#
# OpenEmbedded local configuration file (sample)
#
# Please visit the Wiki at http://openembedded.org/ for more info.
#
#
# Be SURE to read this file in its entirety and the GettingStarted page on the
# wiki before proceeding.
#
# Once you have done that, remove the line at the end of this
# file and build away.
#
# WARNING: lines starting with a space (' ') will result in parse failures.
# Remove '# ' from commented lines to activate them.
#
# NOTE: Do NOT use $HOME in your paths, BitBake does NOT expand ~ for you. If you
# must have paths relative to your homedir use ${HOME} (note the {}'s there
# you MUST have them for the variable expansion to be done by BitBake). Your
# paths should all be absolute paths (They should all start with a / after
# expansion. Stuff like starting with ${HOME} or ${TOPDIR} is ok).
# Use this to specify where BitBake should place the downloaded sources into
DL_DIR = "${HOME}/linux-ppc/downloads"
# Delete the line below. Then specify which .bb files to consider for
# your build. Typically this will be something like BBFILES = "/path/to/openembedded/packages/*/*.bb"
BBFILES = "/home/pfalcon/linux-ppc/org.openembedded.dev/packages/*/*.bb"
# Use the BBMASK below to instruct BitBake to _NOT_ consider some .bb files
# This is a regulary expression, so be sure to get your parenthesis balanced.
BBMASK = ""
# Uncomment this if you want to use a prebuilt toolchain. You will need to
# provide packages for toolchain and additional libraries yourself. You also
# have to set PATH in your environment to make sure BitBake finds additional binaries.
# Note: You will definitely need to say:
# ASSUME_PROVIDED += "virtual/arm-linux-gcc-2.95"
# to build any of two Linux 2.4 Embedix kernels,
# i.e. openzaurus-sa-2.4.18 and openzaurus-pxa-2.4.18 - and don't forget
# to rename the binaries as instructed in the Wiki.
# ASSUME_PROVIDED += "virtual/${TARGET_PREFIX}gcc virtual/libc"
# Select between multiple alternative providers, if more than one is eligible.
PREFERRED_PROVIDERS = "virtual/qte:qte virtual/libqpe:libqpe-opie"
#PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-qpe"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
# Uncomment this to specify where BitBake should create its temporary files.
# Note that a full build of everything in OpenEmbedded will take GigaBytes of hard
# disk space, so make sure to free enough space. The default TMPDIR is
# <build directory>/tmp
# Don't use symlinks in in the path to avoid problems
# TMPDIR = /usr/local/projects/oetmp
# Uncomment this to specify a machine to build for. See the conf directory
# for machines currently known to OpenEmbedded.
MACHINE ?= "h4000"
#MACHINE ?= "h3600"
PREFERRED_VERSION_linux-openzaurus = "2.6.16"
# Use this to specify the target architecture. Note that this is only
# needed when building for a machine not known to OpenEmbedded. Better use
# the MACHINE attribute (see above)
# TARGET_ARCH = "arm"
# Use this to specify the target operating system. The default is "linux",
# for a normal linux system with glibc. Set this to "linux-uclibc" if you want
# to build a uclibc based system.
# TARGET_OS = "linux"
# TARGET_OS = "linux-uclibc"
# Uncomment this to select a distribution policy. See the conf directory
# for distributions currently known to OpenEmbedded.
# Although they no longer contain version number in the (file-)name
# familiar-unstable and openzaurus-unstable are so called "versioned"
# distros, i.e. they explicitely select specific versions of various
# packages.
# Stay away from unversioned distros unless you really know what you are doing
DISTRO = "angstrom-2007.1"
#DISTRO = "angstrom-2007.1-oabi"
#DISTRO_TYPE = "release"
# So far, angstrom.conf and familiar.conf set ENABLE_BINARY_LOCALE_GENERATION
# to generate binary locale packages at build time using qemu-native and
# thereby guarantee i18n support on all devices. If your build breaks on
# qemu-native consider disabling ENABLE_BINARY_LOCALE_GENERATION (note that
# this breaks i18n on devices with less than 128MB RAM) or installing
# a working third-party qemu (e.g. provided by your distribution) and
# adding qemu-native to ASSUME_PROVIDED
# ENABLE_BINARY_LOCALE_GENERATION = "0"
# ASSUME_PROVIDED += "qemu-native"
# Uncomment this to select a particular major kernel version if the MACHINE setting
# supports more than one major kernel version. Currently this is suported by the
# following MACHINE types: poodle, tosa and simpad.
# MACHINE_KERNEL_VERSION = "2.6"
# Uncomment one of these to build packages during the build process.
# This is done automatically if you set DISTRO (see above)
# INHERIT = "package_ipk"
# INHERIT = "package_tar"
# Add the required image file system types below. Valid are jffs2, tar, cramfs and ext2
IMAGE_FSTYPES = "cpio.gz"
# Uncomment this to disable the parse cache (not recommended).
# CACHE = ""
# Uncomment this if you want BitBake to emit debugging output
# BBDEBUG = "yes"
# Uncomment these two if you want BitBake to build images useful for debugging.
# Note that INHIBIT_PACKAGE_STRIP needs a package format to be defined
# DEBUG_BUILD = "1"
# INHIBIT_PACKAGE_STRIP = "1"
# Uncomment these to build a package such that you can use gprof to profile it.
# NOTE: This will only work with 'linux' targets, not
# 'linux-uclibc', as uClibc doesn't provide the necessary
# object files. Also, don't build glibc itself with these
# flags, or it'll fail to build.
#
# PROFILE_OPTIMIZATION = "-pg"
# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
# LDFLAGS =+ "-pg"
# Uncomment this to enable parallel make.
# This allows make to spawn mutliple processes to take advantage of multiple
# processors. Useful on SMP machines. This may break some packages - we're
# in the process of marking these so let us know if you find any.
# PARALLEL_MAKE = "-j 4"
# Uncomment this if you want BitBake to emit the log if a build fails.
BBINCLUDELOGS = "yes"
# Specifies a location to search for pre-generated tarballs when fetching
# a cvs:// URI. Outcomment this, if you always want to pull directly from CVS.
#CVS_TARBALL_STASH = "http://www.oesources.org/source/current/"
# EDIT THIS FILE and then remove the line below before using!
#FETCHCOMMAND_wget = "/usr/bin/env wget -t 5 --passive-ftp -P ${DL_DIR} ${URI}"
FETCHCOMMAND_wget = "/usr/bin/env oe-wget-wrapper.py ${DL_DIR} ${URI}"
#FETCHCOMMAND_cvs = "/usr/bin/env cvs -d${CVSROOT} co ${CVSCOOPTS} ${CVSMODULE}"
FETCHCOMMAND_cvs = "/usr/bin/env oe-cvs-wrapper.py ${CVSROOT} ${CVSMODULE} ${CVSCOOPTS}"
RESUMECOMMAND = ""
#RESUMECOMMAND_wget = "/usr/bin/env wget -c -t 5 --passive-ftp -P ${DL_DIR} ${URI}"
RESUMECOMMAND_wget = "/usr/bin/env oe-wget-wrapper.py ${DL_DIR} ${URI}"
UPDATECOMMAND = ""
#UPDATECOMMAND_cvs = "/usr/bin/env cvs update -d -P ${CVSCOOPTS}"
UPDATECOMMAND_cvs = "/usr/bin/env oe-cvs-wrapper.py ${CVSROOT} update ${CVSCOOPTS}"
#FETCHCOMMAND_svn = "svn co ${SVNCOOPTS} ${SVNROOT}"
#UPDATECOMMAND_svn = "svn update ${SVNCOOPTS}"
# Opie
require conf/distro/include/preferred-opie-versions-1.2.3-pre.inc
#SRCDATE_libopie2 = "20070120"
#SRCDATE_libopie2 = "20070308"
#PREFERRED_VERSION_libopie2 = "1.2.2+cvs${SRCDATE_libopie2}"
#SRCDATE_opie-bluetoothapplet = "20070209"
#OPIE_CVS_PV_opie-bluetoothapplet = "1.2.2+cvs${SRCDATE_opie-bluetoothapplet}"
#PREFERRED_VERSION_opie-bluetoothapplet = "1.2.2+cvs${SRCDATE_opie-bluetoothapplet}"
#SRCDATE_opie-bluetoothmanager = "20070209"
#OPIE_CVS_PV_opie-bluetoothmanager = "1.2.2+cvs${SRCDATE_opie-bluetoothmanager}"
#PREFERRED_VERSION_opie-bluetoothmanager = "1.2.2+cvs${SRCDATE_opie-bluetoothmanager}"
#SRCDATE_libopietooth1 = "20070209"
#OPIE_CVS_PV_libopietooth1 = "1.2.2+cvs${SRCDATE_libopietooth1}"
#PREFERRED_VERSION_libopietooth1 = "1.2.2+cvs${SRCDATE_libopietooth1}"
FEED_URIS_append_angstrom = " \
local##http://192.168.20.210:8080/feeds/angstrom"
FEED_URIS_append_angstrom = " \
local-all##http://192.168.20.210:8080/feeds/angstrom/all"
FEED_URIS_append_angstrom = " \
local-armv5te##http://192.168.20.210:8080/feeds/angstrom/armv5te"
#SRCDATE_xserver-common = "20061118"
#PREFERRED_VERSION_xserver-common = "1.12+svn${SRCDATE_xserver-common}"
IMAGE_ROOTFS_SIZE_ext2.gz ?= "40960"
IMAGE_ROOTFS_SIZE_ext2 ?= "16384"
#DEPLOY_KEEP_PACKAGES = "1"
PREFERRED_VERSION_linux-handhelds-2.6_h3900 = "2.6.19-hh8"
PREFERRED_VERSION_linux-handhelds-2.6_h4000 = "2.6.20-hh9"
GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 en_US.UTF-8"