: [ 5725.676000] sde : sense not available. May 6 13:27:41 x3 kernel: [ 5725.676000] scsi 8:0:0:3: rejecting I/O to dead deviceMay 6 13:27:41 x3 kernel: [ 5725.676000] sde: Write Protect is offMay 6 13:27:41 x3 kernel: [ 5725.676000] sde: Mode Sense: 00 00 00 00May 6 13:27:41 x3 kernel: [ 5725.676000] sde: assuming drive cache: write throughMay 6 13:29:11 x3 kernel: Inspecting /boot/System.map-2.6.20-15-genericMay 6 13:29:11 x3 kernel: Loaded 24975 symbols from /boot/System.map-2.6.20-15-generic.May 6 13:29:11 x3 kernel: Symbols match kernel version 2.6.20.May 6 13:29:11 x3 kernel: No module symbols loaded - kernel modules not enabled. May 6 13:29:11 x3 kernel: [ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-provided physical RAM map:May 6 13:29:11 x3 kernel: [ 0.000000] sanitize startMay 6 13:29:11 x3 kernel: [ 0.000000] sanitize endMay 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() type is E820_RAMMay 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fdd0000 end: 000000001fed0000 type: 1May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() type is E820_RAMMay 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001fed0000 size: 000000000000f000 end: 000000001fedf000 type: 3May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001fedf000 size: 0000000000021000 end: 000000001ff00000 type: 4May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: 00000000f4000000 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fed0000 (usable)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 000000001fed0000 - 000000001fedf000 (ACPI data)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 000000001fedf000 - 000000001ff00000 (ACPI NVS)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)May 6 13:29:11 x3 kernel: [ 0.000000] 0MB HIGHMEM available.May 6 13:29:11 x3 kernel: [ 0.000000] 510MB LOWMEM available.May 6 13:29:11 x3 kernel: [ 0.000000] found SMP MP-table at 000f6810May 6 13:29:11 x3 kernel: [ 0.000000] Entering add_active_range(0, 0, 130768) 0 entries of 256 usedMay 6 13:29:11 x3 kernel: [ 0.000000] Zone PFN ranges:May 6 13:29:11 x3 kernel: [ 0.000000] DMA 0 -> 4096May 6 13:29:11 x3 kernel: [ 0.000000] Normal 4096 -> 130768May 6 13:29:11 x3 kernel: [ 0.000000] HighMem 130768 -> 130768May 6 13:29:11 x3 kernel: [ 0.000000] early_node_map[1] active PFN rangesMay 6 13:29:11 x3 kernel: [ 0.000000] 0: 0 -> 130768May 6 13:29:11 x3 kernel: [ 0.000000] On node 0 totalpages: 130768May 6 13:29:11 x3 kernel: [ 0.000000] DMA zone: 32 pages used for memmapMay 6 13:29:11 x3 kernel: [ 0.000000] DMA zone: 0 pages reservedMay 6 13:29:11 x3 kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0May 6 13:29:11 x3 kernel: [ 0.000000] Normal zone: 989 pages used for memmapMay 6 13:29:11 x3 kernel: [ 0.000000] Normal zone: 125683 pages, LIFO batch:31May 6 13:29:11 x3 kernel: [ 0.000000] HighMem zone: 0 pages used for memmapMay 6 13:29:11 x3 kernel: [ 0.000000] DMI present.May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: RSDP (v002 LENOVO ) @ 0x000f67d0May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: XSDT (v001 LENOVO TP-79 0x00002090 LTP 0x00000000) @ 0x1fed1486May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: FADT (v003 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fed1600May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 MSFT 0x0100000e) @ 0x1fed17b4May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: ECDT (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fededdfMay 6 13:29:11 x3 kernel: [ 0.000000] ACPI: TCPA (v002 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedee31May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: MADT (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedee63May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: MCFG (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedeecbMay 6 13:29:11 x3 kernel: [ 0.000000] ACPI: HPET (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedef07May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: BOOT (v001 LENOVO TP-79 0x00002090 LTP 0x00000001) @ 0x1fedefd8May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef2697May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef28f6May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef299cMay 6 13:29:11 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef2e93May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: DSDT (v001 LENOVO TP-79 0x00002090 MSFT 0x0100000e) @ 0x00000000May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)May 6 13:29:11 x3 kernel: [ 0.000000] Processor #0 6:14 APIC version 20May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)May 6 13:29:11 x3 kernel: [ 0.000000] Processor #1 6:14 APIC version 20May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])May 6 13:29:11 x3 kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: IRQ0 used by override.May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: IRQ2 used by override.May 6 13:29:11 x3 kernel: [ 0.000000] ACPI: IRQ9 used by override.May 6 13:29:11 x3 kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsMay 6 13:29:11 x3 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000May 6 13:29:11 x3 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationMay 6 13:29:11 x3 kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)May 6 13:29:11 x3 kernel: [ 0.000000] Detected 1995.225 MHz processor.May 6 13:29:11 x3 kernel: [ 14.728168] Built 1 zonelists. Total pages: 129747May 6 13:29:11 x3 kernel: [ 14.728172] Kernel command line: root=UUID=749d2629-36cd-4da7-b622-21add63394e3 ro quiet splashMay 6 13:29:11 x3 kernel: [ 14.728309] mapped APIC to ffffd000 (fee00000)May 6 13:29:11 x3 kernel: [ 14.728311] mapped IOAPIC to ffffc000 (fec00000)May 6 13:29:11 x3 kernel: [ 14.728313] Enabling fast FPU save and restore... done.May 6 13:29:11 x3 kernel: [ 14.728316] Enabling unmasked SIMD FPU exception support... done.May 6 13:29:11 x3 kernel: [ 14.728322] Initializing CPU#0May 6 13:29:11 x3 kernel: [ 14.728392] PID hash table entries: 2048 (order: 11, 8192 bytes)May 6 13:29:11 x3 kernel: [ 14.730831] Console: colour VGA+ 80x25May 6 13:29:11 x3 kernel: [ 14.730969] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)May 6 13:29:11 x3 kernel: [ 14.731126] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)May 6 13:29:11 x3 kernel: [ 14.741298] Memory: 507328k/523072k available (1992k kernel code, 15216k reserved, 893k data, 328k init, 0k highmem)May 6 13:29:11 x3 kernel: [ 14.741306] virtual kernel memory layout:May 6 13:29:11 x3 kernel: [ 14.741307] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)May 6 13:29:11 x3 kernel: [ 14.741308] pkmap : 0xff800000 - 0xffc00000 (4096 kB)May 6 13:29:11 x3 kernel: [ 14.741309] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)May 6 13:29:11 x3 kernel: [ 14.741310] lowmem : 0xc0000000 - 0xdfed0000 ( 510 MB)May 6 13:29:11 x3 kernel: [ 14.741311] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)May 6 13:29:11 x3 kernel: [ 14.741312] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)May 6 13:29:11 x3 kernel: [ 14.741313] .text : 0xc0100000 - 0xc02f2264 (1992 kB)May 6 13:29:11 x3 kernel: [ 14.741316] Checking if this processor honours the WP bit even in supervisor mode... Ok.May 6 13:29:11 x3 kernel: [ 14.741466] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0May 6 13:29:11 x3 kernel: [ 14.741470] hpet0: 3 64-bit timers, 14318180 HzMay 6 13:29:11 x3 kernel: [ 14.742476] Using HPET for base-timerMay 6 13:29:11 x3 kernel: [ 14.821425] Calibrating delay using timer specific routine.. 3994.35 BogoMIPS (lpj=7988712)May 6 13:29:11 x3 kernel: [ 14.821460] Security Framework v1.0.0 initializedMay 6 13:29:11 x3 kernel: [ 14.821466] SELinux: Disabled at boot.May 6 13:29:11 x3 kernel: [ 14.821479] Mount-cache hash table entries: 512May 6 13:29:11 x3 kernel: [ 14.821587] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 6 13:29:11 x3 kernel: [ 14.821594] monitor/mwait feature present.May 6 13:29:11 x3 kernel: [ 14.821596] using mwait in idle threads.May 6 13:29:11 x3 kernel: [ 14.821599] CPU: L1 I cache: 32K, L1 D cache: 32KMay 6 13:29:11 x3 kernel: [ 14.821601] CPU: L2 cache: 2048KMay 6 13:29:11 x3 kernel: [ 14.821604] CPU: Physical Processor ID: 0May 6 13:29:11 x3 kernel: [ 14.821605] CPU: Processor Core ID: 0May 6 13:29:11 x3 kernel: [ 14.821607] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 6 13:29:11 x3 kernel: [ 14.821615] Compat vDSO mapped to ffffe000.May 6 13:29:11 x3 kernel: [ 14.821618] Remapping vsyscall page to ffffe000May 6 13:29:11 x3 kernel: [ 14.821628] Checking 'hlt' instruction... OK.May 6 13:29:11 x3 kernel: [ 14.837500] SMP alternatives: switching to UP codeMay 6 13:29:11 x3 kernel: [ 14.837783] Early unpacking initramfs... doneMay 6 13:29:11 x3 kernel: [ 15.122668] ACPI: Core revision 20060707May 6 13:29:11 x3 kernel: [ 15.122866] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.May 6 13:29:11 x3 kernel: [ 15.150065] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 6 13:29:11 x3 kernel: [ 15.150083] SMP alternatives: switching to SMP codeMay 6 13:29:11 x3 kernel: [ 15.150188] Booting processor 1/1 eip 3000May 6 13:29:11 x3 kernel: [ 15.160873] Initializing CPU#1May 6 13:29:11 x3 kernel: [ 15.241479] Calibrating delay using timer specific routine.. 3990.10 BogoMIPS (lpj=7980212)May 6 13:29:11 x3 kernel: [ 15.241485] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 6 13:29:11 x3 kernel: [ 15.241490] monitor/mwait feature present.May 6 13:29:11 x3 kernel: [ 15.241493] CPU: L1 I cache: 32K, L1 D cache: 32KMay 6 13:29:11 x3 kernel: [ 15.241494] CPU: L2 cache: 2048KMay 6 13:29:11 x3 kernel: [ 15.241497] CPU: Physical Processor ID: 0May 6 13:29:11 x3 kernel: [ 15.241498] CPU: Processor Core ID: 1May 6 13:29:11 x3 kernel: [ 15.241499] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 6 13:29:11 x3 kernel: [ 15.241625] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 6 13:29:11 x3 kernel: [ 15.241647] Total of 2 processors activated (7984.46 BogoMIPS).May 6 13:29:11 x3 kernel: [ 15.241843] ENABLING IO-APIC IRQsMay 6 13:29:11 x3 kernel: [ 15.242043] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1May 6 13:29:11 x3 kernel: [ 15.389114] checking TSC synchronization across 2 CPUs: May 6 13:29:11 x3 kernel: [ 0.000001] CPU#0 had -142 usecs TSC skew, fixed it up.May 6 13:29:11 x3 kernel: [ 0.000003] CPU#1 had 142 usecs TSC skew, fixed it up.May 6 13:29:11 x3 kernel: [ 0.003998] Brought up 2 CPUsMay 6 13:29:11 x3 kernel: [ 0.191589] migration_cost=64May 6 13:29:11 x3 kernel: [ 0.191833] Booting paravirtualized kernel on bare hardwareMay 6 13:29:11 x3 kernel: [ 0.191938] Time: 13:28:41 Date: 04/06/107May 6 13:29:11 x3 kernel: [ 0.191965] NET: Registered protocol family 16May 6 13:29:11 x3 kernel: [ 0.192040] EISA bus registeredMay 6 13:29:11 x3 kernel: [ 0.192046] ACPI: bus type pci registeredMay 6 13:29:11 x3 kernel: [ 0.192172] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24May 6 13:29:11 x3 kernel: [ 0.192174] PCI: Using configuration type 1May 6 13:29:11 x3 kernel: [ 0.192176] Setting up standard PCI resourcesMay 6 13:29:11 x3 kernel: [ 0.214405] ACPI: Interpreter enabledMay 6 13:29:11 x3 kernel: [ 0.214407] ACPI: Using IOAPIC for interrupt routingMay 6 13:29:11 x3 kernel: [ 0.215143] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:29:11 x3 kernel: [ 0.215682] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:29:11 x3 kernel: [ 0.216224] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:29:11 x3 kernel: [ 0.216762] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:29:11 x3 kernel: [ 0.217297] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:29:11 x3 kernel: [ 0.217834] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:29:11 x3 kernel: [ 0.218369] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:29:11 x3 kernel: [ 0.218904] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:29:11 x3 kernel: [ 0.219249] ACPI: PCI Root Bridge [PCI0] (0000:00)May 6 13:29:11 x3 kernel: [ 0.219254] PCI: Probing PCI hardware (bus 00)May 6 13:29:11 x3 kernel: [ 0.221012] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCOMay 6 13:29:11 x3 kernel: [ 0.221016] PCI quirk: region 1180-11bf claimed by ICH6 GPIOMay 6 13:29:11 x3 kernel: [ 0.221343] Boot video device is 0000:01:00.0May 6 13:29:11 x3 kernel: [ 0.222308] PCI: Transparent bridge - 0000:00:1e.0May 6 13:29:11 x3 kernel: [ 0.222457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]May 6 13:29:11 x3 kernel: [ 0.227248] ACPI: Power Resource [PUBS] (on)May 6 13:29:11 x3 kernel: [ 0.228320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]May 6 13:29:11 x3 kernel: [ 0.228617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]May 6 13:29:11 x3 kernel: [ 0.228783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]May 6 13:29:11 x3 kernel: [ 0.228948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]May 6 13:29:11 x3 kernel: [ 0.229149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]May 6 13:29:11 x3 kernel: [ 0.229347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]May 6 13:29:11 x3 kernel: [ 0.231247] Linux Plug and Play Support v0.97 (c) Adam BelayMay 6 13:29:11 x3 kernel: [ 0.231258] pnp: PnP ACPI initMay 6 13:29:11 x3 kernel: [ 0.235887] pnp: PnP ACPI: found 12 devicesMay 6 13:29:11 x3 kernel: [ 0.235890] PnPBIOS: Disabled by ACPI PNPMay 6 13:29:11 x3 kernel: [ 0.235929] PCI: Using ACPI for IRQ routingMay 6 13:29:11 x3 kernel: [ 0.235931] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportMay 6 13:29:11 x3 kernel: [ 0.290030] NET: Registered protocol family 8May 6 13:29:11 x3 kernel: [ 0.290032] NET: Registered protocol family 20May 6 13:29:11 x3 kernel: [ 0.290959] PCI: Bridge: 0000:00:01.0May 6 13:29:11 x3 kernel: [ 0.290961] IO window: 2000-2fffMay 6 13:29:11 x3 kernel: [ 0.290965] MEM window: ee100000-ee1fffffMay 6 13:29:11 x3 kernel: [ 0.290968] PREFETCH window: d8000000-dfffffffMay 6 13:29:11 x3 kernel: [ 0.290971] PCI: Bridge: 0000:00:1c.0May 6 13:29:11 x3 kernel: [ 0.290974] IO window: 3000-3fffMay 6 13:29:11 x3 kernel: [ 0.290980] MEM window: ee000000-ee0fffffMay 6 13:29:11 x3 kernel: [ 0.290984] PREFETCH window: disabled.May 6 13:29:11 x3 kernel: [ 0.290990] PCI: Bridge: 0000:00:1c.1May 6 13:29:11 x3 kernel: [ 0.290992] IO window: 4000-5fffMay 6 13:29:11 x3 kernel: [ 0.290998] MEM window: ec000000-edffffffMay 6 13:29:11 x3 kernel: [ 0.291003] PREFETCH window: e4000000-e40fffffMay 6 13:29:11 x3 kernel: [ 0.291008] PCI: Bridge: 0000:00:1c.2May 6 13:29:11 x3 kernel: [ 0.291011] IO window: 6000-7fffMay 6 13:29:11 x3 kernel: [ 0.291017] MEM window: e8000000-e9ffffffMay 6 13:29:11 x3 kernel: [ 0.291021] PREFETCH window: e4100000-e41fffffMay 6 13:29:11 x3 kernel: [ 0.291027] PCI: Bridge: 0000:00:1c.3May 6 13:29:11 x3 kernel: [ 0.291030] IO window: 8000-9fffMay 6 13:29:11 x3 kernel: [ 0.291035] MEM window: ea000000-ebffffffMay 6 13:29:11 x3 kernel: [ 0.291040] PREFETCH window: e4200000-e42fffffMay 6 13:29:11 x3 kernel: [ 0.291047] PCI: Bus 22, cardbus bridge: 0000:15:00.0May 6 13:29:11 x3 kernel: [ 0.291049] IO window: 0000a000-0000a0ffMay 6 13:29:11 x3 kernel: [ 0.291055] IO window: 0000a400-0000a4ffMay 6 13:29:11 x3 kernel: [ 0.291060] PREFETCH window: e0000000-e3ffffffMay 6 13:29:11 x3 kernel: [ 0.291065] MEM window: 30000000-33ffffffMay 6 13:29:11 x3 kernel: [ 0.291070] PCI: Bridge: 0000:00:1e.0May 6 13:29:11 x3 kernel: [ 0.291073] IO window: a000-dfffMay 6 13:29:11 x3 kernel: [ 0.291079] MEM window: e4300000-e7ffffffMay 6 13:29:11 x3 kernel: [ 0.291083] PREFETCH window: e0000000-e3ffffffMay 6 13:29:11 x3 kernel: [ 0.291099] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 13:29:11 x3 kernel: [ 0.291103] PCI: Setting latency timer of device 0000:00:01.0 to 64May 6 13:29:11 x3 kernel: [ 0.291125] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17May 6 13:29:11 x3 kernel: [ 0.291130] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 6 13:29:11 x3 kernel: [ 0.291152] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18May 6 13:29:11 x3 kernel: [ 0.291158] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 6 13:29:11 x3 kernel: [ 0.291180] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19May 6 13:29:11 x3 kernel: [ 0.291185] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 6 13:29:11 x3 kernel: [ 0.291208] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20May 6 13:29:11 x3 kernel: [ 0.291213] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 6 13:29:11 x3 kernel: [ 0.291224] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)May 6 13:29:11 x3 kernel: [ 0.291229] PCI: Setting latency timer of device 0000:00:1e.0 to 64May 6 13:29:11 x3 kernel: [ 0.291246] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 13:29:11 x3 kernel: [ 0.291276] NET: Registered protocol family 2May 6 13:29:11 x3 kernel: [ 0.331853] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)May 6 13:29:11 x3 kernel: [ 0.331919] TCP established hash table entries: 16384 (order: 5, 131072 bytes)May 6 13:29:11 x3 kernel: [ 0.331997] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)May 6 13:29:11 x3 kernel: [ 0.332037] TCP: Hash tables configured (established 16384 bind 8192)May 6 13:29:11 x3 kernel: [ 0.332040] TCP reno registeredMay 6 13:29:11 x3 kernel: [ 0.347895] checking if image is initramfs... it isMay 6 13:29:11 x3 kernel: [ 0.913402] Freeing initrd memory: 6995k freedMay 6 13:29:11 x3 kernel: [ 0.913578] Simple Boot Flag at 0x35 set to 0x1May 6 13:29:11 x3 kernel: [ 0.913997] audit: initializing netlink socket (disabled)May 6 13:29:11 x3 kernel: [ 0.914012] audit(1178458122.624:1): initializedMay 6 13:29:11 x3 kernel: [ 0.914170] VFS: Disk quotas dquot_6.5.1May 6 13:29:11 x3 kernel: [ 0.914188] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)May 6 13:29:11 x3 kernel: [ 0.914233] io scheduler noop registeredMay 6 13:29:11 x3 kernel: [ 0.914235] io scheduler anticipatory registeredMay 6 13:29:11 x3 kernel: [ 0.914237] io scheduler deadline registeredMay 6 13:29:11 x3 kernel: [ 0.914248] io scheduler cfq registered (default)May 6 13:29:11 x3 kernel: [ 0.914478] PCI: Setting latency timer of device 0000:00:01.0 to 64May 6 13:29:11 x3 kernel: [ 0.914509] assign_interrupt_mode Found MSI capabilityMay 6 13:29:11 x3 kernel: [ 0.914512] Allocate Port Service[0000:00:01.0:pcie00]May 6 13:29:11 x3 kernel: [ 0.914589] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 6 13:29:11 x3 kernel: [ 0.914642] assign_interrupt_mode Found MSI capabilityMay 6 13:29:11 x3 kernel: [ 0.914645] Allocate Port Service[0000:00:1c.0:pcie00]May 6 13:29:11 x3 kernel: [ 0.914675] Allocate Port Service[0000:00:1c.0:pcie02]May 6 13:29:11 x3 kernel: [ 0.914786] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 6 13:29:11 x3 kernel: [ 0.914840] assign_interrupt_mode Found MSI capabilityMay 6 13:29:11 x3 kernel: [ 0.914842] Allocate Port Service[0000:00:1c.1:pcie00]May 6 13:29:11 x3 kernel: [ 0.914869] Allocate Port Service[0000:00:1c.1:pcie02]May 6 13:29:11 x3 kernel: [ 0.914978] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 6 13:29:11 x3 kernel: [ 0.915032] assign_interrupt_mode Found MSI capabilityMay 6 13:29:11 x3 kernel: [ 0.915034] Allocate Port Service[0000:00:1c.2:pcie00]May 6 13:29:11 x3 kernel: [ 0.915062] Allocate Port Service[0000:00:1c.2:pcie02]May 6 13:29:11 x3 kernel: [ 0.915172] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 6 13:29:11 x3 kernel: [ 0.915225] assign_interrupt_mode Found MSI capabilityMay 6 13:29:11 x3 kernel: [ 0.915227] Allocate Port Service[0000:00:1c.3:pcie00]May 6 13:29:11 x3 kernel: [ 0.915261] Allocate Port Service[0000:00:1c.3:pcie02]May 6 13:29:11 x3 kernel: [ 0.915419] isapnp: Scanning for PnP cards...May 6 13:29:11 x3 kernel: [ 1.270221] isapnp: No Plug & Play device foundMay 6 13:29:11 x3 kernel: [ 1.289850] Real Time Clock Driver v1.12acMay 6 13:29:11 x3 kernel: [ 1.289901] hpet_resources: 0xfed00000 is busyMay 6 13:29:11 x3 kernel: [ 1.289926] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledMay 6 13:29:11 x3 kernel: [ 1.290130] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550AMay 6 13:29:11 x3 kernel: [ 1.290610] mice: PS/2 mouse device common for all miceMay 6 13:29:11 x3 kernel: [ 1.291091] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeMay 6 13:29:11 x3 kernel: [ 1.291321] input: Macintosh mouse button emulation as /class/input/input0May 6 13:29:11 x3 kernel: [ 1.291351] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2May 6 13:29:11 x3 kernel: [ 1.291354] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxMay 6 13:29:11 x3 kernel: [ 1.291631] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12May 6 13:29:11 x3 kernel: [ 1.301192] serio: i8042 KBD port at 0x60,0x64 irq 1May 6 13:29:11 x3 kernel: [ 1.301196] serio: i8042 AUX port at 0x60,0x64 irq 12May 6 13:29:11 x3 kernel: [ 1.301294] EISA: Probing bus 0 at eisa.0May 6 13:29:11 x3 kernel: [ 1.301303] Cannot allocate resource for EISA slot 1May 6 13:29:11 x3 kernel: [ 1.301306] Cannot allocate resource for EISA slot 2May 6 13:29:11 x3 kernel: [ 1.301308] Cannot allocate resource for EISA slot 3May 6 13:29:11 x3 kernel: [ 1.301310] Cannot allocate resource for EISA slot 4May 6 13:29:11 x3 kernel: [ 1.301312] Cannot allocate resource for EISA slot 5May 6 13:29:11 x3 kernel: [ 1.301314] Cannot allocate resource for EISA slot 6May 6 13:29:11 x3 kernel: [ 1.301316] Cannot allocate resource for EISA slot 7May 6 13:29:11 x3 kernel: [ 1.301319] Cannot allocate resource for EISA slot 8May 6 13:29:11 x3 kernel: [ 1.301320] EISA: Detected 0 cards.May 6 13:29:11 x3 kernel: [ 1.331397] TCP cubic registeredMay 6 13:29:11 x3 kernel: [ 1.331406] NET: Registered protocol family 1May 6 13:29:11 x3 kernel: [ 1.331427] Starting balanced_irqMay 6 13:29:11 x3 kernel: [ 1.331432] Using IPI No-Shortcut modeMay 6 13:29:11 x3 kernel: [ 1.331486] input: AT Translated Set 2 keyboard as /class/input/input1May 6 13:29:11 x3 kernel: [ 1.331560] ACPI: (supports S0 S3 S4 S5)May 6 13:29:11 x3 kernel: [ 1.331605] Magic number: 7:746:482May 6 13:29:11 x3 kernel: [ 1.331875] Freeing unused kernel memory: 328k freedMay 6 13:29:11 x3 kernel: [ 1.335266] Time: tsc clocksource has been installed.May 6 13:29:11 x3 kernel: [ 2.499406] Capability LSM initializedMay 6 13:29:11 x3 kernel: [ 2.528581] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]May 6 13:29:11 x3 kernel: [ 2.528917] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]May 6 13:29:11 x3 kernel: [ 2.529756] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])May 6 13:29:11 x3 kernel: [ 2.529760] ACPI: Processor [CPU0] (supports 8 throttling states)May 6 13:29:11 x3 kernel: [ 2.530255] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]May 6 13:29:11 x3 kernel: [ 2.530497] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]May 6 13:29:11 x3 kernel: [ 2.531362] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])May 6 13:29:11 x3 kernel: [ 2.531368] ACPI: Processor [CPU1] (supports 8 throttling states)May 6 13:29:11 x3 kernel: [ 3.060000] ACPI: Thermal Zone [THM0] (62 C)May 6 13:29:11 x3 kernel: [ 3.064000] ACPI: Thermal Zone [THM1] (60 C)May 6 13:29:11 x3 kernel: [ 3.068000] Time: hpet clocksource has been installed.May 6 13:29:11 x3 kernel: [ 3.396000] SCSI subsystem initializedMay 6 13:29:11 x3 kernel: [ 3.400000] libata version 2.20 loaded.May 6 13:29:11 x3 kernel: [ 3.404000] ahci 0000:00:1f.2: version 2.1May 6 13:29:11 x3 kernel: [ 3.404000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16May 6 13:29:11 x3 kernel: [ 3.416000] usbcore: registered new interface driver usbfsMay 6 13:29:11 x3 kernel: [ 3.416000] usbcore: registered new interface driver hubMay 6 13:29:11 x3 kernel: [ 3.416000] usbcore: registered new device driver usbMay 6 13:29:11 x3 kernel: [ 3.420000] USB Universal Host Controller Interface driver v3.0May 6 13:29:11 x3 kernel: [ 3.420000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPIMay 6 13:29:11 x3 kernel: [ 3.420000] Copyright (c) 1999-2006 Intel Corporation.May 6 13:29:11 x3 kernel: [ 4.408000] PCI: Setting latency timer of device 0000:00:1f.2 to 64May 6 13:29:11 x3 kernel: [ 4.408000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA modeMay 6 13:29:11 x3 kernel: [ 4.408000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part May 6 13:29:11 x3 kernel: [ 4.408000] ata1: SATA max UDMA/133 cmd 0xe0864500 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 13:29:11 x3 kernel: [ 4.408000] ata2: SATA max UDMA/133 cmd 0xe0864580 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 13:29:11 x3 kernel: [ 4.408000] ata3: SATA max UDMA/133 cmd 0xe0864600 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 13:29:11 x3 kernel: [ 4.408000] ata4: SATA max UDMA/133 cmd 0xe0864680 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 13:29:11 x3 kernel: [ 4.408000] scsi0 : ahciMay 6 13:29:11 x3 kernel: [ 4.892000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)May 6 13:29:11 x3 kernel: [ 4.892000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 6 13:29:11 x3 kernel: [ 4.892000] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100May 6 13:29:11 x3 kernel: [ 4.892000] ata1.00: 156301488 sectors, multi 16: LBA48 May 6 13:29:11 x3 kernel: [ 4.892000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 6 13:29:11 x3 kernel: [ 4.892000] ata1.00: configured for UDMA/100May 6 13:29:11 x3 kernel: [ 4.892000] scsi1 : ahciMay 6 13:29:11 x3 kernel: [ 5.204000] ata2: SATA link down (SStatus 0 SControl 0)May 6 13:29:11 x3 kernel: [ 5.204000] scsi2 : ahciMay 6 13:29:11 x3 kernel: [ 5.516000] ata3: SATA link down (SStatus 0 SControl 0)May 6 13:29:11 x3 kernel: [ 5.516000] scsi3 : ahciMay 6 13:29:11 x3 kernel: [ 5.828000] ata4: SATA link down (SStatus 0 SControl 0)May 6 13:29:11 x3 kernel: [ 5.828000] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5May 6 13:29:11 x3 kernel: [ 5.828000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 13:29:11 x3 kernel: [ 5.828000] PCI: Setting latency timer of device 0000:00:1d.0 to 64May 6 13:29:11 x3 kernel: [ 5.828000] uhci_hcd 0000:00:1d.0: UHCI Host ControllerMay 6 13:29:11 x3 kernel: [ 5.828000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1May 6 13:29:11 x3 kernel: [ 5.828000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800May 6 13:29:11 x3 kernel: [ 5.828000] usb usb1: configuration #1 chosen from 1 choiceMay 6 13:29:11 x3 kernel: [ 5.828000] hub 1-0:1.0: USB hub foundMay 6 13:29:11 x3 kernel: [ 5.828000] hub 1-0:1.0: 2 ports detectedMay 6 13:29:11 x3 kernel: [ 5.832000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 6 13:29:11 x3 kernel: [ 5.832000] sda: Write Protect is offMay 6 13:29:11 x3 kernel: [ 5.832000] sda: Mode Sense: 00 3a 00 00May 6 13:29:11 x3 kernel: [ 5.832000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 6 13:29:11 x3 kernel: [ 5.832000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 6 13:29:11 x3 kernel: [ 5.832000] sda: Write Protect is offMay 6 13:29:11 x3 kernel: [ 5.832000] sda: Mode Sense: 00 3a 00 00May 6 13:29:11 x3 kernel: [ 5.832000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 6 13:29:11 x3 kernel: [ 5.832000] sda:<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21May 6 13:29:11 x3 kernel: [ 5.932000] PCI: Setting latency timer of device 0000:00:1d.1 to 64May 6 13:29:11 x3 kernel: [ 5.932000] uhci_hcd 0000:00:1d.1: UHCI Host ControllerMay 6 13:29:11 x3 kernel: [ 5.932000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2May 6 13:29:11 x3 kernel: [ 5.932000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820May 6 13:29:11 x3 kernel: [ 5.932000] usb usb2: configuration #1 chosen from 1 choiceMay 6 13:29:11 x3 kernel: [ 5.932000] hub 2-0:1.0: USB hub foundMay 6 13:29:11 x3 kernel: [ 5.932000] hub 2-0:1.0: 2 ports detectedMay 6 13:29:11 x3 kernel: [ 6.036000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22May 6 13:29:11 x3 kernel: [ 6.036000] PCI: Setting latency timer of device 0000:00:1d.2 to 64May 6 13:29:11 x3 kernel: [ 6.036000] uhci_hcd 0000:00:1d.2: UHCI Host ControllerMay 6 13:29:11 x3 kernel: [ 6.036000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3May 6 13:29:11 x3 kernel: [ 6.036000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840May 6 13:29:11 x3 kernel: [ 6.036000] usb usb3: configuration #1 chosen from 1 choiceMay 6 13:29:11 x3 kernel: [ 6.036000] hub 3-0:1.0: USB hub foundMay 6 13:29:11 x3 kernel: [ 6.036000] hub 3-0:1.0: 2 ports detectedMay 6 13:29:11 x3 kernel: [ 6.140000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23May 6 13:29:11 x3 kernel: [ 6.140000] PCI: Setting latency timer of device 0000:00:1d.3 to 64May 6 13:29:11 x3 kernel: [ 6.140000] uhci_hcd 0000:00:1d.3: UHCI Host ControllerMay 6 13:29:11 x3 kernel: [ 6.140000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4May 6 13:29:11 x3 kernel: [ 6.140000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860May 6 13:29:11 x3 kernel: [ 6.140000] usb usb4: configuration #1 chosen from 1 choiceMay 6 13:29:11 x3 kernel: [ 6.140000] hub 4-0:1.0: USB hub foundMay 6 13:29:11 x3 kernel: [ 6.140000] hub 4-0:1.0: 2 ports detectedMay 6 13:29:11 x3 kernel: [ 6.200000] sda1 sda2 sda3 sda4 < sda5 sda6 >May 6 13:29:11 x3 kernel: [ 6.228000] sd 0:0:0:0: Attached scsi disk sdaMay 6 13:29:11 x3 kernel: [ 6.232000] sd 0:0:0:0: Attached scsi generic sg0 type 0May 6 13:29:11 x3 kernel: [ 6.244000] ata_piix 0000:00:1f.1: version 2.10ac1May 6 13:29:11 x3 kernel: [ 6.244000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16May 6 13:29:11 x3 kernel: [ 6.244000] PCI: Setting latency timer of device 0000:00:1f.1 to 64May 6 13:29:11 x3 kernel: [ 6.244000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14May 6 13:29:11 x3 kernel: [ 6.244000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15May 6 13:29:11 x3 kernel: [ 6.244000] scsi4 : ata_piixMay 6 13:29:11 x3 kernel: [ 6.484000] usb 4-2: new full speed USB device using uhci_hcd and address 2May 6 13:29:11 x3 kernel: [ 6.560000] Attempting manual resumeMay 6 13:29:11 x3 kernel: [ 6.560000] swsusp: Resume From Partition 8:5May 6 13:29:11 x3 kernel: [ 6.560000] PM: Checking swsusp image.May 6 13:29:11 x3 kernel: [ 6.560000] PM: Resume from disk failed.May 6 13:29:11 x3 kernel: [ 6.564000] ata5.00: ATAPI, max UDMA/33May 6 13:29:11 x3 kernel: [ 6.568000] ReiserFS: sda3: found reiserfs format "3.6" with standard journalMay 6 13:29:11 x3 kernel: [ 6.568000] ReiserFS: sda3: using ordered data modeMay 6 13:29:11 x3 kernel: [ 6.584000] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30May 6 13:29:11 x3 kernel: [ 6.584000] ReiserFS: sda3: checking transaction log (sda3)May 6 13:29:11 x3 kernel: [ 6.628000] ReiserFS: sda3: Using r5 hash to sort namesMay 6 13:29:11 x3 kernel: [ 6.660000] usb 4-2: configuration #1 chosen from 1 choiceMay 6 13:29:11 x3 kernel: [ 6.728000] ata5.00: configured for UDMA/33May 6 13:29:11 x3 kernel: [ 6.728000] scsi5 : ata_piixMay 6 13:29:11 x3 kernel: [ 6.728000] ata6: port disabled. ignoring.May 6 13:29:11 x3 kernel: [ 6.732000] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5May 6 13:29:11 x3 kernel: [ 6.732000] scsi 4:0:0:0: Attached scsi generic sg1 type 5May 6 13:29:11 x3 kernel: [ 6.732000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 13:29:11 x3 kernel: [ 6.732000] PCI: Setting latency timer of device 0000:02:00.0 to 64May 6 13:29:11 x3 kernel: [ 6.792000] e1000: 0000:02:00.0: e1000_probe: The EEPROM Checksum Is Not ValidMay 6 13:29:11 x3 kernel: [ 6.812000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 6 13:29:11 x3 kernel: [ 6.812000] e1000: probe of 0000:02:00.0 failed with error -5May 6 13:29:11 x3 kernel: [ 6.812000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23May 6 13:29:11 x3 kernel: [ 6.812000] PCI: Setting latency timer of device 0000:00:1d.7 to 64May 6 13:29:11 x3 kernel: [ 6.812000] ehci_hcd 0000:00:1d.7: EHCI Host ControllerMay 6 13:29:11 x3 kernel: [ 6.812000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5May 6 13:29:11 x3 kernel: [ 6.812000] ehci_hcd 0000:00:1d.7: debug port 1May 6 13:29:11 x3 kernel: [ 6.812000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7May 6 13:29:11 x3 kernel: [ 6.812000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee404000May 6 13:29:11 x3 kernel: [ 6.816000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004May 6 13:29:11 x3 kernel: [ 6.816000] usb usb5: configuration #1 chosen from 1 choiceMay 6 13:29:11 x3 kernel: [ 6.816000] hub 5-0:1.0: USB hub foundMay 6 13:29:11 x3 kernel: [ 6.816000] hub 5-0:1.0: 8 ports detectedMay 6 13:29:11 x3 kernel: [ 7.104000] usb 4-2: USB disconnect, address 2May 6 13:29:11 x3 kernel: [ 7.344000] usb 4-2: new full speed USB device using uhci_hcd and address 3May 6 13:29:11 x3 kernel: [ 7.520000] usb 4-2: configuration #1 chosen from 1 choiceMay 6 13:29:11 x3 kernel: [ 10.496000] usb 5-2: new high speed USB device using ehci_hcd and address 3May 6 13:29:11 x3 kernel: [ 10.696000] usb 5-2: configuration #1 chosen from 1 choiceMay 6 13:29:11 x3 kernel: [ 15.608000] input: PC Speaker as /class/input/input2May 6 13:29:11 x3 kernel: [ 15.624000] Linux agpgart interface v0.102 (c) Dave JonesMay 6 13:29:11 x3 kernel: [ 15.624000] agpgart: Detected an Intel 945GM Chipset.May 6 13:29:11 x3 kernel: [ 15.644000] intel_rng: FWH not detectedMay 6 13:29:11 x3 kernel: [ 15.652000] agpgart: AGP aperture is 256M @ 0x0May 6 13:29:11 x3 kernel: [ 15.656000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5May 6 13:29:11 x3 kernel: [ 15.656000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4May 6 13:29:11 x3 kernel: [ 15.680000] iTCO_vendor_support: vendor-support=0May 6 13:29:11 x3 kernel: [ 15.680000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)May 6 13:29:11 x3 kernel: [ 15.680000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)May 6 13:29:11 x3 kernel: [ 15.680000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)May 6 13:29:11 x3 kernel: [ 15.788000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]May 6 13:29:11 x3 kernel: [ 15.788000] Yenta: Using INTVAL to route CSC interrupts to PCIMay 6 13:29:11 x3 kernel: [ 15.788000] Yenta: Routing CardBus interrupts to PCIMay 6 13:29:11 x3 kernel: [ 15.788000] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64May 6 13:29:11 x3 kernel: [ 15.844000] ieee80211_crypt: registered algorithm 'NULL'May 6 13:29:11 x3 kernel: [ 15.864000] ieee80211: 802.11 data/management/control stack, git-1.1.13May 6 13:29:11 x3 kernel: [ 15.864000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>May 6 13:29:11 x3 kernel: [ 15.904000] irda_init()May 6 13:29:11 x3 kernel: [ 15.904000] NET: Registered protocol family 23May 6 13:29:11 x3 kernel: [ 15.924000] usbcore: registered new interface driver libusualMay 6 13:29:11 x3 kernel: [ 15.932000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpMay 6 13:29:11 x3 kernel: [ 15.932000] ipw3945: Copyright(c) 2003-2006 Intel CorporationMay 6 13:29:11 x3 kernel: [ 15.960000] Initializing USB Mass Storage driver...May 6 13:29:11 x3 kernel: [ 15.960000] scsi6 : SCSI emulation for USB Mass Storage devicesMay 6 13:29:11 x3 kernel: [ 15.960000] usb-storage: device found at 3May 6 13:29:11 x3 kernel: [ 15.960000] usbcore: registered new interface driver usb-storageMay 6 13:29:11 x3 kernel: [ 15.960000] usb-storage: waiting for device to settle before scanningMay 6 13:29:11 x3 kernel: [ 15.960000] USB Mass Storage support registered.May 6 13:29:11 x3 kernel: [ 16.020000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16May 6 13:29:11 x3 kernel: [ 16.020000] Socket status: 30000007May 6 13:29:11 x3 kernel: [ 16.020000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfffMay 6 13:29:11 x3 kernel: [ 16.020000] cs: IO port probe 0xa000-0xdfff: clean.May 6 13:29:11 x3 kernel: [ 16.020000] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffffMay 6 13:29:11 x3 kernel: [ 16.020000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffffMay 6 13:29:11 x3 kernel: [ 16.028000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21May 6 13:29:11 x3 kernel: [ 16.028000] PCI: Setting latency timer of device 0000:03:00.0 to 64May 6 13:29:11 x3 kernel: [ 16.028000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionMay 6 13:29:11 x3 kernel: [ 16.136000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayMay 6 13:29:11 x3 kernel: [ 16.136000] Uniform CD-ROM driver Revision: 3.20May 6 13:29:11 x3 kernel: [ 16.136000] sr 4:0:0:0: Attached scsi CD-ROM sr0May 6 13:29:11 x3 kernel: [ 16.216000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21May 6 13:29:11 x3 kernel: [ 16.216000] PCI: Setting latency timer of device 0000:00:1b.0 to 64May 6 13:29:11 x3 kernel: [ 16.332000] cs: IO port probe 0x100-0x3af: clean.May 6 13:29:11 x3 kernel: [ 16.336000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7May 6 13:29:11 x3 kernel: [ 16.336000] cs: IO port probe 0x820-0x8ff: clean.May 6 13:29:11 x3 kernel: [ 16.336000] cs: IO port probe 0xc00-0xcf7: clean.May 6 13:29:11 x3 kernel: [ 16.340000] cs: IO port probe 0xa00-0xaff: clean.May 6 13:29:11 x3 kernel: [ 16.420000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000May 6 13:29:11 x3 kernel: [ 16.420000] serio: Synaptics pass-through port at isa0060/serio1/input0May 6 13:29:11 x3 kernel: [ 16.468000] input: SynPS/2 Synaptics TouchPad as /class/input/input3May 6 13:29:11 x3 kernel: [ 16.472000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.May 6 13:29:11 x3 kernel: [ 16.472000] nsc-ircc, chip->initMay 6 13:29:11 x3 kernel: [ 16.472000] nsc-ircc, Found chip at base=0x164eMay 6 13:29:11 x3 kernel: [ 16.472000] nsc-ircc, driver loaded (Dag Brattli)May 6 13:29:11 x3 kernel: [ 16.472000] nsc_ircc_open(), can't get iobase of 0x2f8May 6 13:29:11 x3 kernel: [ 16.472000] nsc-ircc, Found chip at base=0x164eMay 6 13:29:11 x3 kernel: [ 16.472000] nsc-ircc, driver loaded (Dag Brattli)May 6 13:29:11 x3 kernel: [ 16.472000] nsc_ircc_open(), can't get iobase of 0x2f8May 6 13:29:11 x3 kernel: [ 16.472000] pnp: Device 00:0a disabled.May 6 13:29:11 x3 kernel: [ 16.740000] fuse init (API version 7.8)May 6 13:29:11 x3 kernel: [ 16.776000] lp: driver loaded but no devices foundMay 6 13:29:11 x3 kernel: [ 16.796000] Adding 1028120k swap on /dev/disk/by-uuid/13472f49-9629-45e1-a0b8-4ff0db443906. Priority:-1 extents:1 across:1028120kMay 6 13:29:11 x3 kernel: [ 17.932000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)May 6 13:29:11 x3 kernel: [ 19.248000] NET: Registered protocol family 17May 6 13:29:11 x3 kernel: [ 20.964000] usb-storage: device scan completeMay 6 13:29:11 x3 kernel: [ 21.092000] scsi 6:0:0:0: Direct-Access SMSC USB 2 HS-CF 1.97 PQ: 0 ANSI: 0May 6 13:29:11 x3 kernel: [ 21.092000] scsi 6:0:0:1: Direct-Access SMSC USB 2 HS-MS 1.97 PQ: 0 ANSI: 0May 6 13:29:11 x3 kernel: [ 21.096000] scsi 6:0:0:2: Direct-Access SMSC USB 2 HS-SM 1.97 PQ: 0 ANSI: 0May 6 13:29:11 x3 kernel: [ 21.108000] scsi 6:0:0:3: Direct-Access SMSC USB 2 HS-SD/MMC 1.97 PQ: 0 ANSI: 0May 6 13:29:11 x3 kernel: [ 21.112000] sd 6:0:0:0: Attached scsi removable disk sdbMay 6 13:29:11 x3 kernel: [ 21.112000] sd 6:0:0:0: Attached scsi generic sg2 type 0May 6 13:29:11 x3 kernel: [ 21.116000] sd 6:0:0:1: Attached scsi removable disk sdcMay 6 13:29:11 x3 kernel: [ 21.116000] sd 6:0:0:1: Attached scsi generic sg3 type 0May 6 13:29:11 x3 kernel: [ 21.116000] sd 6:0:0:2: Attached scsi removable disk sddMay 6 13:29:11 x3 kernel: [ 21.116000] sd 6:0:0:2: Attached scsi generic sg4 type 0May 6 13:29:11 x3 kernel: [ 21.124000] SCSI device sde: 1999872 512-byte hdwr sectors (1024 MB)May 6 13:29:11 x3 kernel: [ 21.124000] sde: Write Protect is offMay 6 13:29:11 x3 kernel: [ 21.124000] sde: Mode Sense: 03 00 00 00May 6 13:29:11 x3 kernel: [ 21.124000] sde: assuming drive cache: write throughMay 6 13:29:11 x3 kernel: [ 21.132000] SCSI device sde: 1999872 512-byte hdwr sectors (1024 MB)May 6 13:29:11 x3 kernel: [ 21.136000] sde: Write Protect is offMay 6 13:29:11 x3 kernel: [ 21.136000] sde: Mode Sense: 03 00 00 00May 6 13:29:11 x3 kernel: [ 21.136000] sde: assuming drive cache: write throughMay 6 13:29:11 x3 kernel: [ 21.136000] sde: sde1May 6 13:29:11 x3 kernel: [ 21.136000] sd 6:0:0:3: Attached scsi removable disk sdeMay 6 13:29:11 x3 kernel: [ 21.136000] sd 6:0:0:3: Attached scsi generic sg5 type 0May 6 13:29:11 x3 kernel: [ 22.132000] IBM TrackPoint firmware: 0x0e, buttons: 3/3May 6 13:29:11 x3 kernel: [ 22.420000] input: TPPS/2 IBM TrackPoint as /class/input/input4May 6 13:29:11 x3 kernel: [ 25.372000] NTFS driver 2.1.28 [Flags: R/O MODULE].May 6 13:29:11 x3 kernel: [ 25.436000] NTFS volume version 3.1.May 6 13:29:11 x3 kernel: [ 30.844000] Using specific hotkey driverMay 6 13:29:11 x3 kernel: [ 30.904000] ACPI: AC Adapter [AC] (on-line)May 6 13:29:11 x3 kernel: [ 30.916000] ACPI: ACPI Dock Station Driver May 6 13:29:11 x3 kernel: [ 31.004000] input: Power Button (FF) as /class/input/input5May 6 13:29:11 x3 kernel: [ 31.004000] ACPI: Power Button (FF) [PWRF]May 6 13:29:11 x3 kernel: [ 31.004000] input: Lid Switch as /class/input/input6May 6 13:29:11 x3 kernel: [ 31.004000] ACPI: Lid Switch [LID]May 6 13:29:11 x3 kernel: [ 31.004000] input: Sleep Button (CM) as /class/input/input7May 6 13:29:11 x3 kernel: [ 31.004000] ACPI: Sleep Button (CM) [SLPB]May 6 13:29:11 x3 kernel: [ 31.076000] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07May 6 13:29:11 x3 kernel: [ 31.076000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13May 6 13:29:11 x3 kernel: [ 31.076000] ibm_acpi: http://ibm-acpi.sf.net/May 6 13:29:11 x3 kernel: [ 31.104000] ACPI: Battery Slot [BAT0] (battery present)May 6 13:29:11 x3 kernel: [ 31.112000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)May 6 13:29:11 x3 kernel: [ 31.112000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)May 6 13:29:11 x3 kernel: [ 31.140000] pcc_acpi: loading...May 6 13:29:13 x3 kernel: [ 33.352000] ttyS1: LSR safety check engaged!May 6 13:29:14 x3 kernel: [ 34.424000] ppdev: user-space parallel port driverMay 6 13:29:15 x3 kernel: [ 34.952000] apm: BIOS not found.May 6 13:29:15 x3 kernel: [ 35.216000] Non-volatile memory driver v1.2May 6 13:29:15 x3 kernel: [ 35.228000] input: /usr/sbin/thinkpad-keys as /class/input/input8May 6 13:29:16 x3 kernel: [ 35.732000] Bluetooth: Core ver 2.11May 6 13:29:16 x3 kernel: [ 35.732000] NET: Registered protocol family 31May 6 13:29:16 x3 kernel: [ 35.732000] Bluetooth: HCI device and connection manager initializedMay 6 13:29:16 x3 kernel: [ 35.732000] Bluetooth: HCI socket layer initializedMay 6 13:29:16 x3 kernel: [ 35.744000] Bluetooth: L2CAP ver 2.8May 6 13:29:16 x3 kernel: [ 35.744000] Bluetooth: L2CAP socket layer initializedMay 6 13:29:16 x3 kernel: [ 35.944000] Bluetooth: RFCOMM socket layer initializedMay 6 13:29:16 x3 kernel: [ 35.944000] Bluetooth: RFCOMM TTY layer initializedMay 6 13:29:16 x3 kernel: [ 35.944000] Bluetooth: RFCOMM ver 1.8May 6 13:29:46 x3 kernel: [ 66.016000] NET: Registered protocol family 10May 6 13:29:46 x3 kernel: [ 66.016000] lo: Disabled Privacy ExtensionsMay 6 13:29:46 x3 kernel: [ 66.016000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 6 13:29:57 x3 kernel: [ 77.396000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes readyMay 6 13:30:14 x3 kernel: [ 94.124000] eth1: no IPv6 routers presentMay 6 13:38:38 x3 kernel: Inspecting /boot/System.map-2.6.20-15-genericMay 6 13:38:38 x3 kernel: Loaded 24975 symbols from /boot/System.map-2.6.20-15-generic.May 6 13:38:38 x3 kernel: Symbols match kernel version 2.6.20.May 6 13:38:38 x3 kernel: No module symbols loaded - kernel modules not enabled. May 6 13:38:38 x3 kernel: [ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-provided physical RAM map:May 6 13:38:38 x3 kernel: [ 0.000000] sanitize startMay 6 13:38:38 x3 kernel: [ 0.000000] sanitize endMay 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() type is E820_RAMMay 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fdd0000 end: 000000001fed0000 type: 1May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() type is E820_RAMMay 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001fed0000 size: 000000000000f000 end: 000000001fedf000 type: 3May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001fedf000 size: 0000000000021000 end: 000000001ff00000 type: 4May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: 00000000f4000000 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fed0000 (usable)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 000000001fed0000 - 000000001fedf000 (ACPI data)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 000000001fedf000 - 000000001ff00000 (ACPI NVS)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)May 6 13:38:38 x3 kernel: [ 0.000000] 0MB HIGHMEM available.May 6 13:38:38 x3 kernel: [ 0.000000] 510MB LOWMEM available.May 6 13:38:38 x3 kernel: [ 0.000000] found SMP MP-table at 000f6810May 6 13:38:38 x3 kernel: [ 0.000000] Entering add_active_range(0, 0, 130768) 0 entries of 256 usedMay 6 13:38:38 x3 kernel: [ 0.000000] Zone PFN ranges:May 6 13:38:38 x3 kernel: [ 0.000000] DMA 0 -> 4096May 6 13:38:38 x3 kernel: [ 0.000000] Normal 4096 -> 130768May 6 13:38:38 x3 kernel: [ 0.000000] HighMem 130768 -> 130768May 6 13:38:38 x3 kernel: [ 0.000000] early_node_map[1] active PFN rangesMay 6 13:38:38 x3 kernel: [ 0.000000] 0: 0 -> 130768May 6 13:38:38 x3 kernel: [ 0.000000] On node 0 totalpages: 130768May 6 13:38:38 x3 kernel: [ 0.000000] DMA zone: 32 pages used for memmapMay 6 13:38:38 x3 kernel: [ 0.000000] DMA zone: 0 pages reservedMay 6 13:38:38 x3 kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0May 6 13:38:38 x3 kernel: [ 0.000000] Normal zone: 989 pages used for memmapMay 6 13:38:38 x3 kernel: [ 0.000000] Normal zone: 125683 pages, LIFO batch:31May 6 13:38:38 x3 kernel: [ 0.000000] HighMem zone: 0 pages used for memmapMay 6 13:38:38 x3 kernel: [ 0.000000] DMI present.May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: RSDP (v002 LENOVO ) @ 0x000f67d0May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: XSDT (v001 LENOVO TP-79 0x00002090 LTP 0x00000000) @ 0x1fed1486May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: FADT (v003 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fed1600May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 MSFT 0x0100000e) @ 0x1fed17b4May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: ECDT (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fededdfMay 6 13:38:38 x3 kernel: [ 0.000000] ACPI: TCPA (v002 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedee31May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: MADT (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedee63May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: MCFG (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedeecbMay 6 13:38:38 x3 kernel: [ 0.000000] ACPI: HPET (v001 LENOVO TP-79 0x00002090 LNVO 0x00000001) @ 0x1fedef07May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: BOOT (v001 LENOVO TP-79 0x00002090 LTP 0x00000001) @ 0x1fedefd8May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef2697May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef28f6May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef299cMay 6 13:38:38 x3 kernel: [ 0.000000] ACPI: SSDT (v001 LENOVO TP-79 0x00002090 INTL 0x20050513) @ 0x1fef2e93May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: DSDT (v001 LENOVO TP-79 0x00002090 MSFT 0x0100000e) @ 0x00000000May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)May 6 13:38:38 x3 kernel: [ 0.000000] Processor #0 6:14 APIC version 20May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)May 6 13:38:38 x3 kernel: [ 0.000000] Processor #1 6:14 APIC version 20May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])May 6 13:38:38 x3 kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: IRQ0 used by override.May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: IRQ2 used by override.May 6 13:38:38 x3 kernel: [ 0.000000] ACPI: IRQ9 used by override.May 6 13:38:38 x3 kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsMay 6 13:38:38 x3 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000May 6 13:38:38 x3 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationMay 6 13:38:38 x3 kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)May 6 13:38:38 x3 kernel: [ 0.000000] Detected 1995.190 MHz processor.May 6 13:38:38 x3 kernel: [ 25.388484] Built 1 zonelists. Total pages: 129747May 6 13:38:38 x3 kernel: [ 25.388487] Kernel command line: root=UUID=749d2629-36cd-4da7-b622-21add63394e3 ro quiet splashMay 6 13:38:38 x3 kernel: [ 25.388623] mapped APIC to ffffd000 (fee00000)May 6 13:38:38 x3 kernel: [ 25.388625] mapped IOAPIC to ffffc000 (fec00000)May 6 13:38:38 x3 kernel: [ 25.388628] Enabling fast FPU save and restore... done.May 6 13:38:38 x3 kernel: [ 25.388630] Enabling unmasked SIMD FPU exception support... done.May 6 13:38:38 x3 kernel: [ 25.388636] Initializing CPU#0May 6 13:38:38 x3 kernel: [ 25.388707] PID hash table entries: 2048 (order: 11, 8192 bytes)May 6 13:38:38 x3 kernel: [ 25.391148] Console: colour VGA+ 80x25May 6 13:38:38 x3 kernel: [ 25.391285] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)May 6 13:38:38 x3 kernel: [ 25.391442] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)May 6 13:38:38 x3 kernel: [ 25.401610] Memory: 507328k/523072k available (1992k kernel code, 15216k reserved, 893k data, 328k init, 0k highmem)May 6 13:38:38 x3 kernel: [ 25.401618] virtual kernel memory layout:May 6 13:38:38 x3 kernel: [ 25.401619] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)May 6 13:38:38 x3 kernel: [ 25.401620] pkmap : 0xff800000 - 0xffc00000 (4096 kB)May 6 13:38:38 x3 kernel: [ 25.401621] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)May 6 13:38:38 x3 kernel: [ 25.401622] lowmem : 0xc0000000 - 0xdfed0000 ( 510 MB)May 6 13:38:38 x3 kernel: [ 25.401623] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)May 6 13:38:38 x3 kernel: [ 25.401624] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)May 6 13:38:38 x3 kernel: [ 25.401625] .text : 0xc0100000 - 0xc02f2264 (1992 kB)May 6 13:38:38 x3 kernel: [ 25.401628] Checking if this processor honours the WP bit even in supervisor mode... Ok.May 6 13:38:38 x3 kernel: [ 25.401778] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0May 6 13:38:38 x3 kernel: [ 25.401782] hpet0: 3 64-bit timers, 14318180 HzMay 6 13:38:38 x3 kernel: [ 25.402787] Using HPET for base-timerMay 6 13:38:38 x3 kernel: [ 25.481738] Calibrating delay using timer specific routine.. 3994.39 BogoMIPS (lpj=7988796)May 6 13:38:38 x3 kernel: [ 25.481772] Security Framework v1.0.0 initializedMay 6 13:38:38 x3 kernel: [ 25.481778] SELinux: Disabled at boot.May 6 13:38:38 x3 kernel: [ 25.481791] Mount-cache hash table entries: 512May 6 13:38:38 x3 kernel: [ 25.481899] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 6 13:38:38 x3 kernel: [ 25.481906] monitor/mwait feature present.May 6 13:38:38 x3 kernel: [ 25.481908] using mwait in idle threads.May 6 13:38:38 x3 kernel: [ 25.481911] CPU: L1 I cache: 32K, L1 D cache: 32KMay 6 13:38:38 x3 kernel: [ 25.481914] CPU: L2 cache: 2048KMay 6 13:38:38 x3 kernel: [ 25.481916] CPU: Physical Processor ID: 0May 6 13:38:38 x3 kernel: [ 25.481917] CPU: Processor Core ID: 0May 6 13:38:38 x3 kernel: [ 25.481919] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 6 13:38:38 x3 kernel: [ 25.481927] Compat vDSO mapped to ffffe000.May 6 13:38:38 x3 kernel: [ 25.481930] Remapping vsyscall page to ffffe000May 6 13:38:38 x3 kernel: [ 25.481940] Checking 'hlt' instruction... OK.May 6 13:38:38 x3 kernel: [ 25.497812] SMP alternatives: switching to UP codeMay 6 13:38:38 x3 kernel: [ 25.498094] Early unpacking initramfs... doneMay 6 13:38:38 x3 kernel: [ 25.782872] ACPI: Core revision 20060707May 6 13:38:38 x3 kernel: [ 25.783071] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.May 6 13:38:38 x3 kernel: [ 25.810470] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 6 13:38:38 x3 kernel: [ 25.810488] SMP alternatives: switching to SMP codeMay 6 13:38:38 x3 kernel: [ 25.810593] Booting processor 1/1 eip 3000May 6 13:38:38 x3 kernel: [ 25.821275] Initializing CPU#1May 6 13:38:38 x3 kernel: [ 25.901791] Calibrating delay using timer specific routine.. 3990.13 BogoMIPS (lpj=7980260)May 6 13:38:38 x3 kernel: [ 25.901797] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000May 6 13:38:38 x3 kernel: [ 25.901802] monitor/mwait feature present.May 6 13:38:38 x3 kernel: [ 25.901805] CPU: L1 I cache: 32K, L1 D cache: 32KMay 6 13:38:38 x3 kernel: [ 25.901806] CPU: L2 cache: 2048KMay 6 13:38:38 x3 kernel: [ 25.901808] CPU: Physical Processor ID: 0May 6 13:38:38 x3 kernel: [ 25.901810] CPU: Processor Core ID: 1May 6 13:38:38 x3 kernel: [ 25.901811] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000May 6 13:38:38 x3 kernel: [ 25.901922] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08May 6 13:38:38 x3 kernel: [ 25.901944] Total of 2 processors activated (7984.52 BogoMIPS).May 6 13:38:38 x3 kernel: [ 25.902140] ENABLING IO-APIC IRQsMay 6 13:38:38 x3 kernel: [ 25.902340] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1May 6 13:38:38 x3 kernel: [ 26.049426] checking TSC synchronization across 2 CPUs: May 6 13:38:38 x3 kernel: [ 0.000001] CPU#0 had -142 usecs TSC skew, fixed it up.May 6 13:38:38 x3 kernel: [ 0.000003] CPU#1 had 142 usecs TSC skew, fixed it up.May 6 13:38:38 x3 kernel: [ 0.003999] Brought up 2 CPUsMay 6 13:38:38 x3 kernel: [ 0.132255] migration_cost=70May 6 13:38:38 x3 kernel: [ 0.132500] Booting paravirtualized kernel on bare hardwareMay 6 13:38:38 x3 kernel: [ 0.132594] Time: 13:38:08 Date: 04/06/107May 6 13:38:38 x3 kernel: [ 0.132621] NET: Registered protocol family 16May 6 13:38:38 x3 kernel: [ 0.132697] EISA bus registeredMay 6 13:38:38 x3 kernel: [ 0.132703] ACPI: bus type pci registeredMay 6 13:38:38 x3 kernel: [ 0.132829] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24May 6 13:38:38 x3 kernel: [ 0.132831] PCI: Using configuration type 1May 6 13:38:38 x3 kernel: [ 0.132833] Setting up standard PCI resourcesMay 6 13:38:38 x3 kernel: [ 0.144259] ACPI: Interpreter enabledMay 6 13:38:38 x3 kernel: [ 0.144261] ACPI: Using IOAPIC for interrupt routingMay 6 13:38:38 x3 kernel: [ 0.145009] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:38:38 x3 kernel: [ 0.145548] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:38:38 x3 kernel: [ 0.146085] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:38:38 x3 kernel: [ 0.146625] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:38:38 x3 kernel: [ 0.147161] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:38:38 x3 kernel: [ 0.147699] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:38:38 x3 kernel: [ 0.148257] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:38:38 x3 kernel: [ 0.148792] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)May 6 13:38:38 x3 kernel: [ 0.149136] ACPI: PCI Root Bridge [PCI0] (0000:00)May 6 13:38:38 x3 kernel: [ 0.149140] PCI: Probing PCI hardware (bus 00)May 6 13:38:38 x3 kernel: [ 0.150887] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCOMay 6 13:38:38 x3 kernel: [ 0.150892] PCI quirk: region 1180-11bf claimed by ICH6 GPIOMay 6 13:38:38 x3 kernel: [ 0.151218] Boot video device is 0000:01:00.0May 6 13:38:38 x3 kernel: [ 0.152186] PCI: Transparent bridge - 0000:00:1e.0May 6 13:38:38 x3 kernel: [ 0.152335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]May 6 13:38:38 x3 kernel: [ 0.157114] ACPI: Power Resource [PUBS] (on)May 6 13:38:38 x3 kernel: [ 0.158140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]May 6 13:38:38 x3 kernel: [ 0.158441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]May 6 13:38:38 x3 kernel: [ 0.158608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]May 6 13:38:38 x3 kernel: [ 0.158774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]May 6 13:38:38 x3 kernel: [ 0.158974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]May 6 13:38:38 x3 kernel: [ 0.159173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]May 6 13:38:38 x3 kernel: [ 0.161060] Linux Plug and Play Support v0.97 (c) Adam BelayMay 6 13:38:38 x3 kernel: [ 0.161070] pnp: PnP ACPI initMay 6 13:38:38 x3 kernel: [ 0.165720] pnp: PnP ACPI: found 12 devicesMay 6 13:38:38 x3 kernel: [ 0.165723] PnPBIOS: Disabled by ACPI PNPMay 6 13:38:38 x3 kernel: [ 0.165762] PCI: Using ACPI for IRQ routingMay 6 13:38:38 x3 kernel: [ 0.165764] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportMay 6 13:38:38 x3 kernel: [ 0.219740] NET: Registered protocol family 8May 6 13:38:38 x3 kernel: [ 0.219742] NET: Registered protocol family 20May 6 13:38:38 x3 kernel: [ 0.220678] PCI: Bridge: 0000:00:01.0May 6 13:38:38 x3 kernel: [ 0.220681] IO window: 2000-2fffMay 6 13:38:38 x3 kernel: [ 0.220685] MEM window: ee100000-ee1fffffMay 6 13:38:38 x3 kernel: [ 0.220688] PREFETCH window: d8000000-dfffffffMay 6 13:38:38 x3 kernel: [ 0.220691] PCI: Bridge: 0000:00:1c.0May 6 13:38:38 x3 kernel: [ 0.220694] IO window: 3000-3fffMay 6 13:38:38 x3 kernel: [ 0.220699] MEM window: ee000000-ee0fffffMay 6 13:38:38 x3 kernel: [ 0.220703] PREFETCH window: disabled.May 6 13:38:38 x3 kernel: [ 0.220709] PCI: Bridge: 0000:00:1c.1May 6 13:38:38 x3 kernel: [ 0.220712] IO window: 4000-5fffMay 6 13:38:38 x3 kernel: [ 0.220717] MEM window: ec000000-edffffffMay 6 13:38:38 x3 kernel: [ 0.220722] PREFETCH window: e4000000-e40fffffMay 6 13:38:38 x3 kernel: [ 0.220728] PCI: Bridge: 0000:00:1c.2May 6 13:38:38 x3 kernel: [ 0.220730] IO window: 6000-7fffMay 6 13:38:38 x3 kernel: [ 0.220736] MEM window: e8000000-e9ffffffMay 6 13:38:38 x3 kernel: [ 0.220740] PREFETCH window: e4100000-e41fffffMay 6 13:38:38 x3 kernel: [ 0.220746] PCI: Bridge: 0000:00:1c.3May 6 13:38:38 x3 kernel: [ 0.220749] IO window: 8000-9fffMay 6 13:38:38 x3 kernel: [ 0.220754] MEM window: ea000000-ebffffffMay 6 13:38:38 x3 kernel: [ 0.220759] PREFETCH window: e4200000-e42fffffMay 6 13:38:38 x3 kernel: [ 0.220766] PCI: Bus 22, cardbus bridge: 0000:15:00.0May 6 13:38:38 x3 kernel: [ 0.220768] IO window: 0000a000-0000a0ffMay 6 13:38:38 x3 kernel: [ 0.220773] IO window: 0000a400-0000a4ffMay 6 13:38:38 x3 kernel: [ 0.220779] PREFETCH window: e0000000-e3ffffffMay 6 13:38:38 x3 kernel: [ 0.220784] MEM window: 30000000-33ffffffMay 6 13:38:38 x3 kernel: [ 0.220789] PCI: Bridge: 0000:00:1e.0May 6 13:38:38 x3 kernel: [ 0.220792] IO window: a000-dfffMay 6 13:38:38 x3 kernel: [ 0.220798] MEM window: e4300000-e7ffffffMay 6 13:38:38 x3 kernel: [ 0.220802] PREFETCH window: e0000000-e3ffffffMay 6 13:38:38 x3 kernel: [ 0.220818] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 13:38:38 x3 kernel: [ 0.220823] PCI: Setting latency timer of device 0000:00:01.0 to 64May 6 13:38:38 x3 kernel: [ 0.220844] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17May 6 13:38:38 x3 kernel: [ 0.220850] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 6 13:38:38 x3 kernel: [ 0.220872] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 18May 6 13:38:38 x3 kernel: [ 0.220877] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 6 13:38:38 x3 kernel: [ 0.220899] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 19May 6 13:38:38 x3 kernel: [ 0.220905] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 6 13:38:38 x3 kernel: [ 0.220927] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 20May 6 13:38:38 x3 kernel: [ 0.220932] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 6 13:38:38 x3 kernel: [ 0.220943] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)May 6 13:38:38 x3 kernel: [ 0.220949] PCI: Setting latency timer of device 0000:00:1e.0 to 64May 6 13:38:38 x3 kernel: [ 0.220966] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 13:38:38 x3 kernel: [ 0.220996] NET: Registered protocol family 2May 6 13:38:38 x3 kernel: [ 0.263890] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)May 6 13:38:38 x3 kernel: [ 0.263957] TCP established hash table entries: 16384 (order: 5, 131072 bytes)May 6 13:38:38 x3 kernel: [ 0.264036] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)May 6 13:38:38 x3 kernel: [ 0.264077] TCP: Hash tables configured (established 16384 bind 8192)May 6 13:38:38 x3 kernel: [ 0.264079] TCP reno registeredMay 6 13:38:38 x3 kernel: [ 0.279933] checking if image is initramfs... it isMay 6 13:38:38 x3 kernel: [ 0.845148] Freeing initrd memory: 6995k freedMay 6 13:38:38 x3 kernel: [ 0.845321] Simple Boot Flag at 0x35 set to 0x1May 6 13:38:38 x3 kernel: [ 0.845736] audit: initializing netlink socket (disabled)May 6 13:38:38 x3 kernel: [ 0.845752] audit(1178458688.556:1): initializedMay 6 13:38:38 x3 kernel: [ 0.845908] VFS: Disk quotas dquot_6.5.1May 6 13:38:38 x3 kernel: [ 0.845926] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)May 6 13:38:38 x3 kernel: [ 0.845971] io scheduler noop registeredMay 6 13:38:38 x3 kernel: [ 0.845973] io scheduler anticipatory registeredMay 6 13:38:38 x3 kernel: [ 0.845975] io scheduler deadline registeredMay 6 13:38:38 x3 kernel: [ 0.845986] io scheduler cfq registered (default)May 6 13:38:38 x3 kernel: [ 0.846217] PCI: Setting latency timer of device 0000:00:01.0 to 64May 6 13:38:38 x3 kernel: [ 0.846248] assign_interrupt_mode Found MSI capabilityMay 6 13:38:38 x3 kernel: [ 0.846251] Allocate Port Service[0000:00:01.0:pcie00]May 6 13:38:38 x3 kernel: [ 0.846326] PCI: Setting latency timer of device 0000:00:1c.0 to 64May 6 13:38:38 x3 kernel: [ 0.846380] assign_interrupt_mode Found MSI capabilityMay 6 13:38:38 x3 kernel: [ 0.846382] Allocate Port Service[0000:00:1c.0:pcie00]May 6 13:38:38 x3 kernel: [ 0.846414] Allocate Port Service[0000:00:1c.0:pcie02]May 6 13:38:38 x3 kernel: [ 0.846523] PCI: Setting latency timer of device 0000:00:1c.1 to 64May 6 13:38:38 x3 kernel: [ 0.846577] assign_interrupt_mode Found MSI capabilityMay 6 13:38:38 x3 kernel: [ 0.846579] Allocate Port Service[0000:00:1c.1:pcie00]May 6 13:38:38 x3 kernel: [ 0.846606] Allocate Port Service[0000:00:1c.1:pcie02]May 6 13:38:38 x3 kernel: [ 0.846716] PCI: Setting latency timer of device 0000:00:1c.2 to 64May 6 13:38:38 x3 kernel: [ 0.846769] assign_interrupt_mode Found MSI capabilityMay 6 13:38:38 x3 kernel: [ 0.846771] Allocate Port Service[0000:00:1c.2:pcie00]May 6 13:38:38 x3 kernel: [ 0.846800] Allocate Port Service[0000:00:1c.2:pcie02]May 6 13:38:38 x3 kernel: [ 0.846912] PCI: Setting latency timer of device 0000:00:1c.3 to 64May 6 13:38:38 x3 kernel: [ 0.846965] assign_interrupt_mode Found MSI capabilityMay 6 13:38:38 x3 kernel: [ 0.846968] Allocate Port Service[0000:00:1c.3:pcie00]May 6 13:38:38 x3 kernel: [ 0.847000] Allocate Port Service[0000:00:1c.3:pcie02]May 6 13:38:38 x3 kernel: [ 0.847159] isapnp: Scanning for PnP cards...May 6 13:38:38 x3 kernel: [ 1.201794] isapnp: No Plug & Play device foundMay 6 13:38:38 x3 kernel: [ 1.221504] Real Time Clock Driver v1.12acMay 6 13:38:38 x3 kernel: [ 1.221556] hpet_resources: 0xfed00000 is busyMay 6 13:38:38 x3 kernel: [ 1.221580] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledMay 6 13:38:38 x3 kernel: [ 1.221784] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550AMay 6 13:38:38 x3 kernel: [ 1.222266] mice: PS/2 mouse device common for all miceMay 6 13:38:38 x3 kernel: [ 1.222746] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeMay 6 13:38:38 x3 kernel: [ 1.222948] input: Macintosh mouse button emulation as /class/input/input0May 6 13:38:38 x3 kernel: [ 1.222977] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2May 6 13:38:38 x3 kernel: [ 1.222981] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxMay 6 13:38:38 x3 kernel: [ 1.223256] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12May 6 13:38:38 x3 kernel: [ 1.233788] serio: i8042 KBD port at 0x60,0x64 irq 1May 6 13:38:38 x3 kernel: [ 1.233791] serio: i8042 AUX port at 0x60,0x64 irq 12May 6 13:38:38 x3 kernel: [ 1.233889] EISA: Probing bus 0 at eisa.0May 6 13:38:38 x3 kernel: [ 1.233897] Cannot allocate resource for EISA slot 1May 6 13:38:38 x3 kernel: [ 1.233901] Cannot allocate resource for EISA slot 2May 6 13:38:38 x3 kernel: [ 1.233903] Cannot allocate resource for EISA slot 3May 6 13:38:38 x3 kernel: [ 1.233905] Cannot allocate resource for EISA slot 4May 6 13:38:38 x3 kernel: [ 1.233907] Cannot allocate resource for EISA slot 5May 6 13:38:38 x3 kernel: [ 1.233909] Cannot allocate resource for EISA slot 6May 6 13:38:38 x3 kernel: [ 1.233911] Cannot allocate resource for EISA slot 7May 6 13:38:38 x3 kernel: [ 1.233913] Cannot allocate resource for EISA slot 8May 6 13:38:38 x3 kernel: [ 1.233915] EISA: Detected 0 cards.May 6 13:38:38 x3 kernel: [ 1.263991] TCP cubic registeredMay 6 13:38:38 x3 kernel: [ 1.264000] NET: Registered protocol family 1May 6 13:38:38 x3 kernel: [ 1.264019] Starting balanced_irqMay 6 13:38:38 x3 kernel: [ 1.264025] Using IPI No-Shortcut modeMay 6 13:38:38 x3 kernel: [ 1.264079] input: AT Translated Set 2 keyboard as /class/input/input1May 6 13:38:38 x3 kernel: [ 1.264150] ACPI: (supports S0 S3 S4 S5)May 6 13:38:38 x3 kernel: [ 1.264195] Magic number: 7:402:634May 6 13:38:38 x3 kernel: [ 1.264248] hash matches device ptycdMay 6 13:38:38 x3 kernel: [ 1.264310] hash matches device 0000:00:1c.1:pcie00May 6 13:38:38 x3 kernel: [ 1.264465] Freeing unused kernel memory: 328k freedMay 6 13:38:38 x3 kernel: [ 1.267303] Time: tsc clocksource has been installed.May 6 13:38:38 x3 kernel: [ 2.439433] Capability LSM initializedMay 6 13:38:38 x3 kernel: [ 2.468874] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]May 6 13:38:38 x3 kernel: [ 2.469210] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]May 6 13:38:38 x3 kernel: [ 2.470031] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])May 6 13:38:38 x3 kernel: [ 2.470036] ACPI: Processor [CPU0] (supports 8 throttling states)May 6 13:38:38 x3 kernel: [ 2.470529] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]May 6 13:38:38 x3 kernel: [ 2.470775] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]May 6 13:38:38 x3 kernel: [ 2.471672] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])May 6 13:38:38 x3 kernel: [ 2.471677] ACPI: Processor [CPU1] (supports 8 throttling states)May 6 13:38:38 x3 kernel: [ 3.000000] ACPI: Thermal Zone [THM0] (65 C)May 6 13:38:38 x3 kernel: [ 3.004000] ACPI: Thermal Zone [THM1] (65 C)May 6 13:38:38 x3 kernel: [ 3.008000] Time: hpet clocksource has been installed.May 6 13:38:38 x3 kernel: [ 3.272000] usbcore: registered new interface driver usbfsMay 6 13:38:38 x3 kernel: [ 3.272000] usbcore: registered new interface driver hubMay 6 13:38:39 x3 kernel: [ 3.272000] usbcore: registered new device driver usbMay 6 13:38:39 x3 kernel: [ 3.272000] USB Universal Host Controller Interface driver v3.0May 6 13:38:39 x3 kernel: [ 3.272000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 13:38:39 x3 kernel: [ 3.272000] PCI: Setting latency timer of device 0000:00:1d.0 to 64May 6 13:38:39 x3 kernel: [ 3.272000] uhci_hcd 0000:00:1d.0: UHCI Host ControllerMay 6 13:38:39 x3 kernel: [ 3.272000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1May 6 13:38:39 x3 kernel: [ 3.272000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800May 6 13:38:39 x3 kernel: [ 3.272000] usb usb1: configuration #1 chosen from 1 choiceMay 6 13:38:39 x3 kernel: [ 3.272000] hub 1-0:1.0: USB hub foundMay 6 13:38:39 x3 kernel: [ 3.272000] hub 1-0:1.0: 2 ports detectedMay 6 13:38:39 x3 kernel: [ 3.320000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPIMay 6 13:38:39 x3 kernel: [ 3.320000] Copyright (c) 1999-2006 Intel Corporation.May 6 13:38:39 x3 kernel: [ 3.324000] SCSI subsystem initializedMay 6 13:38:39 x3 kernel: [ 3.340000] libata version 2.20 loaded.May 6 13:38:39 x3 kernel: [ 3.376000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21May 6 13:38:39 x3 kernel: [ 3.376000] PCI: Setting latency timer of device 0000:00:1d.1 to 64May 6 13:38:39 x3 kernel: [ 3.376000] uhci_hcd 0000:00:1d.1: UHCI Host ControllerMay 6 13:38:39 x3 kernel: [ 3.376000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2May 6 13:38:39 x3 kernel: [ 3.376000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820May 6 13:38:39 x3 kernel: [ 3.376000] usb usb2: configuration #1 chosen from 1 choiceMay 6 13:38:39 x3 kernel: [ 3.376000] hub 2-0:1.0: USB hub foundMay 6 13:38:39 x3 kernel: [ 3.376000] hub 2-0:1.0: 2 ports detectedMay 6 13:38:39 x3 kernel: [ 3.480000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22May 6 13:38:39 x3 kernel: [ 3.480000] PCI: Setting latency timer of device 0000:00:1d.2 to 64May 6 13:38:39 x3 kernel: [ 3.480000] uhci_hcd 0000:00:1d.2: UHCI Host ControllerMay 6 13:38:39 x3 kernel: [ 3.480000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3May 6 13:38:39 x3 kernel: [ 3.480000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840May 6 13:38:39 x3 kernel: [ 3.480000] usb usb3: configuration #1 chosen from 1 choiceMay 6 13:38:39 x3 kernel: [ 3.480000] hub 3-0:1.0: USB hub foundMay 6 13:38:39 x3 kernel: [ 3.480000] hub 3-0:1.0: 2 ports detectedMay 6 13:38:39 x3 kernel: [ 3.584000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23May 6 13:38:39 x3 kernel: [ 3.584000] PCI: Setting latency timer of device 0000:00:1d.3 to 64May 6 13:38:39 x3 kernel: [ 3.584000] uhci_hcd 0000:00:1d.3: UHCI Host ControllerMay 6 13:38:39 x3 kernel: [ 3.584000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4May 6 13:38:39 x3 kernel: [ 3.584000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860May 6 13:38:39 x3 kernel: [ 3.584000] usb usb4: configuration #1 chosen from 1 choiceMay 6 13:38:39 x3 kernel: [ 3.584000] hub 4-0:1.0: USB hub foundMay 6 13:38:39 x3 kernel: [ 3.584000] hub 4-0:1.0: 2 ports detectedMay 6 13:38:39 x3 kernel: [ 3.616000] usb 1-2: new full speed USB device using uhci_hcd and address 2May 6 13:38:39 x3 kernel: [ 3.688000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16May 6 13:38:39 x3 kernel: [ 3.688000] PCI: Setting latency timer of device 0000:02:00.0 to 64May 6 13:38:39 x3 kernel: [ 3.748000] e1000: 0000:02:00.0: e1000_probe: The EEPROM Checksum Is Not ValidMay 6 13:38:39 x3 kernel: [ 3.768000] ACPI: PCI interrupt for device 0000:02:00.0 disabledMay 6 13:38:39 x3 kernel: [ 3.768000] e1000: probe of 0000:02:00.0 failed with error -5May 6 13:38:39 x3 kernel: [ 3.768000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23May 6 13:38:39 x3 kernel: [ 3.768000] PCI: Setting latency timer of device 0000:00:1d.7 to 64May 6 13:38:39 x3 kernel: [ 3.768000] ehci_hcd 0000:00:1d.7: EHCI Host ControllerMay 6 13:38:39 x3 kernel: [ 3.768000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5May 6 13:38:39 x3 kernel: [ 3.768000] ehci_hcd 0000:00:1d.7: debug port 1May 6 13:38:39 x3 kernel: [ 3.768000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7May 6 13:38:39 x3 kernel: [ 3.768000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee404000May 6 13:38:39 x3 kernel: [ 3.772000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004May 6 13:38:39 x3 kernel: [ 3.772000] usb usb5: configuration #1 chosen from 1 choiceMay 6 13:38:39 x3 kernel: [ 3.772000] hub 5-0:1.0: USB hub foundMay 6 13:38:39 x3 kernel: [ 3.772000] hub 5-0:1.0: 8 ports detectedMay 6 13:38:39 x3 kernel: [ 3.776000] usb 1-2: unable to read config index 0 descriptor/startMay 6 13:38:39 x3 kernel: [ 3.776000] usb 1-2: chopping to 0 config(s)May 6 13:38:39 x3 kernel: [ 3.784000] usb 1-2: string descriptor 0 read error: -71May 6 13:38:39 x3 kernel: [ 3.792000] usb 1-2: string descriptor 0 read error: -71May 6 13:38:39 x3 kernel: [ 3.800000] usb 1-2: string descriptor 0 read error: -71May 6 13:38:39 x3 kernel: [ 3.800000] usb 1-2: no configuration chosen from 0 choicesMay 6 13:38:39 x3 kernel: [ 3.800000] usb 1-2: USB disconnect, address 2May 6 13:38:39 x3 kernel: [ 3.876000] ahci 0000:00:1f.2: version 2.1May 6 13:38:39 x3 kernel: [ 3.876000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16May 6 13:38:39 x3 kernel: [ 4.296000] usb 5-2: new high speed USB device using ehci_hcd and address 2May 6 13:38:39 x3 kernel: [ 4.496000] usb 5-2: configuration #1 chosen from 1 choiceMay 6 13:38:39 x3 kernel: [ 4.880000] PCI: Setting latency timer of device 0000:00:1f.2 to 64May 6 13:38:39 x3 kernel: [ 4.880000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA modeMay 6 13:38:39 x3 kernel: [ 4.880000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part May 6 13:38:39 x3 kernel: [ 4.880000] ata1: SATA max UDMA/133 cmd 0xe0880500 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 13:38:39 x3 kernel: [ 4.880000] ata2: SATA max UDMA/133 cmd 0xe0880580 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 13:38:39 x3 kernel: [ 4.880000] ata3: SATA max UDMA/133 cmd 0xe0880600 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 13:38:39 x3 kernel: [ 4.880000] ata4: SATA max UDMA/133 cmd 0xe0880680 ctl 0x00000000 bmdma 0x00000000 irq 16May 6 13:38:39 x3 kernel: [ 4.880000] scsi0 : ahciMay 6 13:38:39 x3 kernel: [ 4.936000] usb 4-2: new full speed USB device using uhci_hcd and address 2May 6 13:38:39 x3 kernel: [ 5.112000] usb 4-2: configuration #1 chosen from 1 choiceMay 6 13:38:39 x3 kernel: [ 5.364000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)May 6 13:38:39 x3 kernel: [ 5.364000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 6 13:38:39 x3 kernel: [ 5.364000] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100May 6 13:38:39 x3 kernel: [ 5.364000] ata1.00: 156301488 sectors, multi 16: LBA48 May 6 13:38:39 x3 kernel: [ 5.364000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488May 6 13:38:39 x3 kernel: [ 5.364000] ata1.00: configured for UDMA/100May 6 13:38:39 x3 kernel: [ 5.364000] scsi1 : ahciMay 6 13:38:39 x3 kernel: [ 5.676000] ata2: SATA link down (SStatus 0 SControl 0)May 6 13:38:39 x3 kernel: [ 5.676000] scsi2 : ahciMay 6 13:38:39 x3 kernel: [ 5.988000] ata3: SATA link down (SStatus 0 SControl 0)May 6 13:38:39 x3 kernel: [ 5.988000] scsi3 : ahciMay 6 13:38:39 x3 kernel: [ 6.300000] ata4: SATA link down (SStatus 0 SControl 0)May 6 13:38:39 x3 kernel: [ 6.300000] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5May 6 13:38:39 x3 kernel: [ 6.304000] ata_piix 0000:00:1f.1: version 2.10ac1May 6 13:38:39 x3 kernel: [ 6.304000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16May 6 13:38:39 x3 kernel: [ 6.304000] PCI: Setting latency timer of device 0000:00:1f.1 to 64May 6 13:38:39 x3 kernel: [ 6.304000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14May 6 13:38:39 x3 kernel: [ 6.304000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15May 6 13:38:39 x3 kernel: [ 6.304000] scsi4 : ata_piixMay 6 13:38:39 x3 kernel: [ 6.312000] usbcore: registered new interface driver libusualMay 6 13:38:39 x3 kernel: [ 6.316000] Initializing USB Mass Storage driver...May 6 13:38:39 x3 kernel: [ 6.316000] scsi6 : SCSI emulation for USB Mass Storage devicesMay 6 13:38:39 x3 kernel: [ 6.316000] usb-storage: device found at 2May 6 13:38:39 x3 kernel: [ 6.316000] usb-storage: waiting for device to settle before scanningMay 6 13:38:39 x3 kernel: [ 6.316000] usbcore: registered new interface driver usb-storageMay 6 13:38:39 x3 kernel: [ 6.316000] USB Mass Storage support registered.May 6 13:38:39 x3 kernel: [ 6.320000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 6 13:38:39 x3 kernel: [ 6.320000] sda: Write Protect is offMay 6 13:38:39 x3 kernel: [ 6.320000] sda: Mode Sense: 00 3a 00 00May 6 13:38:39 x3 kernel: [ 6.320000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 6 13:38:39 x3 kernel: [ 6.324000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)May 6 13:38:39 x3 kernel: [ 6.324000] sda: Write Protect is offMay 6 13:38:39 x3 kernel: [ 6.324000] sda: Mode Sense: 00 3a 00 00May 6 13:38:39 x3 kernel: [ 6.324000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUAMay 6 13:38:39 x3 kernel: [ 6.324000] sda:<6>ata5.00: ATAPI, max UDMA/33May 6 13:38:39 x3 kernel: [ 6.752000] sda1 sda2 sda3 sda4 < sda5 sda6 >May 6 13:38:39 x3 kernel: [ 6.780000] sd 0:0:0:0: Attached scsi disk sdaMay 6 13:38:39 x3 kernel: [ 6.784000] sd 0:0:0:0: Attached scsi generic sg0 type 0May 6 13:38:39 x3 kernel: [ 6.788000] ata5.00: configured for UDMA/33May 6 13:38:39 x3 kernel: [ 6.788000] scsi5 : ata_piixMay 6 13:38:39 x3 kernel: [ 6.788000] ata6: port disabled. ignoring.May 6 13:38:39 x3 kernel: [ 6.792000] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5May 6 13:38:39 x3 kernel: [ 6.792000] scsi 4:0:0:0: Attached scsi generic sg1 type 5May 6 13:38:39 x3 kernel: [ 6.812000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayMay 6 13:38:39 x3 kernel: [ 6.812000] Uniform CD-ROM driver Revision: 3.20May 6 13:38:39 x3 kernel: [ 6.812000] sr 4:0:0:0: Attached scsi CD-ROM sr0May 6 13:38:39 x3 kernel: [ 7.104000] Attempting manual resumeMay 6 13:38:39 x3 kernel: [ 7.104000] swsusp: Resume From Partition 8:5May 6 13:38:39 x3 kernel: [ 7.104000] PM: Checking swsusp image.May 6 13:38:39 x3 kernel: [ 7.104000] PM: Resume from disk failed.May 6 13:38:39 x3 kernel: [ 7.108000] ReiserFS: sda3: found reiserfs format "3.6" with standard journalMay 6 13:38:39 x3 kernel: [ 7.108000] ReiserFS: sda3: using ordered data modeMay 6 13:38:39 x3 kernel: [ 7.124000] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30May 6 13:38:39 x3 kernel: [ 7.124000] ReiserFS: sda3: checking transaction log (sda3)May 6 13:38:39 x3 kernel: [ 7.168000] ReiserFS: sda3: Using r5 hash to sort namesMay 6 13:38:39 x3 kernel: [ 11.320000] usb-storage: device scan completeMay 6 13:38:39 x3 kernel: [ 11.444000] scsi 6:0:0:0: Direct-Access SMSC USB 2 HS-CF 1.97 PQ: 0 ANSI: 0May 6 13:38:39 x3 kernel: [ 11.448000] scsi 6:0:0:1: Direct-Access SMSC USB 2 HS-MS 1.97 PQ: 0 ANSI: 0May 6 13:38:39 x3 kernel: [ 11.452000] scsi 6:0:0:2: Direct-Access SMSC USB 2 HS-SM 1.97 PQ: 0 ANSI: 0May 6 13:38:39 x3 kernel: [ 11.464000] scsi 6:0:0:3: Direct-Access SMSC USB 2 HS-SD/MMC 1.97 PQ: 0 ANSI: 0May 6 13:38:39 x3 kernel: [ 11.468000] sd 6:0:0:0: Attached scsi removable disk sdbMay 6 13:38:39 x3 kernel: [ 11.468000] sd 6:0:0:0: Attached scsi generic sg2 type 0May 6 13:38:39 x3 kernel: [ 11.472000] sd 6:0:0:1: Attached scsi removable disk sdcMay 6 13:38:39 x3 kernel: [ 11.472000] sd 6:0:0:1: Attached scsi generic sg3 type 0May 6 13:38:39 x3 kernel: [ 11.476000] sd 6:0:0:2: Attached scsi removable disk sddMay 6 13:38:39 x3 kernel: [ 11.476000] sd 6:0:0:2: Attached scsi generic sg4 type 0May 6 13:38:39 x3 kernel: [ 11.480000] SCSI device sde: 1999872 512-byte hdwr sectors (1024 MB)May 6 13:38:39 x3 kernel: [ 11.484000] sde: Write Protect is offMay 6 13:38:39 x3 kernel: [ 11.484000] sde: Mode Sense: 03 00 00 00May 6 13:38:39 x3 kernel: [ 11.484000] sde: assuming drive cache: write throughMay 6 13:38:39 x3 kernel: [ 11.488000] SCSI device sde: 1999872 512-byte hdwr sectors (1024 MB)May 6 13:38:39 x3 kernel: [ 11.492000] sde: Write Protect is offMay 6 13:38:39 x3 kernel: [ 11.492000] sde: Mode Sense: 03 00 00 00May 6 13:38:39 x3 kernel: [ 11.492000] sde: assuming drive cache: write throughMay 6 13:38:39 x3 kernel: [ 11.492000] sde: sde1May 6 13:38:39 x3 kernel: [ 11.492000] sd 6:0:0:3: Attached scsi removable disk sdeMay 6 13:38:39 x3 kernel: [ 11.492000] sd 6:0:0:3: Attached scsi generic sg5 type 0May 6 13:38:39 x3 kernel: [ 15.924000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5May 6 13:38:39 x3 kernel: [ 15.928000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4May 6 13:38:39 x3 kernel: [ 16.124000] Linux agpgart interface v0.102 (c) Dave JonesMay 6 13:38:39 x3 kernel: [ 16.200000] agpgart: Detected an Intel 945GM Chipset.May 6 13:38:39 x3 kernel: [ 16.216000] agpgart: AGP aperture is 256M @ 0x0May 6 13:38:39 x3 kernel: [ 16.268000] intel_rng: FWH not detectedMay 6 13:38:39 x3 kernel: [ 16.280000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]May 6 13:38:39 x3 kernel: [ 16.280000] Yenta: Using INTVAL to route CSC interrupts to PCIMay 6 13:38:39 x3 kernel: [ 16.280000] Yenta: Routing CardBus interrupts to PCIMay 6 13:38:39 x3 kernel: [ 16.280000] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64May 6 13:38:39 x3 kernel: [ 16.292000] ieee80211_crypt: registered algorithm 'NULL'May 6 13:38:39 x3 kernel: [ 16.300000] ieee80211: 802.11 data/management/control stack, git-1.1.13May 6 13:38:39 x3 kernel: [ 16.300000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>May 6 13:38:39 x3 kernel: [ 16.396000] input: PC Speaker as /class/input/input2May 6 13:38:39 x3 kernel: [ 16.440000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mpMay 6 13:38:39 x3 kernel: [ 16.440000] ipw3945: Copyright(c) 2003-2006 Intel CorporationMay 6 13:38:39 x3 kernel: [ 16.488000] irda_init()May 6 13:38:39 x3 kernel: [ 16.488000] NET: Registered protocol family 23May 6 13:38:39 x3 kernel: [ 16.512000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16May 6 13:38:39 x3 kernel: [ 16.512000] Socket status: 30000007May 6 13:38:39 x3 kernel: [ 16.512000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfffMay 6 13:38:39 x3 kernel: [ 16.512000] cs: IO port probe 0xa000-0xdfff: clean.May 6 13:38:39 x3 kernel: [ 16.512000] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffffMay 6 13:38:39 x3 kernel: [ 16.512000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffffMay 6 13:38:39 x3 kernel: [ 16.512000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 21May 6 13:38:39 x3 kernel: [ 16.512000] PCI: Setting latency timer of device 0000:03:00.0 to 64May 6 13:38:39 x3 kernel: [ 16.512000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionMay 6 13:38:39 x3 kernel: [ 16.512000] iTCO_vendor_support: vendor-support=0May 6 13:38:39 x3 kernel: [ 16.552000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)May 6 13:38:39 x3 kernel: [ 16.740000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21May 6 13:38:39 x3 kernel: [ 16.740000] PCI: Setting latency timer of device 0000:00:1b.0 to 64May 6 13:38:39 x3 kernel: [ 16.872000] cs: IO port probe 0x100-0x3af: clean.May 6 13:38:39 x3 kernel: [ 16.876000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7May 6 13:38:39 x3 kernel: [ 16.876000] cs: IO port probe 0x820-0x8ff: clean.May 6 13:38:39 x3 kernel: [ 16.876000] cs: IO port probe 0xc00-0xcf7: clean.May 6 13:38:39 x3 kernel: [ 16.876000] cs: IO port probe 0xa00-0xaff: clean.May 6 13:38:39 x3 kernel: [ 16.888000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000May 6 13:38:39 x3 kernel: [ 16.888000] serio: Synaptics pass-through port at isa0060/serio1/input0May 6 13:38:39 x3 kernel: [ 16.936000] input: SynPS/2 Synaptics TouchPad as /class/input/input3May 6 13:38:39 x3 kernel: [ 16.940000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.May 6 13:38:39 x3 kernel: [ 16.940000] nsc-ircc, chip->initMay 6 13:38:39 x3 kernel: [ 16.940000] nsc-ircc, Found chip at base=0x164eMay 6 13:38:39 x3 kernel: [ 16.940000] nsc-ircc, driver loaded (Dag Brattli)May 6 13:38:39 x3 kernel: [ 16.940000] nsc_ircc_open(), can't get iobase of 0x2f8May 6 13:38:39 x3 kernel: [ 16.940000] nsc-ircc, Found chip at base=0x164eMay 6 13:38:39 x3 kernel: [ 16.940000] nsc-ircc, driver loaded (Dag Brattli)May 6 13:38:39 x3 kernel: [ 16.940000] nsc_ircc_open(), can't get iobase of 0x2f8May 6 13:38:39 x3 kernel: [ 16.940000] pnp: Device 00:0a disabled.May 6 13:38:39 x3 kernel: [ 16.940000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)May 6 13:38:39 x3 kernel: [ 16.940000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)May 6 13:38:39 x3 kernel: [ 17.192000] fuse init (API version 7.8)May 6 13:38:39 x3 kernel: [ 17.228000] lp: driver loaded but no devices foundMay 6 13:38:39 x3 kernel: [ 17.248000] Adding 1028120k swap on /dev/disk/by-uuid/13472f49-9629-45e1-a0b8-4ff0db443906. Priority:-1 extents:1 across:1028120kMay 6 13:38:39 x3 kernel: [ 18.368000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)May 6 13:38:39 x3 kernel: [ 19.684000] NET: Registered protocol family 17May 6 13:38:39 x3 kernel: [ 22.652000] IBM TrackPoint firmware: 0x0e, buttons: 3/3May 6 13:38:39 x3 kernel: [ 22.936000] input: TPPS/2 IBM TrackPoint as /class/input/input4May 6 13:38:39 x3 kernel: [ 25.876000] NTFS driver 2.1.28 [Flags: R/O MODULE].May 6 13:38:39 x3 kernel: [ 25.948000] NTFS volume version 3.1.May 6 13:38:39 x3 kernel: [ 31.368000] Using specific hotkey driverMay 6 13:38:39 x3 kernel: [ 31.432000] ACPI: AC Adapter [AC] (on-line)May 6 13:38:39 x3 kernel: [ 31.440000] ACPI: ACPI Dock Station Driver May 6 13:38:39 x3 kernel: [ 31.508000] input: Power Button (FF) as /class/input/input5May 6 13:38:39 x3 kernel: [ 31.508000] ACPI: Power Button (FF) [PWRF]May 6 13:38:39 x3 kernel: [ 31.508000] input: Lid Switch as /class/input/input6May 6 13:38:39 x3 kernel: [ 31.508000] ACPI: Lid Switch [LID]May 6 13:38:39 x3 kernel: [ 31.508000] input: Sleep Button (CM) as /class/input/input7May 6 13:38:39 x3 kernel: [ 31.508000] ACPI: Sleep Button (CM) [SLPB]May 6 13:38:39 x3 kernel: [ 31.580000] ibm_acpi: ThinkPad EC firmware 79HT50WW-1.07May 6 13:38:39 x3 kernel: [ 31.580000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13May 6 13:38:39 x3 kernel: [ 31.580000] ibm_acpi: http://ibm-acpi.sf.net/May 6 13:38:39 x3 kernel: [ 31.604000] ACPI: Battery Slot [BAT0] (battery present)May 6 13:38:39 x3 kernel: [ 31.616000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)May 6 13:38:39 x3 kernel: [ 31.616000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)May 6 13:38:39 x3 kernel: [ 31.648000] pcc_acpi: loading...May 6 13:38:40 x3 kernel: [ 33.872000] ttyS1: LSR safety check engaged!May 6 13:38:41 x3 kernel: [ 34.980000] ppdev: user-space parallel port driverMay 6 13:38:42 x3 kernel: [ 35.564000] apm: BIOS not found.May 6 13:38:42 x3 kernel: [ 35.876000] Non-volatile memory driver v1.2May 6 13:38:42 x3 kernel: [ 35.896000] input: /usr/sbin/thinkpad-keys as /class/input/input8May 6 13:38:43 x3 kernel: [ 36.344000] Bluetooth: Core ver 2.11May 6 13:38:43 x3 kernel: [ 36.344000] NET: Registered protocol family 31May 6 13:38:43 x3 kernel: [ 36.344000] Bluetooth: HCI device and connection manager initializedMay 6 13:38:43 x3 kernel: [ 36.344000] Bluetooth: HCI socket layer initializedMay 6 13:38:43 x3 kernel: [ 36.384000] Bluetooth: L2CAP ver 2.8May 6 13:38:43 x3 kernel: [ 36.384000] Bluetooth: L2CAP socket layer initializedMay 6 13:38:43 x3 kernel: [ 36.548000] Bluetooth: RFCOMM socket layer initializedMay 6 13:38:43 x3 kernel: [ 36.548000] Bluetooth: RFCOMM TTY layer initializedMay 6 13:38:43 x3 kernel: [ 36.548000] Bluetooth: RFCOMM ver 1.8May 6 13:39:25 x3 kernel: [ 78.904000] NET: Registered protocol family 10May 6 13:39:25 x3 kernel: [ 78.904000] lo: Disabled Privacy ExtensionsMay 6 13:39:25 x3 kernel: [ 78.904000] ADDRCONF(NETDEV_UP): eth1: link is not readyMay 6 13:41:10 x3 kernel: [ 183.360000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes readyMay 6 13:41:25 x3 kernel: [ 197.860000] eth1: no IPv6 routers presentMay 6 16:38:47 x3 kernel: [10839.120000] usb 5-2: USB disconnect, address 2