Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (797.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 535560192 (510 MB)
avail memory = 514662400 (490 MB)
pnpbios: Bad PnP BIOS data checksum
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL MUMMY> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82810E (i810E GMCH) SVGA controller> mem 0xf8000000-0xfbffffff,0xffa80000-0xffafffff irq 11 at device 1.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xd800-0xd8ff mem 0xff8ffc00-0xff8ffcff irq 3 at device 10.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:05:33:73:97
pci1: <multimedia, audio> at device 11.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 9 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub1: vendor 0x0451 product 0x2046, class 9/0, rev 1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, self powered
umass0: SanDisk Corporation Cruzer Micro, rev 2.00/0.10, addr 3
ukbd0: Key Tronic Keytronic USB Keyboard, rev 1.10/1.02, addr 4, iclass 3/1
kbd2 at ukbd0
Timecounter "TSC" frequency 797415168 Hz quality 800
Timecounters tick every 1.000 msec
ad0: DMA limited to UDMA33, controller found non-ATA66 cable
ad0: 19073MB <Maxtor 32049H2 YAH814Y0> at ata0-master UDMA33
ad1: DMA limited to UDMA33, controller found non-ATA66 cable
ad1: 114473MB <Seagate ST3120814A 3.AAJ> at ata0-slave UDMA33
acd0: CDRW <LG CD-RW CED-8080B/1.04> at ata1-master PIO4
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk Cruzer Micro 0.1> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 1953MB (4001760 512 byte sectors: 255H 63S/T 249C)
Trying to mount root from ufs:/dev/ad0s1a
rl0: link state changed to UP
agp0: binding memory at bad offset 0x4000000
agp0: binding memory at bad offset 0x4000000
agp0: binding memory at bad offset 0x4000000
audigyls0: <AudigyLS> port 0xdf80-0xdf9f irq 9 at device 11.0 on pci1