rendered paste body<5>Linux version 2.6.18-at0 (hcegtvedt@hcegtvedt) (gcc version 4.0.2-atmel.0.99.2) #1 Fri Jan 19 14:45:28 CET 2007
<4>CPU: AP7000 [01] revision 0 (AVR32B revision 1)
<4>CPU: MMU configuration: Shared TLB
<4>CPU: features: java perfctr ocd
<4>CPU: Running at 130.000 MHz
<4>Physical memory:
<4> 10000000 - 12000000
<4>Reserved memory:
<4>Node 0: bdata = 9017ea60, bdata->node_bootmem_map = 90189000
<4>Node 0: Kernel image 10000000 - 10188fe0
<4>Exception vectors start at 9000e000
<4>CPU: Paging enabled
<4>Node 0: start_pfn = 0x10000, low = 0x12000
<7>On node 0 totalpages: 8192
<7> DMA zone: 8192 pages, LIFO batch:1
<4>Node 0: mem_map starts at 9018b000
<4>Built 1 zonelists. Total pages: 8192
<5>Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2
<4>PID hash table entries: 256 (order: 8, 1024 bytes)
<4>Before time_init: count=21b30e75, compare=00000000
<4>Cycle counter: mult=504123, shift=16
<4>After time_init: count=00000021, compare=0007ef40
<4>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>Memory: 30888k/30908k available (1048k kernel code, 1860k reserved, 212k data, 56k init)
<4>Calibrating delay using timer specific routine.. 260.38 BogoMIPS (lpj=520773)
<4>Mount-cache hash table entries: 512
<6>NET: Registered protocol family 16
<4>pio: invalid pin 128
<4>Stack: (0x901ebf40 to 0x901ec000)
<4>bf40: 900106fa 901ebf54 00000000 00000000 00000000 90002966 901ebf68 00000000
<4>bf60: 00000000 00000000 90002fd6 901ebf8c 00000000 9000ba44 00000000 00000000
<4>bf80: 90017adc 9000e5dc 00000000 900034f8 901ebfa0 9000ba7c 00000000 00000000
<4>bfa0: 9000e63a 901ebfdc 9000b87c 9000d400 00000000 00000000 00400000 90011478
<4>bfc0: 90011478 901ec000 00000000 00000000 00000000 00000000 00000000 90017adc
<4>bfe0: 00000000 00000000 00000000 00000000 00000000 90017adc 9000e5dc 00000000
<4>Call trace:
<4> [<900106e8>] show_stack+0x3c/0x44
<4> [<900106fa>] dump_stack+0xa/0xc
<4> [<90002966>] at32_select_gpio+0xba/0xc4
<4> [<90002fd6>] at32_add_device_mmci+0x62/0x8c
<4> [<900034f8>] atngw_init+0x4c/0x60
<4> [<9000e63a>] init+0x5e/0x1c0
<4> [<90017adc>] do_exit+0x0/0x598
<4>
<4>
<6>pdc pdc.0: Atmel Peripheral DMA Controller enabled
<4>EIM: External Interrupt Module at 0xfff00000, IRQ 19
<4>EIM: Handling 4 external IRQs, starting with IRQ 64
<6>smc smc.0: Atmel Static Memory Controller at 0xfff03400
<6>pio0: Atmel Port Multiplexer at 0xffe02800 (irq 13)
<6>pio0: Handling 32 external IRQs, starting with IRQ 96
<6>pio1: Atmel Port Multiplexer at 0xffe02c00 (irq 14)
<6>pio1: Handling 32 external IRQs, starting with IRQ 128
<6>pio2: Atmel Port Multiplexer at 0xffe03000 (irq 15)
<6>pio2: Handling 32 external IRQs, starting with IRQ 160
<6>pio3: Atmel Port Multiplexer at 0xffe03400 (irq 16)
<6>pio3: Handling 32 external IRQs, starting with IRQ 192
<6>dmac0: DesignWare DMA controller at 0xff200000 irq 2
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 256 (order: -2, 1024 bytes)
<4>TCP established hash table entries: 1024 (order: 0, 4096 bytes)
<4>TCP bind hash table entries: 512 (order: -1, 2048 bytes)
<6>TCP: Hash tables configured (established 1024 bind 512)
<6>TCP reno registered
<7>smc cs0: setup/00030001 pulse/06030504 cycle/00080008 mode/00001103
<6>JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
<6>io scheduler noop registered
<6>io scheduler cfq registered (default)
<6>Serial: Atmel USART3 driver
<6>usart.1: ttyS0 at MMIO 0xffe01000 (irq = 7) is a USART3
<6>loop: loaded (max 8 devices)
<6>eth0: Atmel MACB at 0xfff01800 irq 25 (00:04:25:1c:50:1e)
<6>eth1: Atmel MACB at 0xfff01c00 irq 26 (00:04:25:1c:50:1f)
<5>physmap platform flash device: 00800000 at 00000000
<6>physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
<4> Amd/Fujitsu Extended Query Table at 0x0041
<5>number of CFI chips: 1
<5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
<5>cmdlinepart partition parsing not available
<5>RedBoot partition parsing not available
<5>Using physmap partition information
<5>Creating 3 MTD partitions on "physmap-flash.0":
<5>0x00000000-0x00020000 : "u-boot"
<5>0x00020000-0x007f0000 : "root"
<5>0x007f0000-0x00800000 : "env"
<6>atmel_spi atmel_spi.0: Atmel SPI Controller at 0xffe00000 (irq 3)
<6>mtd_dataflash spi0.0: AT45DB642x (8448 KBytes)
<4>ip_conntrack version 2.4 (256 buckets, 2048 max) - 204 bytes per conntrack
<4>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP bic registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<6>Time: avr32 clocksource has been installed.
<4>VFS: Mounted root (jffs2 filesystem).
<6>Freeing init memory: 56K (90000000 - 9000e000)
<4>: no WP pin available (-19)
<6>mmc0: Atmel MCI controller at 0xfff02400 irq 28
<6>JFFS2 write-buffering enabled buffer (1056) erasesize (8448)
<6>eth0: link down
<6>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
<6>eth1: link down
<4>atmel_spi atmel_spi.0: fifo overrun (176/178 remaining)
<3>JFFS2 error: (183) jffs2_get_inode_nodes: short read at 0x1f3d00: 0 instead of 352.
<3>JFFS2 error: (183) jffs2_do_read_inode_internal: cannot read nodes for ino 212, returned error is -5
<4>Returned error for crccheck of ino #212. Expect badness...
<6>created gpio0 (pio0/0x00010000) as (254:0)
<6>created gpio1 (pio0/0x00080000) as (254:1)