rendered paste bodyLinux version 2.6.20-ck (root@tk-gwa) (gcc version 4.1.2) #1 SMP PREEMPT Sat Apr 21 15:02:32 IST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f4e40
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
HighMem 131056 -> 131056
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125969 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP (v000 AOpen ) @ 0x000f6970
ACPI: RSDT (v001 AOpen AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 AOpen AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 AOpen AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7080
ACPI: DSDT (v001 AOPEN AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Detected 2494.990 MHz processor.
Built 1 zonelists. Total pages: 130033
Kernel command line: ro root=/dev/sda6 devfs=nomount vga=0x318 video=vesa:ywrap,mtrr rootfstype=xfs
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514352k/524224k available (2312k kernel code, 9332k reserved, 760k data, 260k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc0407000 - 0xc0448000 ( 260 kB)
.data : 0xc03421a1 - 0xc04001ec ( 760 kB)
.text : 0xc0100000 - 0xc03421a1 (2312 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4992.25 BogoMIPS (lpj=2496129)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 00003080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
Early unpacking initramfs... done
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 04
Total of 1 processors activated (4992.25 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb170, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 4080-40bf claimed by ICH4 GPIO
0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
0000:00:1f.1: trying to change BAR2 from 0000 to 0170
0000:00:1f.1: trying to change BAR3 from 0000 to 0374
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0a: ioport range 0x4000-0x40bf could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e8000000-e9ffffff
PREFETCH window: d8000000-e7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: a000-cfff
MEM window: ea000000-ebffffff
PREFETCH window: 30000000-300fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1127k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 6144k, total 131072k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:e1b0
vesafb: pmi: set display start = c00ce1f5, set palette = c00ce27a
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Thermal Zone [THRM] (31 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 260k freed
libata version 2.00 loaded.
ata_piix 0000:00:1f.1: version 2.00ac7
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
scsi0 : ata_piix
ata1.00: ATA-6, max UDMA/100, 234441648 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.01: ATAPI, max MWDMA2
ata1.00: configured for UDMA/100
ata1.01: configured for MWDMA2
scsi1 : ata_piix
ata2.00: ATAPI, max MWDMA2
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA ST3120023A 3.33 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM HITACHI DVD-ROM GD-2500 A011 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM PLEXTOR CD-R PX-W1610A 1.04 PQ: 0 ANSI: 5
sata_sil 0000:02:07.0: version 2.0
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 17
ata3: SATA max UDMA/100 cmd 0xE0802080 ctl 0xE080208A bmdma 0xE0802000 irq 17
ata4: SATA max UDMA/100 cmd 0xE08020C0 ctl 0xE08020CA bmdma 0xE0802008 irq 17
scsi2 : sata_sil
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: ATA-7, max UDMA/133, 145226112 sectors: LBA48 NCQ (depth 0/32)
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/100
scsi3 : sata_sil
ata4: SATA link down (SStatus 0 SControl 310)
scsi 2:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sr 0:0:1:0: Attached scsi CD-ROM sr0
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 1:0:0:0: Attached scsi CD-ROM sr1
sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 2:0:0:0: Attached scsi disk sdb
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x230520
end_request: I/O error, dev sr0, sector 9180288
Buffer I/O error on device sr0, logical block 1147536
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x230520
end_request: I/O error, dev sr0, sector 9180288
Buffer I/O error on device sr0, logical block 1147536
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x23053e
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x23053e
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x23053e
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x23053e
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x23053e
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x23053e
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x230530
end_request: I/O error, dev sr0, sector 9180352
Buffer I/O error on device sr0, logical block 1147544
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x23053c
end_request: I/O error, dev sr0, sector 9180400
Buffer I/O error on device sr0, logical block 1147550
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x23053e
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0x23053e
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 22 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xe0828000, 00:01:80:0d:0c:64, IRQ 18
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000d800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000d400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
input: PC Speaker as /class/input/input2
usb 1-1.1: new full speed USB device using uhci_hcd and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usb 1-1.3: new full speed USB device using uhci_hcd and address 4
usb 1-1.3: configuration #1 chosen from 1 choice
intel8x0_measure_ac97_clock: measured 60264 usecs
intel8x0: clocking to 48000
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0C17
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Linux agpgart interface v0.101 (c) Dave Jones
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
fuse init (API version 7.8)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
sr 1:0:0:0: Attached scsi generic sg2 type 5
sd 2:0:0:0: Attached scsi generic sg3 type 0
agpgart: Detected an Intel i845 Chipset.
agpgart: AGP aperture is 128M @ 0xd0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
input: PS/2 Generic Mouse as /class/input/input5
gameport: NS558 PnP Gameport is pnp00:09/gameport0, io 0x201, speed 852kHz
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
Adding 586332k swap on /dev/disk/by-label/svapp. Priority:-1 extents:1 across:586332k
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
PPP generic driver version 2.4.2
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
PPP BSD Compression module registered
eth0: no IPv6 routers present
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0xe8
end_request: I/O error, dev sr0, sector 928
Buffer I/O error on device sr0, logical block 116
sr 0:0:1:0: SCSI error: return code = 0x08000002
sr0: Current: sense key=0x3
ASC=0x11 ASCQ=0x0
Info fld=0xe8
end_request: I/O error, dev sr0, sector 928
Buffer I/O error on device sr0, logical block 116
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
**WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to specify physical device; fix it!
**WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] forgot to specify physical device; fix it!
**WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] forgot to specify physical device; fix it!
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd 25/00:e8:9f:84:03/00:01:00:00:00/e0 tag 0 cdb 0x0 data 249856 in
res ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3: failed to recover some devices, retrying in 5 secs
ata3: hard resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/100
ata3: EH complete
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:00:17:d5:27/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in
res 40/00:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x4 (timeout)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/100
ata3: EH complete
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:00:cf:56:1a/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in
res ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3: failed to recover some devices, retrying in 5 secs
ata3: hard resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/100
ata3: EH complete
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: (BMDMA2 stat 0x86d3209)
ata3.00: cmd c8/00:00:cf:78:1a/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in
res 51/04:00:cf:78:1a/ff:ff:ff:ff:ff/e0 Emask 0x1 (device error)
ata3.00: configured for UDMA/100
ata3: EH complete
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: limiting speed to UDMA/66
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:00:cf:84:1a/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in
res ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3: failed to recover some devices, retrying in 5 secs
ata3: hard resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/66
ata3: EH complete
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: limiting speed to UDMA/44
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:00:ff:87:11/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in
res 40/00:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x4 (timeout)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/44
ata3: EH complete
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: limiting speed to UDMA/33
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:00:ff:91:11/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in
res 40/00:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x4 (timeout)
ata3: port is slow to respond, please be patient (Status 0xd8)
ata3: port failed to respond (30 secs, Status 0xd8)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/33
ata3: EH complete
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
ata3.00: limiting speed to UDMA/25
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:00:ff:93:11/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in
res ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3: failed to recover some devices, retrying in 5 secs
ata3: hard resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/25
ata3: EH complete
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: limiting speed to UDMA/16
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:80:3f:05:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 in
res 40/00:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x4 (timeout)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for UDMA/16
ata3: EH complete
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: (BMDMA2 stat 0x86d3209)
ata3.00: cmd c8/00:80:3f:0d:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 in
res 51/04:80:3f:0d:00/ff:ff:ff:ff:ff/e0 Emask 0x1 (device error)
ata3.00: configured for UDMA/16
ata3: EH complete
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: limiting speed to PIO4
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd c8/00:80:38:05:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 in
res 40/00:80:3f:0d:00/ff:ff:ff:ff:ff/e0 Emask 0x4 (timeout)
ata3: soft resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: configured for PIO4
ata3: EH complete
SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA