Advertising
- flithm
- Monday, April 23rd, 2007 at 4:03:18pm UTC
- [email protected]:~$ sudo /etc/init.d/networking restart
- * Reconfiguring network interfaces... RTNETLINK answers: No such process
- There is already a pid file /var/run/dhclient.eth0.pid with pid 134993416
- Internet Systems Consortium DHCP Client V3.0.4
- Copyright 2004-2006 Internet Systems Consortium.
- All rights reserved.
- For info, please visit http://www.isc.org/sw/dhcp/
- wifi0: unknown hardware address type 801
- wifi0: unknown hardware address type 801
- Listening on LPF/eth0/00:a0:d1:4b:66:f1
- Sending on LPF/eth0/00:a0:d1:4b:66:f1
- Sending on Socket/fallback
- DHCPRELEASE on eth0 to 10.11.12.1 port 67
- There is already a pid file /var/run/dhclient.ath0.pid with pid 134993416
- Internet Systems Consortium DHCP Client V3.0.4
- Copyright 2004-2006 Internet Systems Consortium.
- All rights reserved.
- For info, please visit http://www.isc.org/sw/dhcp/
- wifi0: unknown hardware address type 801
- wifi0: unknown hardware address type 801
- Listening on LPF/ath0/00:16:e3:6b:85:d4
- Sending on LPF/ath0/00:16:e3:6b:85:d4
- Sending on Socket/fallback
- There is already a pid file /var/run/dhclient.eth0.pid with pid 134993416
- Internet Systems Consortium DHCP Client V3.0.4
- Copyright 2004-2006 Internet Systems Consortium.
- All rights reserved.
- For info, please visit http://www.isc.org/sw/dhcp/
- wifi0: unknown hardware address type 801
- wifi0: unknown hardware address type 801
- Listening on LPF/eth0/00:a0:d1:4b:66:f1
- Sending on LPF/eth0/00:a0:d1:4b:66:f1
- Sending on Socket/fallback
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
- DHCPOFFER from 10.11.12.1
- DHCPREQUEST on eth0 to 255.255.255.255 port 67
- DHCPACK from 10.11.12.1
- bound to 10.11.12.95 -- renewal in 42118 seconds.
- wlan0: ERROR while getting interface flags: No such device
- Error for wireless request "Set ESSID" (8B1A) :
- SET failed on device wlan0 ; No such device.
- wpa_supplicant: cannot read contents of managed
- run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1
- There is already a pid file /var/run/dhclient.wlan0.pid with pid 134993416
- Internet Systems Consortium DHCP Client V3.0.4
- Copyright 2004-2006 Internet Systems Consortium.
- All rights reserved.
- For info, please visit http://www.isc.org/sw/dhcp/
- wifi0: unknown hardware address type 801
- SIOCSIFADDR: No such device
- wlan0: ERROR while getting interface flags: No such device
- wlan0: ERROR while getting interface flags: No such device
- wifi0: unknown hardware address type 801
- Bind socket to interface: No such device
- Failed to bring up wlan0.
- Error for wireless request "Set Encode" (8B2A) :
- SET failed on device ath0 ; Invalid argument.
- There is already a pid file /var/run/dhclient.ath0.pid with pid 134993416
- Internet Systems Consortium DHCP Client V3.0.4
- Copyright 2004-2006 Internet Systems Consortium.
- All rights reserved.
- For info, please visit http://www.isc.org/sw/dhcp/
- wifi0: unknown hardware address type 801
- wifi0: unknown hardware address type 801
- Listening on LPF/ath0/00:16:e3:6b:85:d4
- Sending on LPF/ath0/00:16:e3:6b:85:d4
- Sending on Socket/fallback
- DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 3
- DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 7
- DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 7
- DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 14
- No DHCPOFFERS received.
- No working leases in persistent database - sleeping.
- [ OK ]
- [email protected]:~$ sudo /etc/init.d/networking restart
- Password:
- * Reconfiguring network interfaces... There is already a pid file /var/run/dhclient.eth0.pid with pid 12044
- killed old client process, removed PID file
- Internet Systems Consortium DHCP Client V3.0.4
- Copyright 2004-2006 Internet Systems Consortium.
- All rights reserved.
- For info, please visit http://www.isc.org/sw/dhcp/
- wifi0: unknown hardware address type 801
- wifi0: unknown hardware address type 801
- Listening on LPF/eth0/00:a0:d1:4b:66:f1
- Sending on LPF/eth0/00:a0:d1:4b:66:f1
- Sending on Socket/fallback
- DHCPRELEASE on eth0 to 10.11.12.1 port 67
- RTNETLINK answers: No such process
- There is already a pid file /var/run/dhclient.ath0.pid with pid 9542
- killed old client process, removed PID file
- Internet Systems Consortium DHCP Client V3.0.4
- Copyright 2004-2006 Internet Systems Consortium.
- All rights reserved.
- For info, please visit http://www.isc.org/sw/dhcp/
- wifi0: unknown hardware address type 801
- wifi0: unknown hardware address type 801
- Listening on LPF/ath0/00:16:e3:6b:85:d4
- Sending on LPF/ath0/00:16:e3:6b:85:d4
- Sending on Socket/fallback
- There is already a pid file /var/run/dhclient.eth0.pid with pid 134993416
- Internet Systems Consortium DHCP Client V3.0.4
- Copyright 2004-2006 Internet Systems Consortium.
- All rights reserved.
- For info, please visit http://www.isc.org/sw/dhcp/
- wifi0: unknown hardware address type 801
- wifi0: unknown hardware address type 801
- Listening on LPF/eth0/00:a0:d1:4b:66:f1
- Sending on LPF/eth0/00:a0:d1:4b:66:f1
- Sending on Socket/fallback
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
- DHCPOFFER from 10.11.12.1
- DHCPREQUEST on eth0 to 255.255.255.255 port 67
- DHCPACK from 10.11.12.1
- bound to 10.11.12.95 -- renewal in 42326 seconds.
- wlan0: ERROR while getting interface flags: No such device
- Error for wireless request "Set ESSID" (8B1A) :
- SET failed on device wlan0 ; No such device.
- wpa_supplicant: cannot read contents of managed
- run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1
- There is already a pid file /var/run/dhclient.wlan0.pid with pid 134993416
- Internet Systems Consortium DHCP Client V3.0.4
- Copyright 2004-2006 Internet Systems Consortium.
- All rights reserved.
- For info, please visit http://www.isc.org/sw/dhcp/
- wifi0: unknown hardware address type 801
- SIOCSIFADDR: No such device
- wlan0: ERROR while getting interface flags: No such device
- wlan0: ERROR while getting interface flags: No such device
- wifi0: unknown hardware address type 801
- Bind socket to interface: No such device
- Failed to bring up wlan0.
- Error for wireless request "Set Encode" (8B2A) :
- SET failed on device ath0 ; Invalid argument.
- There is already a pid file /var/run/dhclient.ath0.pid with pid 134993416
- Internet Systems Consortium DHCP Client V3.0.4
- Copyright 2004-2006 Internet Systems Consortium.
- All rights reserved.
- For info, please visit http://www.isc.org/sw/dhcp/
- wifi0: unknown hardware address type 801
- wifi0: unknown hardware address type 801
- Listening on LPF/ath0/00:16:e3:6b:85:d4
- Sending on LPF/ath0/00:16:e3:6b:85:d4
- Sending on Socket/fallback
- DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 4
- DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 11
- DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 14
- DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 2
- No DHCPOFFERS received.
- No working leases in persistent database - sleeping.
- [ OK ]
advertising
Update the Post
Either update this post and resubmit it with changes, or make a new post.
You may also comment on this post.
Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.