rendered paste body[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000007fdd3400 end: 000000007fed3400 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fed3400 size: 000000000012cc00 end: 0000000080000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010007000 end: 00000000f0007000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000080000 end: 00000000feda0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed3400 (usable)
[ 0.000000] BIOS-e820: 000000007fed3400 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 523987) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523987
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523987
[ 0.000000] On node 0 totalpages: 523987
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2301 pages used for memmap
[ 0.000000] HighMem zone: 292310 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000fc370
[ 0.000000] ACPI: RSDT (v001 DELL M07 0x27d60609 ASL 0x00000061) @ 0x7fed3a54
[ 0.000000] ACPI: FADT (v001 DELL M07 0x27d60609 ASL 0x00000061) @ 0x7fed4800
[ 0.000000] ACPI: MADT (v001 DELL M07 0x27d60609 ASL 0x00000047) @ 0x7fed5000
[ 0.000000] ACPI: MCFG (v016 DELL M07 0x27d60609 ASL 0x00000061) @ 0x7fed4fc0
[ 0.000000] ACPI: BOOT (v001 DELL M07 0x27d60609 ASL 0x00000061) @ 0x7fed4bc0
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7fed3a8c
[ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Detected 2163.809 MHz processor.
[ 31.910101] Built 1 zonelists. Total pages: 519894
[ 31.910104] Kernel command line: root=/dev/sda3 ro quiet splash noapic nolapic
[ 31.910243] mapped APIC to ffffd000 (02012000)
[ 31.910246] Enabling fast FPU save and restore... done.
[ 31.910248] Enabling unmasked SIMD FPU exception support... done.
[ 31.910254] Initializing CPU#0
[ 31.910318] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 31.912047] Console: colour VGA+ 80x25
[ 31.912296] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 31.912604] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 31.989715] Memory: 2067032k/2095948k available (1992k kernel code, 27652k reserved, 893k data, 328k init, 1178444k highmem)
[ 31.989723] virtual kernel memory layout:
[ 31.989724] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 31.989725] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 31.989726] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 31.989727] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 31.989728] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 31.989729] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 31.989730] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 31.989733] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 32.066252] Calibrating delay using timer specific routine.. 4332.04 BogoMIPS (lpj=8664082)
[ 32.066288] Security Framework v1.0.0 initialized
[ 32.066295] SELinux: Disabled at boot.
[ 32.066310] Mount-cache hash table entries: 512
[ 32.066429] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[ 32.066437] monitor/mwait feature present.
[ 32.066438] using mwait in idle threads.
[ 32.066442] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 32.066444] CPU: L2 cache: 2048K
[ 32.066447] CPU: Physical Processor ID: 0
[ 32.066448] CPU: Processor Core ID: 0
[ 32.066450] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
[ 32.066458] Compat vDSO mapped to ffffe000.
[ 32.066462] Remapping vsyscall page to ffffe000
[ 32.066473] Checking 'hlt' instruction... OK.
[ 32.082350] SMP alternatives: switching to UP code
[ 32.082536] Freeing SMP alternatives: 11k freed
[ 32.082690] Early unpacking initramfs... done
[ 32.338300] ACPI: Core revision 20060707
[ 32.354601] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 32.355992] ACPI: setting ELCR to 0200 (from 0eb8)
[ 32.356857] CPU0: Intel Genuine Intel(R) CPU T2600 @ 2.16GHz stepping 08
[ 32.356875] SMP motherboard not detected.
[ 32.356877] Local APIC not detected. Using dummy APIC emulation.
[ 32.356904] Brought up 1 CPUs
[ 32.357088] Booting paravirtualized kernel on bare hardware
[ 32.357161] Time: 19:45:52 Date: 03/17/107
[ 32.357182] NET: Registered protocol family 16
[ 32.357245] EISA bus registered
[ 32.357249] ACPI: bus type pci registered
[ 32.384575] PCI: PCI BIOS revision 2.10 entry at 0xfb4d6, last bus=14
[ 32.384577] PCI: Using configuration type 1
[ 32.384579] Setting up standard PCI resources
[ 32.408414] ACPI: Interpreter enabled
[ 32.408416] ACPI: Using PIC for interrupt routing
[ 32.409604] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.409611] PCI: Probing PCI hardware (bus 00)
[ 32.409684] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 32.421652] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 32.421656] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 32.421860] Boot video device is 0000:01:00.0
[ 32.422885] PCI: Transparent bridge - 0000:00:1e.0
[ 32.422965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.440410] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[ 32.440617] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[ 32.440822] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 32.441027] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[ 32.441235] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 32.441443] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 32.441650] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 32.441857] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 32.442191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 32.443103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 32.443350] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 32.443551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 32.443810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 32.444152] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.444158] pnp: PnP ACPI init
[ 32.471807] pnp: PnP ACPI: found 11 devices
[ 32.471810] PnPBIOS: Disabled by ACPI PNP
[ 32.471843] PCI: Using ACPI for IRQ routing
[ 32.471845] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 32.517065] NET: Registered protocol family 8
[ 32.517067] NET: Registered protocol family 20
[ 32.532647] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 32.532649] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
[ 32.532652] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
[ 32.532656] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 32.532658] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[ 32.532662] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 32.532664] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[ 32.532666] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[ 32.532669] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[ 32.532674] pnp: 00:08: ioport range 0xc80-0xcff could not be reserved
[ 32.532676] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[ 32.532678] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[ 32.532680] pnp: 00:08: ioport range 0x930-0x97f has been reserved
[ 32.532882] PCI: Bridge: 0000:00:01.0
[ 32.532884] IO window: e000-efff
[ 32.532888] MEM window: dfd00000-dfefffff
[ 32.532890] PREFETCH window: c0000000-cfffffff
[ 32.532893] PCI: Bridge: 0000:00:1c.0
[ 32.532894] IO window: disabled.
[ 32.532900] MEM window: disabled.
[ 32.532903] PREFETCH window: disabled.
[ 32.532909] PCI: Bridge: 0000:00:1c.1
[ 32.532910] IO window: disabled.
[ 32.532916] MEM window: dfc00000-dfcfffff
[ 32.532919] PREFETCH window: disabled.
[ 32.532924] PCI: Bridge: 0000:00:1c.3
[ 32.532927] IO window: d000-dfff
[ 32.532932] MEM window: dfa00000-dfbfffff
[ 32.532937] PREFETCH window: d0000000-d01fffff
[ 32.532943] PCI: Bridge: 0000:00:1e.0
[ 32.532944] IO window: disabled.
[ 32.532950] MEM window: df900000-df9fffff
[ 32.532954] PREFETCH window: disabled.
[ 32.533113] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 32.533115] PCI: setting IRQ 11 as level-triggered
[ 32.533119] ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 32.533124] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 32.533146] ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 32.533152] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 32.533312] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 32.533314] PCI: setting IRQ 5 as level-triggered
[ 32.533318] ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 32.533324] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 32.533483] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 32.533485] PCI: setting IRQ 10 as level-triggered
[ 32.533489] ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 32.533495] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 32.533509] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 32.533525] NET: Registered protocol family 2
[ 32.570055] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 32.570136] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 32.570726] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 32.571032] TCP: Hash tables configured (established 131072 bind 65536)
[ 32.571035] TCP reno registered
[ 32.582115] checking if image is initramfs... it is
[ 33.086948] Freeing initrd memory: 6749k freed
[ 33.087117] Simple Boot Flag at 0x79 set to 0x1
[ 33.087324] audit: initializing netlink socket (disabled)
[ 33.087335] audit(1176839153.360:1): initialized
[ 33.087389] highmem bounce pool size: 64 pages
[ 33.087432] VFS: Disk quotas dquot_6.5.1
[ 33.087448] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 33.087486] io scheduler noop registered
[ 33.087488] io scheduler anticipatory registered
[ 33.087490] io scheduler deadline registered
[ 33.087496] io scheduler cfq registered (default)
[ 33.087714] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 33.087743] assign_interrupt_mode Found MSI capability
[ 33.087746] Allocate Port Service[0000:00:01.0:pcie00]
[ 33.087816] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 33.087868] assign_interrupt_mode Found MSI capability
[ 33.087870] Allocate Port Service[0000:00:1c.0:pcie00]
[ 33.087893] Allocate Port Service[0000:00:1c.0:pcie02]
[ 33.088000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 33.088053] assign_interrupt_mode Found MSI capability
[ 33.088055] Allocate Port Service[0000:00:1c.1:pcie00]
[ 33.088078] Allocate Port Service[0000:00:1c.1:pcie02]
[ 33.088183] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 33.088236] assign_interrupt_mode Found MSI capability
[ 33.088238] Allocate Port Service[0000:00:1c.3:pcie00]
[ 33.088261] Allocate Port Service[0000:00:1c.3:pcie02]
[ 33.088406] isapnp: Scanning for PnP cards...
[ 33.443181] isapnp: No Plug & Play device found
[ 33.460141] Real Time Clock Driver v1.12ac
[ 33.460190] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 33.460664] mice: PS/2 mouse device common for all mice
[ 33.461071] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 33.461230] input: Macintosh mouse button emulation as /class/input/input0
[ 33.461256] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 33.461259] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 33.461470] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 33.464924] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 33.464928] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 33.465022] EISA: Probing bus 0 at eisa.0
[ 33.465084] EISA: Mainboard B__FFFF detected.
[ 33.465107] Cannot allocate resource for EISA slot 1
[ 33.465134] EISA: Detected 0 cards.
[ 33.495201] TCP cubic registered
[ 33.495207] NET: Registered protocol family 1
[ 33.495224] Using IPI No-Shortcut mode
[ 33.495278] ACPI: (supports S0 S3 S4 S5)
[ 33.495316] Magic number: 3:516:799
[ 33.495409] hash matches device ptyr7
[ 33.495553] Freeing unused kernel memory: 328k freed
[ 33.496396] input: AT Translated Set 2 keyboard as /class/input/input1
[ 33.497582] Time: tsc clocksource has been installed.
[ 34.670485] Capability LSM initialized
[ 34.699372] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 34.699500] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 34.699660] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 34.699663] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 34.699670] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 34.704114] ACPI: Thermal Zone [THM] (49 C)
[ 34.998304] usbcore: registered new interface driver usbfs
[ 34.998321] usbcore: registered new interface driver hub
[ 34.998336] usbcore: registered new device driver usb
[ 34.998961] USB Universal Host Controller Interface driver v3.0
[ 34.999194] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 34.999197] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 34.999208] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 34.999212] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 34.999330] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 34.999361] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000bf80
[ 34.999439] usb usb1: configuration #1 chosen from 1 choice
[ 34.999460] hub 1-0:1.0: USB hub found
[ 34.999464] hub 1-0:1.0: 2 ports detected
[ 35.090471] ieee1394: Initialized config rom entry `ip1394'
[ 35.101148] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 35.101152] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[ 35.101164] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 35.101167] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 35.101184] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 35.101216] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf60
[ 35.101287] usb usb2: configuration #1 chosen from 1 choice
[ 35.101306] hub 2-0:1.0: USB hub found
[ 35.101314] hub 2-0:1.0: 2 ports detected
[ 35.205079] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
[ 35.205083] PCI: setting IRQ 9 as level-triggered
[ 35.205086] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9
[ 35.205096] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 35.205100] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 35.205118] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 35.205147] uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000bf40
[ 35.205223] usb usb3: configuration #1 chosen from 1 choice
[ 35.205244] hub 3-0:1.0: USB hub found
[ 35.205249] hub 3-0:1.0: 2 ports detected
[ 3.344000] Time: acpi_pm clocksource has been installed.
[ 3.400000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
[ 3.400000] PCI: setting IRQ 7 as level-triggered
[ 3.400000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
[ 3.400000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.400000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.400000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.400000] uhci_hcd 0000:00:1d.3: irq 7, io base 0x0000bf20
[ 3.400000] usb usb4: configuration #1 chosen from 1 choice
[ 3.400000] hub 4-0:1.0: USB hub found
[ 3.400000] hub 4-0:1.0: 2 ports detected
[ 3.432000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 3.504000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
[ 3.504000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.504000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.504000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.504000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.504000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.504000] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffa80000
[ 3.508000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.508000] usb usb5: configuration #1 chosen from 1 choice
[ 3.508000] hub 5-0:1.0: USB hub found
[ 3.508000] hub 5-0:1.0: 8 ports detected
[ 3.616000] SCSI subsystem initialized
[ 3.620000] libata version 2.20 loaded.
[ 3.620000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 3.620000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.620000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 3.620000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.620000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[ 3.620000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[ 3.620000] scsi0 : ata_piix
[ 3.784000] ata1.00: ata_hpa_resize 1: sectors = 231496650, hpa_sectors = 234441648
[ 3.784000] ata1.00: Host Protected Area detected.
[ 3.784000] current size : 231496650 sectors (118526 MB)
[ 3.784000] native size : 234441648 sectors (120034 MB)
[ 3.784000] ata1.00: SET of native returned 0, expected 234441648
[ 3.784000] ata1.00: ATA-7: FUJITSU MHV2120BH, 0085002A, max UDMA/100
[ 3.784000] ata1.00: 231496650 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 3.792000] ata1.00: ata_hpa_resize 1: sectors = 231496650, hpa_sectors = 234441648
[ 3.792000] ata1.00: Host Protected Area detected.
[ 3.792000] current size : 231496650 sectors (118526 MB)
[ 3.792000] native size : 234441648 sectors (120034 MB)
[ 3.792000] ata1.00: SET of native returned 0, expected 234441648
[ 3.792000] ata1.00: configured for UDMA/100
[ 3.792000] scsi1 : ata_piix
[ 3.956000] usb 1-1: device not accepting address 2, error -71
[ 4.128000] ata2.00: ATAPI, max UDMA/33
[ 4.308000] ata2.00: configured for UDMA/33
[ 4.308000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0085 PQ: 0 ANSI: 5
[ 4.308000] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE03 PQ: 0 ANSI: 5
[ 4.308000] b44.c:v1.01 (Jun 16, 2006)
[ 4.308000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 4.312000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:45:07:ec
[ 4.312000] ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 4.364000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[df9fd800-df9fdfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.380000] SCSI device sda: 231496650 512-byte hdwr sectors (118526 MB)
[ 4.380000] sda: Write Protect is off
[ 4.380000] sda: Mode Sense: 00 3a 00 00
[ 4.380000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.380000] SCSI device sda: 231496650 512-byte hdwr sectors (118526 MB)
[ 4.380000] sda: Write Protect is off
[ 4.380000] sda: Mode Sense: 00 3a 00 00
[ 4.380000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.380000] sda: sda1 sda2 sda3 sda4
[ 4.420000] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 4.444000] sd 0:0:0:0: Attached scsi disk sda
[ 4.444000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.444000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.452000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.452000] Uniform CD-ROM driver Revision: 3.20
[ 4.452000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.552000] usb 5-1: configuration #1 chosen from 1 choice
[ 4.552000] hub 5-1:1.0: USB hub found
[ 4.552000] hub 5-1:1.0: 4 ports detected
[ 4.744000] kjournald starting. Commit interval 5 seconds
[ 4.744000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.040000] usb 5-1.4: new full speed USB device using ehci_hcd and address 4
[ 5.184000] usb 5-1.4: configuration #1 chosen from 1 choice
[ 5.424000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 5.604000] usb 3-1: configuration #1 chosen from 1 choice
[ 5.640000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[384fc00036f44541]
[ 22.540000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 22.572000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.784000] Linux agpgart interface v0.102 (c) Dave Jones
[ 22.824000] iTCO_vendor_support: vendor-support=0
[ 22.832000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 22.832000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 22.832000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.852000] agpgart: Detected an Intel 945GM Chipset.
[ 22.868000] agpgart: AGP aperture is 256M @ 0x0
[ 22.876000] intel_rng: FWH not detected
[ 23.380000] ieee80211_crypt: registered algorithm 'NULL'
[ 23.460000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 23.460000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 23.556000] input: PC Speaker as /class/input/input2
[ 23.740000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000
[ 23.760000] sdhci: Secure Digital Host Controller Interface driver
[ 23.760000] sdhci: Copyright(c) Pierre Ossman
[ 23.760000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
[ 23.760000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 23.760000] ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 23.760000] mmc0: SDHCI at 0xdf9fd400 irq 9 DMA
[ 23.784000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 23.808000] Bluetooth: Core ver 2.11
[ 23.808000] NET: Registered protocol family 31
[ 23.808000] Bluetooth: HCI device and connection manager initialized
[ 23.808000] Bluetooth: HCI socket layer initialized
[ 23.828000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[ 23.828000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 23.840000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 23.840000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 23.840000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 23.912000] Bluetooth: HCI USB driver ver 2.9
[ 24.032000] usbcore: registered new interface driver hci_usb
[ 24.040000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[ 24.040000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 24.092000] usbcore: registered new interface driver hiddev
[ 24.240000] input: Microsoft Microsoft Wireless Optical Mouse� 1.00 as /class/input/input4
[ 24.240000] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse� 1.00] on usb-0000:00:1d.2-1
[ 24.240000] usbcore: registered new interface driver usbhid
[ 24.240000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 24.756000] lp: driver loaded but no devices found
[ 24.852000] fuse init (API version 7.8)
[ 24.904000] Adding 2128604k swap on /dev/disk/by-uuid/72272584-765e-4899-91b2-2b8cd555447b. Priority:-1 extents:1 across:2128604k
[ 24.996000] EXT3 FS on sda3, internal journal
[ 25.872000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[ 25.900000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 25.960000] NTFS volume version 3.1.
[ 27.024000] ACPI: AC Adapter [AC] (on-line)
[ 27.072000] ACPI: Battery Slot [BAT0] (battery present)
[ 27.120000] input: Lid Switch as /class/input/input5
[ 27.124000] ACPI: Lid Switch [LID]
[ 27.156000] input: Power Button (CM) as /class/input/input6
[ 27.160000] ACPI: Power Button (CM) [PBTN]
[ 27.192000] input: Sleep Button (CM) as /class/input/input7
[ 27.196000] ACPI: Sleep Button (CM) [SBTN]
[ 27.208000] Using specific hotkey driver
[ 27.232000] No dock devices found.
[ 27.296000] ibm_acpi: ec object not found
[ 27.388000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 27.388000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 27.388000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 27.412000] pcc_acpi: loading...
[ 31.584000] ppdev: user-space parallel port driver
[ 33.672000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 33.676000] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[ 33.676000] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[ 33.716000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 34.772000] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 34.772000] b44: eth0: Flow control is off for TX and off for RX.
[ 36.328000] [fglrx] total GART = 130023424
[ 36.328000] [fglrx] free GART = 114032640
[ 36.328000] [fglrx] max single GART = 114032640
[ 36.328000] [fglrx] total LFB = 134086656
[ 36.328000] [fglrx] free LFB = 82833408
[ 36.328000] [fglrx] max single LFB = 82833408
[ 36.328000] [fglrx] total Inv = 0
[ 36.328000] [fglrx] free Inv = 0
[ 36.328000] [fglrx] max single Inv = 0
[ 36.328000] [fglrx] total TIM = 0
[ 37.340000] NET: Registered protocol family 17
[ 43.096000] NET: Registered protocol family 10
[ 43.096000] lo: Disabled Privacy Extensions
[ 43.100000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 53.512000] eth0: no IPv6 routers present
[ 54.588000] Bluetooth: L2CAP ver 2.8
[ 54.588000] Bluetooth: L2CAP socket layer initialized
[ 54.776000] Bluetooth: RFCOMM socket layer initialized
[ 54.776000] Bluetooth: RFCOMM TTY layer initialized
[ 54.776000] Bluetooth: RFCOMM ver 1.8
[ 57.924000] usb 5-1.4:1.2: resuming
[ 57.924000] usb 5-1.4:1.2: resuming
[ 57.924000] hub 4-0:1.0: resuming
[ 57.924000] hub 4-0:1.0: PM: resume from 2, parent usb4 still 2
[ 57.924000] hub 4-0:1.0: resuming
[ 57.924000] hub 2-0:1.0: resuming
[ 57.924000] hub 2-0:1.0: PM: resume from 2, parent usb2 still 2
[ 57.924000] hub 2-0:1.0: resuming
[ 57.924000] hub 1-0:1.0: resuming
[ 57.928000] hub 1-0:1.0: PM: resume from 2, parent usb1 still 2
[ 57.928000] hub 1-0:1.0: resuming
[ 94.764000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 94.780000] ISOFS: changing to secondary root