(**) I810(0): Depth 24, (--) framebuffer bpp 32
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(**) I810(0): Option "NoAccel" "false"
(**) I810(0): Option "DRI" "true"
(**) I810(0): Option "DevicePresence" "true"
(**) I810(0): Option "MonitorLayout" "CRT,LFP"
(**) I810(0): Option "Clone" "true"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) I810(0): Chipset: "915GM"
(--) I810(0): Linear framebuffer at 0xC0000000
(--) I810(0): IO registers at addr 0xDFF00000
(II) I810(0): 2 display pipes available.
(II) I810(0): detected 7932 kB stolen memory.
(II) I810(0): Kernel reported 110336 total, 1 used
(II) I810(0): I830CheckAvailableMemory: 441340 kB available
(II) I810(0): Will try to reserve 32768 kiB of AGP aperture space
for the DRM memory manager.
(II) I810(0): Enabling Clone Mode
(II) I810(0): Monitoring connected displays enabled
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 12288 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): BIOS now sees 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 7932 kByte
(**) I810(0): VideoRAM: 131072 kByte
(==) I810(0): video overlay key set to 0x101fe
(**) I810(0): page flipping disabled
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): BIOS Build: 1219
(**) I810(0): Device Presence: enabled.
(II) I810(0): Display Presence: CRT: attached: FALSE, encoder: TRUE
(II) I810(0): Display Presence: TV: attached: FALSE, encoder: TRUE
(II) I810(0): Display Presence: DFP (digital flat panel): attached: FALSE, encoder: FALSE
(II) I810(0): Display Presence: LFP (local flat panel): attached: TRUE, encoder: TRUE
(II) I810(0): Display Presence: Second (second CRT): attached: FALSE, encoder: FALSE
(II) I810(0): Display Presence: TV2 (second TV): attached: FALSE, encoder: FALSE
(II) I810(0): Display Presence: DFP2 (second digital flat panel): attached: FALSE, encoder: FALSE
(II) I810(0): Display Presence: LFP2 (second local flat panel): attached: FALSE, encoder: FALSE
(==) I810(0): Display Info: enabled.
(II) I810(0): Broken BIOSes cause the system to hang here.
If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
(II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: TV: attached: FALSE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1280,800)
(II) I810(0): Display Info: Second (second CRT): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: DFP2 (second digital flat panel): attached: FALSE, present: FALSE, size: (0,20
59)
(II) I810(0): Display Info: LFP2 (second local flat panel): attached: FALSE, present: FALSE, size: (0,2059
)
(II) I810(0): Size of device LFP (local flat panel) is 1280 x 800
(II) I810(0): Currently active displays on Pipe A:
(II) I810(0): CRT
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1280 x 800
(==) I810(0): Display is using Pipe B
(--) I810(0): Maximum frambuffer space: 130904 kByte
(II) I810(0): VESA VBE PanelID read successfully
(II) I810(0): PanelID returned panel resolution : 1280x800
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: CPT Model: 13a6 Serial#: 0
(II) I810(0): Year: 2006 Week: 1
(II) I810(0): EDID Version: 1.3
(II) I810(0): Digital Display Input
(II) I810(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) I810(0): Gamma: 2.20
(II) I810(0): No DPMS capabilities specified; RGB/Color Display
(II) I810(0): First detailed timing is preferred mode
(II) I810(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
(II) I810(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) I810(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) I810(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) I810(0): JD5591154WA4
(II) I810(0): <EF><DF><U+03FF><9F>pP
(II) I810(0): EDID (in hex):
(II) I810(0): 00ffffffffffff000e14a61300000000
(II) I810(0): 01100103802115780a806d99574f8f26
(II) I810(0): 21505400000001010101010101010101
(II) I810(0): 010101010101ea1a0080502010301520
(II) I810(0): 13004bcf100000190000000f00000000
(II) I810(0): 0000000000206e050f00000000fe004a
(II) I810(0): 44353539313135345741340a000000fe
(II) I810(0): 00efdfcfbf9f70500001010a202000e3
(II) I810(0): Printing DDC gathered Modelines:
(II) I810(0): Modeline "1280x800" 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync
(--) I810(0): A non-CRT device is attached to pipe B.
No refresh rate overrides will be attempted.
(--) I810(0): Maximum space available for video modes: 12288 kByte