rendered paste bodyCopyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #1: Fri May 4 20:13:42 CEST 2007
root@:/usr/obj/usr/src/sys/MYKERNEL
ACPI APIC Table: <FSC APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 1072562176 (1022 MB)
avail memory = 1040568320 (992 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD XSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5750 A1, ASIC rev. 0x4001> mem 0xf3000000-0xf300ffff irq 16 at device 0.0 on pci5
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:30:05:a1:fd:d3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci7: <ACPI PCI bus> on pcib4
uhci0: <UHCI (generic) USB controller> port 0x2000-0x201f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x2400-0x241f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x2800-0x281f irq 21 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x2c00-0x2c1f irq 20 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf0000000-0xf00003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: vendor 0x0bf8 product 0x100f, rev 2.00/1.00, addr 2
umass0: Genesys USB 2.0 Card, rev 2.00/91.44, addr 3
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib5
fwohci0: <Lucent FW322/323> mem 0xf3114000-0xf3114fff irq 20 at device 6.0 on pci9
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:30:05:31:00:0f:b8:91
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:05:0f:b8:91
fwe0: Ethernet address: 02:30:05:0f:b8:91
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci9: <multimedia, audio> at device 9.0 (no driver attached)
pci9: <input device> at device 9.1 (no driver attached)
fwohci1: <1394 Open Host Controller Interface> mem 0xf3115000-0xf31157ff,0xf3110000-0xf3113fff irq 19 at device 9.2 on pci9
fwohci1: OHCI version 1.10 (ROM=0)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:02:3c:01:51:13:b6:d3
fwohci1: Phy 1394a available S400, 2 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwe1: <Ethernet over FireWire> on firewire1
if_fwe1: Fake Ethernet address: 02:02:3c:13:b6:d3
fwe1: Ethernet address: 02:02:3c:13:b6:d3
fwe1: if_start running deferred for Giant
sbp1: <SBP-2/SCSI over FireWire> on firewire1
fwohci1: Initiate bus reset
fwohci1: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire1: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire1: bus manager 0 (me)
pci9: <simple comms> at device 11.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3400-0x340f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0x3430-0x3437,0x3424-0x3427,0x3428-0x342f,0x3420-0x3423,0x3410-0x341f mem 0xf0000400-0xf00007ff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ukbd0: vendor 0x1267 product 0x0103, rev 1.10/1.01, addr 2, iclass 3/1
kbd2 at ukbd0
uhid0: vendor 0x1267 product 0x0103, rev 1.10/1.01, addr 2, iclass 3/1
ums0: vendor 0x0461 product 0x4d03, rev 1.00/5.50, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 3192094472 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <NEC DVD RW ND-3530A/1.80> at ata0-master UDMA33
ad4: 238475MB <SAMSUNG SP2504C VT100-41> at ata2-master SATA150
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic STORAGE DEVICE 9144> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic STORAGE DEVICE 9144> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic STORAGE DEVICE 9144> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic STORAGE DEVICE 9144> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da4 at umass-sim0 bus 0 target 0 lun 4
da4: <Generic STORAGE DEVICE 9144> Removable Direct Access SCSI-0 device
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da4:umass-sim0:0:0:4): READ CAPACITY. CDB: 25 80 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:4): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:4): SCSI Status: Check Condition
(da4:umass-sim0:0:0:4): NOT READY asc:3a,0
(da4:umass-sim0:0:0:4): Medium not present
(da4:umass-sim0:0:0:4): Unretryable error
Opened disk da4 -> 6
(da4:umass-sim0:0:0:4): READ CAPACITY. CDB: 25 80 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:4): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:4): SCSI Status: Check Condition
(da4:umass-sim0:0:0:4): NOT READY asc:3a,0
(da4:umass-sim0:0:0:4): Medium not present
(da4:umass-sim0:0:0:4): Unretryable error
Opened disk da4 -> 6
(da4:umass-sim0:0:0:4): READ CAPACITY. CDB: 25 80 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:4): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:4): SCSI Status: Check Condition
(da4:umass-sim0:0:0:4): NOT READY asc:3a,0
(da4:umass-sim0:0:0:4): Medium not present
(da4:umass-sim0:0:0:4): Unretryable error
Opened disk da4 -> 6
Trying to mount root from ufs:/dev/ad4s1a