rendered paste bodyLevel: 16# dateFri Apr 20 20:19:18 EEST 2007# test -f $(which lsb_release) && lsb_release -a || cat /etc/*release*LSB Version: core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64:desktop-3.1-amd64:desktop-3.1-noarch:graphics-2.0-amd64:graphics-2.0-noarch:graphics-3.1-amd64:graphics-3.1-noarchDistributor ID: SUSE LINUXDescription: openSUSE 10.2 (X86-64)Release: 10.2Codename: n/a# who -r run-level 5 Apr 20 20:12 last=S# uname -aLinux hoasb-ff0cdd00-82 2.6.18.8-0.1-default #1 SMP Fri Mar 2 13:51:59 UTC 2007 x86_64 x86_64 x86_64 GNU/Linux# cat /proc/cpuinfoprocessor : 0vendor_id : AuthenticAMDcpu family : 15model : 95model name : AMD Athlon(tm) 64 Processor 3000+stepping : 2cpu MHz : 1000.000cache size : 512 KBfpu : yesfpu_exception : yescpuid level : 1wp : yesflags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow up pni cx16 lahf_lm svm cr8_legacybogomips : 2001.29TLB size : 1024 4K pagesclflush size : 64cache_alignment : 64address sizes : 40 bits physical, 48 bits virtualpower management: ts fid vid ttp tm stc# free -m total used free shared buffers cachedMem: 499 141 358 0 6 93-/+ buffers/cache: 41 458Swap: 2055 0 2055# zypper sl || rug sl# | Enabled | Refresh | Type | Name | URI --+---------+---------+------+-----------------+------------------------------------------------------------------------------1 | Yes | Yes | YUM | 20070420-200110 | http://www2.ati.com/suse/10.2/ 2 | Yes | Yes | YUM | voikko | http://opensuse.fi/voikko/10.2 3 | Yes | Yes | YUM | 20070420-190247 | http://ftp.skynet.be/pub/software.opensuse.org/xorg72/openSUSE_10.2/ 4 | Yes | Yes | YUM | update | http://ftp.gwdg.de/pub/suse/update/10.2/ 5 | Yes | Yes | YUM | packman | http://ftp.skynet.be/pub/packman/suse/10.2/ 6 | Yes | Yes | YUM | 20070420-190823 | http://software.opensuse.org/download/xorg72/openSUSE_10.2/ 7 | Yes | Yes | YaST | guru | http://ftp.skynet.be/pub/suser-guru/rpm/10.2/ 8 | Yes | No | YaST | main-non-oss | ftp://ftp.funet.fi/pub/linux/mirrors/opensuse/distribution/10.2/repo/non-oss/9 | Yes | No | YaST | main-oss | ftp://ftp.funet.fi/pub/linux/mirrors/opensuse/distribution/10.2/repo/oss/ # rpm -q zmd; pgrep zmd.exe && echo zmd is running || echo zmd is not runningzmd-7.1.100.0-46zmd is not running# mount/dev/sda2 on / type ext3 (rw,acl,user_xattr)proc on /proc type proc (rw)sysfs on /sys type sysfs (rw)debugfs on /sys/kernel/debug type debugfs (rw)udev on /dev type tmpfs (rw)devpts on /dev/pts type devpts (rw,mode=0620,gid=5)/dev/sda3 on /home type ext3 (rw,acl,user_xattr)securityfs on /sys/kernel/security type securityfs (rw)# cat /etc/fstab/dev/sda2 / ext3 acl,user_xattr 1 1/dev/sda3 /home ext3 acl,user_xattr 1 2/dev/sda1 swap swap defaults 0 0proc /proc proc defaults 0 0sysfs /sys sysfs noauto 0 0debugfs /sys/kernel/debug debugfs noauto 0 0usbfs /proc/bus/usb usbfs noauto 0 0devpts /dev/pts devpts mode=0620,gid=5 0 0# cat /etc/X11/xorg.conf|sed 's/.*/L&/;/section "device"/,/endsection/ bend;d;:end;s/^[t ]+//'|grep driverdriver "vesa"# lsusbBus 004 Device 003: ID 099a:610c Zippy Technology Corp. EL-610 Super Mini Electron luminescent KeyboardBus 004 Device 002: ID 1267:0201 Logic3 / SpectraVideo plc A4Tech SWOP-3 MouseBus 004 Device 001: ID 0000:0000 Bus 005 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. Bus 005 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 # lspci00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller00:00.6 Host bridge: VIA Technologies, Inc. Unknown device 629000:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80)00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller00:13.0 PCI bridge: VIA Technologies, Inc. VT8237A Host Bridge00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control02:00.0 VGA compatible controller: ATI Technologies Inc RV370 [Sapphire X550 Silent]02:00.1 Display controller: ATI Technologies Inc RV370 secondary [Sapphire X550 Silent]04:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10)05:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)# hwinfo --shortcpu: AMD Athlon(tm) 64 Processor 3000+, 1000 MHzkeyboard: /dev/input/event2 USB Multimedia Keyboardmouse: /dev/input/mice USB Mousegraphics card: ATI RADEON X550 (RV370 XT 5B63) RV370 secondary [ATI Sapphire X550 Silent]sound: ASUSTeK VIA High Definition Audio Controllerstorage: ASUSTeK VT8237A SATA 2-Port Controller ASUSTeK A7V600/K8V-X/A8V Deluxe motherboardnetwork: eth0 ASUSTeK RTL-8169 Gigabit Ethernetnetwork interface: lo Loopback network interface eth0 Ethernet network interface sit0 Network Interfacedisk: /dev/sda WDC WD1600AAJS-0 /dev/sdb Generic Compact Flash /dev/sdc Generic SM/xD-Picture /dev/sdd Generic SD/MMC /dev/sde Generic MS/MS-Propartition: /dev/sda1 Partition /dev/sda2 Partition /dev/sda3 Partitioncdrom: /dev/hda TSSTcorpCD/DVDW SH-S182Dusb controller: ASUSTeK A7V600/K8V-X/A8V Deluxe motherboard ASUSTeK A7V600/K8V-X/A8V Deluxe motherboard ASUSTeK A7V600/K8V-X/A8V Deluxe motherboard ASUSTeK A7V600/K8V-X/A8V Deluxe motherboard ASUSTeK A7V600/K8V-X/A8V Deluxe motherboardbios: BIOSbridge: VIA Host bridge ASUSTeK Host bridge ASUSTeK Host bridge ASUSTeK Host bridge ASUSTeK Host bridge VIA Host bridge VIA Host bridge VIA VT8237 PCI bridge [K8T800/K8T890 South] VIA K8T890 PCI to PCI Bridge Controller VIA K8T890 PCI to PCI Bridge Controller ASUSTeK VT8237A PCI to ISA Bridge VIA VT8251 Ultra VLINK Controller VIA VT8237A PCI to PCIE Bridge VIA VT8237A PCI to PCI Bridge AMD K8 [Athlon64/Opteron] HyperTransport Technology Configuration AMD K8 [Athlon64/Opteron] Address Map AMD K8 [Athlon64/Opteron] DRAM Controller AMD K8 [Athlon64/Opteron] Miscellaneous Controlhub: Linux 2.6.18.8-0.1-default uhci_hcd UHCI Host Controller Linux 2.6.18.8-0.1-default uhci_hcd UHCI Host Controller Linux 2.6.18.8-0.1-default uhci_hcd UHCI Host Controller Linux 2.6.18.8-0.1-default uhci_hcd UHCI Host Controller Linux 2.6.18.8-0.1-default ehci_hcd EHCI Host Controllermemory: Main Memoryunknown: FPU DMA controller PIC Timer RTC Keyboard controller /dev/lp0 Parallel controller PS/2 Controller ASUSTeK PIC /dev/ttyS0 16550A /dev/ttyS1 16550A /dev/input/event3 USB Multimedia Keyboard# dmesg | grep -v '^martian source |^ll header:|^SFW2-'Bootdata ok (command line is root=/dev/sda2 resume=/dev/sda1 splash=silent)Linux version 2.6.18.8-0.1-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Fri Mar 2 13:51:59 UTC 2007BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b000 (usable) BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e9c30 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable) BIOS-e820: 000000001ffb0000 - 000000001ffbe000 (ACPI data) BIOS-e820: 000000001ffbe000 - 000000001ffe0000 (ACPI NVS) BIOS-e820: 000000001ffe0000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)DMI 2.3 present.ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa7c0ACPI: RSDT (v001 A M I OEMRSDT 0x07000627 MSFT 0x00000097) @ 0x000000001ffb0000ACPI: FADT (v002 A M I OEMFACP 0x07000627 MSFT 0x00000097) @ 0x000000001ffb0200ACPI: MADT (v001 A M I OEMAPIC 0x07000627 MSFT 0x00000097) @ 0x000000001ffb0390ACPI: MCFG (v001 A M I OEMMCFG 0x07000627 MSFT 0x00000097) @ 0x000000001ffb0400ACPI: OEMB (v001 A M I AMI_OEM 0x07000627 MSFT 0x00000097) @ 0x000000001ffbe040ACPI: DSDT (v001 A0593 A0593000 0x00000000 INTL 0x02002026) @ 0x0000000000000000Scanning NUMA topology in Northbridge 24Number of nodes 1Node 0 MemBase 0000000000000000 Limit 000000001ffb0000NUMA: Using 63 for the hash shift.Using node hash shift of 63Bootmem setup node 0 0000000000000000-000000001ffb0000On node 0 totalpages: 128051 DMA zone: 2889 pages, LIFO batch:0 DMA32 zone: 125162 pages, LIFO batch:31ACPI: PM-Timer IO Port: 0x808ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)Processor #0 15:15 APIC version 16ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Setting APIC routing to physical flatUsing ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at 30000000 (gap: 20000000:dec00000)SMP: Allowing 2 CPUs, 1 hotplug CPUsBuilt 1 zonelists. Total pages: 128051Kernel command line: root=/dev/sda2 resume=/dev/sda1 splash=silentbootsplash: silent mode.Initializing CPU#0PID hash table entries: 2048 (order: 11, 16384 bytes)time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.time.c: Detected 1800.072 MHz processor.Console: colour VGA+ 80x25Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)Checking aperture...CPU 0: aperture @ d0000000 size 128 MBMemory: 507840k/523968k available (1915k kernel code, 15724k reserved, 1282k data, 188k init)Calibrating delay using timer specific routine.. 3602.33 BogoMIPS (lpj=7204665)Security Framework v1.0.0 initializedMount-cache hash table entries: 256CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)CPU: L2 Cache: 512K (64 bytes/line)CPU 0/0 -> Node 0SMP alternatives: switching to UP codechecking if image is initramfs... it isFreeing initrd memory: 3391k freedACPI: Core revision 20060707Using local APIC timer interrupts.result 12500506Detected 12.500 MHz APIC timer.Brought up 1 CPUstesting NMI watchdog ... OK.migration_cost=0NET: Registered protocol family 16ACPI: bus type pci registeredPCI: BIOS Bug: MCFG area at e0000000 is not E820-reservedPCI: Not using MMCONFIG.PCI: Using configuration type 1ACPI: Interpreter enabledACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (0000:00)PCI: Probing PCI hardware (bus 00)Boot video device is 0000:02:00.0PCI: Transparent bridge - 0000:00:13.1ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]ACPI: PCI Interrupt Routing Table [_SB_.PCI0.NBPG._PRT]ACPI: PCI Interrupt Routing Table [_SB_.PCI0.NBP0._PRT]ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P7._PRT]ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0PA._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)PCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportPCI-DMA: Disabling IOMMU.PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled.PCI: Bridge: 0000:00:02.0 IO window: d000-dfff MEM window: fbd00000-fbdfffff PREFETCH window: d0000000-d7ffffffPCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled.PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: fbe00000-fbefffff PREFETCH window: disabled.PCI: Bridge: 0000:00:13.1 IO window: e000-efff MEM window: fbf00000-fbffffff PREFETCH window: 30000000-300fffffPCI: Setting latency timer of device 0000:00:01.0 to 64GSI 16 sharing vector 0xA9 and IRQ 16ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169PCI: Setting latency timer of device 0000:00:02.0 to 64GSI 17 sharing vector 0xB1 and IRQ 17ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177PCI: Setting latency timer of device 0000:00:03.0 to 64PCI: Setting latency timer of device 0000:00:13.0 to 64PCI: Setting latency timer of device 0000:00:13.1 to 64NET: Registered protocol family 2IP route cache hash table entries: 4096 (order: 3, 32768 bytes)TCP established hash table entries: 16384 (order: 6, 262144 bytes)TCP bind hash table entries: 8192 (order: 5, 131072 bytes)TCP: Hash tables configured (established 16384 bind 8192)TCP reno registeredaudit: initializing netlink socket (disabled)audit(1177099946.568:1): initializedTotal HugeTLB memory allocated, 0VFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 512 (order 0, 4096 bytes)Initializing Cryptographic APIio scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)PCI: Setting latency timer of device 0000:00:02.0 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:02.0:pcie00]Allocate Port Service[0000:00:02.0:pcie02]PCI: Setting latency timer of device 0000:00:03.0 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:03.0:pcie00]Allocate Port Service[0000:00:03.0:pcie02]Real Time Clock Driver v1.12acNon-volatile memory driver v1.2Linux agpgart interface v0.101 (c) Dave JonesSerial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabledserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550Aserial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550ARAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksizeserio: i8042 AUX port at 0x60,0x64 irq 12serio: i8042 KBD port at 0x60,0x64 irq 1mice: PS/2 mouse device common for all miceinput: PC Speaker as /class/input/input0md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27md: bitmap version 4.39NET: Registered protocol family 1ACPI: (supports S0 S1 S3 S4 S5)Freeing unused kernel memory: 188k freedUniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxSCSI subsystem initializedACPI: Processor [CPU1] (supports 16 throttling states)ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]ACPI: Getting cpuindex for acpiid 0x2libata version 2.00 loaded.sata_via 0000:00:0f.0: version 2.0GSI 18 sharing vector 0xD1 and IRQ 18ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 209sata_via 0000:00:0f.0: routed to hard irq line 10ata1: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC400 irq 209ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xC482 bmdma 0xC408 irq 209scsi0 : sata_viaata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 0/32)ata1.00: ata1: dev 0 multi count 16ata1.00: configured for UDMA/133scsi1 : sata_viaata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)ATA: abnormal status 0x7F on port 0xC807 Vendor: ATA Model: WDC WD1600AAJS-0 Rev: 05.0 Type: Direct-Access ANSI SCSI revision: 05SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)sda: Write Protect is offsda: Mode Sense: 00 3a 00 00SCSI device sda: drive cache: write backSCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)sda: Write Protect is offsda: Mode Sense: 00 3a 00 00SCSI device sda: drive cache: write back sda: sda1 sda2 sda3sd 0:0:0:0: Attached scsi disk sdaVP_IDE: IDE controller at PCI slot 0000:00:0f.1PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0VP_IDE: chipset revision 7VP_IDE: not 100% native mode: will probe irqs laterVP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pioProbing IDE interface ide0...sd 0:0:0:0: Attached scsi generic sg0 type 0hda: TSSTcorpCD/DVDW SH-S182D, ATAPI CD/DVD-ROM driveide0 at 0x1f0-0x1f7,0x3f6 on irq 14Probing IDE interface ide1...BIOS EDD facility v0.16 2004-Jun-25, 1 devices foundAttempting manual resumekjournald starting. Commit interval 5 secondsEXT3 FS on sda2, internal journalEXT3-fs: mounted filesystem with ordered data mode.parport0: PC-style at 0x378 [PCSPP,TRISTATE]lp0: using parport0 (polling).pci_hotplug: PCI Hot Plug PCI Core version: 0.5shpchp: Standard Hot Plug PCI Controller Driver version: 0.4usbcore: registered new driver usbfsusbcore: registered new driver hubUSB Universal Host Controller Interface driver v3.0GSI 19 sharing vector 0xD9 and IRQ 19ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 217PCI: VIA IRQ fixup for 0000:00:10.0, from 5 to 9uhci_hcd 0000:00:10.0: UHCI Host Controlleruhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1uhci_hcd 0000:00:10.0: irq 217, io base 0x0000bc00usb usb1: new device found, idVendor=0000, idProduct=0000usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: UHCI Host Controllerusb usb1: Manufacturer: Linux 2.6.18.8-0.1-default uhci_hcdusb usb1: SerialNumber: 0000:00:10.0usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedGSI 20 sharing vector 0xE1 and IRQ 20ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 225PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 1uhci_hcd 0000:00:10.1: UHCI Host Controlleruhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2uhci_hcd 0000:00:10.1: irq 225, io base 0x0000b880usb usb2: new device found, idVendor=0000, idProduct=0000usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1usb usb2: Product: UHCI Host Controllerusb usb2: Manufacturer: Linux 2.6.18.8-0.1-default uhci_hcdusb usb2: SerialNumber: 0000:00:10.1usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 209PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1uhci_hcd 0000:00:10.2: UHCI Host Controlleruhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:10.2: irq 209, io base 0x0000b800usb usb3: new device found, idVendor=0000, idProduct=0000usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1usb usb3: Product: UHCI Host Controllerusb usb3: Manufacturer: Linux 2.6.18.8-0.1-default uhci_hcdusb usb3: SerialNumber: 0000:00:10.2usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detectedGSI 21 sharing vector 0xE9 and IRQ 21ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 233PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 9uhci_hcd 0000:00:10.3: UHCI Host Controlleruhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:10.3: irq 233, io base 0x0000b480usb usb4: new device found, idVendor=0000, idProduct=0000usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1usb usb4: Product: UHCI Host Controllerusb usb4: Manufacturer: Linux 2.6.18.8-0.1-default uhci_hcdusb usb4: SerialNumber: 0000:00:10.3usb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 209PCI: VIA IRQ fixup for 0000:00:10.4, from 11 to 1ehci_hcd 0000:00:10.4: EHCI Host Controllerehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5ehci_hcd 0000:00:10.4: irq 209, io mem 0xfbcffc00ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb5: new device found, idVendor=0000, idProduct=0000usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1usb usb5: Product: EHCI Host Controllerusb usb5: Manufacturer: Linux 2.6.18.8-0.1-default ehci_hcdusb usb5: SerialNumber: 0000:00:10.4usb usb5: configuration #1 chosen from 1 choicehub 5-0:1.0: USB hub foundhub 5-0:1.0: 8 ports detectedGSI 22 sharing vector 0x32 and IRQ 22ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 50PCI: Setting latency timer of device 0000:04:01.0 to 64hda: ATAPI 94X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)Uniform CD-ROM driver Revision: 3.20hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)ALSA sound/pci/hda/hda_codec.c:2121: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)ALSA sound/pci/hda/hda_codec.c:2123: hp=0x1b, dig_out=0x1e, din_in=0x0ALSA sound/pci/hda/hda_codec.c:2131: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0r8169 Gigabit Ethernet driver 2.2LK loadedACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 20 (level, low) -> IRQ 217eth0: RTL8169s/8110s at 0xffffc2000001ec00, 00:17:31:69:c2:22, IRQ 217usb 5-6: new high speed USB device using ehci_hcd and address 2usb 5-6: new device found, idVendor=0bda, idProduct=0111usb 5-6: new device strings: Mfr=1, Product=2, SerialNumber=3usb 5-6: Product: USB2.0-CRWusb 5-6: Manufacturer: Genericusb 5-6: SerialNumber: 20021111153705700usb 5-6: configuration #1 chosen from 1 choiceInitializing USB Mass Storage driver...scsi2 : SCSI emulation for USB Mass Storage devicesusb-storage: device found at 2usb-storage: waiting for device to settle before scanningusbcore: registered new driver usb-storageUSB Mass Storage support registered.Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472kusb 4-1: new low speed USB device using uhci_hcd and address 2usb 4-1: new device found, idVendor=1267, idProduct=0201usb 4-1: new device strings: Mfr=0, Product=1, SerialNumber=0usb 4-1: Product: USB Mouseusb 4-1: configuration #1 chosen from 1 choiceusb 4-2: new low speed USB device using uhci_hcd and address 3device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.comusb 4-2: new device found, idVendor=099a, idProduct=610cusb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0usb 4-2: Product: USB Multimedia Keyboard usb 4-2: Manufacturer: usb 4-2: configuration #1 chosen from 1 choiceusbcore: registered new driver hiddevinput: USB Mouse as /class/input/input1input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:10.3-1input: USB Multimedia Keyboard as /class/input/input2input: USB HID v1.00 Keyboard [ USB Multimedia Keyboard ] on usb-0000:00:10.3-2input: USB Multimedia Keyboard as /class/input/input3input: USB HID v1.00 Device [ USB Multimedia Keyboard ] on usb-0000:00:10.3-2usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.6:USB HID core driver Vendor: Generic- Model: Compact Flash Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00sd 2:0:0:0: Attached scsi removable disk sdbsd 2:0:0:0: Attached scsi generic sg1 type 0 Vendor: Generic- Model: SM/xD-Picture Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00sd 2:0:0:1: Attached scsi removable disk sdcsd 2:0:0:1: Attached scsi generic sg2 type 0 Vendor: Generic- Model: SD/MMC Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00sd 2:0:0:2: Attached scsi removable disk sddsd 2:0:0:2: Attached scsi generic sg3 type 0 Vendor: Generic- Model: MS/MS-Pro Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00sd 2:0:0:3: Attached scsi removable disk sdesd 2:0:0:3: Attached scsi generic sg4 type 0usb-storage: device scan completeloop: loaded (max 8 devices)kjournald starting. Commit interval 5 secondsEXT3 FS on sda3, internal journalEXT3-fs: mounted filesystem with ordered data mode.AppArmor: AppArmor initializedaudit(1177099961.592:2): AppArmor initializedNET: Registered protocol family 10lo: Disabled Privacy ExtensionsIPv6 over IPv4 tunneling driverip6_tables: (C) 2000-2006 Netfilter Core Teamip_tables: (C) 2000-2006 Netfilter Core TeamNetfilter messages via NETLINK v0.30.ip_conntrack version 2.4 (2046 buckets, 16368 max) - 288 bytes per conntrackACPI: Power Button (FF) [PWRF]ACPI: Power Button (CM) [PWRB]powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x8powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12r8169: eth0: link upNET: Registered protocol family 17audit(1177089175.908:3): audit_pid=3387 old=0 by auid=4294967295eth0: no IPv6 routers presentparport0: PC-style at 0x378 [PCSPP,TRISTATE]parport0: PC-style at 0x378 [PCSPP,TRISTATE]lp0: using parport0 (polling).ppa: Version 2.07 (for Linux 2.4.x)st: Version 20050830, fixed bufsize 32768, s/g segs 256parport0: PC-style at 0x378 [PCSPP,TRISTATE]parport0: PC-style at 0x378 [PCSPP,TRISTATE]lp0: using parport0 (polling).ppa: Version 2.07 (for Linux 2.4.x)