GNU gdb 6.4.90-debian
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i486-linux-gnu"...Using host libthread_db library "/lib/tls/i686/cmov/libthread_db.so.1".
(gdb) run
Starting program: /home/ronny/local/kpilot-491/bin/kpilotDaemon --debug 99 --nofork
Failed to read a valid object file image from memory.
[Thread debugging using libthread_db enabled]
[New Thread -1232984384 (LWP 24898)]
>main
>getDebugLevel
Qt: gdb: -nograb added to command-line options.
Use the -dograb option to enforce grabbing.
main: Configuration version 443
>PilotDaemon
>setupPilotLink
>KPilotLink
>KPilotDeviceLink
KPilotDeviceLink: Pilot-link version: [1202]
>reloadSettings
>getPilotSpeed
getPilotSpeed: Speed set to PILOTRATE=9600 (0)
>setupPilotCodec
setupPilotCodec: Using codec name ISO8859-15
setupPilotCodec: Creating codec ISO8859-15
setupPilotCodec: Got codec ISO 8859-15
reloadSettings: Got configuration /dev/ttyUSB1
reloadSettings: Got conduit list vcal-conduit,sysinfo_conduit,abbrowser_conduit,todo-conduit,internal_fileinstall
>requestSync
! [bool SyncAction::SyncMode::setMode(int)]
! Bad sync mode 0 requested.
! [virtual void PilotDaemon::requestSync(int)]
! Ignored fake sync type 0
reloadSettings: Resetting with device /dev/ttyUSB1
>reset
>close
>stopCommThread
>reset
>close
>stopCommThread
>logError
>startCommThread
>stopCommThread
reloadSettings: Using workarounds 0
[New Thread -1236399184 (LWP 24901)]
>PilotDaemonTray
>setupWidget
>slotShowNotListening
>changeIcon
setupWidget: Finished getting icons
! [void fillConduitNameMap()]
! No service for vcal-conduit
! [void fillConduitNameMap()]
! No service for sysinfo_conduit
! [void fillConduitNameMap()]
! No service for abbrowser_conduit
! [void fillConduitNameMap()]
! No service for todo-conduit
>logProgress
>FileInstaller
>LogFile
! [bool SyncAction::SyncMode::setMode(int)]
! Bad sync mode 0 requested.
>statusString
PilotDaemon: The daemon is ready with status PilotDaemon=Waiting for sync; NextSync=HotSync (KPilotDeviceLink=WaitingForDevice); (5)
>showTray
showTray: Tray icon displayed.
! [void fillConduitNameMap()]
! No service for vcal-conduit
! [void fillConduitNameMap()]
! No service for sysinfo_conduit
! [void fillConduitNameMap()]
! No service for abbrowser_conduit
! [void fillConduitNameMap()]
! No service for todo-conduit
>run
run: Polling every: [1] seconds.
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>slotShowNormal
>changeIcon
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
open: pi_bind error: [Datei oder Verzeichnis nicht gefunden]
! [bool DeviceCommThread::open(const QString&)]
! Der Pilot-Port "/dev/ttyUSB1" kann nicht ge�ffnet werden.
! [bool DeviceCommThread::open(const QString&)]
! (Datei oder Verzeichnis nicht gefunden)
>close
>openDevice
openDevice: Opening main pilot path: [/dev/ttyUSB1].
>open
open: Trying to create socket.
open: Got socket: [14]
open: Binding to path: [/dev/ttyUSB1]
>showList
showList: Bound devices: [/dev/ttyUSB1]
open: Current status: [KPilotDeviceLink=DeviceOpen] and socket: [14]
open: Listening to pilot. Now trying accept...
>customEvent
>logProgress
open: Link accept done.
>customEvent
>logProgress
Program received signal SIGINT, Interrupt.
[Switching to Thread -1232984384 (LWP 24898)]
0xb7f11410 in ?? ()
(gdb) thread apply all bt
Thread 2 (Thread -1236399184 (LWP 24901)):
#0 0xb7f11410 in ?? ()
Thread 1 (Thread -1232984384 (LWP 24898)):
#0 0xb7f11410 in ?? ()
#1 0xbfb62038 in ?? ()
#2 0x080be2bc in ?? ()
#3 0x080be138 in ?? ()
#4 0xb6dca071 in select () from /lib/tls/i686/cmov/libc.so.6
#5 0xb79612a8 in QEventLoop::processEvents () from /usr/lib/libqt-mt.so.3
#6 0xb79d4179 in QEventLoop::enterLoop () from /usr/lib/libqt-mt.so.3
#7 0xb79d3f9a in QEventLoop::exec () from /usr/lib/libqt-mt.so.3
#8 0xb79bb7bf in QApplication::exec () from /usr/lib/libqt-mt.so.3
#9 0x080796da in main (argc=134753264, argv=0xb6e34760) at /home/ronny/tmp/kpilot/kpilot/pilotDaemon.cc:1400
(gdb)