rendered paste body[ 0.000000] Linux version 2.6.20-14-generic (root@huffy) (gcc version 4.1.2 20061212 (prerelease) (Ubuntu 4.1.1-21ubuntu2)) #1 SMP Fri Apr 13 07:50:11 EDT 2007 (Ubuntu 2.6.20-14.23-generic)[ 0.000000] Command line: root=UUID=b67198d1-05b0-49eb-a279-2aeab78f80f7 ro quiet splash locale=de_DE[ 0.000000] BIOS-provided physical RAM map:[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)[ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used[ 0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 3200 used[ 0.000000] end_pfn_map = 1048576[ 0.000000] DMI 2.3 present.[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f6a60[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bfff3000[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bfff3040[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x00000000bfff7680[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000[ 0.000000] Scanning NUMA topology in Northbridge 24[ 0.000000] Number of nodes 1[ 0.000000] Node 0 MemBase 0000000000000000 Limit 00000000bfff0000[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used[ 0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 3200 used[ 0.000000] NUMA: Using 63 for the hash shift.[ 0.000000] Using node hash shift of 63[ 0.000000] Bootmem setup node 0 0000000000000000-00000000bfff0000[ 0.000000] Zone PFN ranges:[ 0.000000] DMA 0 -> 4096[ 0.000000] DMA32 4096 -> 1048576[ 0.000000] Normal 1048576 -> 1048576[ 0.000000] early_node_map[2] active PFN ranges[ 0.000000] 0: 0 -> 159[ 0.000000] 0: 256 -> 786416[ 0.000000] On node 0 totalpages: 786319[ 0.000000] DMA zone: 56 pages used for memmap[ 0.000000] DMA zone: 1087 pages reserved[ 0.000000] DMA zone: 2856 pages, LIFO batch:0[ 0.000000] DMA32 zone: 10695 pages used for memmap[ 0.000000] DMA32 zone: 771625 pages, LIFO batch:31[ 0.000000] Normal zone: 0 pages used for memmap[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.[ 0.000000] If you got timer trouble try acpi_use_timer_override[ 0.000000] ACPI: PM-Timer IO Port: 0x1008[ 0.000000] ACPI: Local APIC address 0xfee00000[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)[ 0.000000] Processor #0 (Bootup-CPU)[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)[ 0.000000] ACPI: IRQ9 used by override.[ 0.000000] ACPI: IRQ14 used by override.[ 0.000000] ACPI: IRQ15 used by override.[ 0.000000] Setting APIC routing to physical flat[ 0.000000] Using ACPI (MADT) for SMP configuration information[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000[ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data[ 0.000000] Built 1 zonelists. Total pages: 774481[ 0.000000] Kernel command line: root=UUID=b67198d1-05b0-49eb-a279-2aeab78f80f7 ro quiet splash locale=de_DE[ 0.000000] Initializing CPU#0[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)[ 24.715363] Console: colour VGA+ 80x25[ 24.717551] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)[ 24.720848] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)[ 24.721976] Checking aperture...[ 24.721981] CPU 0: aperture @ e8000000 size 128 MB[ 24.752061] Memory: 3084500k/3145664k available (2217k kernel code, 60776k reserved, 1163k data, 304k init)[ 24.831844] Calibrating delay using timer specific routine.. 3619.92 BogoMIPS (lpj=7239845)[ 24.831904] Security Framework v1.0.0 initialized[ 24.831910] SELinux: Disabled at boot.[ 24.831935] Mount-cache hash table entries: 256[ 24.832080] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)[ 24.832083] CPU: L2 Cache: 512K (64 bytes/line)[ 24.832086] CPU 0/0 -> Node 0[ 24.832103] SMP alternatives: switching to UP code[ 24.832283] Freeing SMP alternatives: 24k freed[ 24.832394] Early unpacking initramfs... done[ 25.165009] ACPI: Core revision 20060707[ 25.170279] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.[ 25.214101] Using local APIC timer interrupts.[ 25.269377] result 12561179[ 25.269379] Detected 12.561 MHz APIC timer.[ 25.271813] Brought up 1 CPUs[ 25.271848] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.[ 25.271851] time.c: Detected 1808.809 MHz processor.[ 25.272122] Time: 12:24:14 Date: 03/13/107[ 25.272159] NET: Registered protocol family 16[ 25.272241] ACPI: bus type pci registered[ 25.272248] PCI: Using configuration type 1[ 25.281543] ACPI: Interpreter enabled[ 25.281546] ACPI: Using IOAPIC for interrupt routing[ 25.282128] ACPI: PCI Root Bridge [PCI0] (0000:00)[ 25.282132] PCI: Probing PCI hardware (bus 00)[ 25.282660] Boot video device is 0000:01:00.0[ 25.282822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT][ 25.336184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT][ 25.337007] ACPI: Power Resource [ISAV] (on)[ 25.337267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT][ 25.338587] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.338887] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.339185] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.339485] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)[ 25.339799] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)[ 25.340101] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)[ 25.340398] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)[ 25.340701] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.340999] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.341300] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)[ 25.341604] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.341903] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)[ 25.342203] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)[ 25.342505] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.342806] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.343106] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.343413] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.343724] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.[ 25.344002] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.[ 25.344263] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.[ 25.344520] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.[ 25.344782] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.[ 25.345041] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.[ 25.345379] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.[ 25.345711] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.[ 25.346045] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.[ 25.346379] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.[ 25.346714] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.[ 25.347050] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.[ 25.347314] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.[ 25.347645] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.[ 25.348009] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.[ 25.348341] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.[ 25.348674] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.[ 25.349029] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.[ 25.349388] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.[ 25.351913] Linux Plug and Play Support v0.97 (c) Adam Belay[ 25.351928] pnp: PnP ACPI init[ 25.356751] pnp: PnP ACPI: found 12 devices[ 25.356805] PCI: Using ACPI for IRQ routing[ 25.356810] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report[ 25.356820] PCI: Cannot allocate resource region 0 of device 0000:00:00.0[ 25.356870] NET: Registered protocol family 8[ 25.356872] NET: Registered protocol family 20[ 25.356927] agpgart: Detected AGP bridge 0[ 25.356932] agpgart: Setting up Nforce3 AGP.[ 25.362630] agpgart: AGP aperture is 128M @ 0xe8000000[ 25.362996] pnp: 00:00: ioport range 0x1000-0x107f could not be reserved[ 25.362999] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved[ 25.363003] pnp: 00:00: ioport range 0x1400-0x147f has been reserved[ 25.363006] pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved[ 25.363009] pnp: 00:00: ioport range 0x1800-0x187f has been reserved[ 25.363012] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved[ 25.363282] PCI: Bridge: 0000:00:0b.0[ 25.363284] IO window: disabled.[ 25.363288] MEM window: f8000000-f9ffffff[ 25.363292] PREFETCH window: f0000000-f7ffffff[ 25.363296] PCI: Bridge: 0000:00:0e.0[ 25.363299] IO window: c000-cfff[ 25.363302] MEM window: fa000000-fbffffff[ 25.363305] PREFETCH window: c4000000-c40fffff[ 25.363315] PCI: Setting latency timer of device 0000:00:0e.0 to 64[ 25.363381] NET: Registered protocol family 2[ 25.399809] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 25.400413] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)[ 25.402675] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)[ 25.403234] TCP: Hash tables configured (established 262144 bind 65536)[ 25.403238] TCP reno registered[ 25.411871] checking if image is initramfs... it is[ 26.069968] Freeing initrd memory: 7078k freed[ 26.074502] audit: initializing netlink socket (disabled)[ 26.074515] audit(1176467055.312:1): initialized[ 26.074656] VFS: Disk quotas dquot_6.5.1[ 26.074672] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 26.074721] io scheduler noop registered[ 26.074724] io scheduler anticipatory registered[ 26.074726] io scheduler deadline registered[ 26.074738] io scheduler cfq registered (default)[ 26.098300] Real Time Clock Driver v1.12ac[ 26.098344] Linux agpgart interface v0.102 (c) Dave Jones[ 26.098346] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled[ 26.098454] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A[ 26.098591] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A[ 26.099023] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A[ 26.099224] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A[ 26.099404] mice: PS/2 mouse device common for all mice[ 26.099962] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize[ 26.100178] input: Macintosh mouse button emulation as /class/input/input0[ 26.100209] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2[ 26.100212] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx[ 26.100370] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1[ 26.100373] PNP: PS/2 controller doesn't have AUX irq; using default 12[ 26.355928] serio: i8042 KBD port at 0x60,0x64 irq 1[ 26.356019] TCP cubic registered[ 26.356027] NET: Registered protocol family 1[ 26.356157] ACPI: (supports S0 S3 S4 S5)[ 26.356202] Magic number: 3:609:430[ 26.356305] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)[ 26.356370] Freeing unused kernel memory: 304k freed[ 26.383681] input: AT Translated Set 2 keyboard as /class/input/input1[ 27.549327] Capability LSM initialized[ 28.086075] usbcore: registered new interface driver usbfs[ 28.086098] usbcore: registered new interface driver hub[ 28.086119] usbcore: registered new device driver usb[ 28.086909] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver[ 28.087298] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22[ 28.087306] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 22[ 28.087320] PCI: Setting latency timer of device 0000:00:02.0 to 64[ 28.087323] ohci_hcd 0000:00:02.0: OHCI Host Controller[ 28.087449] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1[ 28.087465] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfc003000[ 28.107822] SCSI subsystem initialized[ 28.113557] libata version 2.20 loaded.[ 28.157013] 8139too Fast Ethernet driver 0.9.28[ 28.173163] usb usb1: configuration #1 chosen from 1 choice[ 28.173195] hub 1-0:1.0: USB hub found[ 28.173205] hub 1-0:1.0: 4 ports detected[ 28.279617] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21[ 28.279627] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 21[ 28.279642] PCI: Setting latency timer of device 0000:00:02.1 to 64[ 28.279645] ohci_hcd 0000:00:02.1: OHCI Host Controller[ 28.279668] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2[ 28.279684] ohci_hcd 0000:00:02.1: irq 21, io mem 0xfc004000[ 28.341216] usb usb2: configuration #1 chosen from 1 choice[ 28.341242] hub 2-0:1.0: USB hub found[ 28.341252] hub 2-0:1.0: 4 ports detected[ 28.450802] pata_amd 0000:00:08.0: version 0.2.8[ 28.450912] PCI: Setting latency timer of device 0000:00:08.0 to 64[ 28.451311] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14[ 28.451340] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15[ 28.451355] scsi0 : pata_amd[ 28.583055] usb 1-3: new low speed USB device using ohci_hcd and address 2[ 28.787418] ata1.00: ata_hpa_resize 1: sectors = 25408559, hpa_sectors = 25410672[ 28.787424] ata1.00: Host Protected Area detected.[ 28.787425] current size : 25408559 sectors (13009 MB)[ 28.787427] native size : 25410672 sectors (13010 MB)[ 28.789986] usb 1-3: configuration #1 chosen from 1 choice[ 28.819560] ata1.00: ATA-5: Maxtor 91301U3, FA570480, max UDMA/66[ 28.819565] ata1.00: 25408559 sectors, multi 16: LBA [ 28.819572] ata1.01: ATAPI, max UDMA/33[ 28.831429] ata1.00: ata_hpa_resize 1: sectors = 25408559, hpa_sectors = 25410672[ 28.831433] ata1.00: Host Protected Area detected.[ 28.831435] current size : 25408559 sectors (13009 MB)[ 28.831436] native size : 25410672 sectors (13010 MB)[ 28.841764] ata1.00: configured for UDMA/66[ 29.007119] ata1.01: configured for UDMA/33[ 29.007130] scsi1 : pata_amd[ 29.098934] usb 1-4: new full speed USB device using ohci_hcd and address 3[ 29.175162] 00 00 12 a1 9e af: 0000000012a19eaf [ 29.175167] ata2.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808[ 29.175171] ata2.00: ATA-7: SAMSUNG SV1604N, TR100-24, max UDMA/100[ 29.175174] ata2.00: 312581808 sectors, multi 16: LBA48 [ 29.187154] 00 00 12 a1 9e af: 0000000012a19eaf [ 29.187157] ata2.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808[ 29.187160] ata2.00: configured for UDMA/100[ 29.187263] scsi 0:0:0:0: Direct-Access ATA Maxtor 91301U3 FA57 PQ: 0 ANSI: 5[ 29.190993] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A100 PQ: 0 ANSI: 5[ 29.191627] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SV1604N TR10 PQ: 0 ANSI: 5[ 29.194589] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19[ 29.194598] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19[ 29.194888] eth0: RealTek RTL8139 at 0xffffc2000001e000, 00:06:4f:06:80:7c, IRQ 19[ 29.194891] eth0: Identified 8139 chip type 'RTL-8100B/8139D'[ 29.196980] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19[ 29.197013] skge 1.9 addr 0xfb000000 irq 19 chip Yukon-Lite rev 9[ 29.197100] skge eth1: addr 00:0f:ea:ea:28:b0[ 29.197638] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20[ 29.197644] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 20[ 29.197653] PCI: Setting latency timer of device 0000:00:02.2 to 64[ 29.197657] ehci_hcd 0000:00:02.2: EHCI Host Controller[ 29.197683] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3[ 29.197713] ehci_hcd 0000:00:02.2: debug port 1[ 29.197717] PCI: cache line size of 64 is not supported by device 0000:00:02.2[ 29.197725] ehci_hcd 0000:00:02.2: irq 20, io mem 0xfc005000[ 29.197731] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004[ 29.197812] usb usb3: configuration #1 chosen from 1 choice[ 29.197839] hub 3-0:1.0: USB hub found[ 29.197846] hub 3-0:1.0: 8 ports detected[ 29.197880] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)[ 29.207067] usb 1-3: USB disconnect, address 2[ 29.211992] SCSI device sda: 25408559 512-byte hdwr sectors (13009 MB)[ 29.212006] sda: Write Protect is off[ 29.212009] sda: Mode Sense: 00 3a 00 00[ 29.212023] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 29.212078] SCSI device sda: 25408559 512-byte hdwr sectors (13009 MB)[ 29.212087] sda: Write Protect is off[ 29.212088] sda: Mode Sense: 00 3a 00 00[ 29.212102] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 29.212109] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >[ 29.305202] sd 0:0:0:0: Attached scsi disk sda[ 29.316289] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)[ 29.316333] sdb: Write Protect is off[ 29.316335] sdb: Mode Sense: 00 3a 00 00[ 29.316351] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 29.316404] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)[ 29.316412] sdb: Write Protect is off[ 29.316414] sdb: Mode Sense: 00 3a 00 00[ 29.316428] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA[ 29.316431] sdb: sdb1 sdb2 sdb3 sdb4[ 29.320866] sd 1:0:0:0: Attached scsi disk sdb[ 29.327361] sd 0:0:0:0: Attached scsi generic sg0 type 0[ 29.327507] sr 0:0:1:0: Attached scsi generic sg1 type 5[ 29.327648] sd 1:0:0:0: Attached scsi generic sg2 type 0[ 29.334319] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray[ 29.334324] Uniform CD-ROM driver Revision: 3.20[ 29.334538] sr 0:0:1:0: Attached scsi CD-ROM sr0[ 29.806554] Attempting manual resume[ 29.806558] swsusp: Resume From Partition 8:1[ 29.806561] PM: Checking swsusp image.[ 29.813527] PM: Resume from disk failed.[ 29.834177] ReiserFS: sda2: found reiserfs format "3.6" with standard journal[ 29.834187] ReiserFS: sda2: using ordered data mode[ 29.842020] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30[ 29.843468] ReiserFS: sda2: checking transaction log (sda2)[ 29.886615] ReiserFS: sda2: Using r5 hash to sort names[ 30.022734] usb 3-6: new high speed USB device using ehci_hcd and address 3[ 30.155492] usb 3-6: configuration #1 chosen from 1 choice[ 30.155554] hub 3-6:1.0: USB hub found[ 30.155656] hub 3-6:1.0: 4 ports detected[ 30.446683] usbcore: registered new interface driver hiddev[ 30.750575] usb 1-3: new low speed USB device using ohci_hcd and address 4[ 30.957532] usb 1-3: configuration #1 chosen from 1 choice[ 31.266460] usb 1-4: new full speed USB device using ohci_hcd and address 5[ 31.474427] usb 1-4: configuration #1 chosen from 1 choice[ 31.483421] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2[ 31.483439] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3[ 31.483450] usbcore: registered new interface driver usbhid[ 31.483454] drivers/usb/input/hid-core.c: v2.6:USB HID core driver[ 43.589341] skge eth1: enabling interface[ 43.667068] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1[ 44.280000] NET: Registered protocol family 10[ 44.280095] lo: Disabled Privacy Extensions[ 44.280210] ADDRCONF(NETDEV_UP): eth1: link is not ready[ 45.004624] NET: Registered protocol family 17[ 45.295076] skge eth1: Link is up at 100 Mbps, full duplex, flow control both[ 45.297683] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready[ 45.526048] pci_hotplug: PCI Hot Plug PCI Core version: 0.5[ 45.555445] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4[ 45.628900] input: PC Speaker as /class/input/input3[ 45.772966] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00[ 45.773002] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000[ 45.810553] parport: PnPBIOS parport detected.[ 45.810620] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA][ 45.946900] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3268[ 45.946914] usbcore: registered new interface driver usblp[ 45.946917] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver[ 46.439605] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22[ 46.439611] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 22[ 46.439636] PCI: Setting latency timer of device 0000:00:06.0 to 64[ 46.759067] intel8x0_measure_ac97_clock: measured 54725 usecs[ 46.759071] intel8x0: clocking to 46907[ 46.907299] fuse init (API version 7.8)[ 46.937364] lp0: using parport0 (interrupt-driven).[ 46.990292] Adding 1052216k swap on /dev/disk/by-uuid/e40c4903-4053-46d9-ad7c-335baab9e453. Priority:-1 extents:1 across:1052216k[ 46.990982] Adding 248968k swap on /dev/disk/by-uuid/9adce665-508f-4ca1-a53d-774c6713107a. Priority:-2 extents:1 across:248968k[ 53.518893] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com[ 54.765291] eth0: no IPv6 routers present[ 56.264961] eth1: no IPv6 routers present[ 63.082569] ReiserFS: sdb3: found reiserfs format "3.6" with standard journal[ 63.082581] ReiserFS: sdb3: using ordered data mode[ 63.088261] ReiserFS: sdb3: journal params: device sdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30[ 63.089709] ReiserFS: sdb3: checking transaction log (sdb3)[ 63.161324] ReiserFS: sdb3: Using r5 hash to sort names[ 63.286036] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled[ 63.286202] SGI XFS Quota Management subsystem[ 63.349035] XFS mounting filesystem sdb4[ 63.496354] Ending clean XFS mount for filesystem: sdb4[ 66.362838] Using specific hotkey driver[ 66.460014] No dock devices found.[ 66.552805] input: Power Button (FF) as /class/input/input4[ 66.557002] ACPI: Power Button (FF) [PWRF][ 66.581881] input: Power Button (CM) as /class/input/input5[ 66.586147] ACPI: Power Button (CM) [PWRB][ 66.632169] ibm_acpi: ec object not found[ 66.729943] pcc_acpi: loading...[ 66.919554] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)[ 66.919580] ACPI Exception (acpi_processor-0235): AE_NOT_FOUND, Evaluating _PSS [20060707][ 66.927032] powernow-k8: BIOS error - no PSB or ACPI _PSS objects[ 66.985366] ACPI Exception (acpi_processor-0235): AE_NOT_FOUND, Evaluating _PSS [20060707][ 72.567358] ppdev: user-space parallel port driver[ 78.983749] Bluetooth: Core ver 2.11[ 78.983805] NET: Registered protocol family 31[ 78.983807] Bluetooth: HCI device and connection manager initialized[ 78.983811] Bluetooth: HCI socket layer initialized[ 79.128612] Bluetooth: L2CAP ver 2.8[ 79.128617] Bluetooth: L2CAP socket layer initialized[ 79.379079] Bluetooth: RFCOMM socket layer initialized[ 79.379094] Bluetooth: RFCOMM TTY layer initialized[ 79.379096] Bluetooth: RFCOMM ver 1.8[ 84.438744] eth0: no IPv6 routers present