All pastes #43940 Raw Edit

Stuff

public text v1 · immutable
#43940 ·published 2006-03-01 02:51 UTC
rendered paste body
abling (U)DMA for SAMSUNG CD-ROM SC-148C
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 19925880 sectors (10202 MB) w/1900KiB Cache, CHS=19767/16/63, UDMA(66)
hdb: attached ide-disk driver.
hdb: 39102336 sectors (20020 MB) w/1916KiB Cache, CHS=38792/16/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [1240/255/63] p1 p2 < p5 >
 /dev/ide/host0/bus0/target1/lun0: [PTBL] [2434/255/63] p1
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: ide0(3,1): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 572346
EXT3-fs: ide0(3,1): 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 441748k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 64M @ 0xf0000000
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
02:0c.0: 3Com PCI 3c905C Tornado at 0xdc80. Vers LK1.1.18-ac
 00:06:5b:61:51:47, IRQ 18
  product code 0000 rev 00.6 date 06-10-00
  Internal config register is 1840000, transceivers 0xa.
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 24, status 782d.
  Enabling bus-master transmits and whole-frame receives.
02:0c.0: scatter/gather enabled. h/w checksums enabled
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Intel 810 + AC97 Audio, version 1.01, 09:49:29 Aug 17 2005
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH2 found at IO 0xcc40 and 0xc800, MEM 0x0000 and 0x0000, IRQ 17
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ADS96 (Analog Devices AD1885)
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
i810_audio: setting clocking to 41319
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 09:50:48 Aug 17 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1f.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc016) is not claimed by any active driver.
uhci.c: USB Universal Host Controller Interface driver v1.1
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(1)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
Search for id:(ff ff) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(20 2c) interleave(1) type(1)
Search for id:(20 2c) interleave(1) type(1)
Search for id:(20 2c) interleave(1) type(1)
Search for id:(20 06) interleave(1) type(2)
Search for id:(20 06) interleave(1) type(2)
Search for id:(20 06) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
Search for id:(20 2c) interleave(1) type(1)
Search for id:(20 2c) interleave(1) type(1)
Search for id:(20 2c) interleave(1) type(1)
Search for id:(20 06) interleave(1) type(2)
Search for id:(20 06) interleave(1) type(2)
Search for id:(20 06) interleave(1) type(2)
JEDEC: Found no ICH2 rom device at location zero
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
i810_rng: RNG not detected
hw_random: RNG not detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb1:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
[drm] AGP 0.99 Aperture @ 0xf0000000 64MB
[drm] Initialized r128 2.2.0 20010917 on minor 0
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
NET4: AppleTalk 0.18a for Linux NET4.0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev 16:00 (hdc), sector 64
isofs_read_super: bread failed, dev=16:00, iso_blknum=16, block=32
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
wlan: 0.8.6.0 (EXPERIMENTAL)
ath_rate_sample: 1.2
ath_pci: 0.9.6.0 (EXPERIMENTAL)
Build date: Feb 28 2006
Debugging version (IEEE80211)
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: H/W encryption support: WEP AES AES_CCM TKIP
ath0: mac 5.9 phy 4.3 radio 4.6
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
Debugging version (ATH)
ath0: Atheros 5212: mem=0xfdef0000, irq=18
debian:~#