rendered paste bodyLinux version 2.6.18.8-0.1-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Fri Mar 2 13:51:59 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 130992
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 126896 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 ACPIAM ) @ 0x000fa290
ACPI: RSDT (v001 A M I OEMRSDT 0x12000415 MSFT 0x00000097) @ 0x1ffb0000
ACPI: FADT (v001 A M I OEMFACP 0x12000415 MSFT 0x00000097) @ 0x1ffb0200
ACPI: MADT (v001 A M I OEMAPIC 0x12000415 MSFT 0x00000097) @ 0x1ffb0390
ACPI: OEMB (v001 A M I AMI_OEM 0x12000415 MSFT 0x00000097) @ 0x1ffc0040
ACPI: DSDT (v001 K8CBZ K8CBZ150 0x00000150 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:df7c0000)
Detected 2400.065 MHz processor.
Built 1 zonelists. Total pages: 130992
Kernel command line: root=/dev/hda1 vga=0x31a resume=/dev/hda5 splash=silent elevator=
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512680k/523968k available (1697k kernel code, 10720k reserved, 972k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4802.27 BogoMIPS (lpj=9604540)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is
Freeing initrd memory: 2892k freed
ACPI: Core revision 20060707
CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 00
Total of 1 processors activated (4802.27 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-083f claimed by ali7101 ACPI
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:02.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0d: ioport range 0x680-0x6ff has been reserved
pnp: 00:0d: ioport range 0x295-0x296 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fc900000-fe9fffff
PREFETCH window: d4800000-f47fffff
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: fea00000-feafffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Machine check exception polling timer started.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1176475684.572:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 10240k, total 262144k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:e2e0
vesafb: pmi: set display start = c00ce316, set palette = c00ce380
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3).
Console: switching to colour frame buffer device 156x60
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
ALI15X3: IDE controller at PCI slot 0000:00:0e.0
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 169
ALI15X3: chipset revision 199
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD1600BB-00GUA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 > hda3
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
hdd: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
libata version 2.00 loaded.
sata_uli 0000:00:0e.1: version 1.0
ACPI: PCI Interrupt 0000:00:0e.1[A] -> GSI 19 (level, low) -> IRQ 169
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 169
ata2: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 169
scsi0 : sata_uli
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_uli
ata2: SATA link down (SStatus 0 SControl 300)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
parport0: Printer, Canon BJC-2100
lp0: using parport0 (interrupt-driven).
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 18 (level, low) -> IRQ 177
Linux agpgart interface v0.101 (c) Dave Jones
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
gameport: NS558 PnP Gameport is pnp00:07/gameport0, io 0x200, speed 890kHz
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
ALSA sound/pci/ac97/ac97_codec.c:1923: AC'97 1 does not respond - RESET
ALSA sound/pci/ac97/ac97_codec.c:1932: AC'97 1 access is not valid [0xffffffff], removing mixer.
ALSA sound/pci/intel8x0.c:2138: Unable to initialize codec #1
intel8x0_measure_ac97_clock: measured 55453 usecs
intel8x0: clocking to 48000
ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 185
eth0: ULi M5263 at pci0000:00:0d.0, 00:0b:6a:ad:96:2d, irq 185.
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 193
ohci_hcd 0000:00:0f.0: OHCI Host Controller
ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.0: irq 193, io mem 0xfebfd000
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
usb usb1: SerialNumber: 0000:00:0f.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:0f.1[B] -> GSI 21 (level, low) -> IRQ 201
ohci_hcd 0000:00:0f.1: OHCI Host Controller
ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.1: irq 201, io mem 0xfebfc000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
usb usb2: SerialNumber: 0000:00:0f.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:0f.2[C] -> GSI 22 (level, low) -> IRQ 209
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0f.2: irq 209, io mem 0xfebfb000
usb 1-2: new full speed USB device using ohci_hcd and address 2
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.18.8-0.1-default ohci_hcd
usb usb3: SerialNumber: 0000:00:0f.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:0f.3[D] -> GSI 23 (level, low) -> IRQ 217
ehci_hcd 0000:00:0f.3: EHCI Host Controller
ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:0f.3: debug port 1
usb 1-2: new device found, idVendor=0bda, idProduct=8187
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: RTL8187_Wireless_LAN_Adapter
usb 1-2: Manufacturer: Manufacturer_Realtek_RTL8187_
usb 1-2: SerialNumber: 0018E71BBB72
usb 1-2: configuration #1 chosen from 1 choice
ehci_hcd 0000:00:0f.3: irq 217, io mem 0xfebfe800
ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.18.8-0.1-default ehci_hcd
usb usb4: SerialNumber: 0000:00:0f.3
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
usb 1-2: USB disconnect, address 2
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Unsupported ALi chipset (device id: 1689)
ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
ali1563: SMBus control = 0403
ali1563_probe: Returning 0
agpgart: Detected AGP bridge 0
Setting up ULi AGP.
agpgart: AGP aperture is 64M @ 0xf8000000
usb 4-2: new high speed USB device using ehci_hcd and address 2
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 225
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
usb 4-2: new device found, idVendor=0bda, idProduct=8187
usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: RTL8187_Wireless_LAN_Adapter
usb 4-2: Manufacturer: Manufacturer_Realtek_RTL8187_
usb 4-2: SerialNumber: 0018E71BBB72
usb 4-2: configuration #1 chosen from 1 choice
Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 across:1510068k
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4093 buckets, 32744 max) - 228 bytes per conntrack
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (version 2.00.00)
ACPI: Invalid package argument
ACPI Exception (acpi_processor-0270): AE_BAD_PARAMETER, Invalid _PSS data [20060707]
powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0xa
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x6
powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0x2
audit(1176475716.459:2): audit_pid=2767 old=0 by auid=4294967295
ADDRCONF(NETDEV_UP): eth0: link is not ready
NET: Registered protocol family 17
uli526x: eth0 NIC Link is Down
Time: acpi_pm clocksource has been installed.
bootsplash: status on console 0 changed to on
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'TKIP'
ieee80211_crypt: registered algorithm 'CCMP'
r8187: no version for "ieee80211_reset_queue" found: kernel tainted.
Linux kernel driver for RTL8187 based WLAN cards
Copyright (c) 2004-2005, Andrea Merello
rtl8187: Initializing module
rtl8187: Wireless extensions version 20
rtl8187: Initializing proc filesystem
rtl8187: Reported EEPROM chip is a 93c46 (1Kbit)
rtl8187: Card MAC address is 00:18:e7:1b:bb:72
rtl8187: Card reports RF frontend Realtek 8225
rtl8187: WW:This driver has EXPERIMENTAL support for this chipset.
rtl8187: WW:use it with care and at your own risk and
rtl8187: WW:**PLEASE** REPORT SUCCESS/INSUCCESS TO andreamrl@tiscali.it
rtl8187: This seems a new V2 radio
rtl8187: PAPE from CONFIG2: 0
rtl8187: Driver probe completed
usbcore: registered new driver rtl8187
rtl8187: Card successfully reset
ADDRCONF(NETDEV_UP): wlan0: link is not ready
rtl8187: Setting SW wep key
rtl8187: Setting SW wep key
rtl8187: Setting SW wep key
rtl8187: Setting SW wep key
rtl8187: Setting SW wep key
rtl8187: Setting SW wep key
Linking with nesthaekchen
Linking with nesthaekchen
Associated successfully
Using G rates
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Linking with nesthaekchen
Linking with nesthaekchen
rtl8187: RX process aborted due to explicit shutdown
rtl8187: RX process aborted due to explicit shutdown
rtl8187: RX process aborted due to explicit shutdown
rtl8187: Setting SW wep key
rtl8187: Card successfully reset
Linking with nesthaekchen
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Associated successfully
Using G rates
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
rtl8187: Setting SW wep key
rtl8187: Setting SW wep key
rtl8187: Setting SW wep key
rtl8187: Setting SW wep key
rtl8187: Setting SW wep key
Linking with nesthaekchen
Linking with nesthaekchen
Associated successfully
Using G rates
wlan0: no IPv6 routers present
wlan0: no IPv6 routers present
st: Version 20050830, fixed bufsize 32768, s/g segs 256
end_request: I/O error, dev fd0, sector 0
pnp: Device 00:06 disabled.
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
pnp: Device 00:06 activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
parport0: Printer, Canon BJC-2100
lp0: using parport0 (interrupt-driven).
pnp: Device 00:06 disabled.
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
SFW2-INext-DROP-DEFLT-INV IN=wlan0 OUT= MAC=00:18:e7:1b:bb:72:00:13:49:f3:84:fd:08:00 SRC=85.25.132.30 DST=192.168.1.33 LEN=40 TOS=0x00 PREC=0x00 TTL=254 ID=65259 PROTO=TCP SPT=80 DPT=15354 WINDOW=1716 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=wlan0 OUT= MAC=00:18:e7:1b:bb:72:00:13:49:f3:84:fd:08:00 SRC=134.76.12.5 DST=192.168.1.33 LEN=40 TOS=0x00 PREC=0x00 TTL=254 ID=65259 PROTO=TCP SPT=80 DPT=16929 WINDOW=1984 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2133 DF PROTO=TCP SPT=16929 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A001063796ACB169E)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2134 DF PROTO=TCP SPT=16929 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A001063B36ACB169E)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2135 DF PROTO=TCP SPT=16929 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A001064276ACB169E)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2136 DF PROTO=TCP SPT=16929 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A0010650F6ACB169E)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2137 DF PROTO=TCP SPT=16929 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A001066DF6ACB169E)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2140 DF PROTO=TCP SPT=16929 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A0010803F6ACB169E)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2141 DF PROTO=TCP SPT=16929 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A00109D3F6ACB169E)
SFW2-INext-DROP-DEFLT-INV IN=wlan0 OUT= MAC=00:18:e7:1b:bb:72:00:13:49:f3:84:fd:08:00 SRC=134.76.12.5 DST=192.168.1.33 LEN=40 TOS=0x00 PREC=0x00 TTL=254 ID=65259 PROTO=TCP SPT=80 DPT=29732 WINDOW=1984 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=wlan0 OUT= MAC=00:18:e7:1b:bb:72:00:13:49:f3:84:fd:08:00 SRC=134.76.12.5 DST=192.168.1.33 LEN=40 TOS=0x00 PREC=0x00 TTL=254 ID=65259 PROTO=TCP SPT=80 DPT=29733 WINDOW=1984 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21584 DF PROTO=TCP SPT=29732 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A0012BBC76ACD8009)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21585 DF PROTO=TCP SPT=29732 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A0012BC006ACD8009)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21586 DF PROTO=TCP SPT=29732 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A0012BC726ACD8009)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21587 DF PROTO=TCP SPT=29732 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A0012BD566ACD8009)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21588 DF PROTO=TCP SPT=29732 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A0012BF1E6ACD8009)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21591 DF PROTO=TCP SPT=29732 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A0012D80E6ACD8009)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37619 DF PROTO=TCP SPT=29733 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A0012E49C6ACD802C)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37622 DF PROTO=TCP SPT=29733 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A0012FDFC6ACD802C)
SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.33 DST=134.76.12.5 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37623 DF PROTO=TCP SPT=29733 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A00131AFC6ACD802C)
SFW2-INext-DROP-DEFLT-INV IN=wlan0 OUT= MAC=00:18:e7:1b:bb:72:00:13:49:f3:84:fd:08:00 SRC=193.254.186.182 DST=192.168.1.33 LEN=40 TOS=0x00 PREC=0x00 TTL=254 ID=65259 PROTO=TCP SPT=3003 DPT=25168 WINDOW=1448 RES=0x00 RST URGP=0
nesthaekchen:/home/suimui/Documents #