GNU gdb 6.4.90-debian
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i486-linux-gnu"...Using host libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1".
(gdb) run
Starting program: /home/ronny/local/kpilot-491/bin/kpilotDaemon --debug 99 --nofork
Failed to read a valid object file image from memory.
[Thread debugging using libthread_db enabled]
[New Thread -1232398656 (LWP 14965)]
>main
>getDebugLevel
Qt: gdb: -nograb added to command-line options.
Use the -dograb option to enforce grabbing.
main: Configuration version 443
>PilotDaemon
>setupPilotLink
>KPilotLink
>KPilotDeviceLink
KPilotDeviceLink: Pilot-link version: [1202]
>reloadSettings
>getPilotSpeed
getPilotSpeed: Speed set to PILOTRATE=9600 (0)
>setupPilotCodec
setupPilotCodec: Using codec name ISO8859-15
setupPilotCodec: Creating codec ISO8859-15
setupPilotCodec: Got codec ISO 8859-15
reloadSettings: Got configuration /dev/ttyUSB1
reloadSettings: Got conduit list vcal-conduit,sysinfo_conduit,abbrowser_conduit,todo-conduit,internal_fileinstall
>requestSync
! [bool SyncAction::SyncMode::setMode(int)]
! Bad sync mode 0 requested.
! [virtual void PilotDaemon::requestSync(int)]
! Ignored fake sync type 0
reloadSettings: Resetting with device /dev/ttyUSB1
>reset
>close
>stopCommThread
>reset
>close
>stopCommThread
>logError
>startCommThread
>stopCommThread
reloadSettings: Using workarounds 0
>run
run: Polling every: [1] seconds.
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
[New Thread -1235813456 (LWP 14968)]
>PilotDaemonTray
>setupWidget
>slotShowNotListening
>changeIcon
setupWidget: Finished getting icons
! [void fillConduitNameMap()]
! No service for vcal-conduit
! [void fillConduitNameMap()]
! No service for sysinfo_conduit
! [void fillConduitNameMap()]
! No service for abbrowser_conduit
! [void fillConduitNameMap()]
! No service for todo-conduit
>logProgress
>FileInstaller
>LogFile
! [bool SyncAction::SyncMode::setMode(int)]
! Bad sync mode 0 requested.
>statusString
PilotDaemon: The daemon is ready with status PilotDaemon=Waiting for sync; NextSync=HotSync (KPilotDeviceLink=PilotLinkError); (5)
>showTray
showTray: Tray icon displayed.
! [void fillConduitNameMap()]
! No service for vcal-conduit
! [void fillConduitNameMap()]
! No service for sysinfo_conduit
! [void fillConduitNameMap()]
! No service for abbrowser_conduit
! [void fillConduitNameMap()]
! No service for todo-conduit
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>slotShowNormal
>changeIcon
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
>showList
showList: Bound devices: [/dev/ttyUSB1]
open: Current status: [KPilotDeviceLink=DeviceOpen] and socket: [14]
open: Listening to pilot. Now trying accept...
>customEvent
>logProgress
open: Link accept done.
open: doing dlp_ReadSysInfo...
>customEvent
>logProgress
Program received signal SIGINT, Interrupt.
[Switching to Thread -1232398656 (LWP 14965)]
0xb7fa0410 in ?? ()
(gdb) thread apply all bt
Thread 2 (Thread -1235813456 (LWP 14968)):
#0 0xb6fe24eb in s_read (ps=0x8163920, buf=0x815f1a8, len=3, flags=0) at unixserial.c:449
#1 0xb7009675 in slp_rx (ps=0x8163920, buf=0x8148628, len=1030, flags=0) at slp.c:416
#2 0xb7000c08 in padp_tx (ps=0x8163920, buf=0x80c5538 "\022\001 \004", len=8, flags=0) at padp.c:276
#3 0xb700c0f3 in pi_send (pi_sd=14, msg=0x80c5538, len=8, flags=0) at socket.c:1273
#4 0xb700c1f1 in pi_write (pi_sd=14, msg=0x80c5538, len=8) at socket.c:1334
#5 0xb6fe9df4 in dlp_request_write (req=0x80efb58, sd=14) at dlp.c:620
#6 0xb6fe9f74 in dlp_exec (sd=14, req=0x80efb58, res=0xb656f1dc) at dlp.c:711
#7 0xb6feaa79 in dlp_ReadSysInfo (sd=14, s=0xb656f238) at dlp.c:981
#8 0xb765f50c in DeviceCommThread::open (this=0x80e4b98, device=@0x80ed450) at /home/ronny/tmp/kpilot/lib/kpilotdevicelink.cc:515
#9 0xb765fcfb in DeviceCommThread::openDevice (this=0x80e4b98) at /home/ronny/tmp/kpilot/lib/kpilotdevicelink.cc:342
#10 0xb765fefb in DeviceCommThread::run (this=0x80e4b98) at /home/ronny/tmp/kpilot/lib/kpilotdevicelink.cc:606
#11 0xb7a41194 in QThreadInstance::start (_arg=0x80e5544) at kernel/qthread_unix.cpp:119
#12 0xb7682240 in start_thread () from /lib/tls/i686/cmov/libpthread.so.0
#13 0xb6e603de in clone () from /lib/tls/i686/cmov/libc.so.6
Current language: auto; currently c
Thread 1 (Thread -1232398656 (LWP 14965)):
#0 0xb7fa0410 in ?? ()
#1 0xbfe91368 in ?? ()
#2 0x080be28c in ?? ()
#3 0x080be108 in ?? ()
#4 0xb6e59071 in select () from /lib/tls/i686/cmov/libc.so.6
#5 0xb79f02a8 in QEventLoop::processEvents (this=0x8090ce0, flags=4) at kernel/qeventloop_x11.cpp:291
#6 0xb7a63179 in QEventLoop::enterLoop (this=0x8090ce0) at kernel/qeventloop.cpp:198
#7 0xb7a62f9a in QEventLoop::exec (this=0x8090ce0) at kernel/qeventloop.cpp:145
#8 0xb7a4a7bf in QApplication::exec (this=0xbfe913f4) at kernel/qapplication.cpp:2758
#9 0x080796da in main (argc=134753264, argv=0xb6ec3760) at /home/ronny/tmp/kpilot/kpilot/pilotDaemon.cc:1400
(gdb)