rendered paste body # This file was generated by Xorgautoconfig v0.2.2.
Section "ServerLayout"
Identifier "X.Org Configured"
Screen 0 "Internal Screen" 0 0
Screen 1 "Screen1" Rightof "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# For X Font Server support, uncomment this and comment the other FontPaths
# Note that this is not required for most configurations
# FontPath "unix/:-1"
FontPath "/usr/share/fonts/ttf-bitstream-vera/"
FontPath "/usr/share/fonts/util/"
FontPath "/usr/share/fonts/encodings/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/cyrillic/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/Type1/"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "glx"
Load "type1"
Load "freetype"
EndSection
Section "Extensions"
Option "Composite" "Enable" # Experimental
EndSection
Section "ServerFlags"
Option "blank time" "10" # 10 minutes
Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"
### Uncomment this Server flag if X should not change resolutions.
### This is useful if mode changing crashes / corrupts the X server
# Option "DisableVidModeExtensions"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
# Change "XkbModel" to "macintosh_old" if you are using
# the deprecated adb keycodes.
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "compose:rwin"
### Uncomment this if your layout uses nodeadkeys
#Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "Monitor0"
UseModes "Modes0"
ModelName "Apple Powerbook Display"
Option "DPMS"
HorizSync 30-130
VertRefresh 50-160
EndSection
Section "Monitor"
Identifier "VX2025wm"
UseModes "VX2025wmModes"
ModelName "ViewSonic 20.1 inch widescreen"
Option "DPMS"
HorizSync 30-100
VertRefresh 50-75
EndSection
Section "Modes"
Identifier "Modes0"
# Generated
# D: 96.219 MHz, H: 54.670 kHz, V: 59.945 Hz
Modeline "1440x900" 96.219 1440 1504 1536 1760 900 903 906 912 -HSync -VSync
EndSection
Section "Modes"
Identifier "VX2025wmModes"
# V-freq: 60.00 Hz // H-freq: 65.35 KHz
Modeline "1680x1050" 149.00 1680 1760 1944 2280 1050 1050 1052 1089
EndSection
Section "Device"
Identifier "Card0"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
### Available Driver options:
Option "EnablePageFlip" "true" # Increases performance
#Option "SWcursor" "false" # Use Software Cursor
Option "HWCursor" "false"
#Option "NoAccel" "false" # Disable Hardware Acceleration
Option "AGPMode" "8" # Set AGP data transfer rate, DRI only
Option "AGPFastWrite" "false" # Use AGP Fast Write, DRI only
Option "RenderAccel" "true" # Hardware acceleration
#Option "DCCMode" "false" # Use querried modes from monitor
#Option "MonitorLayout" "TMDS" # Enable this for Apple DVI LCDs
#Option "CRT2Position" "Leftof"
### See "man radeon" for additional options
Driver "radeon"
BusID "PCI:0:16:0"
EndSection
Section "Device"
Identifier "Card1"
Screen 1
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
### Available Driver options:
Option "EnablePageFlip" "true" # Increases performance
#Option "SWcursor" "false" # Use Software Cursor
#Option "NoAccel" "false" # Disable Hardware Acceleration
Option "AGPMode" "8" # Set AGP data transfer rate, DRI only
Option "AGPFastWrite" "false" # Use AGP Fast Write, DRI only
Option "RenderAccel" "true" # Hardware acceleration
#Option "DCCMode" "false" # Use querried modes from monitor
#Option "MonitorLayout" "TMDS" # Enable this for Apple DVI LCDs
### See "man radeon" for additional options
Driver "radeon"
BusID "PCI:0:16:0"
EndSection
Section "Screen"
Identifier "Internal Screen"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "VX2025wm"
DefaultDepth 24
Subsection "Display"
Virtual 1680 1050
Depth 24
Modes "1680x1050@60"
EndSubsection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection