rendered paste bodyivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.3 (tagged release) loading
ivtv: Linux version: 2.6.15-gentoo-r1 SMP preempt PENTIUM4 gcc-3.3
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 250 card (cx23415 based)
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
msp3400 0-0040: chip=MSP3435G-B6 +nicam +simple +simpler +radio mode=simpler
msp3400 0-0040: msp34xxg daemon started
ivtv0: i2c attach to card #0 ok [client=MSP3435G-B6, addr=40]
tveeprom 0-0050: Hauppauge model 48011, rev G510, serial# 2669773
tveeprom 0-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is MSP3435 (idx 10)
tveeprom 0-0050: has radio
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
tuner 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
ivtv0: Initialized WinTV PVR 250, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43]
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
tveeprom 1-0050: The eeprom says no radio is present, but the tuner type
tveeprom 1-0050: indicates otherwise. I will assume that radio is present.
tveeprom 1-0050: Hauppauge model 26552, rev C268, serial# 8227649
tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has radio, has no IR remote
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv1: Create encoder radio stream
tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
ivtv1: Initialized WinTV PVR 150, card #1
ivtv: ====================== NEXT CARD ======================
ivtv2: Autodetected WinTV PVR 150 card (cx23416 based)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ivtv2: i2c attach to card #2 ok [client=tveeprom, addr=50]
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #2)
ivtv2: i2c attach to card #2 ok [client=(tuner unset), addr=61]
tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #2)
ivtv2: i2c attach to card #2 ok [client=tda9887, addr=43]
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
ivtv2: i2c attach to card #2 ok [client=cx25840, addr=44]
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #2)
ivtv2: i2c attach to card #2 ok [client=wm8775, addr=1b]
tveeprom 2-0050: The eeprom says no radio is present, but the tuner type
tveeprom 2-0050: indicates otherwise. I will assume that radio is present.
tveeprom 2-0050: Hauppauge model 26552, rev C268, serial# 8227643
tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is CX25843 (idx 37)
tveeprom 2-0050: decoder processor is CX25843 (idx 30)
tveeprom 2-0050: has radio, has no IR remote
ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv2: Encoder revision: 0x02050032
ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv2: Create encoder radio stream
tuner 2-0061: type set to 47 (LG NTSC (TAPE series))
ivtv2: Initialized WinTV PVR 150, card #2
ivtv: ==================== END INIT IVTV ====================