rendered paste bodyyury@stallion:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root@vernadsky) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sat Apr 14 00:54:01 UTC 2007 (Ubuntu 2.6.20-15.25-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f50c0
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x000f6a00
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3000
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3040
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff74c0
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 1664.134 MHz processor.
[ 13.105935] Built 1 zonelists. Total pages: 130033
[ 13.105939] Kernel command line: root=UUID=e195176e-8a1b-42a5-b0df-c296e97aeb84 ro quiet splash
[ 13.106133] mapped APIC to ffffd000 (fee00000)
[ 13.106136] mapped IOAPIC to ffffc000 (fec00000)
[ 13.106139] Enabling fast FPU save and restore... done.
[ 13.106142] Enabling unmasked SIMD FPU exception support... done.
[ 13.106154] Initializing CPU#0
[ 13.106218] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 13.107944] Console: colour VGA+ 80x25
[ 13.108306] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.108598] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.122941] Memory: 508736k/524224k available (1992k kernel code, 14932k reserved, 893k data, 328k init, 0k highmem)
[ 13.122953] virtual kernel memory layout:
[ 13.122954] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 13.122956] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 13.122957] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 13.122959] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 13.122960] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 13.122962] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 13.122963] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 13.122967] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 13.202177] Calibrating delay using timer specific routine.. 3331.04 BogoMIPS (lpj=6662099)
[ 13.202228] Security Framework v1.0.0 initialized
[ 13.202237] SELinux: Disabled at boot.
[ 13.202257] Mount-cache hash table entries: 512
[ 13.202434] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 13.202444] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 13.202447] CPU: L2 Cache: 256K (64 bytes/line)
[ 13.202451] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 13.202463] Compat vDSO mapped to ffffe000.
[ 13.202469] Remapping vsyscall page to ffffe000
[ 13.202481] Checking 'hlt' instruction... OK.
[ 13.218315] SMP alternatives: switching to UP code
[ 13.218617] Freeing SMP alternatives: 11k freed
[ 13.218916] Early unpacking initramfs... done
[ 13.571372] ACPI: Core revision 20060707
[ 13.578286] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 13.581576] CPU0: AMD Athlon(tm) XP 2000+ stepping 00
[ 13.581601] Total of 1 processors activated (3331.04 BogoMIPS).
[ 13.581804] ENABLING IO-APIC IRQs
[ 13.582006] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 13.725984] Brought up 1 CPUs
[ 13.726278] Booting paravirtualized kernel on bare hardware
[ 13.726370] Time: 23:36:06 Date: 03/14/107
[ 13.726413] NET: Registered protocol family 16
[ 13.726534] EISA bus registered
[ 13.726540] ACPI: bus type pci registered
[ 13.758724] PCI: PCI BIOS revision 2.10 entry at 0xfaad0, last bus=2
[ 13.758727] PCI: Using configuration type 1
[ 13.758729] Setting up standard PCI resources
[ 13.772490] ACPI: Interpreter enabled
[ 13.772495] ACPI: Using IOAPIC for interrupt routing
[ 13.773211] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.773217] PCI: Probing PCI hardware (bus 00)
[ 13.773506] PCI: nForce2 C1 Halt Disconnect fixup
[ 13.774224] Boot video device is 0000:02:00.0
[ 13.774334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.831914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 13.832515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 13.833680] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 13.834033] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 13.834367] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 13.834701] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 13.835040] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 13.835376] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 13.835711] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 13.836047] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 13.836381] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 13.836715] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 13.837046] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 13.837381] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 13.837717] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 13.838064] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 13.838396] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 13.838729] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 13.839049] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 13.839343] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 13.839636] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 13.839928] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 13.840219] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 13.840601] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[ 13.840980] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[ 13.841357] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 13.841738] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 13.842127] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[ 13.842505] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 13.842802] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 13.843185] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[ 13.843565] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 13.843942] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 13.844320] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 13.848460] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.848475] pnp: PnP ACPI init
[ 13.855579] pnp: PnP ACPI: found 17 devices
[ 13.855587] PnPBIOS: Disabled by ACPI PNP
[ 13.855663] PCI: Using ACPI for IRQ routing
[ 13.855672] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.897431] NET: Registered protocol family 8
[ 13.897434] NET: Registered protocol family 20
[ 13.898134] pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
[ 13.898138] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
[ 13.898141] pnp: 00:00: ioport range 0x1400-0x147f has been reserved
[ 13.898145] pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
[ 13.898148] pnp: 00:00: ioport range 0x1800-0x187f has been reserved
[ 13.898151] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
[ 13.898159] pnp: 00:01: ioport range 0x1c00-0x1c3f has been reserved
[ 13.898163] pnp: 00:01: ioport range 0x2000-0x203f has been reserved
[ 13.898525] PCI: Bridge: 0000:00:08.0
[ 13.898529] IO window: 9000-9fff
[ 13.898535] MEM window: e4000000-e4ffffff
[ 13.898539] PREFETCH window: disabled.
[ 13.898545] PCI: Bridge: 0000:00:1e.0
[ 13.898548] IO window: a000-afff
[ 13.898553] MEM window: c0000000-dfffffff
[ 13.898557] PREFETCH window: 30000000-300fffff
[ 13.898570] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 13.898609] NET: Registered protocol family 2
[ 13.937921] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 13.938030] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 13.938239] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 13.938343] TCP: Hash tables configured (established 16384 bind 8192)
[ 13.938346] TCP reno registered
[ 13.949969] checking if image is initramfs... it is
[ 14.620233] Freeing initrd memory: 6744k freed
[ 14.620816] audit: initializing netlink socket (disabled)
[ 14.620834] audit(1176593766.592:1): initialized
[ 14.620969] VFS: Disk quotas dquot_6.5.1
[ 14.620992] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 14.621054] io scheduler noop registered
[ 14.621057] io scheduler anticipatory registered
[ 14.621060] io scheduler deadline registered
[ 14.621070] io scheduler cfq registered (default)
[ 14.621380] isapnp: Scanning for PnP cards...
[ 14.975761] isapnp: No Plug & Play device found
[ 15.011371] Real Time Clock Driver v1.12ac
[ 15.011447] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 15.011592] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 15.011886] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 15.012734] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 15.013161] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 15.013631] mice: PS/2 mouse device common for all mice
[ 15.014327] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 15.014636] input: Macintosh mouse button emulation as /class/input/input0
[ 15.014676] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 15.014682] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 15.014942] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 15.018162] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 15.018170] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 15.018365] EISA: Probing bus 0 at eisa.0
[ 15.018377] Cannot allocate resource for EISA slot 1
[ 15.018380] Cannot allocate resource for EISA slot 2
[ 15.018411] EISA: Detected 0 cards.
[ 15.048511] TCP cubic registered
[ 15.048518] NET: Registered protocol family 1
[ 15.048547] Using IPI No-Shortcut mode
[ 15.048618] ACPI: (supports S0 S1 S4 S5)
[ 15.048675] Magic number: 3:62:656
[ 15.049295] Time: tsc clocksource has been installed.
[ 15.049357] Freeing unused kernel memory: 328k freed
[ 15.070464] input: AT Translated Set 2 keyboard as /class/input/input1
[ 16.313293] Capability LSM initialized
[ 17.003551] usbcore: registered new interface driver usbfs
[ 17.003583] usbcore: registered new interface driver hub
[ 17.003614] usbcore: registered new device driver usb
[ 17.020094] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 17.020658] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 17.020669] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[ 17.020686] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 17.020691] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 17.020901] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 17.020924] ohci_hcd 0000:00:02.0: irq 16, io mem 0xe5004000
[ 17.083677] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 17.118686] usb usb1: configuration #1 chosen from 1 choice
[ 17.118731] hub 1-0:1.0: USB hub found
[ 17.118745] hub 1-0:1.0: 3 ports detected
[ 17.218361] Floppy drive(s): fd0 is 1.44M
[ 17.224765] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 17.224778] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[ 17.224798] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 17.224802] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 17.224835] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 17.224860] ohci_hcd 0000:00:02.1: irq 17, io mem 0xe5005000
[ 17.286211] usb usb2: configuration #1 chosen from 1 choice
[ 17.286248] hub 2-0:1.0: USB hub found
[ 17.286264] hub 2-0:1.0: 3 ports detected
[ 17.289897] FDC 0 is a post-1991 82077
[ 17.392721] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 17.392735] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[ 17.392749] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 17.392754] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 17.392785] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 17.392829] ehci_hcd 0000:00:02.2: debug port 1
[ 17.392835] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 17.392849] ehci_hcd 0000:00:02.2: irq 18, io mem 0xe5000000
[ 17.392857] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 17.392960] usb usb3: configuration #1 chosen from 1 choice
[ 17.392993] hub 3-0:1.0: USB hub found
[ 17.393005] hub 3-0:1.0: 6 ports detected
[ 17.506917] SCSI subsystem initialized
[ 17.513002] libata version 2.20 loaded.
[ 17.517095] pata_amd 0000:00:09.0: version 0.2.8
[ 17.517142] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 17.517413] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 17.517456] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 17.517479] scsi0 : pata_amd
[ 17.872197] ata1.00: ata_hpa_resize 1: sectors = 156299375, hpa_sectors = 156301488
[ 17.872204] ata1.00: Host Protected Area detected.
[ 17.872206] current size : 156299375 sectors (80025 MB)
[ 17.872208] native size : 156301488 sectors (80026 MB)
[ 17.872485] ata1.00: native size increased to 150994954 sectors
[ 17.872489] ata1.00: ATA-6: ST380011A, 3.06, max UDMA/100
[ 17.872491] ata1.00: 150994954 sectors, multi 16: LBA48
[ 17.913886] ata1.01: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 486539294
[ 17.913890] ata1.01: ATA-7: ST3250824A, 3.AAH, max UDMA/100
[ 17.913893] ata1.01: 488397168 sectors, multi 16: LBA48
[ 17.923934] ata1.00: n_sectors mismatch 150994954 != 156301488
[ 17.923937] ata1.00: revalidation failed (errno=-19)
[ 17.923943] ata1.00: limiting speed to UDMA/100:PIO3
[ 17.923946] ata1: failed to recover some devices, retrying in 5 secs
[ 18.387447] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 19.095761] usb 1-1: configuration #1 chosen from 1 choice
[ 19.402911] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 19.610160] usb 2-3: configuration #1 chosen from 1 choice
[ 19.625527] usbcore: registered new interface driver libusual
[ 19.629839] Initializing USB Mass Storage driver...
[ 19.629948] scsi2 : SCSI emulation for USB Mass Storage devices
[ 19.630016] usbcore: registered new interface driver usb-storage
[ 19.630021] USB Mass Storage support registered.
[ 19.630155] usb-storage: device found at 2
[ 19.630158] usb-storage: waiting for device to settle before scanning
[ 23.293432] ata1.01: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 23.305057] ata1.00: n_sectors mismatch 150994954 != 156301488
[ 23.305060] ata1.00: revalidation failed (errno=-19)
[ 23.305065] ata1.00: disabled
[ 23.305068] ata1: failed to recover some devices, retrying in 5 secs
[ 24.680797] usb-storage: device scan complete
[ 24.824751] scsi 2:0:0:0: Direct-Access OEI-USB CF/SM/SD/MS 1.05 PQ: 0 ANSI: 0
[ 24.841968] sd 2:0:0:0: Attached scsi removable disk sda
[ 24.847353] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 28.348763] ata1.01: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 28.348771] ata1.01: configured for UDMA/100
[ 28.348788] scsi1 : pata_amd
[ 28.670361] ata2.00: ATAPI, max UDMA/33
[ 28.834154] ata2.00: configured for UDMA/33
[ 28.834311] scsi 0:0:1:0: Direct-Access ATA ST3250824A 3.AA PQ: 0 ANSI: 5
[ 28.834755] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 28.834772] sdb: Write Protect is off
[ 28.834775] sdb: Mode Sense: 00 3a 00 00
[ 28.834794] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.834869] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 28.834881] sdb: Write Protect is off
[ 28.834883] sdb: Mode Sense: 00 3a 00 00
[ 28.834901] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.834905] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 28.884366] sd 0:0:1:0: Attached scsi disk sdb
[ 28.884638] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 28.891131] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-109 1.58 PQ: 0 ANSI: 5
[ 28.891565] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[ 28.897821] 8139cp 0000:01:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 28.897839] 8139cp 0000:01:0b.0: Try the "8139too" driver instead.
[ 28.900612] 8139too Fast Ethernet driver 0.9.28
[ 28.901291] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 28.901305] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
[ 28.902079] eth0: RealTek RTL8139 at 0xe0848000, 00:0d:61:90:30:26, IRQ 19
[ 28.902082] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 28.969587] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 28.969595] Uniform CD-ROM driver Revision: 3.20
[ 28.969902] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 29.123884] Attempting manual resume
[ 29.123890] swsusp: Resume From Partition 8:22
[ 29.123892] PM: Checking swsusp image.
[ 29.125573] PM: Resume from disk failed.
[ 29.145962] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 29.145968] EXT3-fs: write access will be enabled during recovery.
[ 31.346360] kjournald starting. Commit interval 5 seconds
[ 31.346387] EXT3-fs: sdb1: orphan cleanup on readonly fs
[ 31.346397] ext3_orphan_cleanup: deleting unreferenced inode 731
[ 31.365913] ext3_orphan_cleanup: deleting unreferenced inode 3473409
[ 31.371511] EXT3-fs: sdb1: 2 orphan inodes deleted
[ 31.371514] EXT3-fs: recovery complete.
[ 31.425659] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.806765] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 40.997738] NET: Registered protocol family 17
[ 42.005007] Linux agpgart interface v0.102 (c) Dave Jones
[ 42.136378] agpgart: Detected NVIDIA nForce2 chipset
[ 42.142101] agpgart: AGP aperture is 64M @ 0xe0000000
[ 42.479587] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.481782] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.504474] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 42.504519] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000
[ 43.201307] input: PC Speaker as /class/input/input2
[ 43.206168] Bluetooth: Core ver 2.11
[ 43.206281] NET: Registered protocol family 31
[ 43.206284] Bluetooth: HCI device and connection manager initialized
[ 43.206289] Bluetooth: HCI socket layer initialized
[ 43.214975] Bluetooth: HCI USB driver ver 2.9
[ 43.347486] usbcore: registered new interface driver hci_usb
[ 43.491511] parport: PnPBIOS parport detected.
[ 43.491602] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 43.941641] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input3
[ 43.944809] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 43.944818] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 16
[ 43.944852] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 44.265629] intel8x0_measure_ac97_clock: measured 54691 usecs
[ 44.265635] intel8x0: clocking to 47443
[ 44.453792] lp0: using parport0 (interrupt-driven).
[ 44.495310] Adding 1510068k swap on /dev/disk/by-uuid/44f4d07a-97b4-4702-ace9-a68ddccb1259. Priority:-1 extents:1 across:1510068k
[ 44.575275] EXT3 FS on sdb1, internal journal
[ 44.702627] NET: Registered protocol family 10
[ 44.702750] lo: Disabled Privacy Extensions
[ 44.901043] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 50.182289] PPP generic driver version 2.4.2
[ 50.250117] NET: Registered protocol family 24
[ 50.839893] input: Power Button (FF) as /class/input/input4
[ 50.845844] ACPI: Power Button (FF) [PWRF]
[ 50.892968] input: Power Button (CM) as /class/input/input5
[ 50.898827] ACPI: Power Button (CM) [PWRB]
[ 50.922907] Using specific hotkey driver
[ 50.969689] No dock devices found.
[ 51.025567] ibm_acpi: ec object not found
[ 51.190063] pcc_acpi: loading...
[ 53.208640] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 54.987890] eth0: no IPv6 routers present
[ 56.288681] ppdev: user-space parallel port driver
[ 57.734985] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 57.744318] [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[ 57.744740] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
[ 57.763062] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 57.763081] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
[ 58.850764] [fglrx] Internal AGP support requested, but kernel AGP support active.
[ 58.850776] [fglrx] Have to use kernel AGP support to avoid conflicts.
[ 58.850781] [fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset)
[ 58.851859] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 58.852140] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 58.852451] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
[ 58.852723] [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[ 58.863201] [fglrx] total GART = 67108864
[ 58.863212] [fglrx] free GART = 51113984
[ 58.863215] [fglrx] max single GART = 51113984
[ 58.863218] [fglrx] total LFB = 268435456
[ 58.863220] [fglrx] free LFB = 250605568
[ 58.863222] [fglrx] max single LFB = 250605568
[ 58.863225] [fglrx] total Inv = 268435456
[ 58.863227] [fglrx] free Inv = 268435456
[ 58.863229] [fglrx] max single Inv = 268435456
[ 58.863231] [fglrx] total TIM = 0
[ 59.388651] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 59.388659] apm: overridden by ACPI.
[ 60.302902] Bluetooth: L2CAP ver 2.8
[ 60.302909] Bluetooth: L2CAP socket layer initialized
[ 60.440686] Bluetooth: RFCOMM socket layer initialized
[ 60.440708] Bluetooth: RFCOMM TTY layer initialized
[ 60.440711] Bluetooth: RFCOMM ver 1.8
yury@stallion:~$