Stuff

zaptel.conf
--------------------
loadzone=us
defaultzone=us

span=1,1,3,esf,b8zs
fxols=1-8
fxsls=9-24

zapata.conf
---------------------
[channels]
signalling => fxo_ls
context => default
language => en
busydetect => no
hanguponpolarityswitch => no
callprogress => yes
channel => 1-8

signalling => fxs_ls
context => default
language => en
busydetect => no
hanguponpolarityswitch => no
callprogress => yes
channel => 9-24


wanpipe1.conf
---------------------
#================================================
# WANPIPE1 Configuration File
#================================================
#
# Date: Mon Mar 13 03:07:35 CST 2006
#
# Note: This file was generated automatically
#       by /usr/sbin/wancfg program.
#
#       If you want to edit this file, it is
#       recommended that you use wancfg program
#       to do so.
#================================================
# Sangoma Technologies Inc.
#================================================

[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
wag1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE 	= AFT
S514CPU 	= A
CommPort 	= PRI
AUTO_PCISLOT 	= NO
PCISLOT 	= 7
PCIBUS  	= 1
FE_MEDIA	= T1
FE_LCODE	= B8ZS
FE_FRAME	= ESF
FE_LINE		= 1
TE_CLOCK 	= NORMAL
TE_REF_CLOCK 	= 0
TE_HIGHIMPEDANCE	= NO
LBO 		= 0-110FT
FE_TXTRISTATE	= NO
MTU 		= 1500
UDPPORT 	= 9000
TTL		= 255
IGNORE_FRONT_END = NO
TDMV_SPAN	= 1
TDMV_DCHAN	= 0

[wag1]
ACTIVE_CH	= ALL
TDMV_ECHO_OFF	= NO
TDMV_HWEC	= YES