Miscellany

RedBoot> load -m tftp -r -b %{FREEMEMLO} -h 192.168.1.40 zImage
Raw file loaded 0x00054800-0x0018d553, assumed entry at 0x00054800
RedBoot> exec -c "noinitrd console=ttySA0 mem=64M"
Using base address 0x00054800 and length 0x00138d54
Uncompressing Linux.................................................................................... done, booting the .
Linux version 2.6.20oe1 (heiko@JODA2) (gcc version 4.1.2) #3 PREEMPT Sat Apr 7 15:57:34 CEST 2007
CPU: StrongARM-1110 [6901b118] revision 8 (ARMv4), cr=c000717f
Machine: Simpad
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists.  Total pages: 16256
Kernel command line: noinitrd console=ttySA0 mem=64M
PID hash table entries: 256 (order: 8, 1024 bytes)
Warning: uninitialized Real Time Clock
start_kernel(): bug: interrupts were enabled early
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 62208KB available (2368K code, 202K data, 96K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
SIMpad Registering HAL abstraction layer
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
mq200 video driver found Vendor: 0x4D51 Device: 0x200
MQ-200: DC00R = 0x0EF2082A
Console: switching to colour frame buffer device 100x37
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
Serial: SA11x0 driver $Revision: 1.50 $
sa11x0-uart.1: ttySA1 at MMIO 0x80010000 (irq = 15) is a SA1100
sa11x0-uart.3: ttySA0 at MMIO 0x80050000 (irq = 17) is a SA1100
input: Touchscreen panel as /class/input/input0
input: SIMpad Switches as /class/input/input1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
sa1100-0: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
SA1100 flash: CFI device at 0x00000000, 16MiB, 16-bit
sa1100-1: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
SA1100 flash: CFI device at 0x08000000, 16MiB, 16-bit
Concatenating MTD devices:
(0): "sa1100-0"
(1): "sa1100-1"
into device "sa1100"
RedBoot partition parsing not available
SA1100 flash: using static partition definition
Creating 3 MTD partitions on "sa1100":
0x00000000-0x00080000 : "SIMpad boot firmware"
0x00080000-0x00090000 : "SIMpad kernel"
mtd: partition "SIMpad kernel" doesn't end on an erase block -- force read-only
0x00090000-0x02000000 : "SIMpad root jffs2"
mtd: partition "SIMpad root jffs2" doesn't start on an erase block boundary -- force read-only
mice: PS/2 mouse device common for all mice
simpad-battery is configured to use the big size battery
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
No filesystem could mount root, tried:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)