Miscellany

AVM_Ar7 >go
AVM decompress Kernel:
.............done
start kernel
[ar7_pre_init] PERIPHERAL Clk = 62500000 Hz baud=102

LINUX started...
[ar7_setup]
[ar7_serial_init]
[ar7_serial_init] done
Linux version 2.6.13.1-ar7 (oliver@oliver-desktop) (gcc version 3.4.5) #1 Tue Ma
y 1 13:48:24 CEST 2007
memsize=32 MByte
flashsize=4 MByte
&_end=0x9421f774 PFN_ALIGN(&_end)=0x94220000 CPHYSADDR(PFN_ALIGN(&_end))=0x14220
000 memsize=0x2000000
CPU revision is: 00018448
[ar7_clk_init]: dsl xtal 25000000Hz lan xtal 25000000Hz
[ar7_gpio_init]
Determined physical RAM map:
 memory: 00220000 @ 14000000 (reserved)
 memory: 01de0000 @ 14220000 (usable)
On node 0 totalpages: 8192
[alloc_node_mem_map] reduce size from 2883616 Bytes to  262176 Bytes
[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x94223000-0x942630
20
[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93fa3000-0x94263020
zone=0 zone_size[j]=0x90112
realsize=8192
  DMA zone: 8192 pages, LIFO batch:3
zone=1 zone_size[j]=0x0
realsize=0
  Normal zone: 0 pages, LIFO batch:1
zone=2 zone_size[j]=0x0
realsize=0
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: mini_fo=tmpfs  console=ttyS0,38400n8r
[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE   + 0x100), &except_vec2_generic, 0x30)
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions). Base=0x941f47ac
TLB synthesizer field overflow (simm)
Synthesized TLB load handler fastpath (34 instructions) Base=0x941f7580.
TLB synthesizer field overflow (simm)
Synthesized TLB store handler fastpath (34 instructions) Base=0x941f7780.
TLB synthesizer field overflow (simm)
Synthesized TLB modify handler fastpath (33 instructions) Base=0x941f7980.
PID hash table entries: 256 (order: 8, 4096 bytes)
CPU frequency 150.00 MHz
Using 75.000 MHz high precision timer.
[setup_irq]: irq 127 irqaction->handler 0x94041a70 (no_action+0x0/0x8 )
[register_console] enable commandline console 0
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30208k/30592k available (1536k kernel code, 320k reserved, 355k data, 11
2k init, 0k highmem)
totalram_pages= 7568
Calibrating delay loop... 149.50 BogoMIPS (lpj=747520)
loops_per_jiffy=747520
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
NET: Registered protocol family 16
Can't analyze prologue code at 9417e920
Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher
Initializing Cryptographic API
[avm_power]Sangam 7300 or 7300A (> 2.3 but not 5.7 possible overclock) detected
rev=57
[avm] configured: watchdog eventled enable direct gpio

AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: May  1 2007 13:48:
00)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
[uart_add_one_port]
ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART
[uart_add_one_port] dont register console port->type = 16
port->cons = 0x941b9a90 port->cons->flags = 0x7
[uart_add_one_port] success
io scheduler noop registered
[cpmac] cpmac_if_register, dev eth0 (phy_id 0) registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
physmap flash device: 400000 at 10000000
[mtd_do_chip_probe] map 941bb260
[genprobe_ident_chips] map name phys_mapped_flash
[genprobe_new_chip] map 0x941bb260 map->size 0x400000 map->name phys_mapped_flas
h
[genprobe_new_chip] min_chips 1 max_chips 2
[genprobe_new_chip] cfi->interleave 1
[genprobe_new_chip] map_bankwidth 2 type 2
[genprobe_new_chip] call probe_chip
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
[genprobe_ident_chips] cfi.cfiq->DevSize 22
[genprobe_ident_chips] 3 cfi.numchips 1 max_chips 1
[genprobe_ident_chips] 4 i 0 j 0
[genprobe_ident_chips] 5 i 0 j 1
[mtd_do_chip_probe] check_cmd_set
 Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
Generic platform RAM MTD, (c) 2004 Simtec Electronics
Ohio flash driver (size->0x400000 mem->0x10000000)
flash_size=0x400000
[mtd_do_chip_probe] map 941bb364
[genprobe_ident_chips] map name AR7 flash memory
[genprobe_new_chip] map 0x941bb364 map->size 0x400000 map->name AR7 flash memory
[genprobe_new_chip] min_chips 1 max_chips 2
[genprobe_new_chip] cfi->interleave 1
[genprobe_new_chip] map_bankwidth 2 type 2
[genprobe_new_chip] call probe_chip
AR7 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
[genprobe_ident_chips] cfi.cfiq->DevSize 22
[genprobe_ident_chips] 3 cfi.numchips 1 max_chips 1
[genprobe_ident_chips] 4 i 0 j 0
[genprobe_ident_chips] 5 i 0 j 1
[mtd_do_chip_probe] check_cmd_set
 Amd/Fujitsu Extended Query Table at 0x0040
AR7 flash memory: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
[mtd]: jffs2_size = 6 * 64KByte (0x60000 Bytes)
ohio_flash_map.virt 0xb0000000
ohio_ram_map.virt 0x00000000
[ohio_find_hidden_filesystem] start=0x10000 end=0x3c0000 size=0x3b0000
[ohio_find_hidden_filesystem] start_virt=0xb0000000
[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x2af01b/2813979
[init_ohio_flash] find hidden filesystem size=0x30f200 offset=0xb0e00
[mtd] configure jffs2 partition
[mtd] fs_size=0x350000 max=0x60000 is=0x60000 max jffs2_size value 6
[mtd] ohio_flash_map: name=AR7 flash memory bankwidth=2 virt=0xb0000000 phys=0x1
0000000 size=0x400000
partition_info[0]: name=filesystem offset=b0e00 size=30f200
partition_info[1]: name=kernel offset=10000 size=3b0000
partition_info[2]: name=bootloader offset=0 size=10000
partition_info[3]: name=tffs (1) offset=3c0000 size=20000
partition_info[4]: name=tffs (2) offset=3e0000 size=20000
partition_info[5]: name=jffs2 offset=360000 size=60000
partition_info[6]: name=Kernel without jffs2 offset=10000 size=350000
Creating 7 MTD partitions on "AR7 flash memory":
0x000b0e00-0x003c0000 : "filesystem"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
mtd: partition "filesystem" doesn't start on an erase block boundary -- force re
ad-only
0x00010000-0x003c0000 : "kernel"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
0x00000000-0x00010000 : "bootloader"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
        'Virtual blocks not allowed'
0x003c0000-0x003e0000 : "tffs (1)"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
        'Virtual blocks not allowed'
0x003e0000-0x00400000 : "tffs (2)"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
        'Virtual blocks not allowed'
0x00360000-0x003c0000 : "jffs2"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
        'Virtual blocks not allowed'
0x00010000-0x00360000 : "Kernel without jffs2"
        'nor-flash'
        'Bits can be cleared (flash)'
        'Has an erase function'
        'Virtual blocks not allowed'
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
mcfw: IGMPv3 fast forwarding
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
[setup_irq]: irq 1 irqaction->handler 0x94001590 (dummy_timer_irq+0x0/0x14 )
[setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x1c )
[ar7_late_init]
[tffs] alloc_chrdev_region() param=mtd4
[tffs] CONFIG_TFFS_MTD_DEVICE_0=4 CONFIG_TFFS_MTD_DEVICE_1=5
[tffs] Character device init successfull
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
      mount on mtd4 and mtd5 (double buffering)
Adam2 environment variables API installed.
[prepare_namespace] new mount root /dev/mtdblock1
tffsd: wait for events
use lzma compression
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 112k freed (7596 free)
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
init started:  BusyBox v1.4.1 (2007-04-27 23:13:49 CEST) multi-call binary
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
+ start
+ ps
+ grep inotifywait
+ grep -v grep
+ echo starting inotifywait
starting inotifywait
+ sleep 3
/etc/init.d/rc.mini_fo: /etc/init.d/rc.mini_fo: 1: cannot create /var/iw.log: Re
ad-only file system
+ inotifywait -c -r -m / @/dev @/proc @/var @/rom @/sto --exclude busybox|uClibc
|libcrypt-0
+ mounted_proc=0
+ [ ! -e /proc/mounts ]
+ echo *** Mounting proc-fs. ***
*** Mounting proc-fs. ***
+ mount proc
+ mounted_proc=1
+ grep / mini_fo /proc/mounts
+ echo *** Switching to mini_fo-root ... ***
*** Switching to mini_fo-root ... ***
+ set -e
+ modprobe mini_fo
Registering mini_fo version $Id$
+ grep mini_fo=jffs2 /proc/sys/urlader/environment
TFFS Name Table 9
+ mount -t tmpfs none /data
+ mount -t mini_fo -o base=/,sto=/data / /var
mini_fo: using base directory: /
mini_fo: using storage directory: /data
+ cd /var
+ mkdir rom
+ pivot_root . rom
+ sleep 1
+ ps
+ grep inotifywait
+ grep -v grep
+ echo starting inotifywait
starting inotifywait
+ inotifywait -c -r -m / @/dev @/proc @/var @/rom @/sto --exclude busybox|uClibc
|libcrypt-0
+ sleep 3
+ kill -1 1
+ exit 0
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
The system is going down NOW !!
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
Sending SIGTERM to all processes.
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
Sending SIGKILL to all processes.
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
init started:  BusyBox v1.4.1 (2007-04-27 23:13:49 CEST) multi-call binary
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
+ start
+ ps
+ grep inotifywait
+ grep -v grep
+ echo starting inotifywait
starting inotifywait
+ inotifywait -c -r -m / @/dev @/proc @/var @/rom @/sto --exclude busybox|uClibc
|libcrypt-0
+ sleep 3
+ mounted_proc=0
+ [ ! -e /proc/mounts ]
+ echo *** Mounting proc-fs. ***
*** Mounting proc-fs. ***
+ mount proc
+ mounted_proc=1
+ grep / mini_fo /proc/mounts
+ mount -o move /rom/data /data
+ umount /rom/proc
+ [ 1 = 1 ]
+ umount proc
+ echo *** Already running from mini_fo, done. ***
*** Already running from mini_fo, done. ***
+ ps
+ grep inotifywait
+ grep -v grep
+ echo starting inotifywait
starting inotifywait
+ inotifywait -c -r -m / @/dev @/proc @/var @/rom @/sto --exclude busybox|uClibc
|libcrypt-0
+ sleep 3
+ exit
[setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13
c )
mount: mounting sysfs on /var/sysfs failed
rootdir=/
table='/etc/device.table'
AR7WDT: System Init UEberwachung 120 Sekunden
HWRevision      58
ProductID       Fritz_Box_WLAN
SerialNumber    0000000000000000
annex   B
autoload        yes
...
set 'Activate Wizzard'
mknod: /var/flash/ar7.cfg: File exists
Loading /var/flash/ds_mod...done.
Loading passwords...done.
Loading hosts...done.
Loading config...done.
Loading modules...done.
cp /etc/default.049/fx_moh.default /var/fx_moh
attempting to load DSL Firmware '/lib/modules/ar0700xx.bin'
**** ANNEX: 'B'
*************************************
setting DSL Firmware to Annex B
tiatm: module license '
(C) Copyright 2003, Texas Instruments, Inc
(C) Copyright 2004, AVM
' taints kernel.
registered device TI Avalanche SAR
tiatm driver (patch_annex=0xc00793ec)
Sangam detected
[tiatm] Set StrictPriority=0
PM_STATUS2(before switch on) = 0x03
12 Volt:up korrekt 1.5 Volt: up korrekt Fuse Mode is disabled
PM_STATUS2(after switch on) = 0x03
12 Volt:up korrekt 1.5 Volt: up korrekt Fuse Mode is disabled
power up success !
#### DSP Core voltage set to 1,5 V ####
DSP binary filesize = 263376 bytes
[setup_irq]: irq 23 irqaction->handler 0xc0060208 (tn7atm_sar_irq+0x0/0x30 [tiatm] )
[setup_irq]: irq 47 irqaction->handler 0xc0060238 (tn7atm_dsl_irq+0x0/0x28 [tiatm] )
[tiatm]: Powermanagment (States => 1,3,10) supported!
Texas Instruments ATM driver: version:[4.06.04.41]
[capi_oslib] avm_stack_attach
[capi_oslib] driver params overwritten io_addr=0xbc000000 irq_num=9
Loading...
isdn_oslib: Driver 'isdn_oslib' attached to stack
CAPI driver registered.
AVM F!Box expected @ port 0xbc000000, irq 9
Loading...
isdn_oslib: Stack version 3.11-07
isdn_oslib: D-channel 0: DSS1
isdn_oslib: D-channel 1: DSS1
isdn_oslib: D-channel 2: POTS
isdn_oslib: D-channel 3: SIP
[setup_irq]: irq 9 irqaction->handler 0x94103b68 (irq_handler+0x0/0xbc )
[CAPI-DRIVER-IRQ] irq: 9 successfully registred
gpio_dataonly_test: 0
gpio_ssi_init: done
4 DUSLIC_SlotsAvail
DuSlic reseted

Slot0 LM_INT=0x2 0xa2 (414)
Slot0 LMstopped 0x0 0x58 (17)
Slot0 LM_INT=0x2 0xa0 (407)
Slot0 LMstopped 0x0 0x58 (16)
Slot0 LM_INT=0x0 0xb8 (407) IT_RING_OK
Slot0 LMstopped 0x0 0x1a (17)
Slot0 LM_INT=0x2 0xfe (407) IT_TIP_OK
Slot0 LMstopped 0x0 0x65 (12)
Slot0 LM=0xe0 0x14 (0) TIP=-56V
Slot0 LM=0x3 0xbb (75) TIP0V=-5V
Slot0 LM=0x8 0x30 (133) TIPLOOP=-13V
Slot0 LM=0x12 0x88 (0)
Slot1 LM_INT=0x3 0xc3 (417)
Slot1 LMstopped 0x0 0x7f (17)
Slot1 LM_INT=0x3 0xc1 (407)
Slot1 LMstopped 0x0 0x96 (16)
Slot1 LM_INT=0x5 0x6d (407) IT_RING_OK
Slot1 LMstopped 0x0 0xbb (16)
Slot1 LM_INT=0x3 0x57 (408) IT_TIP_OK
Slot1 LMstopped 0xff 0x54 (11)
Slot1 LM=0xdf 0x91 (0) TIP=-57V
Slot1 LM=0x3 0x20 (68) TIP0V=-4V
Slot1 LM=0x8 0x39 (123) TIPLOOP=-13V
Slot1 LM=0x13 0x2f (0)
Slot2 Found NO_SLIC
Slot3 Found POTS_SLIC
Max_Usable_XSC: 4
DuSlic reseted
Slot 3: used as POTS_SLIC

V23 FSK SW-Workaround_D!
Loaded.
modprobe: module avalanche_usb not found
modprobe: failed to load module avalanche_usb
kdsldmod: Unknown symbol set_avm_recvhook
insmod: cannot insert '/lib/modules/2.6.13.1-ar7/kernel/drivers/dsld/kdsldmod.ko': Success (2): Success
modprobe: failed to load module kdsldmod
Jan  1 01:00:36 cltmgr[669]: Couldn't load shared library  libavmssl.so - File not found - Success (0)
Jan  1 01:00:36 cltmgr[669]: process priority is 19
Jan  1 01:00:37 websrv[677]: Couldn't load shared library  libavmssl.so - File not found - Success (0)
Jan  1 01:00:37 igdd[682]: Couldn't load shared library  libavmssl.so - File not found - Success (0)
Jan  1 01:00:38 websrv[677]: startup (Feb 24 2007 08:03:08)
Jan  1 01:00:38 cltmgr[671]: dlopen(/usr/share/ctlmgr/libdect.so) failed: File not found
Jan  1 01:00:38 cltmgr[671]: dlopen(/usr/share/ctlmgr/libtamconf.so) failed: File not found
Jan  1 01:00:38 cltmgr[671]: dlopen(/usr/share/ctlmgr/libvdsl.so) failed: File not found
[avm_power] : ethernet not registered
[avm_power] : ethernet not registered
[avm_power] : ethernet not registered

Jan[avm_power] : ethernet not registered
  1 01:00:38 cltmgr[671]: dlopen(/usr/share/ctlmgr/libmini.so) failed: File notfound
Jan  1 01:00:38 cltmgr[671]: mapping to info-LED already exist
Jan  1 01:00:38 cltmgr[671]: box init ok
[tiatm] DSL in training!
Jan  1 01:00:39 cltmgr[671]: /dev/avm_power <-- MODE=ata
Jan  1 01:00:39 cltmgr[671]: WAN (ata) led value = 1
Jan  1 01:00:39 cltmgr[671]: 0.0.0.0:2048: SIOCGET_TC_INDEX failed - Invalid argument (22)
Jan  1 01:00:39 cltmgr[671]: TR069_Init() returned -1
Jan  1 01:00:39 cltmgr[671]: verbose: DISABLED
Jan  1 01:00:39 multid[689]: startup (Feb 24 2007 08:03:26)
Jan  1 01:00:39 multid[689]: Couldn't load shared library  libavmssl.so - File not found - Bad file descriptor (9)
Jan  1 01:00:39 multid[691]: 0.0.0.0:2049: SIOCGET_TC_INDEX failed - Invalid argument (22)
Jan  1 01:00:39 multid[691]: if_clearip[cpmac] cpmac_main_ioctl, unknown ioctl 35142
adddevice eth0 entered promiscuous mode
r: [setup_irq]: irq 27 irqaction->handler 0x940e5b7c (lacpmac_main_isr+0x0/0x78n:)
0: SIOCSIFADlan: port 1(eth0) entering learning state
DRlan: topology change detected, propagating
 flan: port 1(eth0) entering forwarding state
ailed - No such device (19)
Jan  1 01:00:39 multid[691]: mrouter: using IGMPv3 for upstream interface eth0
Jan  1 01:00:39 multid[691]: mrouter: using IGMPv3 for other interfaces
Jan  1 01:00:39 multid[691]: DHCPD on lan:0 skipped, is virtual interface
Jan  1 01:00:39 multid[691]: DDNS: bigraph.mine.nu
Jan  1 01:00:39 multid[691]: DDNS: 1 accounts
Jan  1 01:00:39 multid[691]: interface eth0 new.
Jan  1 01:00:39 multid[691]: interface lo new.
Jan  1 01:00:39 multid[691]: interface lo up.
Jan  1 01:00:39 multid[691]: mrouter: lo: no multicast interface, ignored.
Jan  1 01:00:39 multid[691]: verbose: DISABLED
Jan  1 01:00:40 dsld[696]: Couldn't load shared library  libavmssl.so - File not found - No such file or directory (2)
Jan  1 01:00:40 dsld[696]: startup (Feb 24 2007 08:03:55)
Jan  1 01:00:40 dsld[696]: no need to run, exit (ipclient)
telefon: use clock_gettime(CLOCK_MONOTONIC)!
telefon: SIGCHLD received!
telefon: kein Capi!
voipd: Couldn't load shared library  libavmssl.so - File not found - Success (0)
/etc/init.d/rc.voip: /etc/init.d/rc.voip: 74: pbd: not found
Jan  1 01:00:42 multid[691]: 0.0.0.0:2051: SIOCSET_TC_INDEX failed - Invalid argument (22)
Jan  1 01:00:42 multid[691]: 0.0.0.0:2049: SIOCSET_TC_INDEX failed - Invalid argument (22)
Jan  1 01:00:42 voipd[717]: startup (AVM FRITZ!Box Fon 06.04.30 AVM SIP v6.02.06 Feb 28 2007 12:04:44)
May  4 17:53:28 voipd[717]: 0.0.0.0:7077: SIOCGET_TC_INDEX failed - Invalid argument (22)
May  4 17:53:28 voipd[717]: Warning: CAPI_GET_PROFILE failed - 0x1109
May  4 17:53:28 voipd[717]: INFO led: off (value=0)
May  4 17:53:28 voipd[717]: INTERNET led value = 0
May  4 17:53:28 voipd[717]: DEBUG: exit: 0 entries freed
run_clock demon started

AR7WDT: System Init UEberwachung abgeschlossen (97450 ms noch verfuegbar)
SysRq : Changing Loglevel
Loglevel set to 4
rc.mod version ds26-14.4
crond is disabled
Starting telnetd...done.
Starting webinterface...done.
firewall is disabled
Starting syslogd...done.
Starting ssh server...done.
+ start
+ ps
+ grep inotifywait
+ grep -v grep
+ echo starting inotifywait
starting inotifywait
+ inotifywait -c -r -m / @/dev @/proc @/var @/rom @/sto --exclude busybox|uClibc|libcrypt-0
+ sleep 3
+ mounted_proc=0
+ [ ! -e /proc/mounts ]
+ echo mini_fo already started.
mini_fo already started.
+ exit
Setting up virtual network interface ... done.

Please press Enter to activate this console.