rendered paste body[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Mar 13 23:32:38 UTC 2007 (Ubuntu 2.6.17-11.37-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5790
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia ) @ 0x000f70f0
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7f00
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2083.627 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.692000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.692000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.720000] Memory: 1029628k/1048512k available (1911k kernel code, 18104k reserved, 1073k data, 308k init, 131008k highmem)
[17179570.720000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.800000] Calibrating delay using timer specific routine.. 4171.57 BogoMIPS (lpj=8343158)
[17179570.800000] Security Framework v1.0.0 initialized
[17179570.800000] SELinux: Disabled at boot.
[17179570.800000] Mount-cache hash table entries: 512
[17179570.800000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.800000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.800000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.800000] CPU: L2 Cache: 512K (64 bytes/line)
[17179570.800000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179570.800000] Checking 'hlt' instruction... OK.
[17179570.816000] SMP alternatives: switching to UP code
[17179570.816000] Freeing SMP alternatives: 16k freed
[17179570.816000] checking if image is initramfs... it is
[17179571.248000] Freeing initrd memory: 5327k freed
[17179571.248000] ACPI: Core revision 20060707
[17179571.256000] ACPI: Looking for DSDT ... not found!
[17179571.256000] CPU0: AMD Athlon(tm) XP 2800+ stepping 00
[17179571.256000] Total of 1 processors activated (4171.57 BogoMIPS).
[17179571.256000] ENABLING IO-APIC IRQs
[17179571.256000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179571.400000] Brought up 1 CPUs
[17179571.400000] migration_cost=0
[17179571.400000] NET: Registered protocol family 16
[17179571.400000] EISA bus registered
[17179571.400000] ACPI: bus type pci registered
[17179571.416000] PCI: PCI BIOS revision 2.10 entry at 0xfb6f0, last bus=2
[17179571.416000] PCI: Using configuration type 1
[17179571.416000] Setting up standard PCI resources
[17179571.428000] ACPI: Interpreter enabled
[17179571.428000] ACPI: Using IOAPIC for interrupt routing
[17179571.428000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.428000] PCI: Probing PCI hardware (bus 00)
[17179571.432000] PCI: nForce2 C1 Halt Disconnect fixup
[17179571.436000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:09.0
[17179571.436000] Boot video device is 0000:02:00.0
[17179571.436000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.500000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179571.504000] ACPI: Power Resource [ISAV] (on)
[17179571.504000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179571.504000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[17179571.504000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179571.504000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179571.504000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[17179571.504000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179571.504000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[17179571.504000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[17179571.508000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179571.508000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179571.508000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179571.508000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179571.508000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179571.508000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179571.508000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179571.508000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179571.508000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179571.508000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179571.508000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[17179571.508000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21) *0, disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21) *0, disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21) *0, disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21) *0, disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21) *0, disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21) *0, disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21) *0, disabled.
[17179571.512000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21) *0, disabled.
[17179571.516000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21) *0, disabled.
[17179571.516000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21) *0, disabled.
[17179571.516000] ACPI: PCI Interrupt Link [APSI] (IRQs 22) *0, disabled.
[17179571.520000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.520000] pnp: PnP ACPI init
[17179571.524000] pnp: PnP ACPI: found 15 devices
[17179571.524000] PnPBIOS: Disabled by ACPI PNP
[17179571.524000] PCI: Using ACPI for IRQ routing
[17179571.524000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.552000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179571.552000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179571.552000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179571.552000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179571.552000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[17179571.552000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[17179571.552000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[17179571.552000] pnp: 00:01: ioport range 0x5100-0x513f has been reserved
[17179571.552000] PCI: Bridge: 0000:00:08.0
[17179571.552000] IO window: 9000-9fff
[17179571.552000] MEM window: d6000000-d60fffff
[17179571.552000] PREFETCH window: d6100000-d61fffff
[17179571.552000] PCI: Bridge: 0000:00:1e.0
[17179571.552000] IO window: a000-afff
[17179571.552000] MEM window: d4000000-d5ffffff
[17179571.552000] PREFETCH window: b0000000-cfffffff
[17179571.552000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179571.552000] NET: Registered protocol family 2
[17179571.592000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.592000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179571.592000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179571.592000] TCP: Hash tables configured (established 131072 bind 65536)
[17179571.592000] TCP reno registered
[17179571.592000] audit: initializing netlink socket (disabled)
[17179571.592000] audit(1177500541.592:1): initialized
[17179571.592000] highmem bounce pool size: 64 pages
[17179571.592000] VFS: Disk quotas dquot_6.5.1
[17179571.592000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.592000] Initializing Cryptographic API
[17179571.592000] io scheduler noop registered
[17179571.592000] io scheduler anticipatory registered
[17179571.592000] io scheduler deadline registered
[17179571.592000] io scheduler cfq registered (default)
[17179571.592000] isapnp: Scanning for PnP cards...
[17179571.948000] isapnp: No Plug & Play device found
[17179571.968000] Real Time Clock Driver v1.12ac
[17179571.968000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.968000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.968000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.972000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.972000] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.972000] mice: PS/2 mouse device common for all mice
[17179571.972000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.972000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.972000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.972000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179571.972000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179571.972000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.972000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.976000] EISA: Probing bus 0 at eisa.0
[17179571.976000] Cannot allocate resource for EISA slot 4
[17179571.976000] Cannot allocate resource for EISA slot 5
[17179571.976000] EISA: Detected 0 cards.
[17179571.976000] TCP bic registered
[17179571.976000] NET: Registered protocol family 1
[17179571.976000] NET: Registered protocol family 8
[17179571.976000] NET: Registered protocol family 20
[17179571.976000] Using IPI No-Shortcut mode
[17179571.976000] ACPI: (supports S0 S1 S4 S5)
[17179571.976000] Freeing unused kernel memory: 308k freed
[17179572.288000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.044000] Capability LSM initialized
[17179573.384000] SCSI subsystem initialized
[17179573.388000] libata version 1.20 loaded.
[17179573.392000] sata_nv 0000:00:0b.0: version 0.8
[17179573.392000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
[17179573.392000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APSI] -> GSI 22 (level, high) -> IRQ 177
[17179573.392000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[17179573.392000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE400 irq 177
[17179573.392000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE408 irq 177
[17179573.596000] ata1: SATA link down (SStatus 0)
[17179573.596000] scsi0 : sata_nv
[17179573.800000] ata2: SATA link up 1.5 Gbps (SStatus 113)
[17179573.964000] ata2: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c68 86:3a01 87:4003 88:407f
[17179573.964000] ata2: dev 0 ATA-7, max UDMA/133, 160086528 sectors: LBA
[17179573.964000] nv_sata: Primary device removed
[17179573.964000] nv_sata: Secondary device added
[17179573.964000] nv_sata: Secondary device removed
[17179573.972000] ata2: dev 0 configured for UDMA/133
[17179573.972000] scsi1 : sata_nv
[17179573.972000] Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5
[17179573.972000] Type: Direct-Access ANSI SCSI revision: 05
[17179573.972000] NFORCE2-U400R: IDE controller at PCI slot 0000:00:09.0
[17179573.972000] NFORCE2-U400R: chipset revision 163
[17179573.972000] NFORCE2-U400R: not 100% native mode: will probe irqs later
[17179573.972000] NFORCE2-U400R: 0000:00:09.0 (rev a3) UDMA133 controller
[17179573.972000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179573.972000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179573.972000] Probing IDE interface ide0...
[17179573.988000] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
[17179573.988000] sda: Write Protect is off
[17179573.988000] sda: Mode Sense: 00 3a 00 00
[17179573.988000] SCSI device sda: drive cache: write back
[17179573.988000] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
[17179573.988000] sda: Write Protect is off
[17179573.988000] sda: Mode Sense: 00 3a 00 00
[17179573.988000] SCSI device sda: drive cache: write back
[17179573.988000] sda: sda1
[17179574.012000] sd 1:0:0:0: Attached scsi disk sda
[17179574.260000] hda: MAXTOR 6L040J2, ATA DISK drive
[17179574.540000] hdb: MAXTOR 6L040J2, ATA DISK drive
[17179574.596000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.612000] Probing IDE interface ide1...
[17179575.348000] hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[17179576.132000] hdd: Hewlett-Packard DVD Writer 300, ATAPI CD/DVD-ROM drive
[17179576.188000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.204000] hda: max request size: 128KiB
[17179576.216000] hda: Host Protected Area detected.
[17179576.216000] current capacity is 78175679 sectors (40025 MB)
[17179576.216000] native capacity is 78177792 sectors (40027 MB)
[17179576.224000] hda: Host Protected Area disabled.
[17179576.224000] hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63, UDMA(33)
[17179576.224000] hda: cache flushes supported
[17179576.224000] hda: hda1 hda2 < hda5 >
[17179576.252000] hdb: max request size: 128KiB
[17179576.252000] hdb: Host Protected Area detected.
[17179576.252000] current capacity is 78175679 sectors (40025 MB)
[17179576.252000] native capacity is 78177792 sectors (40027 MB)
[17179576.256000] hdb: Host Protected Area disabled.
[17179576.256000] hdb: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(33)
[17179576.256000] hdb: cache flushes supported
[17179576.256000] hdb: hdb1
[17179576.296000] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.296000] Uniform CD-ROM driver Revision: 3.20
[17179576.304000] hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.700000] usbcore: registered new driver usbfs
[17179576.700000] usbcore: registered new driver hub
[17179576.728000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[17179576.728000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 185
[17179576.728000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179576.728000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179576.728000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[17179576.728000] ehci_hcd 0000:00:02.2: debug port 1
[17179576.728000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179576.728000] ehci_hcd 0000:00:02.2: irq 185, io mem 0xd6204000
[17179576.728000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.728000] usb usb1: configuration #1 chosen from 1 choice
[17179576.728000] hub 1-0:1.0: USB hub found
[17179576.728000] hub 1-0:1.0: 8 ports detected
[17179576.728000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179576.840000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[17179576.840000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, high) -> IRQ 193
[17179576.840000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179576.840000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179576.840000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[17179576.868000] ohci_hcd 0000:00:02.0: irq 193, io mem 0xd6202000
[17179576.924000] usb usb2: configuration #1 chosen from 1 choice
[17179576.924000] hub 2-0:1.0: USB hub found
[17179576.924000] hub 2-0:1.0: 4 ports detected
[17179577.028000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[17179577.028000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 185
[17179577.028000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179577.028000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179577.028000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[17179577.056000] ohci_hcd 0000:00:02.1: irq 185, io mem 0xd6203000
[17179577.112000] usb usb3: configuration #1 chosen from 1 choice
[17179577.112000] hub 3-0:1.0: USB hub found
[17179577.112000] hub 3-0:1.0: 4 ports detected
[17179577.276000] Attempting manual resume
[17179577.304000] kjournald starting. Commit interval 5 seconds
[17179577.304000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.504000] usb 2-1: new full speed USB device using ohci_hcd and address 2
[17179577.720000] usb 2-1: configuration #1 chosen from 1 choice
[17179578.028000] usb 3-1: new low speed USB device using ohci_hcd and address 2
[17179578.240000] usb 3-1: configuration #1 chosen from 1 choice
[17179588.520000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[17179588.520000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
[17179588.664000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.692000] agpgart: Detected NVIDIA nForce2 chipset
[17179588.700000] agpgart: AGP aperture is 64M @ 0xd0000000
[17179588.944000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.956000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179589.208000] input: PC Speaker as /class/input/input1
[17179589.680000] usbcore: registered new driver hiddev
[17179589.696000] input: Logitech USB Receiver as /class/input/input2
[17179589.696000] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.1-1
[17179589.716000] input: Logitech USB Receiver as /class/input/input3
[17179589.716000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-1
[17179589.716000] usbcore: registered new driver usbhid
[17179589.716000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179589.732000] parport: PnPBIOS parport detected.
[17179589.732000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179589.776000] Linux video capture interface: v1.00
[17179589.832000] Floppy drive(s): fd0 is 1.44M
[17179589.848000] FDC 0 is a post-1991 82077
[17179589.908000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[17179589.908000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 193
[17179589.908000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179590.076000] ts: Compaq touchscreen protocol output
[17179590.184000] usbcore: registered new driver libusual
[17179590.208000] 8139too Fast Ethernet driver 0.9.27
[17179590.220000] bttv: driver version 0.9.16 loaded
[17179590.220000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179590.228000] intel8x0_measure_ac97_clock: measured 54482 usecs
[17179590.228000] intel8x0: clocking to 48000
[17179590.228000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[17179590.228000] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 201
[17179590.228000] eth0: RealTek RTL8139 at 0xf893c000, 00:0f:ea:bc:7d:11, IRQ 201
[17179590.228000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[17179590.236000] bttv: Bt8xx card found (0).
[17179590.236000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[17179590.236000] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 209
[17179590.236000] bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 209, latency: 32, mmio: 0xd6100000
[17179590.236000] bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
[17179590.236000] bttv0: using: Twinhan DST + clones [card=113,autodetected]
[17179590.236000] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[17179590.236000] bttv0: using tuner=4
[17179590.248000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179590.300000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[17179590.348000] Initializing USB Mass Storage driver...
[17179590.348000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179590.348000] usbcore: registered new driver usb-storage
[17179590.348000] USB Mass Storage support registered.
[17179590.348000] usb-storage: device found at 2
[17179590.348000] usb-storage: waiting for device to settle before scanning
[17179590.408000] bttv0: add subdevice "dvb0"
[17179590.504000] bt878: AUDIO driver version 0.0.0 loaded
[17179590.504000] bt878: Bt878 AUDIO function found (0).
[17179590.504000] ACPI: PCI Interrupt 0000:01:09.1[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 209
[17179590.504000] bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
[17179590.504000] bt878(0): Bt878 (rev 17) at 01:09.1, irq: 209, latency: 32, memory: 0xd6101000
[17179590.544000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17179590.668000] lp0: using parport0 (interrupt-driven).
[17179590.692000] Adding 1614492k swap on /dev/disk/by-uuid/4618fb3c-f5e8-4bb9-9afa-457cff2f920d. Priority:-1 extents:1 across:1614492k
[17179590.744000] EXT3 FS on hda1, internal journal
[17179591.588000] NET: Registered protocol family 17
[17179591.816000] NET: Registered protocol family 10
[17179591.816000] lo: Disabled Privacy Extensions
[17179591.816000] IPv6 over IPv4 tunneling driver
[17179595.348000] usb-storage: device scan complete
[17179595.356000] Vendor: Generic Model: Flash R/W Rev: 2002
[17179595.356000] Type: Direct-Access ANSI SCSI revision: 02
[17179595.360000] Vendor: Generic Model: Flash R/W Rev: 2002
[17179595.360000] Type: Direct-Access ANSI SCSI revision: 02
[17179595.368000] Vendor: Generic Model: Flash R/W Rev: 2002
[17179595.368000] Type: Direct-Access ANSI SCSI revision: 02
[17179595.376000] Vendor: Generic Model: Flash R/W Rev: 2002
[17179595.376000] Type: Direct-Access ANSI SCSI revision: 02
[17179595.408000] sd 2:0:0:0: Attached scsi removable disk sdb
[17179595.408000] sd 2:0:0:0: Attached scsi generic sg1 type 0
[17179595.444000] sd 2:0:0:1: Attached scsi removable disk sdc
[17179595.444000] sd 2:0:0:1: Attached scsi generic sg2 type 0
[17179595.484000] SCSI device sdd: 499712 512-byte hdwr sectors (256 MB)
[17179595.488000] sdd: Write Protect is off
[17179595.488000] sdd: Mode Sense: 03 00 00 00
[17179595.488000] sdd: assuming drive cache: write through
[17179595.508000] SCSI device sdd: 499712 512-byte hdwr sectors (256 MB)
[17179595.516000] sdd: Write Protect is off
[17179595.516000] sdd: Mode Sense: 03 00 00 00
[17179595.516000] sdd: assuming drive cache: write through
[17179595.516000] sdd: sdd1
[17179595.536000] sd 2:0:0:2: Attached scsi removable disk sdd
[17179595.536000] sd 2:0:0:2: Attached scsi generic sg3 type 0
[17179595.568000] sd 2:0:0:3: Attached scsi removable disk sde
[17179595.568000] sd 2:0:0:3: Attached scsi generic sg4 type 0
[17179596.384000] ACPI: Power Button (FF) [PWRF]
[17179596.384000] ACPI: Power Button (CM) [PWRB]
[17179596.496000] ibm_acpi: ec object not found
[17179596.524000] pcc_acpi: loading...
[17179598.588000] [drm] Initialized drm 1.0.1 20051102
[17179598.604000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179598.604000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 217
[17179598.604000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[17179599.808000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179599.808000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179599.808000] agpgart: Putting AGP V3 device at 0000:02:00.0 into 4x mode
[17179602.480000] eth0: no IPv6 routers present
[17179602.680000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179602.680000] apm: overridden by ACPI.
[17179608.156000] [drm] Setting GART location based on new memory map
[17179608.156000] [drm] Loading R300 Microcode
[17179608.156000] [drm] writeback test succeeded in 1 usecs
[17179611.416000] Bluetooth: Core ver 2.8
[17179611.416000] NET: Registered protocol family 31
[17179611.416000] Bluetooth: HCI device and connection manager initialized
[17179611.416000] Bluetooth: HCI socket layer initialized
[17179611.484000] Bluetooth: L2CAP ver 2.8
[17179611.484000] Bluetooth: L2CAP socket layer initialized
[17179611.528000] Bluetooth: RFCOMM socket layer initialized
[17179611.528000] Bluetooth: RFCOMM TTY layer initialized
[17179611.528000] Bluetooth: RFCOMM ver 1.7
[17179617.904000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17182226.324000] cx2388x dvb driver version 0.0.5 loaded
[17182486.416000] ISO 9660 Extensions: Microsoft Joliet Level 1
[17182486.420000] ISOFS: changing to secondary root
[17183779.220000] [drm:drm_unlock] *ERROR* Process 10188 using kernel context 0