All pastes #455652 Raw Edit

Untitled

public text v1 · immutable
·published 2007-04-24 10:48 UTC
rendered paste body
[17179569.184000] Linux version 2.6.17-11-386 (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Tue Mar 13 23:30:30 UTC 2007 (Ubuntu 2.6.17-11.37-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000007fe30000 (usable)
[17179569.184000]  BIOS-e820: 000000007fe30000 - 000000007fe3f3d1 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000007ff10000 - 000000007ff30000 (reserved)
[17179569.184000]  BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[17179569.184000] 1150MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 523824
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 294448 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f61b0
[17179569.184000] ACPI: RSDT (v001 INTEL  D875BZLK 0x20050331 MSFT 0x00000097) @ 0x7ff30000
[17179569.184000] ACPI: FADT (v002 INTEL  D875BZLK 0x20050331 MSFT 0x00000097) @ 0x7ff30200
[17179569.184000] ACPI: MADT (v001 INTEL  D875BZLK 0x20050331 MSFT 0x00000097) @ 0x7ff30300
[17179569.184000] ACPI: ASF! (v016 LEGEND I865PASF 0x00000001 MSFT 0x0100000d) @ 0x7ff34490
[17179569.184000] ACPI: WDDT (v001 INTEL  OEMWDDT  0x00000001 MSFT 0x0100000d) @ 0x7ff34529
[17179569.184000] ACPI: DSDT (v001 INTEL  D875BZLK 0x00000001 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:2 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ecf0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=32f71dd8-140b-407c-b3b5-49dfcd09b53b ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2593.903 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.764000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179572.764000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.820000] Memory: 2065216k/2095296k available (1829k kernel code, 28788k reserved, 1041k data, 288k init, 1177792k highmem)
[17179572.820000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.900000] Calibrating delay using timer specific routine.. 5191.94 BogoMIPS (lpj=10383890)
[17179572.900000] Security Framework v1.0.0 initialized
[17179572.900000] SELinux:  Disabled at boot.
[17179572.900000] Mount-cache hash table entries: 512
[17179572.900000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179572.900000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[17179572.900000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179572.900000] CPU: L2 cache: 512K
[17179572.900000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[17179572.900000] CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
[17179572.900000] Checking 'hlt' instruction... OK.
[17179572.916000] SMP alternatives: switching to UP code
[17179572.916000] Freeing SMP alternatives: 0k freed
[17179572.916000] checking if image is initramfs... it is
[17179573.596000] Freeing initrd memory: 8016k freed
[17179573.596000] ACPI: Core revision 20060707
[17179573.596000] ACPI: Looking for DSDT ... not found!
[17179573.600000] ENABLING IO-APIC IRQs
[17179573.600000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.744000] NET: Registered protocol family 16
[17179573.744000] EISA bus registered
[17179573.744000] ACPI: bus type pci registered
[17179573.744000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[17179573.744000] PCI: Using configuration type 1
[17179573.744000] Setting up standard PCI resources
[17179573.756000] ACPI: Interpreter enabled
[17179573.756000] ACPI: Using IOAPIC for interrupt routing
[17179573.756000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.756000] PCI: Probing PCI hardware (bus 00)
[17179573.756000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[17179573.756000] PCI quirk: region 0500-053f claimed by ICH4 GPIO
[17179573.756000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179573.760000] Boot video device is 0000:01:00.0
[17179573.760000] PCI: Transparent bridge - 0000:00:1e.0
[17179573.760000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.760000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179573.760000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[17179573.760000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[17179573.764000] ACPI: Power Resource [URP1] (off)
[17179573.764000] ACPI: Power Resource [FDDP] (off)
[17179573.764000] ACPI: Power Resource [LPTP] (off)
[17179573.764000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179573.764000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[17179573.768000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[17179573.768000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179573.768000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.768000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.768000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179573.768000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179573.768000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.768000] pnp: PnP ACPI init
[17179573.772000] pnp: PnP ACPI: found 13 devices
[17179573.772000] PnPBIOS: Disabled by ACPI PNP
[17179573.772000] PCI: Using ACPI for IRQ routing
[17179573.772000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179573.776000] pnp: 00:0b: ioport range 0x400-0x47f could not be reserved
[17179573.776000] pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
[17179573.776000] pnp: 00:0b: ioport range 0x500-0x53f has been reserved
[17179573.776000] PCI: Bridge: 0000:00:01.0
[17179573.776000]   IO window: 9000-9fff
[17179573.776000]   MEM window: ff800000-ff8fffff
[17179573.776000]   PREFETCH window: e8000000-f7ffffff
[17179573.776000] PCI: Bridge: 0000:00:03.0
[17179573.776000]   IO window: a000-afff
[17179573.776000]   MEM window: ff900000-ff9fffff
[17179573.776000]   PREFETCH window: disabled.
[17179573.776000] PCI: Bridge: 0000:00:1e.0
[17179573.776000]   IO window: b000-bfff
[17179573.776000]   MEM window: disabled.
[17179573.776000]   PREFETCH window: disabled.
[17179573.776000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179573.776000] NET: Registered protocol family 2
[17179573.816000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.816000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179573.816000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.816000] TCP: Hash tables configured (established 262144 bind 65536)
[17179573.816000] TCP reno registered
[17179573.816000] audit: initializing netlink socket (disabled)
[17179573.816000] audit(1177422048.816:1): initialized
[17179573.816000] highmem bounce pool size: 64 pages
[17179573.816000] VFS: Disk quotas dquot_6.5.1
[17179573.816000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.816000] Initializing Cryptographic API
[17179573.816000] io scheduler noop registered
[17179573.816000] io scheduler anticipatory registered
[17179573.816000] io scheduler deadline registered
[17179573.816000] io scheduler cfq registered (default)
[17179573.816000] isapnp: Scanning for PnP cards...
[17179574.172000] isapnp: No Plug & Play device found
[17179574.188000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179574.188000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.192000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179574.192000] mice: PS/2 mouse device common for all mice
[17179574.192000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179574.192000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179574.192000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179574.192000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179574.192000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179574.192000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179574.192000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179574.196000] EISA: Probing bus 0 at eisa.0
[17179574.196000] EISA: Detected 0 cards.
[17179574.196000] TCP bic registered
[17179574.196000] NET: Registered protocol family 1
[17179574.196000] NET: Registered protocol family 8
[17179574.196000] NET: Registered protocol family 20
[17179574.196000] Using IPI Shortcut mode
[17179574.196000] ACPI: (supports S0 S1 S4 S5)
[17179574.196000] Freeing unused kernel memory: 288k freed
[17179574.380000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179575.420000] Capability LSM initialized
[17179575.436000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179575.464000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179575.464000] ACPI: Getting cpuindex for acpiid 0x2
[17179575.936000] usbcore: registered new driver usbfs
[17179575.936000] usbcore: registered new driver hub
[17179575.936000] USB Universal Host Controller Interface driver v3.0
[17179575.936000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179575.936000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179575.936000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179575.936000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179575.936000] uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000cc00
[17179575.936000] usb usb1: configuration #1 chosen from 1 choice
[17179575.936000] hub 1-0:1.0: USB hub found
[17179575.936000] hub 1-0:1.0: 2 ports detected
[17179576.100000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
[17179576.100000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179576.100000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179576.100000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179576.100000] uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000d000
[17179576.104000] usb usb2: configuration #1 chosen from 1 choice
[17179576.104000] hub 2-0:1.0: USB hub found
[17179576.104000] hub 2-0:1.0: 2 ports detected
[17179576.108000] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4
[17179576.108000] Copyright (c) 1999-2006 Intel Corporation.
[17179576.108000] SCSI subsystem initialized
[17179576.112000] libata version 1.20 loaded.
[17179576.128000] Floppy drive(s): fd0 is 1.44M
[17179576.148000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179576.148000] md: bitmap version 4.39
[17179576.148000] md: linear personality registered for level -1
[17179576.152000] md: multipath personality registered for level -4
[17179576.156000] md: raid0 personality registered for level 0
[17179576.160000] md: raid1 personality registered for level 1
[17179576.172000] raid5: automatically using best checksumming function: pIII_sse
[17179576.192000]    pIII_sse  :  3422.000 MB/sec
[17179576.192000] raid5: using function: pIII_sse (3422.000 MB/sec)
[17179576.200000] FDC 0 is a post-1991 82077
[17179576.204000] md: raid5 personality registered for level 5
[17179576.204000] md: raid4 personality registered for level 4
[17179576.208000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179576.208000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179576.208000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179576.208000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179576.208000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000d400
[17179576.208000] usb usb3: configuration #1 chosen from 1 choice
[17179576.208000] hub 3-0:1.0: USB hub found
[17179576.208000] hub 3-0:1.0: 2 ports detected
[17179576.276000] raid6: int32x1    757 MB/s
[17179576.344000] raid6: int32x2    758 MB/s
[17179576.412000] raid6: int32x4    722 MB/s
[17179576.480000] raid6: int32x8    485 MB/s
[17179576.548000] raid6: mmxx1     1993 MB/s
[17179576.616000] raid6: mmxx2     2659 MB/s
[17179576.684000] raid6: sse1x1    1242 MB/s
[17179576.752000] raid6: sse1x2    2346 MB/s
[17179576.820000] raid6: sse2x1    1904 MB/s
[17179576.888000] raid6: sse2x2    2939 MB/s
[17179576.888000] raid6: using algorithm sse2x2 (2939 MB/s)
[17179576.888000] md: raid6 personality registered for level 6
[17179576.888000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
[17179576.888000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179576.888000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179576.888000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[17179576.888000] ehci_hcd 0000:00:1d.7: debug port 1
[17179576.888000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179576.888000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xffa00000
[17179576.892000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.892000] usb usb4: configuration #1 chosen from 1 choice
[17179576.892000] hub 4-0:1.0: USB hub found
[17179576.892000] hub 4-0:1.0: 8 ports detected
[17179576.896000] md: raid10 personality registered for level 10
[17179576.996000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179576.996000] PCI: Setting latency timer of device 0000:02:01.0 to 64
[17179577.148000] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:3a:bc:a7
[17179577.388000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[17179577.388000] ata_piix 0000:00:1f.2: version 1.05
[17179577.388000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185
[17179577.388000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179577.388000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 185
[17179577.388000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 185
[17179577.552000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:207f
[17179577.552000] ata1: dev 0 ATA-7, max UDMA/133, 160086528 sectors: LBA
[17179577.560000] ata1: dev 0 configured for UDMA/133
[17179577.560000] scsi0 : ata_piix
[17179577.724000] ata2: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 88:207f
[17179577.724000] ata2: dev 0 ATA-7, max UDMA/133, 390721968 sectors: LBA48
[17179577.732000] ata2: dev 0 configured for UDMA/133
[17179577.732000] scsi1 : ata_piix
[17179577.732000]   Vendor: ATA       Model: Maxtor 6Y080M0    Rev: YAR5
[17179577.732000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179577.732000]   Vendor: ATA       Model: WDC WD2000JS-00M  Rev: 02.0
[17179577.732000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179577.736000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[17179577.736000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[17179577.736000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
[17179577.736000] ICH5: chipset revision 2
[17179577.736000] ICH5: not 100% native mode: will probe irqs later
[17179577.736000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[17179577.736000]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
[17179577.736000] Probing IDE interface ide0...
[17179577.760000] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
[17179577.764000] sda: Write Protect is off
[17179577.764000] sda: Mode Sense: 00 3a 00 00
[17179577.764000] SCSI device sda: drive cache: write back
[17179577.764000] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
[17179577.764000] sda: Write Protect is off
[17179577.764000] sda: Mode Sense: 00 3a 00 00
[17179577.764000] SCSI device sda: drive cache: write back
[17179577.764000]  sda: sda1
[17179577.768000] sd 0:0:0:0: Attached scsi disk sda
[17179577.768000] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[17179577.768000] sdb: Write Protect is off
[17179577.768000] sdb: Mode Sense: 00 3a 00 00
[17179577.768000] SCSI device sdb: drive cache: write back
[17179577.768000] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[17179577.768000] sdb: Write Protect is off
[17179577.768000] sdb: Mode Sense: 00 3a 00 00
[17179577.768000] SCSI device sdb: drive cache: write back
[17179577.768000]  sdb: sdb1 sdb2 < sdb5 >
[17179577.796000] sd 1:0:0:0: Attached scsi disk sdb
[17179577.800000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179577.800000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[17179577.952000] usb 4-4: new high speed USB device using ehci_hcd and address 4
[17179578.084000] usb 4-4: configuration #1 chosen from 1 choice
[17179578.120000] kjournald starting.  Commit interval 5 seconds
[17179578.120000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.268000] usbcore: registered new driver libusual
[17179578.476000] hda: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive
[17179578.508000] usb 1-1: new full speed USB device using uhci_hcd and address 3
[17179578.680000] usb 1-1: configuration #1 chosen from 1 choice
[17179578.924000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[17179579.036000] Initializing USB Mass Storage driver...
[17179579.100000] usb 2-1: configuration #1 chosen from 1 choice
[17179579.260000] hdb: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
[17179579.316000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179579.320000] Probing IDE interface ide1...
[17179579.344000] usb 3-2: new low speed USB device using uhci_hcd and address 2
[17179579.520000] usb 3-2: configuration #1 chosen from 1 choice
[17179579.524000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179579.524000] usb-storage: device found at 4
[17179579.524000] usb-storage: waiting for device to settle before scanning
[17179579.524000] usbcore: registered new driver usb-storage
[17179579.524000] USB Mass Storage support registered.
[17179579.888000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
[17179579.888000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179579.888000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179579.888000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[17179579.888000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000d800
[17179579.888000] usb usb5: configuration #1 chosen from 1 choice
[17179579.888000] hub 5-0:1.0: USB hub found
[17179579.888000] hub 5-0:1.0: 2 ports detected
[17179584.524000] usb-storage: device scan complete
[17179584.524000]   Vendor: Hitachi   Model: HDT725025VLAT80   Rev: V5DO
[17179584.524000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[17179584.524000] SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
[17179584.524000] sdc: Write Protect is off
[17179584.524000] sdc: Mode Sense: 53 00 00 08
[17179584.524000] sdc: assuming drive cache: write through
[17179584.524000] SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
[17179584.528000] sdc: Write Protect is off
[17179584.528000] sdc: Mode Sense: 53 00 00 08
[17179584.528000] sdc: assuming drive cache: write through
[17179584.528000]  sdc: sdc1
[17179584.536000] sd 2:0:0:0: Attached scsi disk sdc
[17179584.536000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[17179586.320000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
[17179587.600000] NET: Registered protocol family 17
[17179587.932000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.044000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.056000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.072000] hw_random hardware driver 1.0.0 loaded
[17179588.084000] Real Time Clock Driver v1.12ac
[17179588.092000] iforce.c: info ( cmd = ff01, data = 43 )
[17179588.096000] agpgart: Detected an Intel i875 Chipset.
[17179588.096000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179588.096000] iforce.c: info ( cmd = ff03, data = 45 00 01 )
[17179588.100000] iforce.c: info ( cmd = ff01, data = 4f )
[17179588.100000] iforce.c: info ( cmd = ff04, data = 56 02 04 00 )
[17179588.100000] input: Logitech WingMan Formula Force as /class/input/input1
[17179588.100000] iforce->dev->open = f89fdde0
[17179588.100000] usbcore: registered new driver iforce
[17179588.104000] usbcore: registered new driver hiddev
[17179588.236000] input: PC Speaker as /class/input/input2
[17179588.664000] parport: PnPBIOS parport detected.
[17179588.664000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[17179588.716000] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179588.716000] Uniform CD-ROM driver Revision: 3.20
[17179588.764000] hdb: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179589.080000] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 17 (level, low) -> IRQ 201
[17179589.080000] Model 100a Rev 00000000 Serial 100a1102
[17179598.128000] drivers/usb/input/hid-core.c: timeout initializing reports
[17179598.128000] input: Logitech Inc. WingMan Force 3D as /class/input/input3
[17179598.128000] input: USB HID v1.00 Joystick [Logitech Inc. WingMan Force 3D] on usb-0000:00:1d.1-1
[17179598.148000] input: Razer Razer Diamonback Optical Mouse as /class/input/input4
[17179598.148000] input: USB HID v1.10 Mouse [Razer Razer Diamonback Optical Mouse] on usb-0000:00:1d.2-2
[17179598.148000] usbcore: registered new driver usbhid
[17179598.148000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179598.292000] ts: Compaq touchscreen protocol output
[17179598.416000] lp0: using parport0 (interrupt-driven).
[17179598.512000] Adding 7598704k swap on /dev/disk/by-uuid/e7b0ad3e-e6f3-4e83-bc1a-f6c390759377.  Priority:-1 extents:1 across:7598704k
[17179598.584000] EXT3 FS on sdb1, internal journal
[17179598.816000] NET: Registered protocol family 10
[17179598.816000] lo: Disabled Privacy Extensions
[17179598.816000] IPv6 over IPv4 tunneling driver
[17179599.932000] Adding 7598704k swap on /dev/disk/by-uuid/e7b0ad3e-e6f3-4e83-bc1a-f6c390759377.  Priority:-2 extents:1 across:7598704k
[17179605.444000] ACPI: Power Button (FF) [PWRF]
[17179605.444000] ACPI: Sleep Button (CM) [SLPB]
[17179605.564000] ibm_acpi: ec object not found
[17179605.596000] pcc_acpi: loading...
[17179605.960000] acpi_cpufreq: Unknown symbol cpu_online_map
[17179609.752000] eth0: no IPv6 routers present
[17179614.568000] [drm] Initialized drm 1.0.1 20051102
[17179614.576000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179614.576000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[17179616.352000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179616.352000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179616.352000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[17179616.648000] [drm] Setting GART location based on new memory map
[17179616.648000] [drm] Loading R300 Microcode
[17179616.648000] [drm] writeback test succeeded in 1 usecs
[17179616.836000] ppdev: user-space parallel port driver
[17179617.112000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179617.112000] apm: overridden by ACPI.
[17179617.276000] Bluetooth: Core ver 2.8
[17179617.276000] NET: Registered protocol family 31
[17179617.276000] Bluetooth: HCI device and connection manager initialized
[17179617.276000] Bluetooth: HCI socket layer initialized
[17179617.284000] Bluetooth: L2CAP ver 2.8
[17179617.284000] Bluetooth: L2CAP socket layer initialized
[17179617.296000] Bluetooth: RFCOMM socket layer initialized
[17179617.296000] Bluetooth: RFCOMM TTY layer initialized
[17179617.296000] Bluetooth: RFCOMM ver 1.7
[17179628.316000] eth0: no IPv6 routers present