rendered paste bodysmartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3802110A
Serial Number: 5LRB2JLM
Firmware Version: 3.AAJ
User Capacity: 80,026,361,856 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Apr 25 18:03:58 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 27) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 071 071 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 11
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 077 066 030 Pre-fail Always - 56380512
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1530
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 16
187 Unknown_Attribute 0x0032 032 032 000 Old_age Always - 68
189 Unknown_Attribute 0x003a 098 098 000 Old_age Always - 2
190 Unknown_Attribute 0x0022 069 059 045 Old_age Always - 555286559
194 Temperature_Celsius 0x0022 031 041 000 Old_age Always - 31 (Lifetime Min/Max 0/19)
195 Hardware_ECC_Recovered 0x001a 046 045 000 Old_age Always - 46655164
197 Current_Pending_Sector 0x0012 097 097 000 Old_age Always - 67
198 Offline_Uncorrectable 0x0010 097 097 000 Old_age Offline - 67
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 68 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 68 occurred at disk power-on lifetime: 1436 hours (59 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5d fe c5 e0 Error: UNC at LBA = 0x00c5fe5d = 12975709
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 57 fe c5 e0 00 06:08:50.979 READ DMA EXT
35 00 10 7f 00 18 e0 00 06:08:50.978 WRITE DMA EXT
35 00 28 4f 00 18 e0 00 06:08:50.978 WRITE DMA EXT
35 00 08 4f 00 90 e0 00 06:08:50.978 WRITE DMA EXT
35 00 20 4f 00 b0 e0 00 06:08:50.978 WRITE DMA EXT
Error 67 occurred at disk power-on lifetime: 1436 hours (59 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5d fe c5 e0 Error: UNC at LBA = 0x00c5fe5d = 12975709
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 57 fe c5 e0 00 06:08:40.157 READ DMA EXT
25 00 08 4f fe c5 e0 00 06:08:40.149 READ DMA EXT
25 00 08 47 fe c5 e0 00 06:08:40.146 READ DMA EXT
25 00 08 3f fe c5 e0 00 06:08:48.856 READ DMA EXT
25 00 08 d7 86 ad e0 00 06:08:48.856 READ DMA EXT
Error 66 occurred at disk power-on lifetime: 1436 hours (59 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5d fe c5 e0 Error: UNC at LBA = 0x00c5fe5d = 12975709
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 50 57 fe c5 e0 00 06:08:40.157 READ DMA EXT
25 00 58 4f fe c5 e0 00 06:08:40.149 READ DMA EXT
25 00 60 47 fe c5 e0 00 06:08:40.146 READ DMA EXT
25 00 68 3f fe c5 e0 00 06:08:40.135 READ DMA EXT
25 00 98 27 e5 c5 e0 00 06:08:40.135 READ DMA EXT
Error 65 occurred at disk power-on lifetime: 1436 hours (59 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5d fe c5 e0 Error: UNC at LBA = 0x00c5fe5d = 12975709
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 58 4f fe c5 e0 00 06:08:40.157 READ DMA EXT
25 00 60 47 fe c5 e0 00 06:08:40.149 READ DMA EXT
25 00 68 3f fe c5 e0 00 06:08:40.146 READ DMA EXT
25 00 98 27 e5 c5 e0 00 06:08:40.135 READ DMA EXT
25 00 00 27 e4 c5 e0 00 06:08:40.135 READ DMA EXT
Error 64 occurred at disk power-on lifetime: 1436 hours (59 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5d fe c5 e0 Error: UNC at LBA = 0x00c5fe5d = 12975709
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 60 47 fe c5 e0 00 06:08:40.157 READ DMA EXT
25 00 68 3f fe c5 e0 00 06:08:40.149 READ DMA EXT
25 00 98 27 e5 c5 e0 00 06:08:40.146 READ DMA EXT
25 00 00 27 e4 c5 e0 00 06:08:40.135 READ DMA EXT
25 00 00 27 e3 c5 e0 00 06:08:40.135 READ DMA EXT
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.