GNU gdb 6.4.90-debian
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i486-linux-gnu"...Using host libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1".
(gdb) ri [Kun
Starting program: /home/ronny/local/kpilot-491/bin/kpilotDaemon --debug 99 --nofork
Failed to read a valid object file image from memory.
[Thread debugging using libthread_db enabled]
[New Thread -1232947520 (LWP 25041)]
>main
>getDebugLevel
Qt: gdb: -nograb added to command-line options.
Use the -dograb option to enforce grabbing.
main: Configuration version 443
>PilotDaemon
>setupPilotLink
>KPilotLink
>KPilotDeviceLink
KPilotDeviceLink: Pilot-link version: [1202]
>reloadSettings
>getPilotSpeed
getPilotSpeed: Speed set to PILOTRATE=9600 (0)
>setupPilotCodec
setupPilotCodec: Using codec name ISO8859-15
setupPilotCodec: Creating codec ISO8859-15
setupPilotCodec: Got codec ISO 8859-15
reloadSettings: Got configuration /dev/ttyUSB1
reloadSettings: Got conduit list vcal-conduit,sysinfo_conduit,abbrowser_conduit,todo-conduit,internal_fileinstall
>requestSync
! [bool SyncAction::SyncMode::setMode(int)]
! Bad sync mode 0 requested.
! [virtual void PilotDaemon::requestSync(int)]
! Ignored fake sync type 0
reloadSettings: Resetting with device /dev/ttyUSB1
>reset
>close
>stopCommThread
>reset
>close
>stopCommThread
>logError
>startCommThread
>stopCommThread
reloadSettings: Using workarounds 0
>run
run: Polling every: [1] seconds.
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [13]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
[New Thread -1236362320 (LWP 25044)]
>PilotDaemonTray
>setupWidget
>slotShowNotListening
>changeIcon
setupWidget: Finished getting icons
! [void fillConduitNameMap()]
! No service for vcal-conduit
! [void fillConduitNameMap()]
! No service for sysinfo_conduit
! [void fillConduitNameMap()]
! No service for abbrowser_conduit
! [void fillConduitNameMap()]
! No service for todo-conduit
>logProgress
>FileInstaller
>LogFile
! [bool SyncAction::SyncMode::setMode(int)]
! Bad sync mode 0 requested.
>statusString
PilotDaemon: The daemon is ready with status PilotDaemon=Waiting for sync; NextSync=HotSync (KPilotDeviceLink=PilotLinkError); (5)
>showTray
showTray: Tray icon displayed.
! [void fillConduitNameMap()]
! No service for vcal-conduit
! [void fillConduitNameMap()]
! No service for sysinfo_conduit
! [void fillConduitNameMap()]
! No service for abbrowser_conduit
! [void fillConduitNameMap()]
! No service for todo-conduit
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>slotShowNormal
>changeIcon
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
>showList
showList: Bound devices: [/dev/ttyUSB1]
open: Current status: [KPilotDeviceLink=DeviceOpen] and socket: [14]
open: Listening to pilot. Now trying accept...
>customEvent
>logProgress
open: Link accept done.
>customEvent
>logProgress
Program received signal SIGINT, Interrupt.
[Switching to Thread -1232947520 (LWP 25041)]
0xb7f1a410 in ?? ()
(gdb) run [K thread apply all bt
Thread 2 (Thread -1236362320 (LWP 25044)):
#0 0xb7f1a410 in ?? ()
#1 0xb64e8fa8 in ?? ()
#2 0x00000003 in ?? ()
#3 0x081641b8 in ?? ()
#4 0xb760182b in __read_nocancel () from /lib/tls/i686/cmov/libpthread.so.0
#5 0xb6f5c5ca in s_read (ps=0x81639b8, buf=0x80c0718, len=3, flags=0) at unixserial.c:463
#6 0xb6f83675 in slp_rx (ps=0x81639b8, buf=0x80dc008, len=1030, flags=0) at slp.c:416
#7 0xb6f7ac08 in padp_tx (ps=0x81639b8, buf=0x80c0800 "\022\001 \004", len=8, flags=0) at padp.c:276
#8 0xb6f860f3 in pi_send (pi_sd=14, msg=0x80c0800, len=8, flags=0) at socket.c:1273
#9 0xb6f861f1 in pi_write (pi_sd=14, msg=0x80c0800, len=8) at socket.c:1334
#10 0xb6f63df4 in dlp_request_write (req=0x80b6568, sd=14) at dlp.c:620
#11 0xb6f63f74 in dlp_exec (sd=14, req=0x80b6568, res=0xb64e91dc) at dlp.c:711
#12 0xb6f64a79 in dlp_ReadSysInfo (sd=14, s=0xb64e9238) at dlp.c:981
#13 0xb75d94cc in DeviceCommThread::open (this=0x80e4bc8, device=@0x80ed480) at /home/ronny/tmp/kpilot/lib/kpilotdevicelink.cc:513
#14 0xb75d9c3b in DeviceCommThread::openDevice (this=0x80e4bc8) at /home/ronny/tmp/kpilot/lib/kpilotdevicelink.cc:342
#15 0xb75d9e3b in DeviceCommThread::run (this=0x80e4bc8) at /home/ronny/tmp/kpilot/lib/kpilotdevicelink.cc:600
#16 0xb79bb194 in QThreadInstance::start (_arg=0x80e5574) at kernel/qthread_unix.cpp:119
#17 0xb75fc240 in start_thread () from /lib/tls/i686/cmov/libpthread.so.0
#18 0xb6dda3de in clone () from /lib/tls/i686/cmov/libc.so.6
Thread 1 (Thread -1232947520 (LWP 25041)):
#0 0xb7f1a410 in ?? ()
#1 0xbfb93068 in ?? ()
#2 0x080be2bc in ?? ()
#3 0x080be138 in ?? ()
#4 0xb6dd3071 in select () from /lib/tls/i686/cmov/libc.so.6
#5 0xb796a2a8 in QEventLoop::processEvents (this=0x8090ce0, flags=4) at kernel/qeventloop_x11.cpp:291
#6 0xb79dd179 in QEventLoop::enterLoop (this=0x8090ce0) at kernel/qeventloop.cpp:198
#7 0xb79dcf9a in QEventLoop::exec (this=0x8090ce0) at kernel/qeventloop.cpp:145
#8 0xb79c47bf in QApplication::exec (this=0xbfb930f4) at kernel/qapplication.cpp:2758
#9 0x080796da in main (argc=134753264, argv=0xb6e3d760) at /home/ronny/tmp/kpilot/kpilot/pilotDaemon.cc:1400
(gdb)