rendered paste body[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Mar 13 23:32:38 UTC 2007 (Ubuntu 2.6.17-11.37-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f4e50
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 PM880 ) @ 0x000f6670
[17179569.184000] ACPI: RSDT (v001 PM880 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 PM880 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[17179569.184000] ACPI: MADT (v001 PM880 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff8000
[17179569.184000] ACPI: DSDT (v001 PM880 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:3 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:3 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2993.321 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.296000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.296000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.320000] Memory: 1029628k/1048512k available (1911k kernel code, 18136k reserved, 1073k data, 308k init, 131008k highmem)
[17179570.320000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.400000] Calibrating delay using timer specific routine.. 5993.19 BogoMIPS (lpj=11986388)
[17179570.400000] Security Framework v1.0.0 initialized
[17179570.400000] SELinux: Disabled at boot.
[17179570.400000] Mount-cache hash table entries: 512
[17179570.400000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[17179570.400000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[17179570.400000] monitor/mwait feature present.
[17179570.400000] using mwait in idle threads.
[17179570.400000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179570.400000] CPU: L2 cache: 1024K
[17179570.400000] CPU: Hyper-Threading is disabled
[17179570.400000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
[17179570.400000] Checking 'hlt' instruction... OK.
[17179570.416000] SMP alternatives: switching to UP code
[17179570.416000] checking if image is initramfs... it is
[17179570.848000] Freeing initrd memory: 5326k freed
[17179570.848000] ACPI: Core revision 20060707
[17179570.852000] ACPI: Looking for DSDT ... not found!
[17179570.976000] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[17179570.976000] SMP alternatives: switching to SMP code
[17179570.976000] Booting processor 1/1 eip 3000
[17179570.988000] Initializing CPU#1
[17179571.068000] Calibrating delay using timer specific routine.. 5985.58 BogoMIPS (lpj=11971163)
[17179571.068000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[17179571.068000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[17179571.068000] monitor/mwait feature present.
[17179571.068000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179571.068000] CPU: L2 cache: 1024K
[17179571.068000] CPU: Hyper-Threading is disabled
[17179571.068000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
[17179571.068000] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[17179571.068000] Total of 2 processors activated (11978.77 BogoMIPS).
[17179571.068000] ENABLING IO-APIC IRQs
[17179571.068000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.212000] checking TSC synchronization across 2 CPUs: passed.
[17179571.216000] Brought up 2 CPUs
[17179571.456000] migration_cost=0
[17179571.456000] NET: Registered protocol family 16
[17179571.456000] EISA bus registered
[17179571.456000] ACPI: bus type pci registered
[17179571.460000] PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=1
[17179571.460000] PCI: Using configuration type 1
[17179571.460000] Setting up standard PCI resources
[17179571.472000] ACPI: Interpreter enabled
[17179571.472000] ACPI: Using IOAPIC for interrupt routing
[17179571.472000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.472000] PCI: Probing PCI hardware (bus 00)
[17179571.476000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.0
[17179571.476000] PCI: Quirk-MSI-K8T Soundcard On
[17179571.476000] PCI: MSI-K8T soundcard on
[17179571.476000] Boot video device is 0000:01:00.0
[17179571.476000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.536000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[17179571.536000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12)
[17179571.540000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
[17179571.540000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179571.540000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179571.540000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179571.540000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179571.540000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179571.540000] ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
[17179571.540000] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[17179571.540000] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[17179571.540000] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[17179571.544000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.544000] pnp: PnP ACPI init
[17179571.548000] pnp: PnP ACPI: found 11 devices
[17179571.548000] PnPBIOS: Disabled by ACPI PNP
[17179571.548000] PCI: Using ACPI for IRQ routing
[17179571.548000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.596000] pnp: 00:02: ioport range 0x400-0x47f could not be reserved
[17179571.596000] pnp: 00:02: ioport range 0x500-0x50f has been reserved
[17179571.596000] PCI: Bridge: 0000:00:01.0
[17179571.596000] IO window: disabled.
[17179571.596000] MEM window: e0000000-e1ffffff
[17179571.596000] PREFETCH window: d8000000-dfffffff
[17179571.596000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.596000] NET: Registered protocol family 2
[17179571.652000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.652000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179571.652000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179571.652000] TCP: Hash tables configured (established 131072 bind 65536)
[17179571.652000] TCP reno registered
[17179571.652000] audit: initializing netlink socket (disabled)
[17179571.652000] audit(1176477882.652:1): initialized
[17179571.652000] highmem bounce pool size: 64 pages
[17179571.652000] VFS: Disk quotas dquot_6.5.1
[17179571.652000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.652000] Initializing Cryptographic API
[17179571.652000] io scheduler noop registered
[17179571.652000] io scheduler anticipatory registered
[17179571.652000] io scheduler deadline registered
[17179571.652000] io scheduler cfq registered (default)
[17179571.652000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179571.652000] isapnp: Scanning for PnP cards...
[17179572.004000] isapnp: No Plug & Play device found
[17179572.028000] Real Time Clock Driver v1.12ac
[17179572.028000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179572.028000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.028000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179572.028000] mice: PS/2 mouse device common for all mice
[17179572.032000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179572.032000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179572.032000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179572.032000] PNP: No PS/2 controller found. Probing ports directly.
[17179572.032000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179572.032000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179572.032000] EISA: Probing bus 0 at eisa.0
[17179572.032000] Cannot allocate resource for EISA slot 1
[17179572.032000] EISA: Detected 0 cards.
[17179572.032000] TCP bic registered
[17179572.032000] NET: Registered protocol family 1
[17179572.032000] NET: Registered protocol family 8
[17179572.032000] NET: Registered protocol family 20
[17179572.032000] Starting balanced_irq
[17179572.032000] Using IPI No-Shortcut mode
[17179572.032000] ACPI: (supports S0 S1 S4 S5)
[17179572.032000] Freeing unused kernel memory: 308k freed
[17179573.104000] Capability LSM initialized
[17179573.140000] ACPI: Fan [FAN] (on)
[17179573.144000] ACPI: Thermal Zone [THRM] (40 C)
[17179573.548000] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[17179573.548000] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[17179573.548000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[17179573.548000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[17179573.548000] PCI: Via IRQ fixup for 0000:00:0f.0, from 255 to 9
[17179573.548000] VP_IDE: chipset revision 6
[17179573.548000] VP_IDE: not 100% native mode: will probe irqs later
[17179573.548000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[17179573.552000] ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:DMA
[17179573.552000] ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:DMA
[17179573.552000] Probing IDE interface ide0...
[17179573.968000] hda: Maxtor 6Y080L0, ATA DISK drive
[17179574.248000] hdb: Maxtor 6Y120L0, ATA DISK drive
[17179574.304000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.336000] Probing IDE interface ide1...
[17179575.200000] hdc: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
[17179575.984000] hdd: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
[17179576.040000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.048000] hda: max request size: 128KiB
[17179576.056000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179576.056000] hda: cache flushes supported
[17179576.056000] hda: hda1
[17179576.060000] hdb: max request size: 128KiB
[17179576.060000] hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[17179576.060000] hdb: cache flushes supported
[17179576.060000] hdb: hdb1 hdb3 hdb4 < hdb5 >
[17179576.084000] hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
[17179576.084000] Uniform CD-ROM driver Revision: 3.20
[17179576.088000] hdd: ATAPI 16X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179576.432000] usbcore: registered new driver usbfs
[17179576.432000] usbcore: registered new driver hub
[17179576.436000] USB Universal Host Controller Interface driver v3.0
[17179576.436000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[17179576.436000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.436000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1
[17179576.436000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179576.436000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179576.436000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000d000
[17179576.436000] usb usb1: configuration #1 chosen from 1 choice
[17179576.436000] hub 1-0:1.0: USB hub found
[17179576.436000] hub 1-0:1.0: 2 ports detected
[17179576.540000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.540000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1
[17179576.540000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179576.540000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179576.540000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000d400
[17179576.540000] usb usb2: configuration #1 chosen from 1 choice
[17179576.540000] hub 2-0:1.0: USB hub found
[17179576.540000] hub 2-0:1.0: 2 ports detected
[17179576.644000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.644000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1
[17179576.644000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179576.644000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179576.644000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d800
[17179576.644000] usb usb3: configuration #1 chosen from 1 choice
[17179576.644000] hub 3-0:1.0: USB hub found
[17179576.644000] hub 3-0:1.0: 2 ports detected
[17179576.748000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.748000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1
[17179576.748000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179576.748000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179576.748000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000dc00
[17179576.748000] usb usb4: configuration #1 chosen from 1 choice
[17179576.748000] hub 4-0:1.0: USB hub found
[17179576.748000] hub 4-0:1.0: 2 ports detected
[17179576.780000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179576.872000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179576.872000] PCI: Via IRQ fixup for 0000:00:10.4, from 12 to 1
[17179576.872000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179576.872000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179576.872000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xe2010000
[17179576.872000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.872000] usb usb5: configuration #1 chosen from 1 choice
[17179576.872000] hub 5-0:1.0: USB hub found
[17179576.872000] hub 5-0:1.0: 8 ports detected
[17179577.040000] Attempting manual resume
[17179577.076000] kjournald starting. Commit interval 5 seconds
[17179577.076000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.304000] usb 1-1: device not accepting address 2, error -71
[17179578.496000] usb 5-1: new high speed USB device using ehci_hcd and address 2
[17179578.648000] usb 5-1: configuration #1 chosen from 1 choice
[17179578.888000] usb 5-2: new high speed USB device using ehci_hcd and address 3
[17179579.020000] usb 5-2: configuration #1 chosen from 1 choice
[17179579.628000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[17179579.808000] usb 2-1: configuration #1 chosen from 1 choice
[17179580.048000] usb 2-2: new full speed USB device using uhci_hcd and address 3
[17179580.220000] usb 2-2: configuration #1 chosen from 1 choice
[17179580.224000] hub 2-2:1.0: USB hub found
[17179580.224000] hub 2-2:1.0: 4 ports detected
[17179580.540000] usb 2-2.3: new low speed USB device using uhci_hcd and address 4
[17179580.668000] usb 2-2.3: configuration #1 chosen from 1 choice
[17179586.460000] Linux agpgart interface v0.101 (c) Dave Jones
[17179586.472000] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[17179586.480000] agpgart: AGP aperture is 128M @ 0xd0000000
[17179586.560000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179586.828000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179586.856000] parport: PnPBIOS parport detected.
[17179586.856000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179586.876000] Floppy drive(s): fd0 is 1.44M
[17179586.908000] FDC 0 is a post-1991 82077
[17179586.944000] input: PC Speaker as /class/input/input0
[17179587.128000] gameport: EMU10K1 is pci0000:00:09.1/gameport0, io 0xc400, speed 1084kHz
[17179587.152000] usbcore: registered new driver hiddev
[17179587.168000] input: Logitech Logitech USB Keyboard as /class/input/input1
[17179587.168000] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:10.1-1
[17179587.212000] input: Logitech Logitech USB Keyboard as /class/input/input2
[17179587.212000] input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:10.1-1
[17179587.212000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179587.216000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[17179587.216000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 185
[17179587.216000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 9
[17179587.220000] eth0: VIA Rhine II at 0x1e000, 00:11:5b:98:ca:95, IRQ 185.
[17179587.220000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[17179587.228000] input: USB Mouse as /class/input/input3
[17179587.228000] input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:10.1-2.3
[17179587.228000] usbcore: registered new driver usbhid
[17179587.228000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179587.244000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179587.340000] usbcore: registered new driver libusual
[17179587.372000] nvidia: module license 'NVIDIA' taints kernel.
[17179587.624000] NET: Registered protocol family 10
[17179587.624000] lo: Disabled Privacy Extensions
[17179587.624000] IPv6 over IPv4 tunneling driver
[17179587.628000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179587.628000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
[17179587.668000] SCSI subsystem initialized
[17179587.676000] Initializing USB Mass Storage driver...
[17179587.676000] scsi0 : SCSI emulation for USB Mass Storage devices
[17179587.676000] usb-storage: device found at 2
[17179587.676000] usb-storage: waiting for device to settle before scanning
[17179587.676000] scsi1 : SCSI emulation for USB Mass Storage devices
[17179587.676000] usb-storage: device found at 3
[17179587.676000] usb-storage: waiting for device to settle before scanning
[17179587.676000] usbcore: registered new driver usb-storage
[17179587.676000] USB Mass Storage support registered.
[17179587.692000] ts: Compaq touchscreen protocol output
[17179587.792000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 201
[17179588.192000] lp0: using parport0 (interrupt-driven).
[17179588.252000] Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5
[17179588.252000] PCI: Enabling device 0000:00:11.5 (0000 -> 0001)
[17179588.252000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[17179588.252000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 209
[17179588.252000] PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 1
[17179588.252000] via82cxxx: Six channel audio available
[17179588.252000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179588.264000] ac97_codec: AC97 codec, id: ALG96 (Unknown)
[17179588.264000] via82cxxx: Codec rate locked at 48Khz
[17179588.264000] via82cxxx: board #1 at 0x1000, IRQ 209
[17179588.292000] Adding 2120540k swap on /dev/disk/by-uuid/15cb9d44-91c1-48f6-bd8e-89aa2bb3a0ac. Priority:-1 extents:1 across:2120540k
[17179588.336000] EXT3 FS on hdb1, internal journal
[17179588.532000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179588.572000] NTFS volume version 3.1.
[17179589.888000] NET: Registered protocol family 17
[17179592.676000] usb-storage: device scan complete
[17179592.676000] usb-storage: device scan complete
[17179592.676000] Vendor: SEAGATE Model: ST3250824A Rev: 3.AA
[17179592.676000] Type: Direct-Access ANSI SCSI revision: 02
[17179592.712000] Vendor: HL-DT-ST Model: DVDRRW GSA-2164D Rev: 1.01
[17179592.712000] Type: CD-ROM ANSI SCSI revision: 00
[17179592.740000] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[17179592.740000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[17179592.748000] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[17179592.748000] sda: Write Protect is off
[17179592.748000] sda: Mode Sense: 53 00 00 08
[17179592.748000] sda: assuming drive cache: write through
[17179592.748000] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[17179592.748000] sda: Write Protect is off
[17179592.748000] sda: Mode Sense: 53 00 00 08
[17179592.748000] sda: assuming drive cache: write through
[17179592.748000] sda: sda1
[17179592.756000] sd 1:0:0:0: Attached scsi disk sda
[17179592.760000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[17179592.760000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[17179594.088000] ACPI: Power Button (FF) [PWRF]
[17179594.088000] ACPI: Power Button (CM) [PWRB]
[17179594.088000] ACPI: Sleep Button (CM) [SLPB]
[17179594.192000] ibm_acpi: ec object not found
[17179594.232000] pcc_acpi: loading...
[17179597.600000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179597.600000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179597.600000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179597.644000] eth0: no IPv6 routers present
[17179598.432000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179598.432000] apm: disabled - APM is not SMP safe.
[17179602.752000] Bluetooth: Core ver 2.8
[17179602.752000] NET: Registered protocol family 31
[17179602.752000] Bluetooth: HCI device and connection manager initialized
[17179602.752000] Bluetooth: HCI socket layer initialized
[17179602.772000] Bluetooth: L2CAP ver 2.8
[17179602.772000] Bluetooth: L2CAP socket layer initialized
[17179602.792000] Bluetooth: RFCOMM socket layer initialized
[17179602.792000] Bluetooth: RFCOMM TTY layer initialized
[17179602.792000] Bluetooth: RFCOMM ver 1.7
[17179616.248000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!